<p>Name </p><p>Cisco Networking Semester 1 Mid-Term Study Questions</p><p>Questions for Day 3 1. Which part of the IP Address identifies a specific device on a network?</p><p>2. What workstation installation and setup tasks are concerned with network access layer functions? (2 answers)</p><p>3. Using the data transfer calculation T=S/BW, how long would it take a 4 MB file to be sent over a 1.5Mbps connection?</p><p>4. A small company has a class C network license and needs to create five useable subnets, each subnet capable of accommodating at least 20 hosts. What would be the subnet mask?</p><p>5. What is established during a connection-oriented file transfer between computers? (2 answers)</p><p>6. To make sure timing limitations are not violated when implementing a 10Mbps Ethernet network involving hubs or repeaters, a technician should adhere to which rule?</p><p>7. What device must be used between an AUI port of a networking device and the media to which being connected?</p><p>8. Which layer of the OSI model covers the physical media?</p><p>9. What does the 10 in 10 BASE2 indicated about this version of Ethernet?</p><p>10. What are the features of the TCP/IP Transport Layer? (2 answers)</p><p>11. What are useable Class A IP addresses with a default subnet mask?</p><p>12. If a network administrator needed to download files from a remote server, which protocols could the administrator uses to remotely access those files? (2 answers) 13. What service is used to translate a web address into an IP Address?</p><p>14. What is the standard when using Ethernet? (3 answers)</p><p>15. A company with a Class B license needs to have a minimum of 1,000 subnets with each subnet capable of accommodating 50 hosts. What would be the appropriate mask?</p>