Date of issue: 30.06.2021 Version: 2021_v2 Prepared by: Gál Marietta Polyethylene TIPELIN 7100S The joint product portfolio of MOL Petrochemicals and Slovnaft provides infinite opportunities GENERAL PROPERTIES Characteristics: High density bimodal polyethylene copolymer granulate intended for sheet extrusion application Used monomer: ethylene (CAS No.: 74-85-1) Used Co-monomer: 1-Butene (CAS No.: 106-98-9) Applied Catalyst system: non-phthalate Ziegler-Natta License: Mitsui Manufacturer: MOL Petrochemicals Co. Ltd./ TISZAÚJVÁROS Shelf life: The guarantee period is 6 months and starts to lapse on the day of delivery of goods to Buyer. FOOD CONTACT APPLICATION EUROPEAN UNION FOOD CONTACT STATUS This product complies with the relevant requirements of: Commission Regulation (EC) No 1935/2004. The organoleptic characteristics of food contact materials are influenced by converting conditions, time and temperature of storage and type of food, therefore compliance with article 3 §1,c must be verified and tested by the producer of the final packaging material. Commission Regulation (EC) No 2023/2006 (of 22 December 2006) on good manufacturing practice for materials and articles intended to come into contact with food as amended, applicable to intermediate materials (e.g. plastic granules, plastic flakes). We declare that production of this product runs under established, implemented and observed effective and documented quality assurance system certified by ISO 9001, ISO 14001 and OHSAS 18001 so that, under normal or foreseeable conditions of use, its constituents cannot transfer to food in quantities which could endanger human health or bring about an unacceptable change in the composition of the food or bring about deterioration in the organoleptic properties. We fulfil the general rules on GMP as laid down in the above-mentioned commission regulation (EC) No. 2023/2006 on good manufacturing practice for materials and articles intended to come into contact with food. Moreover, we declare that our production process is in harmony with requirements of Directive 1999/92/EC (of 16 December 1999) on minimum requirements for improving the safety and health protection of workers potentially at risk from explosive atmosphere. Date of issue: 30.06.2021 Version: 2021_v2 Prepared by: Gál Marietta Polyethylene TIPELIN 7100S The joint product portfolio of MOL Petrochemicals and Slovnaft provides infinite opportunities 2 Commission Regulation (EU) No. 10/2011 (14 January 2011) on plastic materials and articles intended to come into contact with food and its amendments such as 1282/2011/EC (28 November 2015), 1416/2016/EC (24 August 2016), 2017/752 EC ( 28 April 2017), 2018/79 (18 January 2018), 2018/213/EC ( 12 February 2018), 2018/831/EC ( 5 June 2018) and 2019/37 (10 January 2019). (applies to all EU-Member States). The monomers and additives used in our production are listed in the Union List of Authorized substances of Regulation 10/2011/EC ANNEX I. Based on migration experiments with test samples made of this polymer and carried out in the presence of the standard food simulants A, B, D1 and D2 at 40°C during 10 days, it is our experience that under these conditions overall migration limits are not exceed 10 mg/dm2. Furthermore we declare that this product does not release substances in detectable quantity listed in 10/2011/EC ANNEX II. We draw your attention to the fact that the EU-Directive 10/2011/EC, which applies to all EU-Member States, includes a limit of 10 mg/dm2 on the overall migration (OML) from finished food contact material or article. In accordance with EU-Directive 10/2011/EC the OLM and specific migration limits (SMLs, if applicable) should be measured on finished articles placed into contact with the foodstuff or appropriate food simulants for a period and at the temperature which are chosen by reference to the contact conditions in actual use according to the rules laid down in EU-Directives 97/48/EC (amending 82/711/EEC) and 85/572/EEC. Specific Migration Limit (SML) requirements according to Commission Regulation (EU) 10/2011 This product does not contain monomers, additives or components which have SMLs or QMAs as specified by Regulation 10/2011/EC, ANNEX I. Dual Use Additives The information provided concerning additives which are also food additives and flavoring is based on our current knowledge. Ca-stearate (CAS No.:1592-23-0, Ref. No.: 89040 Ca-salts) as E 470a used max. 1500 ppm. Please note it is responsibility of both, the manufacturers of finishing contact articles as well as the industrial food packers, to make sure that these articles in their actual use are in compliance with the imposed overall migration requirements. Date of issue: 30.06.2021 Version: 2021_v2 Prepared by: Gál Marietta Polyethylene TIPELIN 7100S The joint product portfolio of MOL Petrochemicals and Slovnaft provides infinite opportunities 3 Regulation (EU) No 1169/2011 of the European Parliament and of the Council (25 October 2011) (on the provision of food information to consumers, amending Regulations (EC) No 1924/2006 and (EC) No 1925/2006 of the European Parliament and of the Council We certify, that during manufacturing of this product, we do not use or intentionally incorporate into this product, any of the substances listed in this regulation. Therefore it is not reasonable to expect any of such substances to be present in this product. Food allergens: peanuts, tree nuts (almonds, brazil nuts, chestnuts, filberts, hazelnuts, hickory nuts, macadamia nuts, pecans, pine nuts, pistachios, walnuts) milk and products thereof (including lactose) eggs soybeans shellfish crustaceans (shrimps, crabs, scallops, crayfishes, lobsters, oysters) molluscs (snails, squids, octopi, clams) and mollusc products sulphites food colourants celery and celery products wheat (gluten) and wheat products seeds (cotton, poppy, sesame, sunflower, mustard) and seed products aspartame monosodium glutamate (MSG) caffeine hydrogenated vegetable protein (HVP) grains (barley, oats, rye) lupine and lupine products However, this product has not been tested for presence of above mentioned substances. Directive 2007/68/EC ( 27 November 2007) amending Annex IIIa to Directive 2000/13/EC regarding certain food ingredients (Allergens) We certify, that during manufacturing of this product, we do not use or intentionally incorporate into this product, any of the substances which are listed in ANNEX IIIa of this directive. Therefore it is not reasonable to expect any of such substances to be present in this product. However, this product has not been tested for these chemical substances. Note: 2000/13/EC, 2003/89/EC, 2006/142/EC has been amended by 2007/68/EC. Date of issue: 30.06.2021 Version: 2021_v2 Prepared by: Gál Marietta Polyethylene TIPELIN 7100S The joint product portfolio of MOL Petrochemicals and Slovnaft provides infinite opportunities 4 Regulation (EC) No 1895/2005 (of 18 November 2005) on the restriction of use of certain epoxy derivatives in materials and articles intended to come into contact with food - 2,2-bis(4-hydroxyphenyl)propane bis(2,3-epoxypropyl) ether, referred to as ‘BADGE’ [CAS No 001675-54-3] - bis(hydroxyphenyl)methane bis(2,3-epoxypropyl)ethers, referred to as ‘BFDGE’ [CAS No 039817-09-9] - other novolac glycidyl ethers, referred to as ‘NOGE’ are not used in manufacturing of this product, therefore it is not reasonable to expect any of such substances to be present in this product. However, this product has not been tested for presence of these chemical substances. MOH, MOSH, MOAH, POH, POSH, POAH, POMH statement according to Commission Recommendation (EU) No 2017/84 (of 16 January 2017) on the monitoring of mineral oil hydrocarbons in food and in materials and articles intended to come into contact with food Mineral oil hydrocarbons (MOH), Mineral oil saturated hydrocarbons (MOSH), mineral oil aromatic hydrocarbons (MOAH), polyolefin oligomeric saturated hydrocarbons (POSH) and polyolefin oligomeric aromatic hydrocarbons (POAH) are not used as direct additives. Polyolefin oligomeric hydrocarbons (POH) are present in polymer and represent the low molecular weight fraction. However, we use white oil and vaselin as processing aids. This product has not been tested for these chemical substances. Tallow and its derivates (BSE/TSE) The concerns relative to BSE/TSE in the context of plastic materials used in contact with food are linked to the use of additives of animal origin: tallow derivatives. Above mentioned polymer is not TSE/BSE dangerous product. We declare, that during manufacturing of this product we use animal origin substances. GMO (GENETICALLY MODIFIED SUBSTANCES) We declare that during manufacturing of this product we do not intentionally add genetically modified substances. Date of issue: 30.06.2021 Version: 2021_v2 Prepared by: Gál Marietta Polyethylene TIPELIN 7100S The joint product portfolio of MOL Petrochemicals and Slovnaft provides infinite opportunities 5 Kosher and Halal certification This product is not Kosher and Halal certified. We certify, that during manufacturing of this product, we do not use or intentionally incorporate into this product ethanol and porcines. BfR (Bundesinstitut für Risikobewertung) III. Polyethylene This product meets requirements given by BfR (Bundesinstitut fur Risikobewertung), III. Polyethylene Recommendation for the materials intended to come into contact with food. Swiss Ordinance We confirm that the above mentioned product complies with Swiss ordinance 817.023.21. During