<p>Paul Totten, PE, LEED AP BD + C</p><p>Courses Taught: ARPL539-02 Building Science and Technology</p><p>Educational Credentials: Bachelor of Applied Science, Civil Engineering, University of Waterloo, Waterloo, Ontario, Canada, 1997</p><p>Teaching Experience: Lecturer, The Catholic University of America, 2011-present</p><p>Professional Experience: Senior Principal, Halsall, A Division of Parsons Brinckerhoff, Inc. Washington DC, 2013-present Simpson Gumpertz Heger, 2005-2012</p><p>Licenses/Registration: DC, GA, MD, PA, VA</p><p>Selected Publications and Recent Research:  Totten, P.E., and A. Smith, “Building Enclosure Commissioning of a Student Athletic Facility,” BEST 3 Conference, Atlanta, GA, April 2012.  Totten, P.E., “Retrofitting And Modernization Of Existing Buildings,” The 13th Canadian Conference on Building Science & Technology, Winnipeg, Manitoba, Atlanta, GA, May 2011.  Totten, P.E., and M. Pazera, “Designing Building Enclosures,” Consulting Specifying Engineer, January/February 2011.  Nelson, P.E., and P. Totten, “Improving the Condensation Resistance of Fenestration by Considering Total Building Enclosure and Mechanical System Interaction,” ASTM E06 Symposium on Condensation in Exterior Building Wall Systems, San Antonio, TX, October 2010.  Totten, P.E., and M. Pazera, “Thermal Inefficiencies in Building Enclosures – Causes of Moisture Related Performance Problems,” BEST 2 Conference, Portland, OR, April 2010.  Totten, P.E., and M. Pazera, “Improving Building Enclosures Thermal Performance as a Goal of Energy Efficiency,” ASCE Fifth Forensics Congress, November 2009.  Totten, P.E., “Building Enclosure and Building Systems Commissioning for Sustainable Structures,” RCI Foundation, April 2009.  Totten, P.E., and R. Hodge, “Sidwell Friends Middle School – Building Enclosure Panel System Design,” RCI Foundation, April 2009.  Heule, M.J., S. McGuire, P.E, Totten and L. Harriman, “Richard Bolling Federal Building: Modernization and Energy Efficiency Upgrades,” Journal of Building Enclosure Design, winter 2009.  Totten, P.E., “Building Enclosure Commissioning Process,” Building Enclosure Science and Technology 1, Minneapolis, MN, June 2008.  Totten, P.E., S.M. O’Brien, and M. Pazera, “The Effects of Thermal Bridging at Interface Conditions,” Building Enclosure Science and Technology 1, Minneapolis, MN, June 2008.  Totten, P.E., and S. O’Brien, “Air Barriers in High Interior RH Specialty Buildings: Considerations for Control of Moisture-Laden Air in Museums, Labs, and Natatoriums,” Oakridge National Laboratories Buildings X, Clearwater, FL, December 2007.</p><p>Professional Memberships: Member, ASHRAE, National Institute of Building Sciences, USGBC NCR Chapter Education Committee Chair, NIBS Building Enclosure Technology and Environment Council (BETEC) Committee Member, NIBS Consultative Council – Topical Committee on High Performance Building Metrics Committee Member and Lecturer, AIA DC 2030 Challenge and High Performance Building Committee Past Co-Chair, Washington, DC AIA/NIBS</p>