<p> Pharmacy Practice Meeting</p><p>1. Click on the following link to access the Pharmacy Practice Faculty Meeting through Wimba: http://uams.wimba.com/launcher.cgi?room=_uamsdev_s_18654278001_204015&X-Wimba- OrganizationUnit=&X-Wimba-ContextType=SECTION&X-Wimba-InstitutionLCID=2044122001&X- Wimba-IntegrationType=classroom&X-Wimba-RoomId=_uamsdev_s_18654278001_204015&X- Wimba-LCID=18654278001&X-Wimba-OrganizationType=&X-Wimba-OrganizationName=&X- Wimba-Account=_uamsdev_&X-Wimba-PlatformType=bbvista&X-Wimba-IntegrationVersion=4.0.0-1</p><p>2. On the new window, run the ‘Setup Wizard’.</p><p>3. The ‘Set Up’ will open in a new window. Start the setup and follow the instructions that each step says. (Note: If you plan to speak to the group during the meeting, follow the instructions for the ‘Playback’ step.) 4. When all steps are complete, click the finished link for the pop up ‘Wizard’ to close.</p><p>5. Back on the main Wimba page from step 2, click ‘Participant Login’. You may type your name for reference during the meeting after you click the ‘Participant Login” button. 6. Once clicked, the actual Wimba Classroom will open in a new window. 7. When the meeting begins, the PowerPoint will be shown in the space that currently says ‘Welcome to Pharmacy Practice Meeting’.</p><p>8. If during the meeting you would like to talk to the group, click and hold the ‘Talk’ button as shown below 9. If during the meeting you would like to ask a question through the ‘chat’ type your message in the space that is highlighted in yellow below and then click enter.</p><p>(Note: Most likely, the question will be answered verbally by the presenter and you will hear it through your computer speaker.)</p>