DPL Command Reference Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII. HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII. ©2010 - 2018 Honeywell International Inc. All rights reserved. Other product names or marks mentioned in this document may be trademarks or registered trademarks of other companies and are the property of their respective owners. Web Address: www.honeywellaidc.com Other product names or marks mentioned in this document may be trademarks or registered trademarks of other companies and are the property of their respective owners. Patents For patent information, please refer to www.hsmpats.com. TABLE OF CONTENTS Chapter 1 - Customer Support 1 Technical Assistance 1 Product Service and Repair 1 Limited Warranty 1 Send Feedback 1 Chapter 2 - DPL Commands Reference 3 Commands Listed by Name 4 Commands Listed by Syntax 18 Immediate Commands 32 System Level Commands 33 Label Format Commands 34 Label Formatting Commands 35 Format Record Commands 36 Bar Code Format Record Commands 37 Font Loading Commands 39 Extended System Level Commands 40 Configuration Commands 41 Chapter 3 - Commands 43 – |< | ) Make Last Field entered a Decrement Field 44 (s#W Character Download Data 46 )s###W Font Descriptor 47 ^ Set Count by Amount 48 *c###D Assign Font ID Number 49 *c###E Character Code 50 + | > | ( Make Last Field entered an Increment Field 51 A Set Format Attribute 53 A/a Code 3 of 9 Bar Code 54 AS Single Byte Symbol Set 55 B Bar Code Magnification 56 B/b UPC-A Bar Code 57 BP British Pound 58 C Set Column Offset Amount 59 C/c UPC-E Bar Code 60 CC Control Codes 61 CF Column Adjust Fine Tune 62 CH Comm Heat Commands 63 CL Continuous Label Length 64 CO Column Offset 65 DPL Command Reference iii CS Comm Speed Commands 66 CT Comm TOF Commands 67 D Set Dot Size Width and Height 68 D/d Interleaved 2 of 5 (I 2 of 5) Bar Code 69 DK Darkness 70 DM Default Module 71 DS Double Byte Symbol Set 72 E Terminate Label Formatting Mode and Print Label 73 E/e Code 128 Bar Code 74 ES ESC Sequences 76 F/f EAN-13 Bar Code 77 FA Format Attributes 78 FM Feedback Mode 79 G Place Data in Global Register 80 G/g EAN-8 Bar Code 81 H Enter Heat Setting 82 H/h Health Industry Bar Code (HIBC) 83 HE Heat 84 I/i Codabar Bar Code 85 IC Ignore Control Codes 86 IE Ignore Distances 87 IP Process SOH (Data) 88 J Justification 89 J/j Interleaved 2 of 5 (with a Modulo 10 Checksum) Bar Code 90 K Plessey 91 L/l Interleaved 2 of 5 (with a Modulo 10 Checksum and Bearer Bars) Bar Code 92 LM Label Store 93 LR Label Rotation 94 LW Label Width 95 M Select Mirror Mode 96 m Set Metric Mode 97 M/m 2-Digit UPC Addendum Bar Code 98 ML Maximum Length 99 MT Media Type 100 n Set Inch (Imperial) Mode 101 N/n 5-Digit UPC Addendum Bar Code 102 NS Disable Symbol Set Selection 103 O/o Code 93 Bar Code 104 P Set Print Speed 105 p Postnet Bar Code 106 PD Present Distance 107 PJ Present Adjust Fine Tune 108 PM Pause Mode 109 pS Print Speed 110 Q Set Quantity of Labels to Print 111 Q/q UCC/EAN Code 128 Bar Code 112 QQ Query Configuration 113 R Set Row Offset Amount 114 r Recall Stored Label Format 115 R/r UCC/EAN Code128 K-MART NON EDI Bar Code 116 RF Row Adjust Fine Tune 117 RO Row Offset 118 S Set Feed Speed 119 s Store Label Format in Module 120 iv DPL Command Reference S/s UCC/EAN Code 128 Random Weight Bar Code 121 SA SOP Adjust 122 SL Stop Location 123 SM Maximum Length Ignore 125 SOH # Reset 126 SOH * Reset 127 SOH A Send ASCII Status String 128 SOH a Send ASCII Extended Status String 129 SOH B Toggle Pause 131 SOH C Stop/Cancel 132 SOH E Send Batch Remaining Quantity 133 SOH e Send Batch Printed Quantity 134 SOH F Send Status Byte 135 ST Sensor Type 136 STX a Enable Feedback Characters 137 STX c Set Continuous Paper Length 138 STX E Set Quantity for Stored Label 139 STX e Select Edge Sensor 140 STX F Form Feed 141 STX G Print Last Label Format 142 STX I Input Image Data 143 STX i Scalable Font Downloading 144 STX J Set Pause for Each Label 145 STX k Test Communication Port 146 STX Kc Configuration Set 147 STX KC Get Configuration 160 STX KE Character Encoding 161 STX L Enter Label Formatting Command Mode 162 STX M Set Maximum Label Length 163 STX m Set Printer to Metric Mode 164 STX n Set Printer to Imperial Mode 165 STX p Controlled Pause 166 STX Q Clear All Modules 167 STX q Clear Module 168 STX r Select Reflective Sensor 169 STX S Recall Global Data and Place in Field 170 STX S Set Feed Speed 171 STX T Print Time and Date 172 STX T Print Quality Label 173 STX t Test DRAM Memory Module 174 STX U Label Format String Replacement Field 175 STX v Request Firmware Version 176 STX W Request Memory Module Information 177 STX w Test Flash Memory Module 179 STX X Set Default Module 180 STX x Delete File from Module 181 STX y Select Font Symbol Set 182 STX Z Print Configuration Label 183 STX z Pack Module 184 T Telepen 185 T Set Field Data Line Terminator 186 TP TOF Precedence 187 U Mark Previous Field as a String Replacement Field 188 u UPS MaxiCode, Modes 2 & 3 Bar Code 189 DPL Command Reference v U UPS MaxiCode, Modes 2 & 3 Bar Code with Byte Count Specifier 190 UM Unit of Measure 191 v FIM 192 W1c DataMatrix Bar Code 193 W1C DataMatrix Bar Code with Byte Count Specifier 197 W1d / W1D QR Code Bar Code 198 W1f / W1F Aztec Bar Code 204 W1I EAN128 Bar Code (with Auto Subset Switching) 210 W1J Code 128 Bar Code (with Auto Subset Switching) 212 W1k GS1 DataBar Bar Code 214 W1L Planet Code Bar Code 218 W1m / W1M Australia Post 4-State Bar Code 219 W1p Intelligent Mail Bar Code (IMB) 221 W1t TCIF Linked 3 of 9 (TLC39) 222 W1z MicroPDF417 Bar Code 224 W1Z Micro PDF417 Bar Code with Byte Count Specifier 228 X Terminate Label Formatting Mode 229 y Select Font Symbol Set 230 z Zero (Ø) Conversion to "0" 231 Z PDF-417 Bar Code with Byte Count Specifier 232 z PDF-417 Bar Code 233 Chapter 4 - Symbol Sets 235 Double Byte Sets 236 Single Byte Sets 237 Chapter 5 - Configuration 241 DPL Configuration Menu 242 System Settings 243 Default Module 244 Single Byte Symbol Set 245 Format Attributes 247 Label Rotation 248 Label Store 249 Units of Measure 250 Column Adjust 251 Row Offset 252 Pause Mode 253 Use British Lbs 254 Host Settings 255 Feedback Characters 256 Control Codes 257 Custom CNTBY Char 257 Custom CR Char 257 Custom SOH Char 258 Custom STX Char 258 Ignore Commands 259 Ignore Cntrl Code Data 259 Ignore Escape Sequences 259 Ignore Heat Cmd 259 Ignore SOH Data 260 Ignore Speed Cmd 260 vi DPL Command Reference Ignore Symbol Set Cmd 260 Ignore TOF Sensing Cmd 261 STX Kc Configuration Set 262 Chapter 6 - System Behavior 275 Configuration Persistence 276 Error Message Behavior 278 Font Downloading Behavior 279 Head Closure / Power Up Behavior 280 Internal Drive Mapping 281 Label Length Behavior 282 Large Bar Code Printing Behavior 283 Label Width Behavior 284 Pause / Cancel Label behavior 285 Printer Restart Behavior 286 Stop Location Behavior 287 Chapter 7 - Commands Not Supported 289 Immediate Commands Not Supported 290 Label Format Commands Not Supported 291 Label Formatting Commands 292 S Set Feed Speed 292 p Set Backfeed Speed 293 Bar Code Format Record Commands 294 K Plessey 294 W1t TCIF Linked 3 of 9 (TLC39) 295 T Telepen 296 v FIM 296 W1m / W1M Australia Post 4-State Bar Code 297 Format Record Commands 299 Scalable Fonts 299 Scalable Font K1: Gothic E Kanji (Downloaded / Embedded) 301 System Level Commands Not Supported 302 STX M Set Maximum Label Length 303 Extended System Commands Not Supported 304 Configuration Commands Not Supported 305 SA SOP Adjust 306 IE Ignore Distances 307 ML Maximum Length 308 PJ Present Adjust Fine Tune 309 Symbol Sets Not Supported 310 Old Commands Not Supported 311 System Commands Not Supported 312 Extended System Commands Not Supported 313 Configuration Set Commands Not Supported 314 Chapter 8 - Reference Information 315 Speed Ranges 316 Format Record Structure 318 Internal Bitmapped Font 320 DPL Command Reference vii Smooth/Downloaded Bitmapped Fonts 323 Scalable Fonts 324 Images 327 Lines and Boxes 328 Polygons 330 Circles 331 Bar Code Format Record Structure 333 Bar Code Summary Data 334 Bar Code Default Widths and Heights 337 viii DPL Command Reference CHAPTER CUSTOMER SUPPORT 1 Technical Assistance To search our knowledge base for a solution or to log in to the Technical Support portal and report a problem, go to www.hsmcontactsupport.com.