<p>Instruction on Registering PCDJ FX & KJ VRM </p><p>Register FX VRM</p><p>Click on Icon on your desktop " PCDJ FX VRM"</p><p>A window will pop up with the following </p><p>Site Code XXXXXXXX MID Code XXXXXXXXXXXXXX INIT Code (blank)</p><p>Please write the MID and Site codes as it appears </p><p>Click on Register PCDJ FX VRM Icon in your desktop (fill the form with all the codes required) Then click register (make sure you enter a valid email address since because that is where you will receive your INIT CODE)</p><p>Once you receive you INIT CODE via e-mail, enter it as it appears in the initial window where you got your codes (MID & Site). Then click continue</p><p>FX should be running by now (if not call support 1-866-999-7235) Please note that from now on your FX program is the PCDJ FX VRM Icon on your desktop anything else in your desktop is irrelevant to the program</p><p>REGISTER KJ</p><p>Install KJ from the Link received from Visiosonic via e-mail</p><p>Open PCDJ FX VRM </p><p>On the top title bar next to SKIN there is a button that reads "rc" and right next to it there is a + and - buttons</p><p>Click on + until KJ appears on your screen</p><p>Right under the logo click on CFG and write the Machine ID as it appears on your screen Click on Register KJ that appears on your desktop and fill up the form and click "Get Activation"</p><p>Note that you will receive an email to the email address submitted to register FX</p><p>Enter the activation code in the appropriate text box in the KJ CFG then click ok </p>