Magnetic Track Brakes – Light Rail Vehicles © Wiener Linien © Bombardier © Alstom © Stadler Magnetic track brakes apply brake force directly to the rail. Track brakes from Knorr-Bremse offer performance and reliability. Extensive in-service operation around the world is proof of the technological leadership of Knorr-Bremse. CUSTOMER BENEFITS APPLICATIONS n Independent braking system n Light rail vehicles n Braking force applied directly to the track n Metros n High braking performance even under n Urban solutions poor track conditions n Total deceleration can be increased safely n Shorter braking distance due to rapid response behaviour n Track cleaning effect: improvement for wheel-effective brake systems RIGID MAGNETS ARTICULATED MAGNETS Example of MTB designs applied to conventional Example of MTB designs applied to streetcars and metros 09.2018 streetcars and metros running up to high speeds P-1269-EN TECHNICAL DATA – MORE MAGNET TECHNICAL DATA – ARTICULATED MAGNET n Attractive force: 72 kN/m n Attractive force: 65 kN/m n Effective braking length: up to 1200 mm n Effective braking length: up to 1300 mm n Width / height of magnet: 115 mm / 106 mm n Width / height of magnet: 115 mm / 115 mm BENEFITS – MORE MAGNET BENEFITS – ARTICULATED MAGNET n Lower energy consumption (up to -15%) n Higher performance at high speeds (up to +30% compared to similar rigid magnet) n Lightweight design (up to -15%) n New compact design n Easier maintenance of pole shoes n Easier maintenance of friction elements n Customer friendly cable connection system n Customer friendly cable connection system FUNCTION Magnetic track brakes (MTB) are magnetically attract- RANGE OF USE ed to the rails. The brake force is built up by using The MTB is activated automatically in case of the friction between the magnetic track brake and emergency braking and should also be a the rail. Rapid braking, automatic braking and also ctivated under low adhesion conditions or on emergency braking are typical tasks for MTBs. steep descents. ELASTOMER SPRING SUSPENSION MAGNET MAGNET OFF ON n Improved kinematics and dynamics (damping function) n Reduces noise level significantly 1 dB(A) quieter than steel spring suspension n Fail-safe design Knorr-Bremse Systeme für Schienenfahrzeuge GmbH Moosacher Straße 80 80809 Munich Germany Phone: +49 89 3547-0 Fax: +49 89 3547-2767 WWW.KNORR-BREMSE.COM This publication may be subject to alteration without prior notice. A printed copy of this document may not be the latest revision. Please contact your local Knorr-Bremse representative or check our website www.knorr-bremse.com for the latest update. The figurative mark “K” and the trademarks KNORR and KNORR-BREMSE are registered in the name of Knorr-Bremse AG. Copyright 2018 © Knorr-Bremse AG. All rights reserved, including industrial property rights applications. Knorr-Bremse AG retains all power of disposal, such as for copying and transferring..