<p>[Company Logo] Company Name</p><p>Safe Work Procedure – Snowmobile</p><p>PERSONAL PROTECTIVE EQUIPMENT: Helmet Eye protection Gloves Cold weather clothing (Speed=frostbite) Suitable winter boots</p><p>PROCEDURES FOR LOADING AND UNLOADING  Load at a purpose built stationary ramp or use a snow or dirt berm.  If using portable ramps secure ramps to truck using tie down straps.  Once loaded secure snowmobile fore and aft using proper straps.</p><p>DRIVING  Do a pre-trip check of machine- brakes, throttle, steering linkage, sufficient fuel, mix oil.  Check for spares –plug, drive belt and tools.  Check survival kit –snowshoes to walk home; tarp; axe; matches.  Travel plan left with another person?  Spot device activated?  Driver is responsible for passenger.  Drive at safe speeds.  Reduce speed for ditches, berms, and obstacle climbing.  Lean into turns; lean into hills.  Keep your feet on the running boards at all times. Do not use your feet to control the machine.  Be alert for branches and overhead hazards.  Don’t drive into unknown situations (you could be stuck until spring).  Do not operate the snowmobile if it is mechanically defective.  Conduct a post trip check and have deficiencies rectified.</p><p>ADDITIONAL SWP NOTES</p><p>06312acc851c7627bb2207e49d279def.doc Page 1 of 1 Revised: March 20, 2013</p>