Cheery Cherry Toy Chest A challenging classic that will last a lifetime We call this a toy chest—but it’s a book case, a knickknack box and a fun place to sit and read. And when your kids are grown, it makes one heck of a fne entry bench. Tis is one of the more challenging projects in the book. It involves biscuit joints, sunken panels and cutting tight curves. Plus, it’s made from cherry— a mistake in this material costs three times as much as a mistake in pine! So, if you’re a beginner, consider sharpening your chops on a couple of other projects before digging into this one. We show two versions of the fnished chest. One with cherry plywood panels; another with panels 18 | building unique and useful kids’ furniture 36" 1/4" 2 1/2" M 15" P R 11 1/4" 1 1/2" Q 15" 36" Top Side 1 1/4" 33" 1 1/2" 36" 9" E 1/4" 36" 1/4" 2 1/2" M F 2 1/2" M 1 1/2" D X 4 3/4" M 3/4" 15" H 15" 5 1/2" 3 1/2" 11 1/4" P R P 11 1/4" B 2 1/2" 24 1/2" R 11 1/4" 1 1/2" 24 1/2" Q 1 1/2" Q Seat T C 18 1/2" 12" U 9" U 16" W 10 1/8" V J K S 9" Front 15" 36" A 3 1/2" D 3 1/2" 15" 36" 1 1/4" 33" G 1 1/2" 1 1/4" 9" 33" E 1 1/2" 4" 9" O 1 1/2" E 1 1/2" 1" 1 1/2" 3/4" N L 3/4" 36" 33" F 1 1/2" F 37 1/2" 1 1/2" D X 4 3/4" D X 4 3/4" M 3/4" H 3/4" M 5 1/2" 36" H 3 1/2" 5 1/2" 3 1/2" 1/4" 11 1/4" B 2 1/2" 24 1/2" 11 1/4" B 2 1/2" 24 1/2" 24 1/2" 24 1/2" Seat 2 1/2" M T C 18 1/2" Seat 12" T C 18 1/2" 12" U 9" U 16" W 10 1/8" V J U 9" U 16" W 10 1/8" K V J S 9" K 15" S 9" P R 11 1/4" 1 1/2" Q A 3 1/2" D 3 1/2" A 3 1/2" D 3 1/2" G G 4" O 1 1/2" 1 1/2" 1" 4" 1 1/2" 3/4" O 1 1/2" 1 1/2" 1" 1 1/2" 3/4" N L 3/4" 36" 33" N L 3/4" 36" 33" 37 1/2" 37 1/2" 15" 36" 1 1/4" 33" Back 1 1/2" 9" E Materials List Material Qty F ¾" x ¾" x 8' cherry 1 1 1/2" D X 4 3/4" 1 x 2 x 8' cherry 3 M 3/4" H 1 x 3 x 8' cherry 1 5 1/2" 3 1/2" 1 x 4 x 8' cherry 1 11 1/4" B 2 1/2" 24 1/2" 24 1/2" 1 x 6 x 4' cherry 1 Seat T C 18 1/2" 12" ¼" x ¾" x 8' cherry 1 U 9" U 16" W 10 1/8" V J ¼" x 4' x 8' cherry plywood 1 K S 9" ¾" x 4' x 8' cherry plywood 1 1 ½" hinges 3 A 3 1/2" D 3 1/2" Soft close hinge 1 G 4" O 1 1/2" 1 1/2" 1" 1 1/2" 3/4" N L 3/4" 36" 33" 37 1/2" building unique and useful kids’ furniture | 19 painted by children’s book author, Nancy Begin by using a miter saw to cut parts A Carlson (fnd out more at nancycarlson.com). through K to length. Make the curved cuts We encourage you to have fun decorating on the bottoms of parts A and G, as well as your fat panels in your own unique way. the rounded armrests on part H. Build the four frames (Photo 1) using glue, biscuits and How to Build It clamps (for additional information on biscuit Te main chest consists of four frames. Building joiner basics, see “Riley’s Rocking Chair” and them takes a fair amount of work, skill and visit YouTube.) Use a router with a ⅜" rabbeting focus, but once they’re constructed you’re over bit (Photo 2) to cut the ¼" deep rabbets on halfway home. All the parts are made from the insides of the frame openings (except for standard width lumber, so you won’t have the middle opening of the front panel.) Tese any ripping to do. We used cherry, but any recesses hold the fat panels installed in Photo 8. softwood or hardwood will work just as well. Next mark the locations of the biscuits used to join the frames to one another. Use Cutting List clamps to temporarily hold the parts in position Part Dimension Qty (Photo 3) and mark the centers of the biscuits. A) Front bottom rail ¾" x 3 ½" x 36" 1 Note the front and back panels are inset ¼" in B) Front top rail ¾" x 2 ½" x 36" 1 from the ends of the side panels; use a scrap C) Front stile ¾" x 1 ½" x 9" 4 piece of ¼" plywood to establish that inset. D) Back bottom & mid rail ¾" x 3 ½" x 33" 2 Cut the slots as shown in Photo 4. Adjust the E) Back top rail ¾" x 1 ½" x 33" 1 biscuit joiner fence to cut the center of the F) Back side stile ¾" x 1 ½" x 24 ½" 2 slot ⅜ inch back from the “inset” line. Test ft G) Side bottom rail ¾" x 3 ½" x 12" 2 your frames as shown in Photo 5. If everything H) Side top rail ¾" x 5 ½" x 12" 2 aligns, apply glue to the biscuits, slots and I) Note: To avoid confusion, no “I”s included in parts lists edges of the frame and clamp them together. J) Side front stile ¾" x 1 ½" x 16" 2 Glue and screw the lid support K) Side back stile ¾" x 1 ½" x 18½" 2 (M) to the back of the chest (Photo L) Chest bottom ¼" x 13" x 36" plywood 1 6.) Install the bottom supports (N,O), then M) Top lid support ¾" x 2 ½" x 36" 1 use glue and brads to secure the bottom N) Long bottom support ¾" x ¾" x 36" 2 (L) in place as shown in Photo 7. O) Short bottom support ¾" x ¾" x 11 ½" 2 Cut the fat panels (U, V, W, X) to size, P) Lid center core ¾" x 8 ¼" x 32 7⁄8" plywood 1 then round the corners as seen in Photo 8. Q) Lid long frame member ¾" x 1 ½" x 35 7⁄8" * 2 Use glue and ½" brads to secure the panels R) Lid short frame member ¾" x 1 ½" x 11 ¼" * 2 into the openings. Install the vertical S) Inner divider verticals ¾" x 13" x 11 ½" plywood ** 2 dividers (S), divider top (T) and trim T) Inner divider top ¾" x 13" x 8½" plywood 1 pieces as seen in Photo 9. (Note, the fat U) Front panel ¼" x 9 ¾" x 11 5⁄8" plywood 2 panels have been removed for clarity.) Build the lid (Photo 10.) Use biscuits V) Side panel ¼" x 10 ¼" x 12 5⁄8" plywood 2 to secure the perimeter pieces (Q, R) to W) Back panel ¼" x 10 5⁄8" x 33 5⁄8" plywood 1 the plywood core (P) and to one another X) Back rest panel ¼" x 5 ½" x 33 5⁄8" plywood 1 *Indicates long point to long point at the corners. Install the hinges and lid **Cut to ft support (Photo 11.) Apply your fnish of choice then step back and admire your work—and the joy this toy chest brings. 20 | building unique and useful kids’ furniture Front frame Side frames 3⁄8" wide ¼" deep Rabbeting bit Back frame BUILD the front, back and side frames using ROUT ¼" deep recesses in the backs of the 1 glue and biscuits for joinery. These four frames 2 frames to receive the fat panels, using a router create the main structure of the chest. and a 3⁄8" rabbeting bit. ¼" setback ¼" spacer 3⁄8" ¼" backset MARK the locations of the centers of the CUT slots in the side pieces for joining the front 3 biscuits on the panels. The ¼" plywood in 4 and back panels. Again account for the ¼" the foreground is used to establish the side panel setback when cutting your slots. setback shown. Lid support (M) TEST FIT the panels, then secure them to one GLUE and clamp the lid support (M) to the back 5 another using biscuits and glue. Use lots of 6 panel. Secure the ends to the side panels with clamps; you shouldn’t have to use nails or screws. 6d fnish nails. building unique and useful kids’ furniture | 21 Rounded corner TEST FIT the 8 inset panels. Fine tune the size Bottom support (N) as needed, then secure them into the INSTALL the bottom, securing it to the ¾" x ¾" opening with glue 7 bottom supports with glue and ½" brads. and ½" brads. Trim battens (P) (Q) Divider panel (S) (R) INSTALL the partitions that create the sides of BUILD the lid.