A Lorentz Invariance Respectful Paradigm to Explain the Origin of Ultra-High-Energy Cosmic Ray Energies Daniel Korenblum

A Lorentz Invariance Respectful Paradigm to Explain the Origin of Ultra-High-Energy Cosmic Ray Energies Daniel Korenblum

A Lorentz invariance respectful paradigm to explain the origin of ultra-high-energy cosmic ray energies Daniel Korenblum To cite this version: Daniel Korenblum. A Lorentz invariance respectful paradigm to explain the origin of ultra-high-energy cosmic ray energies. 2017. hal-01500130 HAL Id: hal-01500130 https://hal.archives-ouvertes.fr/hal-01500130 Preprint submitted on 2 Apr 2017 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. A Lorentz invariance respectful paradigm to explain the origin of ultra-high-energy cosmic ray energies Daniel KORENBLUM [email protected] March 1, 2017 Abstract The issue of this article, whose approach consists in rigorously applying the princi- ple of least action and the invariance of Minkowski space-time, is to explore and extend the equations of special relativity when velocities are greater than c while preserving their covariant nature. This approach, adapted to the study of special relativity, pro- vides a privileged theoretical framework for probing the properties of the superluminal regime if it exists. Relativistic superluminal equations indicate that the speed of light is a singularity in the speeds' spectrum and that the evolution of these equations as a function of the velocity is reversed with respect to the equations of special relativity. This extension of special relativity makes it possible to formulate a credible hypothesis on the origin of ultra-high-energy cosmic ray energies. keywords: Special relativity, Principle of least action, Ultra-high-energy cosmic ray (UHECR), GZK limit, Cosmic inflation 1 Introduction Special relativity, the formal theory elaborated by Albert Einstein in 1905, is the theo- retical consequence of Galilean relativity and the principle that the velocity of light in a vacuum has the same value in all Galilean reference frames (or inertial frame of reference) implicitly stated in Maxwell's equations. The two postulates of special relativity are the following: • the laws of physics have the same form in all Galilean reference frames, • the speed of light in a vacuum has the same value in all Galilean reference frames, which amounts to saying that space-time is homogeneous and isotropic. In special relativity, the Lorentz transformations correspond to the law of changing Galilean referential in which the equations of physics must be preserved as well as the speed of light which is constant in any Galilean referential, while preserving the orientation of space and time. Maxwell's equations of classical electromagnetism are covariant within the group of Lorentz transformations, i.e. they keep the same mathematical form before and after application of a group operation. Lorentz transformations are linear transformations of the coordinates of a point in Minkowski's four-dimensional and relativistic space-time. The Metric of Minkowski ds2 = c2dt2 − dx2 − dy2 − dz2 is an invariant quantity of Lorentz [1]. All the equations of special relativity can be found by applying the principle of least action where the invariance by change of Galilean referential imposes S = −mc R ds cor- 2p 2 v responding to the Lagrangian L = −mc (1 − β ) with β = c [1]. In relativistic physics, and in the absence of an electromagnetic field, it is well known that the principle of least action consists in minimizing the function −mcτ, where τ is the proper time along the 1 path, which is both the time flowing in the frame of reference of the body of mass m along the path and the length of the trajectory measured by the metric of the space: which amounts to maximizing the proper time [2]. The principle of least action is used in this paper to extend the theory of special relativity and to derive the laws of mechanics when the velocity is greater than c. The calculations developed in this paper are based on the invariance ds2 and the maximization of the proper time. 2 Presentation of the theoretical model 2.1 Model assumptions There are two relativistic regimes : • subluminal regime (v < c) whose mechanical equations are those of special relativity, • superluminal regime (v > c) whose equations the present study proposes to deter- mine. Like the special relativity, the superluminal regime is governed by the following principles: • the speed of light in a vacuum is the same for all observers, regardless of the motion of the light source, • the principle of least action consists in maximizing the proper time, • ds2 = dx2 + dy2 + dz2 − c2dt2 is an always positive relativistic invariant. 2.2 Calculation steps From the invariance ds2 we will determine the law of change of a galilean referential i.e. the equivalent of the Lorentz transformations in superluminal regime, then we will deduce the equation of the superluminal doppler effect by applying the invariance of the wave phase. We will establish the definition of proper time and deduce the Lagrangian by applying the principle of least action. The last step of the calculation will determine the impulse and the energy of a massive body in superluminal regime. 3 Lorentz transformation in superluminal regime We consider a reference frame R0 animated by a uniform velocity v with respect to the reference frame R. The R0 axis coincides with the Ox axis of R and the velocity direction v, the other two axes remaining parallel at all time. The origin of the times t = 0 is taken at the instant when the points O and O0 coincide1. The conservation of intervals states: c2t2 − x2 = c2t02 − x02: (1) Consequently x and ct can be considered as functions of x0 and ct0, i.e. of the form: x = ax0 + bct0 (2) ct = dx0 + ect0; where a; b; d; e 2 R 1Notations in prime will refer to the R0 reference frame and simple notation to the R reference frame 2 Figure 1: The two frames of reference R et R0 Using the expression of the equality of the intervals (1) and identifying term for term, we find that: 8 2 2 < a − d = 1 e2 − b2 = 1 (3) : de = ab: If we consider a quantity θ such that a = cosh(θ), we can deduce from the equations above that: 8 a = cosh(θ) > <> b = sinh(θ) (4) e = a > : d = b: The equations (2) can be written in the same way as special relativity: x = x0 cosh(θ) + ct0 sinh(θ) (5) ct = x0 sinh(θ) + ct0 cosh(θ); we put: ct c tanh(θ(v)) = = ; (6) x v where v is the velocity of the reference frame R0 with respect to R by introducing the 2 c superluminal rapidity θ(v) = arctanh( v ): 8 v β > cosh(θ) = c = > q 2 p 2 > v − 1 β − 1 <> c2 (7) > 1 1 > sinh(θ) = = : > q 2 p :> v β2 − 1 c2 − 1 2As with special relativity, the superluminal rapidity enables us to express Lorentz transformations as a hyperbolic rotation in Minkowski space-time. Due to its linear character, it preserves the classical mechanics' relation between speed and acceleration. This point will be analyzed in detail in chapter 4. 3 The expression of the superluminal Lorentz transformation is: 8 0 c2 0 x = γ>(x + v t ) > 0 > t = γ ( x + t0) <> > v y = y0 (8) 0 > z = z > β :> γ> = p : β2−1 In relativistic superluminal regime, we find that the Lorentz factor becomes p β . In β2−1 the remainder of the document we will note the Lorentz factor in the superluminal regime β 1 γ> = p and the Lorentz factor in subluminal regime γ< = p . β2−1 1−β2 The superluminal Lorentz factor indicates that: lim γ> = 1 et lim γ> = 1: (9) v!+1 v!+c The transformation (8) is noted L(>;x)(v) and is seen to be easily reversed, and we have: 2 8 x0 = γ (x − c t) > > v > 0 x > t = γ>(t − ) <> v y0 = y (10) 0 > z = z > β > γ> = p : : β2−1 −1 Thus we have L(>;x)(v) = L(>;x)(−v). Furthermore, the composition of two trans- formations is another transformation. This set of transformations forms a group with ~ L(>;x)(1) as a neutral element. A four-vector position E of an event E is defined in a reference frame R by its four coordinates (ct; x; y; z), all homogeneous to lengths. A change of reference frame is associated to a matrix of change of base: ~0 ¯ ~ E = L(>;x)(v)E: (11) 4 Matrix representation The linearity of these relations allows space-time matrix writing. The 4 × 4 matrix change of base is: 0 c2 1 γ − γ 0 0 B > v > C B γ> C L¯ (v) = B − γ> 0 0 C : (12) (>;x) B v C B C @ 0 0 1 0 A 0 0 0 1 It is possible to simplify the writing of the coefficients of the matrix by in fact using 2 β 2 γ> the superluminal rapidity θ (6) : γ> = allows us to write γ> − = 1. pβ2 − 1 β2 By using the change of variable with hyperbolic functions: γ c cosh(θ) = γ and sinh(θ) = > with θ = arctanh( ); (13) > β v 0 cosh(θ) −c sinh(θ) 0 0 1 B sinh(θ) C ¯ B − cosh(θ) 0 0 C L(>;x)(θ) = B c C ; (14) @ 0 0 1 0 A 0 0 0 1 4 It can be noted that with this setting: ¯ ¯ 0 ¯ 0 L(>;x)(θ) ◦ L(>;x)(θ ) = L(>;x)(θ + θ ): (15) The set of superluminal Lorentz transformations L(>;x)(v), parametrized by the rela- tive speed v, forms a group3.

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    19 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us