<p>CLUSTER Engineering and Technical</p><p>COURSE Integrated Electrical Lab</p><p>WVEIS CODE 1766</p><p>Course Description: This course introduces the student to the knowledge base and technical skills for concepts in the Integrated Electrical Lab. Areas of study include electrical installation project, rough-in procedure, test and check circuits and termination and trim-out. Emphasis will be placed on career exploration, job seeking skills and personal and professional ethics. Safety instruction is integrated into all activities. Students will utilize problem-solving techniques and participate in laboratory activities to develop an understanding of course concepts, and teachers should provide each student with real world learning opportunities and instruction related to course concepts.</p><p>SKILL SETS Electrical Installation Project Rough-In Procedure Test and Check Circuits Termination and Trim-Out Integrated Electrical Lab WVEIS 1766</p><p>Skill Set Electrical Installation Project Knowledge Objectives Students will demonstrate knowledge of</p><p>1766.1  an electrical installation project. Performance Objectives Students will</p><p>1766.2  layout an electrical floor plan. 1766.3  calculate the minimum number and type of branch circuits required. 1766.4  evaluate the plans to make certain that all codes and specifications are met. Skill Set Rough-In Procedure Knowledge Objectives Students will demonstrate knowledge of</p><p>1766.5  rough-in procedures. Performance Objectives Students will</p><p>1766.6  explain the sequential order in rough-in installation. 1766.7  complete installation according to floor plan. Skill Set Test and Check Circuits Knowledge Objectives Students will demonstrate knowledge of</p><p>1766.8  checking circuits. Performance Objectives Students will</p><p>1766.9  demonstrate proper use and application of electrical test equipment. 1766.10  verify that the electrical rough-in is done in a workmanlike manner. Skill Set Termination and Trim-Out Knowledge Objectives Students will demonstrate knowledge of</p><p>1766.11  termination and trim-out projects. Performance Objectives Students will </p><p>1766.12  verify that conductor length is maintained in all boxes for termination. 1766.13  conclude that conductors are electrically and mechanically secure. 1766.14  install devices and luminaries. 1766.15  install faceplates, covers and panel fronts. 1766.16  diagnose project. </p>