<p>Washington, D.C. TV Remote DVD Remote</p><p>Because this universal remote can control ON/OFF on the DVD Remote turns the several different components (TV, DVD, player on and off. CABLE receiver, etc.) it uses operational modes triggered by the component OR buttons. For example, if you want the remote to control the TV, you would press On the TV Remote, press component the TV button to put the remote into TV button DVD to set the remote to the mode before you could control the TV. correct component and then press the ON•OFF button to turn on the DVD Enjoy the comforts of home 1. Press the appropriate component button (DVD, TV, SAT•CABLE, Both TV & DVD Remotes: while focusing AUX, VCR1, VCR2) to set the remote to control the component. PLAY on your priorities. 2. Press ON•OFF to turn the Starts playing a disc. component ON or OFF. 3. Use the remote buttons that apply FORWARD to that component. Searches forward through the disc.</p><p>Note: If you keep pressing buttons and REVERSE nothing happens, the remote is probably Searches back through the disc. in the wrong mode. You must press the component button that matches the one STOP you want to operate (i.e., if you want to Stops playback. operate the DVD, press DVD on the remote control to put the remote in DVD PAUSE mode.) Freezes frames, frame advance, and slow motion.</p>