DETROIT DIESEL Document/Go to Page Series 50&60 engines Construction&Industrial Applications 2 2002 Series 60 Truck Power (330-575 bhp) 4 Motor Coach Series 60 (330-500 bhp) 6 Motor Coach Series 60 (330-500 bhp) 8 Series 60 Truck Power 10 Series 60 Commercial-Continuous (375-400 bhp) 12 Series 60 Pleasurecraft-Maximum (700 bhp) 14 Series 60 Pleasurecraft-Maximum (825 bhp) 16 Commercial-Intermittent-Maximum (625 bhp) 18 Series 50 20 Series 50 & 60 Engines Construction & Industrial Applications General Specifications Series 50 Series 60 Series 60 Basic Engine 4 cycle 4 cycle 4 cycle Number of Cylinders 4 6 6 Bore x Stroke in (mm) 5.1 in x 6.3 in 5.1 in x 6.3 in 5.24 x 6.61 Series 50 (130 mm x 160 mm ) (130 mm x 160 mm) (133 mm x 168 mm) Control DDEC® DDEC® DDEC® Displacement 8.5L 12.7L 14.0L Dimensions: (approx.) Length, in (mm) 44.3 (11.25) 57.2 (1453) 57.2 (1453) Width, in (mm) 35.3 (897) 34.3 (872) 34.3 (872) Height, in (mm) 52.8 (1341) 54.2 (1377) 54.2 (1377) Weight, lbs (kg) 2190 (993) 2550 (1157) 2550 (1157) Series 60 Detroit Diesel Offers A Complete Line Of Engines For Heavy-Duty Applications Including Surface And Underground Mines, Oil Exploration, Construction, Haul Trucks, Generator Sets, Shovels, Loaders, Locomotives, Cranes, Air Compressors And Pumps. Rated Power Output and Peak Torque SERIES 50 325 BHP (242 kW) @ 1800/2100 RPM 14.0L SERIES 60 250 BHP (187 kW) @ 1800 RPM 1150 lb-ft (1559 N•m) @ 1350 RPM 450 BHP (336 kW) @ 2100 RPM* 800 lb-ft (1085 N•m) @ 1350 RPM 1650 lb-ft (2237 N•m) @ 1350 RPM 350 BHP (261 kW) @ 1800/2100 RPM 275 BHP (205 kW) @ 1800 RPM 1350 lb-ft (1831 N•m) @ 1350 RPM 525 BHP (392 kW) @ 1800/2100 RPM 900 lb-ft (1220 N•m) @ 1350 RPM 1800 lb-ft (2441 N•m) @ 1350 RPM 375 BHP (205 kW) @ 1800/2100 RPM 300 BHP (224 kW) @ 1800 RPM 1350 lb-ft (1831 N•m) @ 1350 RPM 550 BHP (410 kW) @ 1800/2100 RPM 1000 lb-ft (1356 N•m) @ 1350 RPM 1750 lb-ft (2373 N•m) @ 1350 RPM 400 BHP (224 kW) @ 1800/2100 RPM 315 BHP (235 kW) @ 1800 RPM 1400 lb-ft (1898 N•m) @ 1350 RPM 575 BHP (429 kW) @ 1800/2100 RPM 1050 lb-ft (1424 N•m) @ 1350 RPM 1750 lb-ft (2373 N•m) @ 1350 RPM 425 BHP (317 kW) @ 1800/2100 RPM 350 BHP (261 kW) @ 1800/2100 RPM 1475 lb-ft (2000 N•m) @ 1350 RPM 600 BHP (448 kW) @ 1800/2100 RPM 1050 lb-ft (1424 N•m) @ 1350 RPM 1900 lb-ft (2576 N•m) @ 1350 RPM 450 BHP (336 kW) @ 1800/2100 RPM 315 BHP (235 kW) @ 2200 RPM 1550 lb-ft (2102 N•m) @ 1350 RPM 630 BHP (470 kW) @ 1800/2100 RPM 1050 lb-ft (1424 N•m) @ 1350 RPM 1900 lb-ft (2576 N•m) @ 1350 RPM 475 BHP (354 kW) @ 1800/2100 RPM 350 BHP (261 kW) @ 2200 RPM 1550 lb-ft (2102 N•m) @ 1350 RPM 550 BHP (410 kW) @ 2300 RPM 1050 lb-ft (1424 N•m) @ 1350 RPM 1750 lb-ft (2373 N•m) @ 1350 RPM 500 BHP (373 kW) @ 1800/2100 RPM 1550 lb-ft (2102 N•m) @ 1350 RPM 600 BHP (448 kW) @ 2300 RPM 12.7L SERIES 60 1900 lb-ft (2576 N•m) @ 1350 RPM 300 BHP (224 kW) @ 1800/2100 RPM 1050 lb-ft (1424 N•m) @ 1350 RPM 500 BHP (373 kW) @ 2100/2300 RPM 665 BHP (496 kW) @ 2300 RPM 1650 lb-ft (2237 N•m) @ 1350 RPM 1900 lb-ft (2576 N•m) @ 1350 RPM 525 BHP (392 kW) @ 1800/2100 RPM *Continuous rating 1750 lb-ft (2373 N•m) @ 1350 RPM Performance Curves - 06N04M7829 Series 60 34.3 in 57.2 in (923 mm) (1453 mm) 54.2 in (1377 mm) Power Power output guaranteed within +2/-0% at SAE J1995 conditions: All dimensions are approximate. For complete dimensional information, 77°F (25°C) air inlet temperature refer to installation drawing provided by your authorized Detroit Diesel 29.31 in. Hg (99 kPa) dry barometer Corporation representative. 100∞F (38°C) fuel inlet temperature .838 specific gravity at 100°F (38°C) Rating Explanation Consult your authorized Detroit Diesel Corporation representative for the rating that will apply to your application. Standard Equipment ■ Detroit Diesel Electronic Controls 12/24V* ■ DDEC Data ■ Unit Injectors Torque ■ Overhead Camshaft ■ Articulated Pistons ■ Wet-Type Cylinder Liners ■ SAE #1 Flywheel Housing Power output guaranteed within +2/-0% at SAE J1995 conditions: ■ Spin-On Full Flow Oil Filters 77°F (25°C) air inlet temperature ■ 29.31 in. Hg (99 kPa) dry barometer Coolant Conditioner 100∞F (38°C) fuel inlet temperature ■ Composite Oil Pan .838 specific gravity at 100°F (38°C) ■ Composite Rocker Cover ■ Air To Air Charge Cooling ■ Turbocharged *DDEC is a complete engine control and protection system. Over 650,000 DDEC engines are in service. EPA & Euro nonroad certified Fuel Optional Equipment ■ Air Compressor 13, 16, 26 CFM ■ Alternator 12/24V ■ Starter 12/24V ■ Front Mount Performance shown includes: ■ Rear PTO Air intake restriction: 10 in. H2O (2.5kPa) ■ Exhaust back pressure: 15 in. H2O (3.7kPa) SAE #0 Flywheel Housing Fuel Density: 6.99 lb/gal ■ Remote Oil Filters ■ Hydraulic Pump Drive ■ Aluminum Oil Pan ■ Aluminum Rocker Cover MTU Friedrichshafen GmbH Detroit Diesel Corporation ■ Engine Brakes 13400 Outer Drive, West 88040 Friedrichshafen Detroit, Michigan 48239-4001, USA Germany For Additional Technical Information, Ratings, or Performance Data, Consult your local DDC Distributor. Phone +1 313-592-5000 Phone +49 (0)7541 90-2998 Fax +1 313-592-5625 Fax +49 (0)7541 90-3946 [email protected] [email protected] www.detroitdiesel.com www.mtu-online.com For additional information, contact your local distributor or dealer 3SA324ev Subject to modifications in the interest of technical progress. SIMD 07 312 (56 1E) 1//02 Printed in USA 2002 - 02 2002 ® Truck Power Number of Cylinders 6 Inline Air System Turbocharged Air-to-Air Charge Cooling Control DDEC® Specifications 12.7L 14.0L Bore and Stroke 5.12 in x 6.30 in 5.24 in x 6.62 in (130 mm x 160 mm) (133 mm x 168 mm) Displacement 778 cu in (12.7 liters) 858 cu in (14.0 liters) Compression Ratio 16.5:1 16:1 Dimensions: (approx.) Length 57 in (1448 mm) 57 in (1448 mm) Width 34 in (864 mm) 34 in (914 mm) Height 50 in (1273 mm) 50 in (1273 mm) Weight (dry) 2640 lbs (1198 kg) 2640 lbs (1198 kg) Ratings 330 – 575 Horsepower Series 60 Features Maximum HP @ RPM Peak Torque @ RPM Overhead Camshaft 12.7L ■ Maximum fuel injection pressure ■ Fewer parts 330 HP @ 2100 RPM 1250FT-LB @ 1200 RPM ■ Easy to service 330 HP @ 2100 RPM 1350FT-LB @ 1200 RPM One Piece Cylinder Head 330/350 @ 2100 RPM 1350FT-LB @ 1200 RPM ■ Maximum structural rigidity between the block and head 330/375 @ 2100 RPM 1350FT-LB @ 1200 RPM ■ Eight head bolts per cylinder create one million pounds 350 HP @ 2100 RPM 1250FT-LB @ 1200 RPM of clamp load for unmatched head gasket life 350 HP @ 2100 RPM 1350FT-LB @ 1200 RPM Four Valves Per Cylinder 375 HP @ 2100 RPM 1350FT-LB @ 1200 RPM Short Intake and Exhaust Ports for maximum performance 375 HP @ 2100 RPM 1550FT-LB @ 1200 RPM and economy 375/430 @ 2100 RPM 1550FT-LB @ 1200 RPM Unit Fuel Injectors for ease of service and troubleshooting 400 HP @ 2100 RPM 1550FT-LB @ 1200 RPM 430 HP @ 2100 RPM 1550FT-LB @ 1200 RPM Variable Output Turbocharger combined with a pulse tuned 375 HP @ 2100 RPM 1450FT-LB @ 1200 RPM exhaust manifold for better acceleration at low and medium speeds and improved engine braking performance 375/430 @ 2100 RPM 1450FT-LB @ 1200 RPM 400 HP @ 2100 RPM 1450FT-LB @ 1200 RPM DDEC – Detroit Diesel Electronic Controls 430 HP @ 2100 RPM 1450FT-LB @ 1200 RPM The most advanced system available ■ Maximizes performance and economy 14.0L ■ Built-in diagnostics 435 HP @ 2100 RPM 1650FT-LB @ 1200 RPM ■ Self troubleshooting 435/475 @ 2100 RPM 1650FT-LB @ 1200 RPM DDEC provides all the management tools and reports needed 435/500 @ 2100 RPM 1650FT-LB @ 1200 RPM to manage any fleet and to increase the profitability of every 475 HP @ 2100 RPM 1650FT-LB @ 1200 RPM Owner/Operator. 500 HP @ 2100 RPM 1650FT-LB @ 1200 RPM Exhaust Gas Recirculation (EGR) for maximum fuel economy and performance while meeting the new emissions standards. 435 HP @ 2100 RPM 1550FT-LB @ 1200 RPM 435/475 @ 2100 RPM 1550FT-LB @ 1200 RPM Series 60 Continues To Provide Truckers With The Best 435/500 @ 2100 RPM 1550FT-LB @ 1200 RPM Combination Of: ■ ■ 475 HP @ 2100 RPM 1550FT-LB @ 1200 RPM Performance Fuel Economy ■ Reliability ■ Low Cost Of Operation 500 HP @ 2100 RPM 1550FT-LB @ 1200 RPM ■ Proven Durability ■ Driver Satisfaction 14.0L Coming In 2003 ■ High Residual Value ■ Proven Electronics – DDEC ■ Flexible Power Ratings 500 HP @ 2100 RPM 1850FT-LB @ 1200 RPM ■ Excellent Parts And Service Support 550 HP @ 2100 RPM 1650FT-LB @ 1200 RPM 550 HP @ 2100 RPM 1850FT-LB @ 1200 RPM 575 HP @ 2100 RPM 1850FT-LB @ 1200 RPM The Only Engine For 2002 Photograph illustrates a typical truck engine For a complete listing of standard and optional equipment, consult your distributor Rating conditions of SAE: 77°F (25°C) and 29.31 in Hg (99 kPa) Barometer (Dry) or authorized Detroit Diesel Corporation representative.