Sunroom and Patio Cover Requirements 12-2016.Doc"

Sunroom and Patio Cover Requirements 12-2016.Doc"

City of Santa Clara Building Division: 408-615-2440 Building Division Email: [email protected] 1500 Warburton Ave. Permit Center: 408-615-2420 Santa Clara, CA 95050 Email: [email protected] www.santaclaraca.gov Automated Inspection Scheduling System: 408-615-2400 SUNROOM AND PATIO COVER REQUIRMENTS Building Permits are required for all sunrooms and patio covers. Electrical permit is required where electrical work will be done. Planning approval is required prior to submission of plans to Building for review. Sunrooms Construction of sunrooms shall comply with the requirements of AAMA/NPEA/NSA 2100, and are identified as one of the following categories: • Category I: A thermally isolated* sunroom with walls that are open or enclosed with insect screening or plastic film, maximum thickness of 0.5mm(unconditioned and non-habitable). • Category II: A thermally isolated* sunroom with walls that are enclosed with translucent or transparent plastic or glass (unconditioned and non-habitable). • Category III: A thermally isolated* sunroom with walls that are enclosed with translucent or transparent plastic or glass which complies with additional air infiltration and water penetration resistance (unconditioned and non-habitable). • Category IV: A thermally isolated* sunroom with enclosed walls that is designed to be heated or cooled by a separate temperature control or system that meets thermal performance requirements, complies with air infiltration and water penetration resistance and is thermally isolated from the primary structure (non-habitable and conditioned). • Category V: A sunroom with enclosed walls that is designed to be heated or cooled and is open to the main structure. Fenestration complies with additional requirements for water penetration and air infiltration resistance as well as thermal performance (habitable and conditioned). * Physical and space conditioning separation from conditioned spaces consisting of existing or new walls, doors and/or windows. The conditioned spaces shall be controlled as separate zones for heating and cooling or conditioned by separate equipment. Plan Submittal for Review of Sunrooms and Patio Covers Submit three sets of plans, minimum size 11” x 17” showing: 1. Plot Plan – showing location of new construction, and also location of all other buildings on the lot. This plot plan should show all front, side and rear setback distances, distances between buildings, and all easements. 2. Framing and wall system details – showing wall channel details, window details. Also show connections to footings and house. 3. Elevations – showing all sides of the proposed structure 4. Wind load calculations where applicable 5. Product Evaluation Report where applicable 6. Electrical plan showing lighting and receptacles where applicable "I:\BLDG\FINAL\FORMS\Informational\RB02 Sunroom and Patio Cover Requirements_12-2016.doc" .

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    1 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us