EMC SYMMETRIX VMAXe STORAGE SYSTEM EMC® Symmetrix® VMAXe™ with the Enginuity™ operating environment delivers a multi- controller, scale-out architecture with consolidation and efficiency for the enterprise. As the newest member of the Symmetrix series, VMAXe utilizes the same revolutionary EMC Virtual Matrix Architecture™ as EMC VMAX™ systems. SPECIFICATIONS ARCHITECTURE The Virtual Matrix Architecture enables IT departments to build storage systems that tran- scend the physical constraint of competing array architectures. The architecture allows scal- ing of system resources through common and fully redundant building blocks called VMAXe series engines. A single VMAXe engine provides the complete foundation for a high-availability storage array. Each VMAXe engine contains two Symmetrix VMAXe directors and redundant interfaces to the EMC Virtual Matrix™ interconnect. Each Symmetrix VMAXe director consolidates front-end, global memory, and back-end functions, enabling direct memory access to data for opti- mized I/O operations. Up to four VMAXe engines can be interconnected via a set of multiple active fabrics that provide scalable performance and high availability. VMAXe engines can be added non-disruptively to provide linear scale-out of Symmetrix system resources. A single-engine Symmetrix VMAXe can start with as little as 24 drives, scaling up to four engines supporting 1,080 drives for a maximum usable capacity of up to 1.5 petabytes. VMAXe engine one and VMAXe engine two can support up to 240 drives per engine. VMAXe engines three and four can support up to 300 drives per engine. A fully configured 1,080- drive system is comprised of four integrated system bays and three storage bays. Each inte- grated system bay (engine) houses 150 drives, storage bay one and bay two house 180 drives and storage bay three houses 120 drives. A four-engine array provides up to 512 GB (128 GB per engine) of cache memory and up to 64 Fibre Channel ports or 32 1/10 Gb/s iSCSI or 10 Gb/s FCoE ports. VMAXe MAXIMUM SPECIFICATIONS • Up to four VMAXe engines • Up to 512 GB cache/128 GB per engine • Up to eight quad-core 2.4 GHz Intel® XEON processors/two per engine • Up to 1,080 drives VMAXe INTERCONNECT Industry-standard RapidIO® fabric—Virtual Matrix Architecture is extensible to other stan- dard interconnects. SPECIFICATION SHEET CONNECTIVITY Symmetrix VMAXe systems are available in configurations supporting up to four VMAXe engines with a maximum of 64 front-end ports. Optimized hardware logic and data protec- tion encoding ensures end-to-end data integrity with automated channel failover for maxi- mum availability and load balancing. Symmetrix VMAXe systems support all popular hardware and operating system platforms, storage area networks (SANs), and high-availabil- ity cluster environments. IPv6 support is available with 10 Gb/s Ethernet. PROTOCOL USABLE SYSTEM PORTS 2 Gb/s Fibre Channel Host/SAN Ports 8–16 ports per VMAXe engine; 8–64 per array 4 Gb/s Fibre Channel Host/SAN Ports 8–16 ports per VMAXe engine; 8–64 per array 8 Gb/s Fibre Channel Host/SAN Ports 8–16 ports per VMAXe engine; 8–64 per array 1 Gb/s iSCSI Host Ports 4–8 ports per VMAXe engine; 4–32 per array 10 Gb/s iSCSI Host Ports 4–8 ports per VMAXe engine; 4–32 per array 10 Gb/s FCoE Host Ports 4–8 ports per VMAXe engine; 4–32 per array 8 Gb/s Fibre Channel Remote 2–4 ports per VMAXe engine; 2–8 per array Replication Ports 10 Gb/s GbE Remote Replication Ports 2–4 ports per VMAXe engine; 2–8 per array 1 Gb/s GbE Remote Replication Ports 2–4 ports per VMAXe engine; 2–8 per array * The total number of Remote Replication ports available per VMAXe array is eight. Mixed combinations of the above port types depend upon the configuration. Refer to the EMC Support Matrix at www.EMC.com, or contact your local EMC sales representative for spe- cific configuration support. DISK DRIVE AND ENTERPRISE FLASH DRIVE CONNECTIVITY The Symmetrix VMAXe drive infrastructure is architected with the latest 4 Gb/s dual-ported Fibre Channel drives, Enterprise Flash drives, SAS, and SATA drives, each supported by two independent I/O channels with automatic failover and fault isolation. AVAILABLE DISK DRIVES CAPACITY 450 GB 600 GB 2 TB 300 GB SAS 600 GB SAS Rotational Speed (rpm) 15,000 10,000 7,200 10,000 10,000 Interface 4 Gb/s FC 4 Gb/s FC 4 Gb/s SATA 4Gb/s FC 4Gb/s FC Internal Data Rate (Mb/s) 1,051-2,225 1,010-1,840 470-1,070 1219-2029 1219-2029 Average Seek Time (read/write) 3.4/3.9 ms 3.8/4.4 ms 8.2/9.2 ms 3.7/4.2 ms 3.7/4.2 ms Raw Capacity 439.0 GB 585.4 GB 2000.3 GB 288.19 GB 576.39 GB Open Systems Capacity 432.3 GB 576.3 GB 1882.7 GB 268.4 GB 536.80 GB Configurations with mixed-drive capacities and speeds are allowed depending upon the con- figuration. 64 GB of total capacity will be reserved for internal Symmetrix file system use. All capacities are based on 1 GB = 1,000,000,000 bytes. Actual usable capacity may vary depending upon configuration. AVAILABLE ENTERPRISE FLASH DRIVES CAPACITY 100 GB 200 GB Interface 4 Gb/s FC 4 Gb/s FC Internal Data Rate (Mb/s) 800-1,600 800-1,600 Raw Capacity 100 GB 200.0 GB Open Systems Capacity 91.72 GB 196.9 GB MAXIUMUM SYSTEM CAPACITIES IN TB MAXIMUM Number of drives (2 TB ) Up to 1,080 drives Mirrored: Open Systems 1,000 TB RAID-5, 3+1 Capacity Open Systems 1,490 TB RAID-5, 7+1 Capacity Open Systems 1,490 TB RAID-6, 6+2 Capacity Open Systems 1,490 TB RAID-6, 14+2 Capacity Open Systems 1,490 TB Configurations with mixed drive capacities and speeds are allowed depending upon the con- figuration. 64 GB of total capacity will be reserved for internal Symmetrix file system use. All capacities are based on 1 GB=1,000,000,000 bytes. Actual usable capacity may vary depending upon configuration. PHYSICAL AND COOLING SPECIFICATIONS Height * Width Depth Front & Rear Weight Power Heat Dissipation (in/cm) (in/cm) (in/cm) Service Area (lb/kg) (kVA) (kBTU/hr) (Max) Storage Bay 75/190.5 24.02/61 41.88/106.4 42.0/106.7 1160/526 3.9 12.3 System Bay 75/190.5 24.02/61 41.88/106.4 42.0/106.7 1550/703 4.0 12.8 All dimensions are cabinet/enclosure size without shipping brackets or securing brackets. Weight, power, and cooling are maximum for a full configuration. Cooling is front to rear for system bays and storage bays. *An additional 18 inches (45.7 cm) is recommended for ceiling/top clearance. Consult EMC Power Calculator at http://PowerCalculator.emc.com for specific configuration information. POWER SPECIFICATIONS—STORAGE BAY AND SYSTEM BAY Specifications North American 3 Wire International and Australian connection (2 L & 1 G)a 3 Wire connection (1 L & 1 N & 1 G)a Input Nominal Voltage 200-240 VAC +/- 10% L-L nom 200-240 VAC +/- 10% L-L nom Frequency 50-60Hz 50-60Hz Circuit Breakers 30 A 32 A Power Zones Two Two Customer Site (Minimum) Two 30 A, single-phase drops Two 32 A, single-phase drops per bay per bay a. L = line or phase, N = neutral, G = ground. The table above describes electrical specifications for systems installed in North American, International, and Australian sites. Data centers with systems must conform to the corre- sponding specification. ENVIRONMENTAL SPECIFICATIONS (OPERATING) Temperature Extreme (°F/°C) 50–90/10–32 Altitude (ft/m), max. 7,500/2,286 Humidity (%), Non-condensing 20%–80% Raised Floor Recommended Contact US To learn more about how EMC products, services, and solutions can help solve your business and IT challenges, contact yout local representative or authorized reseller, or visit us at www.EMC.com. EMC2, EMC, Enginuity, Symmetrix, Virtual Matrix Architecture, VMAX, VMAXe, and the EMC logo are registered trademarks or trademarks of EMC Corporation in the United States and other countries. VMware and the VMware logo are registered trademarks or trademarks of VMware, Inc. in the U.S. and/or other jurisdictions. All other trademarks used herein are the property of their respective owners. © Copyright 2011 EMC Corporation. All rights reserved. Published in the USA. 09/11 Specification Sheet H8716.2 EMC Corporation Hopkinton, Massachusetts 01748-9103 1-508-435-1000 In North America 1-866-464-7381 www.EMC.com.