Rifle System Accuracy International Was Formed in 1978 to Design and Build Tactical Rifles

Rifle System Accuracy International Was Formed in 1978 to Design and Build Tactical Rifles

AW rifle system Accuracy International was formed in 1978 to design and build tactical rifles. The original design ethos combined two factors into an unique package: namely the incorporation of performance enhancing features learned in Olympic and international target shooting onto a rifle platform exhibiting full military ruggedness. The current designs faithfully follow this original concept but also benefit from twenty years of continuous improvement. These improvements are not cosmetic but are driven solely by the needs of users, highly trained military and police units in over 50 countries world-wide. Such units are exposed to ‘live’ tactical situations on a daily basis and in the most demanding environments where first shot accuracy is critical. The rifles are produced in a purpose built 20,000sq. ft. facility in the UK. All components are manufactured to Accuracy International designs to ensure that they are optimised for the function they must perform, something that cannot be achieved with a ruggedised sporting weapon. Products are produced under a management system certified to BS EN ISO 9001. Threaded muzzle brake & Iron sights Slings muzzle brake thread protector Used as a backup in case of failure of the telescopic sight Description Part No. Description Part No. (rifles must be fitted with muzzle brakes) Standard Sling Green 0647 Threaded Muzzle Brake 1937 Description Calibre Mounting Part No. Combined carrying Black 3700 Replaces standard muzzle brake Iron Foresight All Muzzle brake 1812 and single point shooting sling and provides a mounting for the Disc Type Rearsight .308win/.338lap mag AI Dovetail 1115 Biathlon Sling 1861 iron foresight or a mirage band Allows a rucksack style carrying Disc Type Rearsight .308win/.338lap mag MIL-STD 1913 Rail 3309 AW Muzzle Brake Thread Protector 1127 position for maximum comfort over Protects thread when the tactical Disc Type Rearsight .300 win mag AI Dovetail 2093 long distances rifle system supressor is not fitted Disc Type Rearsight .300 win mag MIL-STD 1913 Rail 4501 Plastic transit case Handstops One piece sight mounts Description Part No. Description Part No. Sight Tube Sight Line A plastic case with custom Handstop 1032 Dia. (mm) Mounting Angle (m.o.a.) Part No. foam interior Provides a repeatable fore end hand 30 AI Dovetail 28 3051 Black (not available in USA) 4672 position 30 AI Dovetail 0 4497 Green (USA only) 4443 Handstop with Sling Loop 0213 34 AI Dovetail 28 2970 As above but with loop for attaching 34 MIL-STD 1913 Rail 28 3436 a target type sling Aluminium transit cases 34 AI Dovetail 18 3027* Handstop with Bipod Mount 2510 Description Part No. 34 MIL-STD 1913 Rail 18 3435* As above but with a mounting point A lockable military *These mounts are for use on .338 lap mag calibre rifles only. for an AI bipod in addition to the case with custom interior sling loop All 34mm models can be converted to accommodate 30mm dia. sight tubes using reduction rings Green (all models) 4643 Black (all models) 4642 Target butt pad AI bipod Tactical suppressor Green (folded rifle) 4111 Description Part No. Description Part No. Description Part No. Black (folded rifle) 4255 Adjustable for height and 1044 Heavy duty bipod. 2485 Reduces muzzle flash, dust 1838 angle to enable a customised Legs only extend when the catch eruption and moderates sound Soft bags fit to the user’s shoulder is depressed to avoid accidental signature (Rifle must be fitted with noise. Quick fit/release spigot 1937 Threaded Muzzle Brake) Description Part No. mount allows rifle to loll and A top quality bag for stalking or Magazines traverse - ideal for use on uneven transit protection. Includes a Description Part No. ground and against moving targets. Maintenance kits removeable backpack harness and outside pockets for magazines, All steel bodies with rust resistant Weight 1.1lb (0.5kg) Description Part No. sights and other accessories finish. Springs and risers are Comprising: Cleaning Rod/ removeable for cleaning Rod Guide/Bronze Brush/Jag UK DPM (all models) 3923 Headspace gauges .308 (7.62) - 10 shot 0726 Universal Tool/Oil/Patches BLACK (all models) 3924 Description Part No. .300 winmag - 5 shot 0479 .243 win 3457 UK DPM (folded rifle) 4613 Headspace must be checked .308win/.300 winmag 0705 BLACK (folded rifle) 4614 .338 lapmag - 5 shot 2468 after a barrel change. .338 lapmag 1940 These gauges check that the chamber is within safety limits Mirage band .243 win/ GO gauge 0010 Description Part No. Barrel change kit .308 win NO GO gauge 0011 Reduces mirage produced 1415 Description Part No. .300 winmag GO gauge 3395 by hot barrel. (Only available for Allows replacement of 0903 NO GO gauge 3399 rifles with muzzle brakes) barrel with simple workshop tools .338 lapmag GO gauge 0050 NO GO gauge 0051 2 Bonded action 3 Full length 4 Folding chassis 5 Butt pad 6 Butt spike 7 MIL-STD 1913 rail 8 Trigger assembly 9 Safety mechanism 10 Stocksides 11 Adjustable 12 Bolt 13 Sling fixing points 14 Magazine 15 Weight 16 Maximum range aluminium chassis cheekpiece The high grade steel flat bottom This allows the stock to be folded Each rifle is fitted with a bolt on The threaded extendable spike This option is permanently bonded The rifle is fitted with a two-stage A three-position safety mechanism Designed to provide a secure grip The 0.75" (20mm) diameter cast 5 off sling attachment points are One detachable steel magazine is Optimised for comfortable carrying Actual maximum range depends on action is permanently bonded and The stiffness of the chassis means when travelling in vehicles or for pad together with a 0.4" (10mm) enables the user to observe the to the action providing a standard trigger, which allows a large sear is fitted to the rifle. The first (rear) and a repeatable shooting position The use of night vision equipment steel close fitting bolt combined standard. Two are mounted on each included. See the table below for whilst providing a stable shooting ammunition and environmental and bolted to the full-length aluminium that any available surface can be parachute insertions. The stock and a 0.8" (20mm) spacer. target area for an extended period interface for many optical systems. engagement to be maintained until position blocks the firing pin and in all conditions, the aluminium or telescopic sights with large with vents and a gas shroud side of the weapon, so the rifle can specifications. platform, approximate typical rifle operational conditions. Figures chassis. This rigid construction used to support the rifle with no locks in the folded position for Additionally the rifle is supplied with minimal fatigue. It is not the user takes up the first stage. locks the bolt in the closed chassis is encased in two polymer objective lenses may require the minimises blowback in the event of be carried flat against the back for weights with fixed stock, bipod and shown are solely to aid barrel coupled with a full width machined- effect on accuracy. Its construction security and the avoidance of with spare spacers of length 0.8" designed as a shooting rest and This reduces the chance of an position. The second (mid) position stocksides with an integral adjustment provided by the optional cartridge failure. The short throw security and comfort over rough empty magazine are shown in the selection. in recoil lug totally eliminates means that it is impervious to noise. It is released by pulling (20mm) and 1.6" (40mm). These should be lifted clear of the ground accidental discharge if the rifle is blocks the firing pin, but allows the cheekpiece. With sights at normal adjustable cheekpiece (60°) handle lies close to the terrain and long distances. table below. movement and ensures that zero weather. firmly on the butt. The wear can be fitted in any combination to prior to firing. This will avoid jolted when cocked. The trigger is bolt to be operated so a live round height, this provides a solid position stockside just above the trigger to A front attachment point is will be maintained in arduous compensated hinge ensures total customise the stock length. Two damage from recoil and is in adjustable for pull weights of may be removed from the chamber for the user’s cheek. Stocksides are minimise movement of the user’s situated below the fore end and conditions. An integral dovetail rail rigidity in the extended position. extra length screws are included to accordance with good shooting 3.3-4.4lb (1.5-2.0kg). The trigger with the weapon in a safe impervious to all normal cleaners hand. The bolt can be field can be used to anchor a target provides a stable base for the AI This option reduces overall length secure the thicker pads. Further practice. assembly can be easily removed for condition. The third (forward) and lubricants used in small arms stripped without tools for cleaning. style sling or be replaced by an one piece sight mount. by 8" (210mm) when folded and adjustment is possible with the cleaning by undoing the two socket position allows the weapon to be maintenance and are available in adapter for a Harris™ bipod. adds 0.4lb (0.2kg). target butt pad accessory. head cap screws. fired. The safety will only operate black or green. when the bolt is cocked. 1 Barrel 14 Magazine 15 16 Accuracy Calibre Length Twist Flutes Grooves Muzzlebrake Part No. Capacity Style Part No. Weight (see above) Overall length Range (see above) .243win 24" 1 in 10 No 4 No 1006 10 Dual row 0726 14.5lb (6.6kg) 44" (1120mm) 600yds (550m) All rifles are shot before despatch and must achieve .308win 20" 1 in 12 Yes 4 No 1479 10 Dual row 0726 13.5lb (6.1kg) 40" (1020mm) 600yds (550m) .308win 24" 1 in 12 No 4 No 0779 10 Dual row 0726 14.5lb (6.6kg) 44" (1120mm) 700yds (600m) 7 better than 1 m.o.a.

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    6 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us