Deluxe Marking Harness #501020 C B Features Male Buckle Male Buckle • Wide, soft nylon straps—distributes pressure more evenly over the ram’s body. • Padding at the arms and brisket. • Large buckles and loops—harness connection and stress points are reinforced. Gloved hands can manipulate the large buckles. • Crayons easily changed. See reverse side. Fitting Instructions: 1. Identify the straps. a) The shoulder straps have male buckles only. b) The girth strap is the strap with metal rings and buckles. 2. Fasten the girth strap first.­­ With the crayon holder in position between the ram’s front legs, bring the girth strap with the male buckle (A) over the back of the ram and snap it into the female buckle (A). Adjust strap to a tight fit. legs) of front (in Strap Shoulder Shoulder Strap (in front of legs) 3. Fasten the shoulder straps next. Pull one shoulder strap (B) up the side of the ram’s neck, cross it diagonally over its shoulder and buckle it to the female connection (B) on the opposite side of the girth strap. Do the same for buckle (C). The two shoulder straps should cross on top of the ram’s shoulders and be adjusted so that the crayon holder lies B Female Buckle securely and centrally between the ram’s front legs. C Female Buckle 4. The harness may need to be readjusted after the first on Holder ay 1 - 2 days to compensate for settling in. Look at your ram Girth Strap (behind legs) Cr every day to see if an adjustment is needed or if a new A crayon should be installed. Male Buckle Female Buckle A Marking Crayon Insertion Instructions 1. If using metal cotter pin, 2. Take the plastic cap off 3. Slide the crayon into 4. Line up the holes in the remove from the packaging. (protects crayon during the harness by inserting the harness with the holes in the The plastic pins are provided transport). Pull at side and narrow end first. crayon. loose. push through top as shown. 800-282-6631 premier1supplies.com 5a. Metal Cotter Pin—Take 5b. Once the cotter pin is ©Copyright 2016, Premier1Supplies the metal cotter pin and pushed through all the way All rights reserved. push all the way through the bend back the ends flush with middle holes of the harness. the crayon..