<p> Attachment J-7 Amendment 1, RFP 1410-00002</p><p>Tables for OPTAA Instruments</p><p>This attachment contains Microsoft Word versions of the tables found in Section L.6.</p><p>Fill out Tables L-1 and L-2 with specifications of your proposed Optical Attenuation and Absorption instruments and include them in the Technical Volume of your proposal. Section L.6.1.2.1 provides detailed instructions for filling out these tables.</p><p>Table L-1 Optical Attenuation and Absorption (OPTAA) Instrument Compliance Matrix With Instrument Specifications in Attachment J-2 Parameter Value by Instrument Parameter Units OPTAA Series Substantiation Spec I.D. A B C D ABSO-001 Minimum value a(λ)/m ABSO-002 Maximum value a(λ)/m ABSO-003 Accuracy a(λ)/m ABSO-004 (threshold) Precision a(λ)/m ABSO-005 (objective) ABSO-006 Sampling frequency Hz ABSO-007 (threshold) nm to Wavelength range ABSO-008 nm (objective) # of ABSO-009 Number of bands bands ABSO-010 Spectral bandwidth nm ATTE-001 Minimum value c(λ)/m ATTE-002 Maximum value c(λ)/m ATTE-003 Accuracy c(λ)/m ATTE-004 (threshold) Precision c(λ)/m ATTE-005 (objective) ATTE-006 Sampling frequency Hz ATTE-007 (threshold) nm to Wavelength range ATTE-008 nm (objective) # of ATTE-009 Number of bands bands ATTE-010 Spectral bandwidth nm Operational depth Appendix m range Appendix Survivable depth m Life of internal Appendix months N/A N/A N/A battery</p><p>Ver 1-00 Page 1 of 5 Attachment J-7 Amendment 1, RFP 1410-00002</p><p>Tables for OPTAA Instruments</p><p>Parameter Value by Instrument Parameter Units OPTAA Series Substantiation Spec I.D. A B C D # of Appendix Internal Storage N/A N/A N/A samples</p><p>Table L-2 Optical Attenuation and Absorption (OPTAA) Instrument Compliance Matrix With Common Specifications in Attachment J-1 Parameter Value by Common Parameter Units OPTAA Series Substantiation Spec I.D. A B C D OPER-001 Salinity range PSS OPER-002 Temperature range oC Biofouling mitigation OPER-003 Yes/No measures provided? Biofouling mitigation provides specified OPER-004 accuracy for defined Yes/No (objective) deployment intervals? Maintains calibration within specified OPER-005 accuracy for defined Yes/No (objective) deployment intervals? Meets all performance requirements for OPER-006 defined deployment Yes/No intervals without need for physical maintenance? Deployed, recovered, OPER-007 redeployed without Yes/No performance impairment? Materials MECH-001 Instrument housing N/A used Instrument Materials MECH-002 N/A connector used MECH-003 Electronic housings MECH-004 m immersion depth MECH-005 Capable of operating Yes/No ELEC-001 in a +/- 50 VDC (if no, (objective) potential? voltage) Grounding with no ELEC-002 connection to Yes/No (objective) seawater? ELEC-003 Battery Life Months N/A N/A N/A</p><p>Ver 1-00 Page 2 of 5 Attachment J-7 Amendment 1, RFP 1410-00002</p><p>Tables for OPTAA Instruments</p><p>Parameter Value by Common Parameter Units OPTAA Series Substantiation Spec I.D. A B C D Returns to defined state upon being ELEC-004 Yes/No depowered and repowered? ELEC-005 (threshold) Isolation from mega ELEC-006 seawater ohms (objective) Provides internal DATA-001 Yes/No N/A N/A N/A N/A data storage? Powered by two wire INTF-001 Yes/No N/A floating voltages? INTF-002 Supply voltage Volts DC N/A List the INTF-003 Time Stamping supported N/A capabilities INTF-004 Internal clock? Yes/No N/A (objective) Synchronize/set INTF-005 clock over the Yes/No N/A interface? Data rate if over INTF-006 bits/sec N/A serial interface User settable data Yes/No INTF-007 rate over serial If yes, N/A (objective) maximum interface? serial rate Yes/No If yes, list INTF-008 Ethernet interface? the auto- N/A (objective) discovery mechanism (s) ACKs command INTF-009 execution including Yes/No N/A succeed/fail? Communications List the INTF-010 N/A interface(s) interfaces Remote control and INTF-011 Yes/No N/A access? Supports remote INTF-012 firmware Yes/No N/A (objective) installation? All data accessible remotely via INTF-013 Yes/No N/A communications interface? Supports polled Yes/No N/A operation? INTF-014 Supports (objective) asynchronous mode Yes/No N/A operation?</p><p>Ver 1-00 Page 3 of 5 Attachment J-7 Amendment 1, RFP 1410-00002</p><p>Tables for OPTAA Instruments</p><p>Parameter Value by Common Parameter Units OPTAA Series Substantiation Spec I.D. A B C D Communicate via INTF-015 Yes/No N/A N/A N/A N/A N/A inductive modem? Standards List the COMP-001 compatibility? standards Containers meet SHIP-001 ASTM D4169 Yes/No Level 1? Yes/No Stored without (if no, degradation SHIP-002 provide between -20 and temperature 50°C for 12 months? or time limitations) External cases labeled with safe SHIP-003 Yes/No N/A handling precautions? Indelible vendor IDEN-001 marking on external Yes/No N/A surface? Capable of OOI IDEN-002 marking without Yes/No N/A damage? Materials used and treated reduce wear, corrosion, and QUAL-001 Yes/No deterioration to allow multiple deployments?</p><p>Fill out Table L-3 with the models of your proposed Optical Attenuation and Absorption instruments and include the table in the Technical Volume of your proposal. Section L.6.1.2.1 provides detailed instructions for filling out this table.</p><p>Table L-3 Proposed Models for Optical Attenuation and Absorption Instruments OPTAA Contractor Instrument Model Number or Designation Series A B C D</p><p>Fill out Table L-4 and include it in the Past Performance Volume of your proposal. Section L.6.1.3 provides detailed instructions for filling out this table.</p><p>Ver 1-00 Page 4 of 5 Attachment J-7 Amendment 1, RFP 1410-00002</p><p>Tables for OPTAA Instruments</p><p>Table L-4. Past Performance for Each Contract</p><p>Effort name Company Performing the Effort Contract name Period of performance From DD/MM/YYYY to DD/MM/YYYY Contract value in $ Customer name and address Technical Point of contact information (name, phone number, e-mail) Contractual Point of contact information (name, phone number, e-mail) (extend as necessary)</p><p>Ver 1-00 Page 5 of 5</p>