<p>PROJECT:</p><p>L20/ REVOLVING DOORS</p><p>Manufacturers DORMA UK LTD. WILBURY WAY, HITCHIN, SG4 0AB. Tel: +44 (0)1462 477 600, Email: [email protected] Web: www.dorma.com</p><p>Dimensions: Internal Diameter ______(2000mm – 3600mm*)</p><p>Number of wings ______(3 or 4 wing)</p><p>Clear Opening height ______(2000mm – 4000mm*)</p><p>(*Refer to technical brochure for diameter to height dependency table)</p><p>Operating System DORMA KTV-A Glazed Automatic Revolving Door with solid canopy</p><p> Central axis automatic revolving door  Canopy mounted automatic drive unit  Anti vandalism brake (Option)  Ceiling integrated down lights </p><p>Activation and safety  Comprehensive radar and presence sensing safety system comprising movement sensors and passive and active safety devices</p><p>Drum Walls  Curved Framed Safety Glass (Option)  Metal Panelling (Option)  Central Midrails (Option)</p><p>Door Wings  Framed safety glass with central column (Option)  Fine framed safety glass without central column (Option)  Central Midrails (Option with central column)</p><p>Solid Canopy  Minimum 200mm canopy height finished in selected profile coating  Prepared for rain proofing  Manual external night shield (Option)  Manual internal night shield (Option)</p><p>Stainless Steel Floor Ring  Free issued by DORMA and installed by others  Floor matting by others</p><p>Aluminium Profile Finish  Satin Anodised (Option)  Standard RAL (Option)  Stainless Steel (Option)  Bronze Anodised (Special finish on request)</p><p>Break Out Facility Required (Option) Not required (Option)</p><p>Locking Facility Euro profile mechanical locking in the door wings (Option)</p><p>Applicable Standards The installation shall comply with BS EN 16005</p><p>Electrical Requirements The electrical contractor shall provide a 240-volt AC mains spur to the right-hand side of the opening above and on the same face that each drive unit is fitted. The spur must be switched and fused with a central flex outlet faceplate. A 10 amp residual circuit breaker at the mains board and a 5-amp fuse at the spur shall protect the circuit.</p>