<p> KBD 1050 – LIGHTING FOR KBD</p><p>EXERCISE 4 – LIGHTING/ELECTRICAL PLAN</p><p>OBJECTIVE:</p><p>With a given plan, complete a lighting and electrical plan as per NKBA specifications and in a method that is the most energy efficient approach possible – in selecting both fixtures and lamps.</p><p>JOB TASK:</p><p>Complete lighting and electrical plan including kitchen, dinette, hallway and half bath in plan.</p><p>PROCEDURE:</p><p>1) Trace complete floor plan – and use measures that you read on your scale once you have traced the plan.</p><p>2) Determine the following – all of kitchen area, bath and back hallway:</p><p> a. Outlets throughout and labeled appropriately including location AFF(above finished floor)</p><p> b. Lighting source location and types; dimensioned as to location as it related to perimeter walls and each other – i.e. recessed cans as they related to all 4 walls and to each other – centerline to the center of the location of the can or fixture. Select light sources (both fixtures and lamps) that are as energy efficient as possible.</p><p> c. Switches for lighting and appliances as needed with proper and accurate connecting lines; note the AFF of the switches as well – either on the plan or within your legend (i.e. all switches at 48” AFF)</p><p>3) Include legend of symbols with their definition on plan as per NKBA’s requirements; usually located to the right of the floor plan.</p><p>4) Label with name, scale and date.</p><p>5) Create specifications that promote your design and demonstrating a sustainable solution.</p><p>6) Make copy to submit; you may scan and put in Dropbox or fax for submission.</p><p>DUE DATE: Due the last week of class – no later than the last week of the semester.</p>