<p> ASSIGNMENT DIRECTIONS STRUCTURAL DRAFTING</p><p>S - 4 Simple Parts Plan (coped beams) Draw a complete set of structural drawings for the assigned problem. Prepare a size "C" sheet of drawing paper using the assigned border and title block, bill of materials, and revisions block. Be sure to include North Arrow, Title, and General Notes. </p><p>Use the appropriate layers as needed for the structural details.</p><p>Do not use AutoCAD's default dimensioning parameters. Select the appropriate dimension style for each detail.</p><p>Prepare a set of structural drawings including the following:</p><p>¨ Engineering Drawing (Part Plan). Include all dimensions, beam designations, and end reaction loads. ¨ Erection Plan ¨ Connection detail "A" (W24 x 76 and W18 x 60). Include all appropriate dimensions. ¨ Connection detail "B" (W30 x 108 and W18 x 60). Include all appropriate dimensions. ¨ Shop drawing for the W24 x 76 beam. Include all appropriate dimensions. ¨ Shop drawing for the W30 x 108 beam. Include all appropriate dimensions. ¨ Shop drawing for the 18 x 60 beam. Include all appropriate dimensions.</p><p>Problem Specifications: Bolts are to be 3/4" diameter, ASTM A325-N. Three rows of bolts are to be used for the connections. Angles are 1/4" with edge distances of 1-1/4" Bolt spacing is 3" center to center The edge distance from the end of the W18 x 60 beam to the holes is 1-1/4" The tops of steel are flush Center to center distances are (from calculations)"</p><p>General Notes: SPEC: AISC, LRFD, 13TH EDITION MTL: ASTM A992 (FY = 50 KSI) HOLES: 13/16" DIAMETER BOLTS: 3/4" DIAMETER, ASTM A325-N PAINT: AS PER SPEC. ASSIGNMENT DIRECTIONS STRUCTURAL DRAFTING</p><p>Framing Plan  Dimensions  Beam designations  End reactions  Title and Scale</p><p>2 ASSIGNMENT DIRECTIONS STRUCTURAL DRAFTING</p><p>Connection Detail-A  Beam designations  Center to Center dimension  Gage outstanding leg (GOL) dimension  Cope cut dimensions (Q2 and Q1)  Hole spacing dimension  Assembly clearance dimension (C)  Setback dimension (1/2”)  Edge distance dimension for 3/4” diameter fastener  Title and Scale</p><p>3 ASSIGNMENT DIRECTIONS STRUCTURAL DRAFTING</p><p>Connection Detail-B  Beam designations  Center to Center dimension  Gage outstanding leg (GOL) dimension  Cope cut dimensions (Q2 and Q1)  Hole spacing dimension  Assembly clearance dimension (C)  Setback dimension (1/2”)  Edge distance dimension for 3/4” diameter fastener  Title and Scale</p><p>4 ASSIGNMENT DIRECTIONS STRUCTURAL DRAFTING</p><p>Shop drawing for the W18 x 60 beam  Cope cut dimensions  Hole spacing dimension  Assembly clearance dimension (C)  Setback dimension (1/2”)  Edge distance dimension for 3/4” diameter fastener  Beam length dimensions  Angle dimensions  Gage outstanding leg (GOL) dimension  Center to Center dimension  Title and Scale</p><p>5 ASSIGNMENT DIRECTIONS STRUCTURAL DRAFTING</p><p>Shop drawing for the W24 x 76 beam  Hole spacing dimension  Beam length dimensions  Center to Center dimension</p><p>6 ASSIGNMENT DIRECTIONS STRUCTURAL DRAFTING</p><p>Shop drawing for the W30 x 108 beam  Hole spacing dimension  Beam length dimensions  Center to Center dimension</p><p>7 ASSIGNMENT DIRECTIONS STRUCTURAL DRAFTING</p><p>Erection Plan  Beam designations  Erection marks  Title and Scale</p><p>8 ASSIGNMENT DIRECTIONS STRUCTURAL DRAFTING</p><p>Bill of Materials</p><p>General Notes</p><p>9</p>