AV Cart Setup Hahnemann Library The components of the AV cart are as follows: Items (1) Monitor (1) VHS/DVD Player (1) Laserdisc Player (1) Power Strip Cables (1) Tri‐color RCA Audio/Video Cables (1) RCA Video Cable (1) S Video Cable Basic Setup Monitor DVD/VCR Player Laserdisc Player (Power strip not shown) Detailed Setup: Monitor RCA Audio Cables S Video Cable Audio (Video 1 Panel) Video (Video 1 Panel) Detailed Setup: DVD/VHS Player RCA Video Cable RCA Audio Cables S Video Cable Video (Line In) Audio (Line Out) Video (Line Out) Detailed Setup: Laserdisc Player RCA Video cable Video (Video Out) Detailed Setup (Verbal Instructions) Monitor 1. Insert red and white RCA audio cables in to Audio jacks on the Video 1 panel. 2.Insert S video cable into the Video jack on the Video 1 panel. DVD/VHS Player 3.Insert the opposite end of the red and white RCA audio cables into the Audio jacks of Line Out. 4.Insert the opposite end of the S video cable into the Video jack of Line Out. 5.Insert the yellow RCA video cable into the Video jack of Line In. Laserdisc Player 6.Insert the opposite end of the yellow RCA video cable into the Video Out jack. Detailed Setup: Configuration 1.Ensure that Monitor and DVD/VHS player are turned on. These two devices must always be turned on when in use. 2.If using the Laserdisc player, ensure that it is turned on. 3.If using the DVD player, ensure that the DVD/VHS player is set to use the DVD half. 4.If using the VHS player, ensure that the DVD/VHS player is set to use the VHS half. 5.If using the Laserdisc player, ensure that the VHS half of the DVD/VHS player is enabled for use, and that it is turned to the channel “L1” (channel selector on VHS half). .