
FOREST PRODUCTS LABORATORY (Madison, Wis, 53705) FOREST SERVICE, U.S. DEPARTMENT OF AGRICULTURE Approved Technical Article Keywords Recycling Abstract Corrugating medium Physical properties This study investigated the effects of repeated recycling on the strength and perfor- Mechanical properties mance of paperboard and corrugated fiberboard containers. In general, the strength Runnability and performance were lowered when 100% recycled fiber was used. The greatest Drainages loss in strength occured between the virgin material and the first recycle, rather than Construction between subsequent recycles. Repeated recycling caused poorer drainage on the Compression strength foudrinier paper machine and lowered runnability of the corrugating medium. Score- Impact strength line cracking was more function of material moisture content than of recycling. Burst strength Linerboards Repeated recycling of corrugated containers and its effect on strength properties J. W. Koning, Jr., and W. D. Godshall One method of extending the United properties of containers made from re- containers was evaluated by tests simu- States' timber supply is to reuse the peatedly recycled fiber? Although there lating actual service conditions. After fiber from such products as used corru- are many articles on the use of recycled the containers were evaluated, the cor- gated fiberboard containers. This prac- fibers, only a few (1-4) deal with recy- rugated board was recycled. One-third tice is increasing because of the high cling unbleached kraft fiber. McKee (3) was made into a 42-lb linerboard with- quality of the fiber and its availability reported the effect of repeated recy- out refining so the drainage on the in concentrated areas such as shopping cling. but his work was limited to hand- paper machine would be as good as pos- centers, supermarkets, and industrial sheets and did not include the effects of sible; one-third was made into 26-lb plants. The amount will also increase as conversion of the paperboard and cor- corrugating medium; and the last third more balers and compactors are in- rugated or the subsequent performance made into a 42-lb linerboard with refin- stalled at places of such concentration of the container. ing to achieve a burst value of approxi- and as new concepts, such as truck- Thus, this study determined (a) the mately 100. Components were com- mounted balers for use in collecting effect of repeated recycling of uncon- bined (Fig. 1) and again converted into segregated, used corrugated containera taminated fibers on the compressive containere for evaluation. After evalua- from dispersed locations, are perfected. strength, scoring, and impact resistance tion. the corrugated board made with The recovery of used corrugated con- of corrugated fiberboard containers. the linerboard from unrefined fiber was tainers also reduces the problem of solid and (b) the effect on those same proper- divided – one half recycled into liner- waste disposal for municipalities. Thus ties of repeated recycling with refining board and the other half into corrugat- the recycling of used corrugated con- to a burst level of approximately 100 for ing medium. The same procedure was tainers into new corrugated fiberboard each facing (to meet the carrier require- followed with the corrugated hoard containers is expected to increase. ments of a buret level of 200 for the made with the linerboard from refined But what happens to the strength combined board.) fiber. After evaluation of containers The approach was to use virgin made from these components, the pro- southern pine unbleached kraft pulp for cess was repeated for a total of four the linerboard and mixed hardwood complete cycles. neutral sulfite semichemical (NSSC) J. W Koning, Jr., Research Forest Products Tech­ pulp for the corrugating medium. These nologist and W D. Godshall, Research General En­ RESULTS AND DISCUSSION gineer. US Department of Agriculture, Forest Ser­ components were combined into corru- vice, Forest Products Laboratory, P. O. Box 5130, gated fiberboard, and then the com-. Madison Wis. 53705 The Laboratory is maintained bined board was converted into con- The study encompassed the produc- in cooperation with the University of Wisconsin. tainers. Performance of the corrugated tion process from raw pulp to finished 146 Vol. 58, No. 9 September 1975 / Tappi machine-direction tensile strength, and stretch, regardless of whether the mate- rial was unrefined or refined when com- pared to the virgin material. Each time the pulp wan recycled, a sample of the stock was recovered for drainage evaluation. The drainage time of t he virgin fiber average 12 sec using a 42-lb/1000 ft2 weight handsheet made in a standard TAPPI sheet mold. Drainage time of unrefined recycled material was 17 sec after the first cycle, 25 sec after the second, and 30 sec after the third, for an increase of over 100% in drainage time. For the refined recy- cled fiber, the increase in drainage time was even more dramatic, going to 26, 29, and then on the third cycle to 65 sec, in- dicating a more than five-fold increase in drainage time. The drainage on the paper machine followed the trend of sheet-mold drain- age. A considerable reduction in ma- chine speed was necessary to make a 42-lb linerhoard with the recycled re- fined fiber. The results indicate that one of the most serious problems with using recycled fibers in the reduction in drainage on the paper machine wire and the corresponding decrease in produc- tion rate. Corrugating medium. Between the virgin fiber and the first recycle, strength properties of the corrugating medium generally improved. With re- peated recycling, burst strength was re- Fig.1. Sequence of recycling starting with virgin fiber in control material. duced on each succeeding cycle, but all the recycled corrugating medium burst values were higher than the virgin NSSC. During the corrugating process, the container, under controlled laboratory in the paperboard manufacturing pro- recycled corrugating medium tended to conditions. Predictive and production cesses. Therefore, it is desirable that an fracture, and corrugating speed and web quality control testa were performed on evaluation of the effects of recycling tension had to be reduced to complete the component materials, and tests con- utilize the fourdrinier papermaking the runs. Thus, the use of recycled fiber sidered indicative of in-service perfor- process. results in conversion problems at the mance were run on the completed con- It would be highly desirable to corre- corrugator, as well as manufacturing tainers. late container performance tests and problems on the paper machine. This was a limit condition study in predictive material component testa for that it was designed to study containers production quality control. Though a made with 100% virgin fiber and 100% full analysis of correlation is beyond the Combined Corrugated Fiberboard recycled fiber, rather than blending var- scope of this report, a limited analysis Properties ious percentages of recycled fiber with of the data indicates that no one test virgin fiber, as is typically done in in- adequately characterizes container per- Burst. The effect of recycling on the dustry. What is presented here is an es- formance; a number of separate tests burst characteristics of the combined timate of the maximum effect on are required to determine different per- board made from the unrefined fiber strength properties that can be attrib- formance qualities. For example, some was greater than in the case of the re- uted to the repeated recycling of fiber. of the better correlations were machine- fined fiber (Table II) Between the vir- Other factors such as contaminants, direction tensile or burst strength with gin material and unrefined corrugated, production processes, or severe contam- impact resistance of containers, and burst strength was reduced 35% on the inant removal processes (5) may result ring crush or edgewise compression with first cycle, 44% on the second cycle, and in additional degradation. container compressive strength. 37% on the third cycle. The refined ma- Paperboards in this study were made terial showed reductions of 19, 18, and on a 13-in.-wide experimental fourdri- 18%. These results indicate that the loss nier paper machine. Recycled fiber has Component Properties in burst strength can be reduced with been successfully used for many years refining, hut the refined material drains as the principal furnish for paperboard The properties of nominal 42-lb lin. more slowly on the wire Repeated recy- made on cylinder machines; however, erboard and 26-lb medium from the cling had less effect than the initial cylinder linerhoard differs in physical various cycles are listed in Table 1. recycle of the virgin fiber. properties from fourdrinier linerhoard, Linerboard. Results indicate a re- Edgewise compressive strength. In so any effects of recycling would likely duction in linerboard burst and tear edgewise compressive strength, a most he masked by the inherent differences strength, folding endurance, ring crush, important property of the combined Tappi / September 1975 Vol. 58, No. 9 147 hoard, the unrefined material lost 15% on the first and second cycles and 17% on the third cycle. The refined material dropped 7, 11, and 1%. Thus it appears that repeated recycling may not be sig- nificantly detrimental to edgewise com- pressive strength if sufficient refining is employed. Flat crush. Flat crush resistance was lowered by 10, 7, and 14% for the three recycles of the unrefined material. For the refined material, losses were 15, 29, and 12%. Scoring. Tests of horizontal scores (perpendirular to flutes) made with a three-point roller score indicated no visible cracking. This was true regard- less of material, number of recycles, at- mospheric condition in which scoring took place (30, 50, or 90% RH), or whether the material was refined or un- refined. Tests of vertical scores (parallel to the flutes) indicated that atmospheric conditions and refining affected scoring. Scores made at 80°F, 90% RH condi- tions showed no visible cracking.
Details
-
File Typepdf
-
Upload Time-
-
Content LanguagesEnglish
-
Upload UserAnonymous/Not logged-in
-
File Pages5 Page
-
File Size-