ah aspenhome R ASSEMBLY INSTRUCTIONS ITEM NO: I249-412-TAL Queen Panel HB I249-402-TAL Queen Rails I249-413-TAL Queen Panel FB Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may come loose inside the carton during shipment. UNIT SHOULD BE INSTALLED BY 2 OR MORE PERSONS. I249-412 All Beds need to be set up in the exact final location so that after full assembly it will not need to be moved. Moving the bed will cause the support legs to move out of perpendicular (90 degree), weaken the support system, and may allow the bed to collapse. TOOLS REQUIRED (NOT PROVIDED) PHILLIPS SCREWDRIVER I249-402 I249-413 HARDWARE LIST: I249-412 COMPONENTS LIST: I249-412 No. Description Sketch Quantity No. Description Sketch Quantity A Bolt Ø1/4" x 1-9/16" 4 PCS 1 Headboard 1 PC B Lock Washer Ø1/4" 4 PCS 2 Left Leg 1 PC C Flat Washer Ø1/4" x 3/4" 4 PCS 3 Right Leg 1 PC D Bolt Ø5/16" x 1-3/4" 6 PCS 4 Wood Stretcher 1 PC E Lock Washer Ø5/16" 6 PCS F Flat Washer Ø5/16" x 3/4" 6 PCS COMPONENTS LIST: I249-402 G Allen Wrench 4mm 1 PC No. Description Sketch Quantity 1 Bed rails 2 PCS HARDWARE LIST: I249-402 2 Slats 4 PCS No. Description Sketch Quantity 3 Support Leg (for slat) 4 PCS H Hanger Bolt Ø5/16" x 3-1/2" 8 PCS I Lock Washer Ø5/16" 8 PCS COMPONENTS LIST: I249-413 J Flat Washer Ø5/16" x1/2" 8 PCS No. Description Sketch Quantity K Hex Nut Ø5/16" 8 PCS 1 Footboard 1 PC L Hex Wrench 12mm 1 PC 2 Square Foot 2 PCS M Wood Screw M4 x 1-1/2" 8 PCS BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS. Save these instructions for future reference. FOR INDOOR USE ONLY Page 1/4 MADE IN VIETNAM 07-23-2020 ah aspenhome R ASSEMBLY INSTRUCTIONS ITEM NO: I249-412-TAL Queen Panel HB I249-402-TAL Queen Rails I249-413-TAL Queen Panel FB STEP 1: Lay the headboard face down on a soft surface. Attach the left leg and right leg to headboard by using 6 bolts(D), lock washers(E) and flat washers(F). G D E F Right Leg Left Leg STEP 2: Attach the wood stretcher to the legs by using 4 bolts(A), lock washers(B) and flat washers(C). C B A G STEP 3: Put the footboard upside down on a soft surface, attach the square feet to the bottom of footboard and align them flat side forward. Turn the assembled footboard to the upright position. Square Foot Page 2/4 MADE IN VIETNAM 07-23-2020 ah aspenhome R ASSEMBLY INSTRUCTIONS ITEM NO: I249-412-TAL Queen Panel HB I249-402-TAL Queen Rails I249-413-TAL Queen Panel FB STEP 4: Screw the bolts(H) into HB & FB. Make sure the slat bearer is in the lower position. Align the bolts with the holes in the end of side rails and attach the side rails to HB & FB using Flat Washer (J), lock washers(I) and nuts (K).Then use a hex wrench to tighten all the nuts. Headboard H J Side Rail I K L Slat bearer Make sure the slat bearer is in the lower position. Side Rail This End Up Slat STEP 5: Attach the support legs with levelers to the slats. Adjust the levelers on bottom of support legs when necessary. Support Leg (for slat) STEP 6: Arrange the slats on the slat bearers equally and attach to the slat bearers with wood screws (M). Leveler Wood Screws (M) Page 3/4 MADE IN VIETNAM 07-23-2020 ah aspenhome R ASSEMBLY INSTRUCTIONS ITEM NO: I249-412-TAL Queen Panel HB I249-402-TAL Queen Rails I249-413-TAL Queen Panel FB FUNCTIONALITY INSTRUCTION I249-412 Double Powered USB Port for Charging on both sides I249-402 I249-413 Page 4/4 MADE IN VIETNAM 07-23-2020 ah aspenhome R ASSEMBLY INSTRUCTIONS ITEM NO: I249-412-TAL Queen Panel HB I249-402S-TAL Queen Side Storage Rails I249-413-TAL Queen Panel FB Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may come loose inside the carton during shipment. UNIT SHOULD BE INSTALLED BY 2 OR MORE PERSONS. I249-412 All Beds need to be set up in the exact final location so that after full assembly it will not need to be moved. Moving the bed will cause the support legs to move out of perpendicular (90 degree), weaken the support system, and may allow the bed to collapse. TOOLS REQUIRED (NOT PROVIDED) PHILLIPS SCREWDRIVER I249-402S I249-413 HARDWARE LIST: I249-412 COMPONENTS LIST: I249-412 No. Description Sketch Quantity No. Description Sketch Quantity A Bolt Ø1/4" x 1-9/16" 4 PCS 1 Headboard 1 PC B Lock Washer Ø1/4" 4 PCS 2 Left Leg 1 PC C Flat Washer Ø1/4" x 3/4" 4 PCS 3 Right Leg 1 PC D Bolt Ø5/16" x 1-3/4" 6 PCS 4 Wood Stretcher 1 PC E Lock Washer Ø5/16" 6 PCS F Flat Washer Ø5/16" x 3/4" 6 PCS COMPONENTS LIST: I249-402S G Allen Wrench 4mm 1 PC No. Description Sketch Quantity 1 Side Storage Rail (Left) 1 PC HARDWARE LIST: I249-402S 2 Side Storage Rail (Right) 1 PC No. Description Sketch Quantity 3 Decking 4 PCS H Hanger Bolt Ø5/16" x 3-1/2" 8 PCS 4 Slat 5 PCS I Lock Washer Ø5/16" 8 PCS 5 Support Leg (short) 4 PCS J Flat Washer Ø5/16" x1/2" 8 PCS 6 Support Leg (for slat) 5 PCS K Hex Nut Ø5/16" 8 PCS L Hex Wrench 12mm 1 PC COMPONENTS LIST: I249-413 M Wood Screw M4 x 1-1/2" 10 PCS No. Description Sketch Quantity N Wood Screw M4 x 1" 8 PCS 1 Footboard 1 PC 2 Square Foot 2 PCS BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS. Save these instructions for future reference. FOR INDOOR USE ONLY Page 1/4 MADE IN VIETNAM 07-23-2020 ah aspenhome R ASSEMBLY INSTRUCTIONS ITEM NO: I249-412-TAL Queen Panel HB I249-402S-TAL Queen Side Storage Rails I249-413-TAL Queen Panel FB G STEP 1: Lay the headboard face down on a soft surface. Attach the left leg and right D leg to headboard by using 6 bolts(D), lock E washers(E) and flat washers(F). F Right Leg Left Leg STEP 2: Attach the wood stretcher to the legs by using 4 bolts(A), lock washers(B) and flat washers(C). C B A G STEP 3: Lay the side storage rails face down on a soft surface. Attach the support legs (short) to side storage rails. Support Leg (short) I249-402S STEP 4: Put the footboard upside down on a soft surface, attach the square feet to the bottom of footboard and align them flat side forward. Turn the assembled footboard to the upright position. Square Foot Page 2/4 MADE IN VIETNAM 07-23-2020 ah aspenhome R ASSEMBLY INSTRUCTIONS ITEM NO: I249-412-TAL Queen Panel HB I249-402S-TAL Queen Side Storage Rails I249-413-TAL Queen Panel FB STEP 5: Screw the bolts(H) into HB & FB. Align the bolts with the holes in the end of side storage rails and attach the side storage rails to HB & FB using flat washers(J), lock washers(I) and nuts (K). Ensure the drawers are situated close to the footboard. Then use a hex wrench(L) to tighten all the nuts. Headboard H J I K L Leveler Adjust the leveler when necessary This End Up STEP 6: Attach the support legs (for slats) with levelers to the slats. Slat Adjust the levelers on bottom of support legs when necessary. STEP 7: Arrange slats on the side storage rails and then lay the decking on top of the slats. Make sure the top and bottom slats are Support Leg situated underneath the pre-drilled holes as shown below in STEP 8. (for slat) Remove the decking and attach slats to the side storage rails with wood screws (M). Leveler Wood Screws (M) Page 3/4 MADE IN VIETNAM 07-23-2020 ah aspenhome R ASSEMBLY INSTRUCTIONS ITEM NO: I249-412-TAL Queen Panel HB I249-402S-TAL Queen Side Storage Rails I249-413-TAL Queen Panel FB STEP 8: Put the decking over the slats, secure decking to the slats with wood screws (N) through the pre-drilled holes in the decking as shown below. Make sure that there is a slat under the pre-drilled hole. Decking N Pre-drilled hole The slat should support both pieces of decking. Decking Decking Slat FUNCTIONALITY INSTRUCTION I249-412 Double Powered USB Port for Charging on both sides I249-402S Cedar-lined Side Rail Drawers I249-413 Page 4/4 MADE IN VIETNAM 07-23-2020 ah aspenhome R ASSEMBLY INSTRUCTIONS ITEM NO: I249-415-TAL King Panel HB I249-406-TAL King Rails I249-410-TAL Cal King Rails I249-417-TAL King Panel FB Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may come loose inside the carton during shipment.