SAE 2012 World Congress & Exhibition Technical Session Schedule As of 04/30/2012 07:40 pm Tuesday, April 24 Heir Apparent or a Bunch of Hot Air? What Technologies Have the Best Potential for Weaning America off of Foreign Sources of Petroleum? Session Code: ANN200 Room FEV Powertrain Innovation Forum Session Time: 10:00 a.m. A variety of technologies have been proposed (CNG, E85, hybrids, EVs, biodiesel, etc.) for the U.S. to ¿gain oil independence.¿ Issues continue to be raised on the subsidy vs. sustainability of potential petroleum replacements. This panel will discuss if any of them have become truly viable and whether or not our foreign dependency will ever change. Moderators - Floyd E. Allen, Powertrain Systems Executive, Fev, Inc. Panelists - Coleman Jones, Biofuel Implementation Manager, General Motors Company; Thomas McCarthy, Chief Engineer, Engine Research & Advanced, Ford Motor Company; Rolf Stromberger, Vice President Business Environment & Public Affairs Strategy, BMW of North America, LLC; Justin Ward, Advanced Powertrain Program Manager, Toyota Motor Engineering & Manufacturing North America; Tuesday, April 24 Connecting 27.5, 35.5, and 54.5: What are the Implications of Finding a Roadmap that Meets the New CAFE Limits? Session Code: ANN201 Room FEV Powertrain Innovation Forum Session Time: 1:00 p.m. CAFE targets are driving the design and development of new powertrain and vehicles, 35.5 mpg in 2016 going to 54.5 mpg in 2025. This panel will discuss what combination of technologies can achieve these limits and the implications that consumers and OEMs may be facing. Moderators - Gary Rogers, President & CEO, FEV, Inc. Panelists - Richard L. Gezelle, National Manager, Technical & Regulatory Affairs, Toyota Motor North America, Inc.; Scott Miller, President & COO, Vision Critical International; James Tamm, Fuel Economy Division Chief, Office of Rulemaking, NHTSA; Timothy White, Head of Powertrain Development, Chrysler Group LLC; Tuesday, April 24 Grand Opening and Keynote Address Session Code: ANN106 Room AVL Technology Leadership Center Session Time: 8:30 a.m. Keynote Speaker Jeffrey Immelt, GE Keynote Speakers - Jeffrey Immelt, Chairman & CEO, GE Global Research Center Tuesday, April 24 Energy Smart: Connected Vehicles and New Opportunities Session Code: ANN100 Room AVL Technology Leadership Center Session Time: 10:00 a.m. New opportunities will be created as the current electrical grid is transformed into the smart grid. The new value of vehicle to grid connection, as well as new values beyond mobility, may change the direction of society as a whole. This panel will discuss the value of connected vehicles as well as the opportunities beyond mobility and how they may both transform daily life in the future. Moderators - Glen Stancil, Vice President, NRG Energy EV Services Panelists - Michael Bly, Executive Director, Group Global Functional Leader, Global Electrical Systems, Infotainment & Electrification, General Motors Company; Bert Haskell, Technology Director, Pecan Street Inc.; Mark Little, Senior Vice President & Director, GE Global Research Center; Minoru Shinohara, Senior Vice President, Nissan Motor Co., Ltd.; Akihiko Tobe, General Manager, Hitachi, Ltd., Social Innovation Business Project Division; Tuesday, April 24 Mobility Smart Efficient and Convenient City Transportation by Connected Services and Information Session Code: ANN101 Room AVL Technology Leadership Center Session Time: 1:30 p.m. Urban transportation is evolving and preparing for a new mobility era based on connections with information and services. This panel will investigate the prospects for increased convenience and efficiency through the integration of cross-industry technology roadmaps and discuss what the auto industry can learn from how other sectors plan for the future. Moderators - Sandy Stojkovski, President, Scenaria, Inc., A Member of the AVL Group Panelists - Takao Asami, Corporate Vice President, Nissan Motor Co., Ltd.; Christopher Eric Borroni-Bird, Director, Advanced Technololgy Vehicle Concepts & EN-V Program, General Motors Company; Andreas Mai, Director, North America, Automotive Practice, Cisco Internet Business Solutions Group; Lynn Peterson, Sustainabile Communities & Transportation Policy Advisory for Gov. Kitzhaber, State of Oregon; Kristin Schondorf, Research & Advanced Engineering Project Manager, Future of Mobility, Ford Motor Company; Tuesday, April 24 In-Vehicle Software Session Code: AE306 Room D0-02A Session Time: 10:00 a.m. This session concentrates on the development of embedded software that resides in production vehicle electronic modules. With a focus on current technical, business, and legal issues relevant to the auto industry, this session covers all aspects of embedded software development including requirements, implementation, algorithms, modeling, and autocode generation. Expert speakers from the embedded software community are encouraged to share their experiences and opinions. Organizers - Robert Miller, Vector CANtech Inc.; Hassan Hor, Chrysler Time Paper No. Title 10:00 a.m. 2012-01-0013 Advanced Firmware Device Manager for Automotive: A Case Study Joao H. Silva, Visteon Corp. 10:20 a.m. 2012-01-0015 Open Source Platforms Challenge Traditional Proprietary IVI Systems Paul Haskitt, Roger Hampel, Symphony Teleca Corp. 10:40 a.m. 2012-01-0014 AUTOSAR Gets on the Road - More and More Juergen Cordes, Markus Zetlmeisl, Robert Bosch GmbH The papers in this session are available in SAE Technical Paper Collection, COLL-TP-00244, and also individually. To purchase visit collections.sae.org Planned by Electrical and Electronic Systems Committee / Automobile Electronics Activity Tuesday, April 24 AUTOSAR ¿ Changing how we design and implement Automotive Embedded Networks and Electronic Control Modules: An Expert Panel Discussion Session Code: AE501 Room D0-02A Session Time: 1:00 p.m. This panel will address the current status of AUTOSAR adoption by the vehicle OEMs, Tier 1 module developers and AUTOSAR products and service providers. How soon and how big will the AUTOSAR impact be for you and the ways vehicles are designed and built? Organizers - Robert Miller, Vector CANtech Inc. Moderators - Robert Miller, Vector CANtech Inc. Panelists - Ralf Fritz, Vector CANtech Inc.; Michael Joseph Melaragni, General Motors LLC; Jochen Schoof, Elektrobit Automotive GmbH; Jeremy James Warmbier, Nexteer Automotive; Thomas Erkkinen, MathWorks Inc; Tuesday, April 24 Testing and Instrumentation Session Code: AE106 Room D0-03A Session Time: 10:00 a.m. This session deals with Innovative Engine Test methods along with their test facility development, Vehicle Infotainment systems, Real time customer usage data and correlation/simulation with in-lab drivability methods, Reliability Testing Approach. Organizers - Prasad Srinivasa, DG Technologies; Anand Vijay Kulkarni, Chirag Sonchal, Tata Motors Ltd Chairpersons - Ketan R. Kulkarni, Tata Consultancy Services; Prasad Srinivasa, DG Technologies Time Paper No. Title 10:00 a.m. ORAL ONLY Pressure Imaging for Automotive Applications Timothy Gorjanc, XSENSOR Technology Corp. 10:20 a.m. 2012-01-0021 Development of New Test Method for Compression Load and Permanent Deformation of Weather Strip Joonchul Park, Hyundai Motor Co. & KIA Motors Corp. 10:40 a.m. 2012-01-0022 Software for Testing Alternators of Heavy-Duty Trucks and Cars Eduard Lyubimov, Perm State Technical University; Sergey P. Gladyshev, Michigan-Dearborn University; Dmitriy Istselemov, Nikolay Belyaev, Perm State Technical University 11:00 a.m. 2012-01-0023 Accurate Estimation of Time Histories for Improved Durability Prediction Using Artificial Neural Networks Sivakumar Balakrishnan, Anoop PP, Ravindra V Kharul, Sasun C, M/S TVS Motor Company Limited Planned by Testing and Instrumentation Committee / Automobile Electronics Activity Tuesday, April 24 In-Vehicle Networks Session Code: AE305 Room D0-03A Session Time: 1:00 p.m. Technical papers and/or presentations offered in this session will portray the latest developments and proposals for In-Vehicle Networks. Typical subjects covered are: new protocols, gateways, vehicle control, message handling, X-by-wire, diagnostics, off-board connectivity and vehicle-to- vehicle or vehicle-to-infrastructure communications. Organizers - Christopher Lupini, Delphi Corp.; Richard D. Means, Mark Zachos, DG Technologies Chairpersons - Christopher Lupini, Delphi Corp. Time Paper No. Title 1:00 p.m. 2012-01-0194 Design Methods to Optimize the Performance of Controller Area Networks (Written Only -- No Oral Presentation) Dibyendu Palai, Tata Motors Ltd. 1:20 p.m. 2012-01-0193 Guaranteeing Hard Real-Time Requirements of In-Vehicle Multi-hop Communication Over Ethernet Meng Liu, Lars Brohne, Jonas Lext, Time Critical Networks 1:40 p.m. 2012-01-0195 Internet Protocol over Ethernet in Powertrain - Comparison with Current Applications and Future Trends Stefan Schneider, Liem Dang, Eckart Schlottmann, Siegbert Baque, Joern Franke, Robert Bosch GmbH 2:00 p.m. 2012-01-0196 Exploring Use of Ethernet for In-Vehicle Control Applications: AFDX, TTEthernet, EtherCAT, and AVB Rodney Cummings, National Instruments; Kai Richter, Symtavision Gmbh; Rolf Ernst, Jonas Diemer, TU Braunschweig; Arkadeb Ghosal, National Instruments 2:40 p.m. ORAL ONLY Partial Networking for CAN bus systems: Any saved gram CO2/km is essential to meet future regulations and energy efficient designs are imperative for electric mobility. David Bollati, Cornelius Butzkamm, C&S Group GmbH 3:00 p.m. ORAL ONLY Comparison of Radical