<p> IS0 9001 Reg. (WDR) WAIVER / DEVIATION REQUEST</p><p>Supplier Fill Out This Section Supplier Internal Customer Supplier Name PO# NCP Date Supplier Contact QTY Part Number Part Desc Serial Number(s) Rev *Request Waiver Deviation</p><p>* Use waiver when nonconformance is found after manufacturing, deviation, if before manufacturing. Description of Nonconformance:</p><p>Causes:</p><p>Correction: (Supplier only - Include statement indicating time for replacement parts, if waiver is disapproved)</p><p>SRCTec Fill Out This Section WDR # Program Contract Name Number Class 1 Class 2 Design Engineering Analysis: </p><p>Comments: Disposition Use As Is Repair</p><p>Waiver Approvals: Signatures required: Customer - All Internal – PM, QE Supplier – QE, DE, Purch. Quality Engineer: Date</p><p>Manufacturing Engr: Date</p><p>Materials: Date</p><p>Purchasing: Date</p><p>Design Engineering: Date</p><p>Program Manager: Date</p><p>DCMA/Customer: Date</p><p>Approved Disapproved WDR #</p><p>Page 1 of 1 Revised 3/3/14</p>