<p>ISSMGE - ETC 3 International Symposium on Design of Piles in Europe. Leuven, Belgium, 28 & 29 April 2016 <Title of the paper (e.g. Design of piles – Belgian practice)></p><p><Name Author 1 Company, Country, e-mail></p><p><Name Author 2 Company, Country, e-mail></p><p><…></p><p>ABSTRACT</p><p><Text of the abstract></p><p>1. REGIONAL GEOLOGY</p><p>1.1. Heading 2</p><p>1.1.1. Heading 3 <Text></p><p>Table 1 : Xxxx</p><p>Photo 1 :</p><p>Figure1 :</p><p>(1)</p><p>2. SOIL INVESTIGATION <Current practice></p><p>3. PILING TECHNOLOGY & CLASSIFICATION <Brief description of commonly used pile types and classification></p><p>4. NATIONAL DOCUMENTS <National relevant documents for the application of EC7> <Principal Author> - <Title> 1/3 5. DESIGN METHOD ACCORDING TO THE PRINCIPLES OF EUROCODE 7</p><p>5.1. General principles <Geotechnical Categories, Design Approach, Methodology,…></p><p>5.2. Definitions and symbols <Text></p><p>5.3. ULS Design based on soil investigation test results <Including installation, model, correlation and safety factors></p><p>5.3.1. Introduction <Text></p><p>5.3.2. Axial compression of a single pile <Text></p><p>5.3.3. Axial tension of a single pile <Text></p><p>5.3.4. Lateral loading of a single pile <Text></p><p>5.3.5. Specific issues <Negative skin friction, group effect, cyclic loading, seismic design (if seismicity is not taken into account, please mention),…></p><p>5.3.6. Problems not covered by National Annexes and future developments <Text></p><p>5.4. SLS design <Including observational method for SLS design></p><p>5.5. Design based on load tests <If not used in your country : please mention this. Don’t delete the paragraph.></p><p>5.6. Design based on experience <If not used in your country : please mention this. Don’t delete the paragraph.></p><p>5.7. Structural safety <Text></p><p>6. QUALITY CONTROL, MONITORING AND TESTING PRACTICE <Including if and how quality control influences the design></p><p>7. PARTICULAR NATIONAL EXPERIENCES AND DATABASES <Particular national experiences and databases with pile load tests></p><p><Author> - <Title> 2/3 ISSMGE - ETC 3 International Symposium on Design of Piles in Europe. Leuven, Belgium, 28 & 29 April 2016</p><p>8. DESIGN EXAMPLE <This is an example of the most commonly used design method of an axially loaded pile, chosen by the author, to illustrate the design method></p><p>REFERENCES</p><p>Author, Year, Title, Journal/ Place of issue/Editor</p><p><Author> - <Title> 3/3</p>