<p>11/19</p><p>● Pete will send barcode reader info on ○ Might not be needed… Leo can appreciate reluctance to implement if it won’t get used (although he’s amazed anyone wouldn’t use it in the first place) ● Put everything on SmartRails? ○ Probably; gotta make sure that wouldn’t interfere with anything (i.e. introduce more lag) ○ More compact, fewer protocols to deal with ● Calculation questions? Harry @ Pulsafeeder ([email protected]) ● Horner questions? Eric Broyer @ Horner ([email protected] or (317) 492-9102) ● Questions for Horner (already sent, pending response): ○ Lag time between query + response? ○ Can we queue up queries? ○ Delay on port? (Delay between transmit command and actual transmission; between receive command and actual register update) ○ How do we access smartrail data? Programming guide? Refresh rate? ● Next Tuesday, 11/26: Leo will attend the 10-12, no scheduled afternoon meeting on 11/26 (Tuesday before Thanksgiving) ● Q for Leo: Can we combine gate/DDR reviews? Probably difficult to get Pulsafeeder in on two separate occasions ○ The DDR review should be the yay/nay review where we can get the go-ahead ○ The Gate review gives us a chance to debrief on the semester - go over what we learned/didn’t learn, discuss grading, etc. ● Risk: How does VFD handle voltage transients? ● Hubbellock needed for high voltage connections ● Get a terminal strip and connector for power distribution ● Taylor - look up and justify wire gauge (done during class, but might still need to post results to Edge) ● Requirements for CSV header: ○ Pump/motor type ○ Serial number for pump/motor ○ Time (date) ○ Employee number ● We should have a go at the excel macros/formulas before asking for Harry’s Excel sheets (see above for email) ● Pete to work on wiring diagram ● Don’t forget peer reviews! (By Sunday, please!)</p>