GameCube Controller Adapter PC Instruction Manual 1 Select the PC mode on the controller adapter. 2 Two USB cables are required to connect the controller adapter to the computer. 3 Connect the Gamecube controller(s) to the controller adapter. It’s then ready for play. Note: The controller(s) work as Direct-Input mode in Windows 7 and above systems, the buttom mapping are shown below. Wired GameCube controller, WaveBird wireless controller Third party controller with the same controller port Switch 1 Select the Switch mode on the controller adapter. 2 Two USB cables are required to connect the controller adapter to the Switch Console. 3 Connect the Gamecube controller(s) to the controller adapter. It is then ready for play. Note: Please upgrade your Switch system to version 4.0 or higher. Turbo functionality Turbo functionality is avilable on Switch / WiiU / PC mode. The turbo function can be assigned to a total of 8 buttons (A, B, X, Y, R, L, Z, START). Activate / Deactive Hold the button you would like to set turbo functionality to, press the Turbo button on the controller adapter to activate / deactive the functionality. Deactive completely When the GameCube controller is unplugged from the controller adapter, the turbo functionality is lost. Note: You can also change the turbo functionality by holding the turbo button on the controller adapter and then press the button you want to change. Wii U Home functionality 1 Select the WiiU mode on the controller adapter. Home functionality is avilable on Switch / WiiU mode. 2 Two USB cables are required to connect the controller adapter to the WiiU Console. 3 Connect the Gamecube controller(s) to the controller adapter. It’s then ready for play. Note: The GameCube controllers will not work in the WiiU’s main menu. You MUST enter the Super Smash Bros game to able to use the GameCube controller..