UTTAR PRADESH METRO RAIL CORPORATION LIMITED TENDER DOCUMENT FOR DESIGN, MANUFACTURING, SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF FULLY AUTOMATIC CNC UNDER FLOOR PIT WHEEL LATHE MACHINE FOR KANPUR AND AGRA METRO DEPOTS TENDER “KNAG-01” APRIL 2020 UTTAR PRADESH METRO RAIL CORPORATION LIMITED (MASS RAPID TRANSPORT SYSTEM) Administrative Building, Vipin Khand, Gomti Nagar Lucknow-226 010 (Uttar Pradesh) Website: www.upmetrorail.com CONTENTS S. No. Item Description 1 NOTICE INVITING TENDER (NIT) PART-I 1 INITIAL FILTER CRITERIA 2 INSTRUCTIONS TO TENDERERS (ITT) 3 GENERAL CONDITIONS TO CONTRCT (GCC) 4 SPECIAL CONDITIONS OF CONTRACT (SCC) PART-II 1 GENERAL SPECIFICATIONS 2 TECHNICAL SPECIFICATIONS 3 FORMAT FOR TENDERER’S OFFER FORM OF TENDER SCHEDULES & APPENDICES BILL OF QUANTITY FINANCIAL PROPOSAL BY TENDERER 4 SITE DRAWINGS NOTICE INVITING TENDER (NIT) UTTAR PRADESH METRO RAIL CORPORATION LTD. Administrative Building, Vipin Khand, Gomti Nagar Lucknow-226010 NOTICE INVITING TENDER Invitation to Global Tender KNAG-01: Design, Manufacturing, Supply, Installation, Testing & Commissioning of Fully Automatic CNC Under Floor Pit Wheel Lathe Machine for Kanpur and Agra Metro Depots of Uttar Pradesh Metro Rail Corporation Limited. 1. General: Uttar Pradesh Metro Rail Corporation (UPMRC) Ltd. invites global tenders from eligible applicants from all countries and all areas, for the scope “Design, Manufacturing, Supply, Installation, Testing & Commissioning of Fully Automatic CNC Under Floor Pit Wheel Lathe Machine for Kanpur and Agra Metro Depots”. 2. Key Details: Description of Work KNAG-01: Design, Manufacturing, Supply, Installation, Testing & Commissioning of Fully Automatic CNC Under Floor Pit Wheel Lathe Machine for Kanpur and Agra Metro Depots Quantity 04 no. Cost of Tender Document 21,000/- (inclusive of all Taxes) (In the form of Demand Draft in favour of “U.P. Metro Rail Corporation Ltd” issued by schedule commercial bank based in India, payable at Lucknow.) Earnest Money/ Tender INR 25,69,314/- Guarantee Tender documents on sale 05.05.2020 from Last date & time of 08.06.2020 up to 1500hrs submission of bids Date & Time of opening of 08.06.2020 up to 1530hrs bids 3. Eligibility Criteria for the above equipments can be referred in the Tender Document-KNAG-01. 4. Sale of Tender Document: 4.1 Non-transferable Bid Document containing description of the items required as also the other terms & conditions are available on payment of non-refundable fee of INR 21,000(Rupees Twenty One Thousand Only) (Inclusive of all taxes) in the form of a crossed Demand Draft / Banker's Cheque drawn on a scheduled 1 commercial Bank based in India, in favour of ‘U.P Metro Rail Corporation Limited’, payable at Lucknow, from the office of: Chief Electrical Engineer (Rolling Stock) U.P Metro Rail Corporation Limited Administrative Building, Vipin Khand, Gomti Nagar, Lucknow (UP)-226010, India 4.2 The sale of document will be closed at 17.00 hrs. on previous day to the day of submission of Bids. 4.3 Non-transferable Bid Document can also be obtained by post on written request by the bidder on his letterhead duly paying the cost of Bid Document as mentioned above. Tender document can also be downloaded from UPMRC's website www.upmetrorail.com, in which case the cost of the tender document, in the form as mentioned above may be submitted in a separate envelope along with the bid. 4.4 Addendum/corrigendum, if any, will not be published in the newspaper and the same will be uploaded on UPMRC's website mentioned above. 5. Tenders shall be submitted to the office of Dy.COS/UPMRC at the address given above not later than mentioned date and time. 6. Please note carefully the requirements for submitting tenders, and the date and time for submittal. Late and delayed tenders will not be accepted. 7. Offers shall be valid for a period of 180 days from the last date of submission of Tenders, and shall be accompanied by Earnest Money/Tender Guarantee as described in Paragraph 6 of the “Instruction to Tenderer”. Chief Electrical Engineer (Rolling Stock) On behalf of U.P. Metro Rail Corporation Limited Administrative Building, Vipin Khand, Gomti Nagar, Lucknow (UP)-226010, India 2 PART- I INITIAL FILTER CRITERIA INITIAL FILTER CRITERIA (A) FILTER OF APPLICANTS – CHECKLIST Name of Applicant: S.No. Criteria Yes No 1 Has the Applicant abandoned any work in the last ten(10) years? 2 Has the Applicant involved in two or more litigations in the concluded/ongoing contracts in the last ten (10) years? 3 Has the Applicant suffered bankruptcy / insolvency in the last ten(10) years? 4 Has the Applicant been debarred by Government of India/any state government in India/Central or State government undertaking as on the due date of submittal?( Bidder to furnish a specific under taking to effect) 5 Has any misleading information been given in this application? 6 Has the applicant certified that no agent / middleman has been or will be engaged or any agency commission been or will be paid? 7 Is the Net Worth of the applicant (to be obtained from Balance Sheets Appendix FT-7) in the immediate previous financial year as considered in the bidder’s country of origin “POSITIVE”? 8 Has the Applicant submitted the Statement for Covenant of Integrity as per Appendix FT-11(a) and Declaration/Undertaking in line with Code of Integrity, rule 175 (1)(i)(h) of the General Financial Rules, Government of India as per Appendix FT- 11(b)? Note: 1) ‘‘Ten (10) years’/’Last ten(10) years’ means the period of last ten(10) years ending on 31st March 2020. 2) A “YES” answer to any question 1, 2, 3, 4, 5, will disqualify the Applicant. 3) A “NO” answer to question 6 ,7 & 8 will disqualify the Applicant. 4) In the case of a Joint Venture/Consortium/, each Individual member must qualify individually in the ‘Filter of Applicants– Check List’ except item -7. 5) In the case of a Joint Venture/Consortium, each member shall submit the balance sheet and Appendix-FT-7 duly filled. Evaluation for the item. No. 7 above will be done in totality (aggregate of the evaluation of each member) and not as individual member. 6) DEBARRED means that the applicant( applies to each member of JV/Consortium) has been black listed or debarred by Government of India/any state government in India/Central or State government undertaking from participating in the tenders for a notified period of time. Copy of the notification of such debarment shall be submitted in the bid. (See the format below): By virtue of my signature below, I confirm and verify to my best knowledge and belief that the company represented by me for submitting bid against this tender is not DEBARRED as on the date of submission of bid. I also confirm that at any stage of tender evolution if it is found that the above information given by me is incorrect then our offer shall be rejected without further correspondance. SIGNATURE OF TENDERER (To be signed by applicant and each member of the group) Date………………. 1 (B) ELIGIBILITY QUALIFICATION CRITERIA: a. The bidder or consortium/JV lead partner must be a proven manufacturer of Fully Automatic CNC Under Floor Wheel Lathe who must meet the following conditions on date of opening of tender: Col 1 Conditions Quantity i The Fully Automatic CNC Under Floor Wheel Lathe, which the bidder or lead partner must have supplied & commissioned in last 10 five years ending on 31st March 2020. i(a) Out of 10 nos. of Fully Automatic CNC Under Floor Wheel Lathe, which the bidder or lead partner must have supplied & commissioned minimum numbers of Fully Automatic CNC Under Floor Wheel Lathe that should be in operation outside the 06 country of origin or in India in last five years ending on 31st March 2020. The tenderer shall submit the complete information as per the enclosed Appendix FT-8. ii Out of the supplied Fully Automatic CNC Under Floor Wheel Lathe by the bidder or lead partner in the last five years i.e., ending on 31st March 2020, minimum number of Fully Automatic CNC Under Floor Wheel Lathe that should be in operation with satisfactory performance for a minimum period of 2 years after commissioning as on the date of opening of tender and supported by a recent 04 performance certificate from clients. The tenderer shall attach the certificate from the clients for satisfactory operation of the machine. The certificate should not be older than 6 months on the date of opening of tender. ii(a) Out of these 04 nos. Fully Automatic CNC Under Floor Wheel Lathe that should be in operation with satisfactory performance for a minimum period of 2 years after commissioning minimum numbers of Fully Automatic CNC Under Floor Wheel Lathe that should be in operation outside the country of origin or in India 02 as on the date of opening of tender and supported by a recent performance certificates from clients, not older than 6 months on the date of opening of tender. The manufacturing unit, where the Fully Automatic CNC Under Floor Wheel Lathe is proposed to be manufactured & supplied against this tender, should have experience of manufacturing of at least 10 nos. Fully Automatic CNC Under Floor Wheel Lathe in last five years i.e. ending on 31st March 2020, out of which at least 04 nos. should have been working satisfactorily after commissioning for a minimum period of two years as on the date of opening of bids. The bidder shall give complete details to establish the credentials of the proposed manufacturing unit as mentioned herein. b. If a joint venture or consortium submits the bid, then lead partner should meet the criteria at a [i, i(a), ii & ii(a)] as above.