High Speed Jig Grinding Air Turbine Spindle Ultra-high-Speed & Super-Precision PLANET About PLANET Features ● A milling machine turns into a jig grinder by simply attaching a boring head available on the market and PLANET. ● If PLANET is mounted on a bench lathe, this grinder can be used as a precision internal grinder. ● PLANET can be used as a principal axis of an internal surface grinding device. You can easily mount PLANET on a machine, so there is no need to buy a expensive high spec machine. If you use PLANET only when you need it, you can avoid idle time of a machine, and use a machine effectively and efficiently. Rotation speed is 65,000min-1, spindle run out is within 1μm. Planet realize hign-precision jig grinding and mold machining. Milling machine + PLANET = Jig Grinder Low price = No need to buy a expensive jig boring machine Rotation speed is 65,000min-1, spindle run out is within 1μm. Using your machine effectively and efficiently = Avoiding idle time of a machine Connection drawing In case mounted on a lathe PLANET 600 Air line kit PLANET 600 AL-M1202 Compressor PLANET �NAKANISHI Accessories AL-M1202 (For蛉mm) 4502- AL-M1202 Air line kit 一 ら 300 260 ON ／ ONN OLL 6-07 oei Filter Mesh 0.3µm 一 Connection Hose (K-260) : 2m / Lubricating Oil (K-211) : 1 pc. / Reducer 一―91592 一CHK-2.35 ¢2.35 91530 CHK-3.0 ¢3.0 I.D 91593 CHK-3.175 (/)3.175 91540 CHK-4.0 (/)4.0 蒻i 91560 CHK-6 0 (/)60 91596 CHK-6 35 (/)635 Model: CHK-1.0、 ー CHK-3.0、CHK-3.0AA、 (/)05、(/)0.6、(/)0.7、(/)0.8、I/JO9 CHK-3.175、CHK-3.175AA、 ¢1.0、¢1.5、¢2.0、¢2.5、¢3.5、¢4.5、¢4.76、¢5.5 CHK-4.0、CHK-4.0AA、 CHK-6.0、CHK-6.0AA、 ¢1.1、¢1.2、01.3、¢1.4、¢1.7、¢1.8、¢1.9 CHK-6.35、CHK-6.35AA CHK-□□ (/)2.1、(/)2.2、(/)2.3、(/)2.4、(/)2.6、(/)27、(/)2.8、(/)29 ¢31、¢32、¢33、¢3.4、¢3.6、¢3.7、¢38、¢3.9 I.D ¢4.1、(/)4.2、(/)4.3、¢4.4、(/)4.6、(/)4.7、(/)4.8、(/)4.9 口 (/)5.1、(/)5.2、cp53、(/)54、<P56、(/)5.7、cp58、cp59 穏i 言= ¢16、(/)50 91597 CHK-3.0AA ¢3.0AA※ Model : Except above 91598 CHK-3.175AA ¢3.175AA※ 91599 CHK-4.0AA ¢40AA※ 91600 CHK-6.0AA ¢6.0AA※ Collet CHK group 91601 CHK-6.35AA ¢6.35AA※ ※High precision type AA (Spindle runout within 2µ m) Description 一12譴 ― 一| | 2129 K-265 Collet nut for Collet CHK | Description | 一― 一K-211 Lubricating Oil (70cc) 1057 1058 K-202 Lubricating Oil (1L) PR-K331E Ver.1 '15.10.03. I Specifications and design are subject to change without notice. notice. without change to subject are design and Specifications www.nakanishi-inc.com FAX +81-3-5828-0064 FAX FAX 0289-62-1135 Factory ・ Tokyo Office Tokyo 9F TIXTOWER UENO, 4-8-1, Higashiueno Taito-ku Tokyo 110-0015 Headquarters 322-8666 Tochigi-Ken Shimohinata, Kanuma-Shi, 700 0289-64-3280 TEL NAKANISHI INC. TEL +81-3-5828-7740.