Flle No. S360-00 Form A22-6822-12 Systems Reference Library IBM System/36D Bibliography All available reference literature applicable to the installation and 6peration of any mM System/360, except the Model 20, is in this :;fjibliography. Part 1 is a publications selector, arranged by model and machine number. Part 2 provides abstracts of all publications .. in form-number sequence. Publications relating to the Model 20 are in the IBM Sy~em/ 360 Model 20 Bibliography, Form A26-3565. Another publication of interest to the user of System/360 is the IBM Teleprocessing Bibliography, Form A24-3089. Additional copies of most publications with form numbers can be ordered through local mM representatives. Special ordering procedures are given in the abstracts. Systems Reference Library For each major mM data processing system, a Systems A complete list of publications appears as an accumu­ Reference Library (SRL) contains all basic reference lative index in subject-code sequence in the System/ literature needed to plan, program, install, and operate 360 SRL Newsletter, Form N20-0360. the system. An SRL Bibliography Supplement, Form A24-3089, covers publications for mM teleprocessing Technical NewsleHers and data collection equipment. The Bibliography of Data Processing Techniques, Form F20-8172, lists se­ To keep publications current, additions and other lected mM technique-oriented publications that are modifications are distributed as Technical Newsletters applicable to many types of systems. ( TNLS ). The TNL masthead carries the file number and form number of the publication to which it applies. Also, all previously issued TNLS are listed so that you Bibliography may verify receipt of all changes. The bibliography is always associated with the Sys­ tem/360 SRL Newsletter, Form N20-0360. When you order the bibliography, you automatically receive the SRL NewsleHer SRL Newsletter. The bibliography prOvides a publica­ The System/360 SRL Newsletter, Form N20-0360, is tion selector to aid in quickly finding publications re­ issued every four weeks (if changes have occurred lated to a specific model or device, and contains the during that period) to update the System/360 Bibliog­ abstracts (in form number sequence) for all current raphy. All current publications are listed in subject System/360 SRL publications except those pertaining code sequence. Each entry shows the form number to the Model 20. and title of the publication as well as the form num­ By reviewing the contents of this bibliography, you bers of applicable TNLS. Obsolete publications are listed may select items of interest for your installation and separately, with replacement form numbers (if any) be aware of other materials that may be useful in the indicated. Abstracts of new publications are also future. included. The SRL Newsletter gives the form number suffix so File Numbers, Subied Codes that you may verify your publications as current. The cover page of each SRL manual shows the title, Some publications have more than one current edi­ abstract, form number, and file number. 'The file num­ tion, since a reprint that incorporates previously dis­ ber identifies the system or component discussed and tributed replacement pages is given a new suffix. All the general subject area. current editions and applicable TNLS are listed in the For publications associated with one or two Li­ SRL Newsletter. braries, the prefix of the file number is the system type (e.g., 1401/1460-, 7080-). Whtm the publication is in­ SRL Subscription Service cluded in more than two Libraries, the component A direct-mail service is available to mM system users type (e.g., 1311-, 7330-) is used, if applicable. In other to supply new publications, major revisions, and Tech­ cases "GENL" (general) is used. nical Newsletters for a library that is formed and The suffix of the file number is the subject code maintained according to a profile of the user's inter­ which designates a general subject area and the sug­ ests. To subscribe, see your local mM representative. gested filing sequence. Code 15, for example, is used for all publications related to physical planning specifi­ cations; code 33 appears on all publications related to IBM Programming Systems mM sort and merge programs for the system. Applica­ SRL Newsletters also show the current status of pro­ tion program documentation appears under -subject gramming systems available for a system. Additional code 60. data, including ordering instructions, for these and In the bibliography, the subject code for ~lDY pub­ application programs are in the Catalog of Programs lication appears to the upper right of its abstract. for IBM System/360, Form C20-1619. Thirteenth Edition (December, 1968) This. is a major revision of, and obsoletes, A22-6822-11 and all associated sRI. Newsletters. The entire section headed "Library Subject Code Listing" has been removed; however, the contents of that section Continue to appear in the current issue of the System/360 SRL Newsletter, Form N20-0360. Always use the bibliography with the current SRL Newsletter. Requests for copies of mM publications should be made to your mM representative or to the'mM branch office serving your locality. This manual has been prepared by the mM Systems Development Division, Product Publications, Dept. B98, PO Box 390, Poughkeepsie, N.Y. 12602. Send comments concerning the contents of this publication to the above address. Part l-Publications Selector The publications selector is an aid for quickly finding IBM System/360 Tape Operating System Program­ publications about a specific model or specific I/O ming Index, Form C24-5064 control unit· or device of the SysteD1/360, except for IBM System/360 Disk Operating System Program­ publications about the Model 20. It is arranged ac­ ming Index, Form C24-5063 cording to the numbers of the models and the I/O units. To determine the models of the System/360 to IBM System/360 Operating System Master Index, Form C28-6644 which an I/O unit currently may attach, refer to the IBM System/360 Input/Output Configurator, Form IBM System/360 Model 44 Programming System­ A22-6823. Concepts and Facilities, Form C28-6810 Aids for finding specific Programming Systems pub­ IBM System/360 Time Sharing System Concepts lications are given in the: and Facilities, Form C28-2003 IBM System/360 Basic Programming Support Pro­ gramming Index, Form C24-5067 Refer to the IBM System/360 Model 20 Bibliogra­ IBM System/360 Basic Operating System Program­ phy, Form A26-3565, for information regarding the ming Index, Form C24-5041 Model 20. Publication Form Number for Systeml360 Publication Description Model 25 Model 30 Model 40 Model 44 Model 50 Model 65 Model 67 Model 75 Model 85 Model 91 System Summary A22-6810 (for all models) System Reference A22-6821 (for all models) System Physical C22-6820 (for all models) Planning Reference Model Reference A24-351 0 A24-3231 A22-6881 A22-6875 A22-6898 A22-6884 A27-2719 A22-6889 A22-6916 A22-6907 (CPU) A24-3411 (Channel) Model Configurator A24-3511 A24-3232 A22-6813 A22-6874 A22-6814 A22-6887 A27-2713 A22-6888 A22-6920 (In A22-6907) Model Operating A24-3373 A22-6911 A22-6910 A22-6908 A27-2728 A22-6909 Procedures Model Physical X22-6894 X22-6894 X22-6856 Planning Template X22-6894 X22-6914 X22-6914 X22-6905 X22-6856 X22-6923 X22-6924 I/O Reference See separate I/O chart. I/O Configurator A22-6823 (for all models) OEMI: Channel- to-Control Unit A22-6843 (for all models) Interface OEMI: Power Control Interface A22-6906 (for all models except 91) OEMI: Direct A22-6845 (for all models except 44) Control Feature Channel-to-Channel A22-6892 (for all models) Adapter Feature Other Features A24-3512 A24-3255 L22-6902 A22-6900 A27-2717 A27-2715 A24-3524 A24-3365 L22-6903 A27-2716 A24-3526 C20-1650 L22-6904 A27-2717 IBM System/360 Bibliography 3 I Pubjication Form Nllmber I Publication Form Number Physical Physical I/O DeviCe or Reference OEMI Planning I/O Device or Reference OEMI Planning Control Unit Manual Manual Templata Control Unit Manual Manual Template 50 Magnetic Data A27·2725 2302 Disk Storage A26-5988 X22-6858 IlIICI'iber Model 1 Models3,4 (C20-1649) 1017 Paper Tape Reader A33-4500 X22-6834 2303 Drum Storage A26-5988 A26-5663 X22-6858 Models1,2 Modal 1 (C20-1649) 1018 Paper Tape Punch A33-4500 X22-6834 2311 Disk Storage A26-5988 A26-3561 X22-6858 Modal 1 Drive (C20-1649) Modal 1 1061 Control Unit X22-6894 Models1,N1 X24-3381 2314 Direct Access A26-3599 X22-6858 Storage Facility (C20-1649) 1062 Printer-Keyboard Model 1 Modals3,5,8 2321 Data Cell Drive A26-5988 1062 Print.. -KeybOard A22-6877 A26-3574 X22-6858 Modal 1 (A26-3633) Model 7 1c20-1649) 1063 Printer X22-6894 2401 Magnetic Tape Models1,4 A22-6866 A22-6862 X22-6855 Unit Modals 1-6 1231 Optical Mark A21-9031 X22-6880 2415 Magnetic Tape Page Reader (A21-90121 A22-6866 X22-6855 Unit and Control Model N1 Models 1-6 1259 Magnetic A24-3500 X22-61160 2420 Magnetic Tape Unit A22-6818 a..c:tarRI8dar X22-6855 Model 7 Model 2 2495 Tape Cartridge 1286 Optical R!IIIdar A24-3256 X22-6860 A27-2726 X22-6855 Model 1 RI8darModel1 2501 Card Reader 1287 Optical RI8dar A21-9064 X22-6880 A21-9026 X22-6834 Models 1-4 ModelsB1,B2 2520 Card Read Punch 1288 Optical Page A21-9OB1 X22-6880 A21-9027 X22-6834 Reader Model 1 ModalB1 2520 Card Punch 1403 Printer A24-3073 A24-1431 X22-6834 A21-9021 X22-6834 Models 2,3,7, N1 (A24-3488) ModeisB2,B3 2540 Cerd Read Punch 1404 Printer A24-1446 A24-3356 X22-6834 A21-9033 X22-6834 Model 2 Model 1 1412 Magnetic A24-1421 X22-6860 2560 Multifunction A26-5893 X22-6894 CIwactar RI8dar Card Machine Modal 1 ModeIA1 141BOptai A24-1413 X22-6880' 2671 Paper Tape Reader A24-33B8 X22-6834 CIwac:ter RI8dar (A24-1462) Model 1 Models 1,2 (A24-301111 2701 Data Adapter Unit A22-6864 A22-6844 X22-6857 1418 Optical A24-1473 X22-6860 Model 1 CIIInct.