AIR CONDITIONING ACCESSORIES NEW DESIGN PHD12 Pilot-House Defroster Individual Ducts for Each Pane of Glass Key Benefits ■■ Custom configuration for up to six duct ring outlets ■■ May be mounted horizontally or vertically ■■ Fan-with-heat or fan-only modes ■■ Lightweight marine-grade aluminum construction ■■ Tapered duct housing permits easy mounting and installation of ducting ■■ Slimline style fits easily in overhead applications or under pilot-house coaming area ■■ Two-part epoxy polyurethane paint resists chipping and corrosion ■■ Replaceable filter assembly Marine Air's PHD12 pilot-house defroster is designed to remove any moisture or condensation that may form on the inside of a windshield. It can be mounted horizontally or vertically under the ■■ Available with high-velocity blowers coaming area of the pilot house or overhead. ■■ Meets or exceeds applicable ABYC and US Coast Guard regulations, CE PHD12 units operate by using electric heat that takes cabin air and raises the temperature through directives, and general Air Conditioning the use of finned heating elements mounted in the defroster chamber. and Refrigeration (ARI) standards In order to accommodate the wide range of styles and number of glass areas in yachts, the PHD12 incorporates individual ducts dedicated to each pane so that all surface areas are treated. Heated air is driven through the ducts via a high-velocity blower. ISO 9001:2008 L-3068 Rev. 20150213 AIR CONDITIONING ACCESSORIES PHD12 Pilot-House Defroster Specifications Model PHD12HV PHD12HVZ Air Flow (cfm/m3h) 325/552 325/552 Voltage @ 50/60Hz 1-Ph (V) 115 230 Full Load Amps (FLA) Heat (A) 14.2 7.1 Full Load Amps (FLA) Blower (A) 1.14 0.61 Electric Heat (kW) 1.5 Heater Amps (A) 13.0 6.5 Max. Circuit Breaker (A) 15 10 Min. Circuit Ampacity (A) 15 8 External Static Pressure (inH2O/Pa) 0.2/49 Supply Duct Size Diameter (in/mm) Number and diameter of duct rings is based on customer’s specifications Supply Air Grille Area (sq. in/sq. cm) (1) 88/568 Return Air Grille Area (sq. in/sq. cm) 130/839 Net Weight (lbs/kg) 30/13.6 30/13.6 Gross Weight (in/mm) 48.5/22 48.5/22 1 Maximum recommended free area of supply air grille(s). Cross-sectional area of the supply air ducts must be at least 58 sq. in. (374 sq. cm). Larger ducts may be needed when the total duct length exceeds 20 ft. (6 m), has more than three 90° bends, or has a transition box. Dimensions Vertical Unit Conguration Horizontal Unit Conguration 1.0 in. (25 mm) 14.28 in. (363 mm) 28.1 in. 32.75 in. (714 mm) 22.38 in. Bottom (815 mm) (569 mm) of Unit 28.1 in. Electrical 18.24 in. (714 mm) Panel (464 mm) Access 10.71 in. 9.7 in. Air Intake/Filter Air Intake/Filter (272 mm) (247 mm) Air 4.0 in.* Air Intake (101 mm) Intake Air 4.0 in.* (101 mm) 11.19 in. Intake 0.84 in. 17.9 in. 9.7 in. Mounting (285 mm) (22 mm) (454 mm) (247 mm) 19.89 in. Surface 20.9 in. 11.7 in. (506 mm) (530 mm) (297 mm) Mounting NOTE: All four feet swivel 360° in both vertical and horizontal installations. Surface * Minimum 4 in. (101 mm) clearance required for proper air ow. DOMETIC MARINE DIVISION Dealer 2000 N. Andrews Ave. Ext. | Pompano Beach, FL 33069 USA | Tel. 954-973-2477 | Fax: 954-979-4414 www.Dometic.com/Marine | [email protected] 24/7 TECH SUPPORT FOR UNITED STATES & CANADA: 8:00 AM to 5:00 PM Eastern Time: 800-542-2477 After hours and weekends: 888-440-4494 INTERNATIONAL SALES & SERVICES Europe & the Middle East: Call +44(0)870-330-6101 For all other areas visit our website to find your nearest distributor. Assembled in the USA Environmentally L-3068 Rev. 20150213 Specifications and availability subject to change without notice. Responsible.