<p> llllll</p><p>Attachment D</p><p>Pricing Proposal Exterior Surfaces Product Manufacturer Cost Unit Basis Asphalt Surfaces (zone/traffic marking for drive and parking areas, game lines, etc.) PTEX 2.1A Concrete Vertical Surfaces (including soffits) PTEX 3.1A PTEX 3.1B PTEX 3.1C PTEX 3.1D PTEX 3.1E PTEX 3.1F PTEX 3.1G PTEX 3.1H PTEX 3.1I PTEX 3.1J PTEX 3.1K Concrete Horizontal Surfaces (decks and stairs, parking areas and driveways, game lines, etc.) PTEX 3.2A PTEX 3.2B PTEX 3.2C PTEX 3.2E PTEX 3.2G Clay Masonry Units (pressed and extruded brick) PTEX4.1A PTEX 4.1B PTEX 4.1C PTEX 4.1D PTEX 4.1E PTEX 4.1F PTEX 4.1G PTEX 4.1H Concrete Masonry Units (concrete block and brick) PTEX 4.2A PTEX4.2B PTEX 4.2C </p><p>Pricing Proposal October 2009 Page D-1 Paint RFP#OCCM-2009-06 llllll</p><p>PTEX 4.2D PTEX 4.2E PTEX 4.2F PTEX 4.2G Product Manfacturer Cost Unit Basis PTEX 4.2H PTEX 4.2I PTEX 4.2J PTEX 4.2K PTEX 4.2L PTEX 4.2M Structural Steel And Metal Fabrications (columns, beams, joists, etc.) PTEX 5.1A PTEX 5.1B PTEX 5.1C PTEX 5.1D PTEX 5.1E PTEX 5.1F PTEX 5.1G PTEX 5.1H PTEX 5.1J Steel - High Heat (heat exchangers, breeching, pipes, flues, stacks, etc.) PTEX 5.2A PTEX 5.2B PTEX 5.2C PTEX 5.2D Galvanized Metal high contact/high traffic areas (doors, frames, railings, pipes, handrails, etc.) low contact/low traffic areas (overhead decking, eaves troughs (gutters), downpipes, ducts, etc.) PTEX 5.3A PTEX 5.3B PTEX 5.3C PTEX 5.3E PTEX 5.3F PTEX 5.3G </p><p>Pricing Proposal October 2009 Page D-2 Paint RFP#OCCM-2009-06 llllll</p><p>Aluminum (sash, sills and frames, flashing, handrails, posts and railings, gutters and downpipes, etc.) PTEX 5.4A PTEX 5.4B PTEX 5.4C PTEX 5.4D Copper PTEX 5.5A PTEX 5.5B Product Manufacturer Cost Unit Basis PTEX 5.5C PTEX 5.5D Glue Laminated Beams and Columns PTEX6.1A PTEX 6.1B PTEX 6.1C PTEX 6.1D PTEX 6.1E PTEX 6.1F PTEX 6.G PTEX 6.1H PTEX 6.1I PTEX 6.1J Dimension Lumber (columns, beams, exposed joists, underside of decking, siding, fencing, PTEX6.2A PTEX 6.2B PTEX 6.2C PTEX 6.2D PTEX 6.2E PTEX 6.2F PTEX 6.2G PTEX 6.2H PTEX 6.2I PTEX 6.2J Dressed Lumber (doors, door and window frames, casings, battens, smooth facias, etc.) PTEX6.3A PTEX 6.3B </p><p>Pricing Proposal October 2009 Page D-3 Paint RFP#OCCM-2009-06 llllll</p><p>PTEX 6.3C PTEX 6.3D PTEX 6.3E PTEX 6.3F PTEX 6.3G PTEX 6.3H PTEX 6.3I PTEX 6.3J PTEX 6.3K PTEX 6.3L PTEX 6.3M PTEX 6.4N Wood Paneling (plywood siding, fascias, soffits, etc.) PTEX6.4A Product Manufacturer Cost Unit Basis PTEX 6.4B PTEX 6.4C PTEX 6.4D PTEX 6.4E PTEX 6.4F PTEX 6.4G PTEX 6.4H PTEX 6.5.I Wood Decks And Stairs/Steps (using spaced lumber) PTEX 6.5A PTEX 6.5B PTEX 6.5C PTEX 6.5D PTEX 6.5E PTEX 6.5F PTEX 6.5G Wood Shingle And Shake Siding PTEX 6.6A PTEX 6.6B PTEX 6.6C Stucco (walls and soffits) PTEX9.1A PTEX 9.1B </p><p>Pricing Proposal October 2009 Page D-4 Paint RFP#OCCM-2009-06 llllll</p><p>PTEX 9.1C PTEX 9.1D PTEX 9.1E PTEX 9.1F PTEX 9.1G PTEX 10.1H Canvas and Cotton Coverings (pipes, ductwork, etc.) PTEX 10.1A PTEX 10.1B PTEX 10.1C PTEX 10.1D Bituminous Coated Surfaces (insulated pipes, trusses, siding, flashing, etc.) PTEX 10.2A PTEX 10.2B PTEX 10.2C PTEX 10.2D Interior Surfaces: Asphalt Surfaces (zone/traffic marking on interior drive and parking areas) PTIN 2.1A Product Manufacturer Cost Unit Basis PTIN 2.1B Concrete Vertical Surfaces (including soffits) PTIN3.1A PTIN 3.1B PTIN 3.1C PTIN 3.1D PTIN 3.1E PTIN 3.1F PTIN 3.1G PTIN 3.1H PTIN 3.1I Concrete Horizontal Surfaces ( floors and stairs, etc.) PTIN 3.2A PTIN 3.2B PTIN 3.2C PTIN 3.2D PTIN 3.2E PTIN 3.2F </p><p>Pricing Proposal October 2009 Page D-5 Paint RFP#OCCM-2009-06 llllll</p><p>PTIN 3.2G PTIN 3.2J Clay Masonry Units (including pressed and extruded brick) PTIN4.1A PTIN 4.1B PTIN 4.1C PTIN 4.1D PTIN 4.1E PTIN 4.1F PTIN 4.1G PTIN 4.1H PTIN 4.1I Concrete Masonry Units (concrete block and concrete brick) PTIN 4.2A PTIN 4.2B PTIN 4.2C PTIN 4.2D PTIN 4.2E PTIN 4.2F PTIN 4.2G PTIN 4.2H PTIN 4.2I PTIN 4.2J PTIN 4.2K Product Manufacturer Cost Unit Basis PTIN 4.2L Structural Steel and Metal Fabrications PTIN5.1A PTIN 5.1B PTIN 5.1C PTIN 5.1D PTIN 5.1E PTIN 5.1F PTIN 5.1G PTIN 5.1H PTIN 5.1I PTIN 5.1J </p><p>Pricing Proposal October 2009 Page D-6 Paint RFP#OCCM-2009-06 llllll</p><p>PTIN 5.1K PTIN 5.1L PTIN 5.1M PTIN 5.1O Steel - High Heat (boilers, furnaces, heat exchangers, breeching, pipes, flues, stacks, etc.) PTIN 5.2A PTIN 5.2B PTIN 5.2C PTIN 5.2D Galvanized Metal high contact/high traffic areas (doors, frames, railings, pipes, handrails, etc - low contact or low traffic areas (overhead decking, pipes, ducts, etc.) PTIN5.3A PTIN 5.3B PTIN 5.3C PTIN 5.3D PTIN 5.3E PTIN 5.3F PTIN 5.3G PTIN 5.3H PTIN 5.3I Aluminum PTIN5.4A PTIN 5.4B PTIN 5.4C PTIN 5.4D PTIN 5.4E PTIN 5.4F Copper PTIN 5.5A Product Manufacturer Cost Unit Basis PTIN 5.5B PTIN 5.5C PTIN 5.5D Glue Laminated Beams and Columns PTIN6.1A PTIN 6.1B PTIN 6.1C PTIN 6.1D </p><p>Pricing Proposal October 2009 Page D-7 Paint RFP#OCCM-2009-06 llllll</p><p>PTIN 6.1E PTIN 6.1F PTIN 6.1G PTIN 6.1H PTIN 6.1I PTIN 6.1J PTIN 6.1K PTIN 6.1L PTIN 6.1M Dimension Lumber (columns, beams, exposed joists, underside of decking, etc.) PTIN6.2A PTIN 6.2B PTIN 6.2C PTIN 6.2D PTIN 6.2E PTIN 6.2F PTIN 6.2G PTIN 6.2H PTIN 6.2I PTIN 6.2J PTIN 6.2K PTIN 6.2L Dressed Lumber ( including doors, door and window frames, moldings, etc.) PTIN6.3A PTIN 6.3B PTIN 6.3C PTIN 6.3D PTIN 6.3E PTIN 6.3F PTIN 6.3G PTIN 6.3H PTIN 6.3I PTIN 6.3J PTIN 6.3K Product Manufacturer Cost Unit Basis PTIN 6.3L PTIN 6.3M PTIN 6.3N </p><p>Pricing Proposal October 2009 Page D-8 Paint RFP#OCCM-2009-06 llllll</p><p>PTIN 6.3O PTIN 6.3P PTIN 6.3Q PTIN 6.3R PTIN 6.3S Wood Paneling And Casework (partitions, panels, plywood, veneer, millwork, etc.) PTIN6.4A PTIN 6.4B PTIN 6.4C PTIN 6.4D PTIN 6.4E PTIN 6.4F PTIN 6.4G PTIN 6.4H PTIN 6.4I PTIN 6.4J PTIN 6.4K PTIN 6.4L PTIN 6.4M PTIN 6.4N PTIN 6.4O PTIN 6.4P PTIN 6.4Q PTIN 6.4R PTIN 6.4S Wood Floors And Stairs (including hardwood floors) PTIN 6.5A PTIN 6.5B PTIN 6.5C PTIN 6.5D PTIN 6.5E PTIN 6.5F PTIN 6.5G PTIN 6.5H Spray Textured Surfaces (ceilings) PTIN 9.1A PTIN 9.1B PTIN 9.1C </p><p>Pricing Proposal October 2009 Page D-9 Paint RFP#OCCM-2009-06 llllll</p><p>PTIN 9.1D Plaster and Gypsum Board (gypsum wallboard, drywall, “sheet rock” type material, etc.) Product Manufacturer Cost Unit Basis PTIN9.2A PTIN 9.2B PTIN 9.2C PTIN 9.2D PTIN 9.2E PTIN 9.2F PTIN 9.2G PTIN 9.2H PTIN 9.2I PTIN 9.2J Acoustic Panels and Tiles PTIN 9.3A PTIN 9.3B PTIN 9.3C Canvas and Cotton Coverings (pipe and duct coverings, etc.) PTIN 10.1A PTIN 10.1B PTIN 10.1C Bituminous Coated Surfaces (including pipes and trusses, etc.) PTIN 10.2A PTIN 10.2B PTIN 10.2C </p><p>Sundries to include but not limited to caulking & putty, masking tape, wall joint tape and compound, sandpaper Sund-01 Sund-02 Sund-03 Sund-04 Sund-05 Sund-06 </p><p>Brushes and Rollers for Paint - All Sizes and Types Brsh-001 </p><p>Pricing Proposal October 2009 Page D-10 Paint RFP#OCCM-2009-06 llllll</p><p>Brsh-002 Brsh-003 Brsh-004 Brsh-005 Brsh-006 Specialized Hand Tools, Including Drop Cloths for Painting -(all Types and Sizes) Product Manufacturer Cost Unit Basis Tool-01 Tool-02 Tool-03 Tool-04 Tool-05 Tool-06 Applicator Systems/Equipment Appl-01 Appl-02 Appl-03 Appl-04 Appl-05 POWDER PAINT ONLY - (Statewide) PowPnt-01 PowPnt-02 PowPnt-03 PowPnt-04 PowPnt-05 PowPnt-06 </p><p>SIGN HERE -- Signature of Proposer</p><p>Print Name and Title of Proposer/Firm Name</p><p>Pricing Proposal October 2009 Page D-11 Paint RFP#OCCM-2009-06</p>