RECLAIM Standardisation Toolkit STANDARDS MAKE IT CIRCULAR RECLAIM STANDARDIZATION TOOLKIT 14th October 2020 Maria Rossetti, Innovatin Dpt, UNI – Ente Italiano di Normazione Elena Mocchio, Innovation Dpt, UNI – Ente Italiano di Normazione João Reis, Faculdade de Engenharia da Universidade do Porto This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement N°869884 RECLAIM Standardisation Toolkit 2 Reviewers List V Date Beneficiary Author Update UPORTO, UNI, Maria Rossetti, Elena First draft 1.1 July 2020 SEZ Mocchio, Joao Reis 1.1 July 2020 All PPs All PPs Validation of mapped areas September 2020 UNI, UPORTO, Maria Rossetti, Maeva 1.3 Final reviews and publication October 2020 SEZ Pratlong, Joao Reis Disclaimer This document reflects only authors’ view; the Agency and the European Commission are not responsible for any use that may be made of the information it contains. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement N°869884 RECLAIM Standardisation Toolkit 3 SUMMARY FOREWORD 6 ACRONYMS AND DEFINITIONS 7 1. INTRODUCTION 10 2. RECLAIM PROJECT 10 3. STANDARDIZATION 12 3.1 WHAT IS STANDARDISATION 12 3.1.1 Standardisation system ............................................................................... 12 3.1.2 Standardisation documents .......................................................................... 14 3.2 STANDARDS AND INNOVATION 16 4. METHODOLOGY 18 5. STANDARDISATION TOOLKIT 21 5.1 SUMMARY 21 5.1.1 Main findings ....................................................................................... 21 5.2.1 Methodology ............................................................................................ 23 5.2 RECLAIM SERVICES 24 5.2.1 Data Analytics: standardisation initiatives and Technical commitees ....................... 24 5.2.2 Optimization: standardisation initiatives and Technical committee ......................... 68 5.2.3 Big Data analytics: standardisation initiatives and Technical committees .................. 79 5.2.4 Cost Modelling: standardisation initiatives and Technical committee ....................... 87 5.2.5 Life Cycle Assessment and Life Cycle Costs (LCA and LCC): standardisation initiatives and Technical committee ......................................................................................... 87 5.3 RECLAIM FRAMEWORKS 95 5.3.1 Digital Twin model: standardisation initiatives and Technical committees ................. 95 5.3.2 Circular Economy Strategies: standardisation initiatives and Technical committees .... 105 5.3.3 Decision Support Framework: standardisation initiatives and Technical committees .... 108 5.3.4 Cost Modelling and Financial Analysis toolkit: standardisation initiatives and Technical committees .................................................................................................... 115 5.3.5 Prognotisc and Health Management Toolkit (PHM) ............................................. 117 6. CONCLUSION 120 USEFUL LINKS 121 ANNEX1 RECLAIM STANDARDISATION TOOLKIT OVERVIEW: KEY AREA, KEYWWORDS, DESCRIPTORS AND STANDARDIZATION TECHNICAL COMMITTEES122 This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement N°869884 RECLAIM Standardisation Toolkit 4 Index of Figures Figure 1 RECLAIM Concept ................................................................................ 11 Figure 2 CEN and CENELEC member ................................................................ 13 Figure 3 Standardisation landscape ................................................................ 15 Figure 4 Standardisation process.................................................................... 16 Figure 5 The Integrated Approach: Standardization at the Service of Research and Innovation ............................................................................................................... 17 Figure 6 Overview of the Building Blocks for the RECLAIM architecture ....................... 18 Figure 7 RECLAIM Consolidated View based on the concept of Services and Frameworks ............................................................................................................... 19 Figure 8 RECLAIM Consolidated View based on the concept of Services and Frameworks and building block ......................................................................................... 21 Figure 9 Standards and Key Areas ................................................................... 22 Figure 10 Number of standards per ISO and CEN TC .................................................. 22 Figure 11 Number of developed and updated standards (EU and global) per year ............... 23 Figure 12 RECLAIM Standardisation toolkit methodology ............................................ 24 Index of Tables Table 1 DEGRADATION MODEL AND FAULT DIAGNOSTIC: list of relevant CEN and ISO Technical Committes (TCs) ........................................................................................... 24 Table 2 DEGRADATION MODEL AND FAULT DIAGNOSTIC: list of relevant standards ............. 26 Table 3 MACHINE PROFILING INDEX: list of relevant CEN and ISO Technical Committes (TCs) . 42 Table 4 MACHINE PROFILING INDEX: list of relevant standards ..................................... 45 5.2.2 Optimization: standardisation initiatives and Technical committee ........................ 68 Table 5 MAINTENANCE PLAN and PREDICTIVE MAINTENANCE: list of relevant CEN and ISO Technical Committes (TCs) ............................................................................... 68 Table 6 MAINTENANCE PLAN: list of relevant standards ............................................. 69 Table 7 PREDICTIVE MAINTENANCE: list of relevant standards...................................... 70 Table 8 PROCESS PLAN, MACHINE CALIBRATION: list of relevant CEN and ISO Technical Committes (TCs) ........................................................................................... 71 Table 9 PROCESS PLAN, MACHINE CALIBRATION: list of relevant standards....................... 73 5.2.3 Big Data analytics: standardisation initiatives and Technical committees ................. 79 Table 10 AUGMENTED REALITY: list of relevant CEN and ISO Technical Committes (TCs) ...... 79 Table 11 AUGMENTED REALITY: list of relevant standards .......................................... 80 Table 12 DASHBOARD ANALYTICS: list of relevant CEN and ISO Technical Committes (TCs) ... 84 Table 13 REFURBISHMENT AND REMANUFACTURING PLAN, PROCESS REFURBISHMENT: list of relevant CEN and ISO Technical Committes (TCs) .................................................... 84 Table 14 DASHBOARD ANALYTICS: list of relevant standards ........................................ 85 Table 15 REFURBISHMENT AND REMANUFACTURING PLAN, PROCESS REFURBISHMENT: list of relevant standards ......................................................................................... 86 Table 16 LCC and LCA: list of relevant CEN and ISO Technical Committes (TCs) ................ 87 Table 17 LCC and LCA: list of relevant standards ..................................................... 89 Table 18 DIGITAL TWIN : list of relevant CEN and ISO Technical Committes (TCs) .............. 95 Table 19 DIGITAL TWIN: list of relevant CEN and ISO Technical Committes (TCs) ............... 97 Table 20 CIRCULAR ECONOMY STRATEGY: list of relevant CEN and ISO Technical Committes (TCs) ....................................................................................................... 105 Table 21 CIRCULAR ECONOMY STRATEGY: list of relevant CEN and ISO Technical Committes (TCs) ....................................................................................................... 106 Table 22 DECISION SUPPORT FRAMEWORKS: list of relevant CEN and ISO Technical Committes (TCs) ....................................................................................................... 108 Table 23 DECISION SUPPORT FRAMEWORK: list of relevant standards ........................... 110 This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement N°869884 RECLAIM Standardisation Toolkit 5 Table 24 DECISION SUPPORT FRAMEWORKS: list of relevant CEN and ISO Technical Committes (TCs) ....................................................................................................... 115 Table 25 DECISION SUPPORT FRAMEWORKS: list of relevant standards .......................... 116 Table 26 PROGNOTISC AND HEALTH MANAGEMENT TOOLKIT (PHM): list of relevant CEN and ISO Technical Committes (TCs) ............................................................................. 117 Table 27 PROGNOTISC AND HEALTH MANAGEMENT TOOLKIT (PHM): list of relevant standards ............................................................................................................. 118 This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement N°869884 RECLAIM Standardisation Toolkit 6 FOREWORD The increasing spread of of sustainable development axioms in its social, environmental and economic values in coherence with the United Nations Bruntland Commission of 1987 criteria, has brought the Circular Economy back to the fore in recent years. The Circular Economy, as a set of conservative transformation processes of resources and better reuse of existing physical assets,