Draft ETSI EN 302 296 V2.0.2 (2016-10) HARMONISED EUROPEAN STANDARD Digital Terrestrial TV Transmitters; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU 2 Draft ETSI EN 302 296 V2.0.2 (2016-10) Reference REN/ERM-TG17-24 Keywords broadcasting, digital, Harmonised standard, radio, regulation, terrestrial, transmitter, TV, video ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88 Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. © European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI 3 Draft ETSI EN 302 296 V2.0.2 (2016-10) Contents Intellectual Property Rights ................................................................................................................................ 5 Foreword ............................................................................................................................................................. 5 Modal verbs terminology .................................................................................................................................... 5 Introduction ........................................................................................................................................................ 5 1 Scope ........................................................................................................................................................ 6 2 References ................................................................................................................................................ 6 2.1 Normative references ......................................................................................................................................... 6 2.2 Informative references ........................................................................................................................................ 7 3 Definitions, symbols and abbreviations ................................................................................................... 7 3.1 Definitions .......................................................................................................................................................... 7 3.2 Symbols .............................................................................................................................................................. 8 3.3 Abbreviations ..................................................................................................................................................... 9 4 Technical requirements specifications ..................................................................................................... 9 4.1 Environmental profile ......................................................................................................................................... 9 4.2 Conformance requirements .............................................................................................................................. 10 4.2.1 Introduction................................................................................................................................................. 10 4.2.2 Spurious emissions ..................................................................................................................................... 10 4.2.2.1 Definition .............................................................................................................................................. 10 4.2.2.2 Limits .................................................................................................................................................... 10 4.2.2.3 Conformance test .................................................................................................................................. 11 4.2.3 Out-of-band emissions ................................................................................................................................ 11 4.2.3.1 Definition .............................................................................................................................................. 11 4.2.3.2 Classification of transmitters ................................................................................................................. 12 4.2.3.3 Limits .................................................................................................................................................... 12 4.2.3.4 Conformance test .................................................................................................................................. 16 5 Testing for compliance with technical requirements .............................................................................. 17 5.1 Environmental conditions for testing ............................................................................................................... 17 5.2 Interpretation of the measurement results ........................................................................................................ 17 5.3 Test conditions ................................................................................................................................................. 17 5.3.1 Test frequency range ................................................................................................................................... 17 5.3.2 Test modulation signal ................................................................................................................................ 18 5.4 Essential radio test suites .................................................................................................................................. 18 5.4.1 Introduction................................................................................................................................................. 18 5.4.2 Spurious emissions ..................................................................................................................................... 18 5.4.2.1 Measurement approaches ...................................................................................................................... 18 5.4.2.2 Initial conditions ................................................................................................................................... 19 5.4.2.3 Test procedure ....................................................................................................................................... 19 5.4.2.4 Test requirements .................................................................................................................................. 19 5.4.2.5 Test arrangement ................................................................................................................................... 20 5.4.3 Out-of-band emissions ................................................................................................................................ 20 5.4.3.1 Initial conditions ................................................................................................................................... 20 5.4.3.2 Test procedure ....................................................................................................................................... 20 5.4.3.3 Test requirements .................................................................................................................................. 21 5.4.3.4 Test arrangement ................................................................................................................................... 21 Annex A (normative): Relationship between the present document and