SPECIFICATIONS ITEM 7

SOUTH CAROLINA TRANSPORT POLICE MEN’S SPECIFICATIONS – LONG

1. Fabric Content: 55% Dacron /45% Tropical Weave conforming to the following specifications. Weight: 8 – 8.5 oz. Per linear yard. Construction: 60 ends per inch 50 picks per inch Tear Strength: Break strength 100 lbs. Warp x 80 lbs. Filling 2. Material Raeford Style #571, Color Light Gray #585. & Color

3. Style Plain front coat style, form fitting, attached, long with barrel cuffs. Two pleated breast with scalloped flaps. Shoulder . Full badge and nameplate reinforcement with round embroidered eyelets. Matching inside yoke and collar band of high luster gray Poly-Twill. 4. Collar & Style and dimensions as specified herein. Collar points shall measure 3-¼" long with fused-in Stand Mylar stays. Stays shall be fused to under side of collar interlining. Collar interlining shall be gray stabilized Mello Press #285. Collar (top or underside) itself shall have no fusing of outer shell fabric to collar interlining. Stay shall be 3” long by ½” wide. Collar height at rear 1- 1/2". Collar shall be topstitched 1/4" off the edge. Collar stand shall measure 1- 5/16" at rear. Collar band shall be die cut and interlined (both material and ) with stabilized "Crease N Tack” to maintain shape of collar band. 5. Front Left front shall have a top center 1-1/2" wide with two rows of stitching centered 7/8" apart. Shirt will have 7 and on the front; spacing between each will be 3-3/4" except the spacing between the neck and the first button on the front, which will be 3- 1/4”. Top center interlined with stabilized gray Mello Press #550. Fronts shall be joined to the yoke so that both raw edges of the yoke are turned under, with the front sandwiched between, and then all three are stitched down with a 1/16” raised stitch. Safety stitch joining unacceptable. 6. Shoulder Style and dimensions as specified herein. Asymmetrical shape with topstitching set back ¼”, to Straps be set on yoke with leading topstitch conforming with front joining . Shoulder straps to measure 2" at sleeve tapering to 1-3/8" and set not more than ½” from folded collar. Cross- stitched approximately 2" from sleeve seam. Shoulder lined with #550 black stabilized Mello Press. Creased and edge stitched construction unacceptable. 7. Badge Two-ply sling 1” wide of body goods centered over left and stitched to shoulder seam Reinforce and flap setting stitch. Shall have two round embroidered eyelets approximately 1” from top of ment pocket flap spaced 1-½” apart and centered on sling. 8. Nameplate Two-ply sling 1” wide of body goods positioned horizontally behind the right front shall be held in place with two round embroidered eyelets spaced 1-3/8” apart and centered 1” above the right pocket flap. 9. Pockets Two breast pockets with 1-½” stitched and mitered corners at bottom. Pocket shall measure 5 5/8" wide by 6" deep. Both breast pockets to have 1-½” pencil stitch. Button sewn onto pocket to align with vertical on flap. 10. Flaps Deep scalloped design to measure 5-7/8" across and 2-3/4" in depth at center point, 2-1/4" at sides. Topstitched ¼” off the edge. Secured to shirtfront approximately 1/4" above pocket. Both flaps shall have invisible pencil opening 1-1/2" to correspond precisely with pencil slot of pocket. Stop and start stitching unacceptable. Both flaps shall be interlined with stabilized gray Mello Press #550. Creased and edge stitched pocket flap construction unacceptable. Each side point of flap(s) to be tacked down to shirt front. 11. Sleeves Straight at width - no bias - of one piece shaped at head, jacket type. Sleeve shall have a one piece round elbow reinforcement and vent set on with single needle topstitching at edge. Elbow reinforcement shall measure approximately 5” at widest width tapering to 1-3/4” wide

1 SPECIFICATIONS ITEM 7

at vent. Vent shall have one button and buttonhole closure centered between top of vent and . Top of vent to have two rows of stitching. Lower facing shall measure approximately 1/2" wide. 12. Cuffs Shall measure 2-7/8" in depth with rounded corners as specified herein. Topstitching shall be set back ¼”. Two buttons and corresponding buttonholes on each cuff. Both cuffs shall be interlined with #550 stabilized gray Mello Press. 13. Buttons First grade 19-ligne melamine to match.

14. Stitching Shall be ¼” double needle stitching at sleeve insertion, yoke, side seams through sleeves and across back yoke. All other topstitching is ¼” off the edge unless otherwise specified.

15. Thread All sewing threads shall be fast color polyester core polyester wrap to match material color. 16. Interlining Collars, Pocket flaps, Top-Center, Cuffs and shoulder straps shall be interlined with 100% stabilized Mello Press. Collar stand interlined with “Crease-N-Tack”. 17. Construction Collars, flaps and shoulder straps are made by the conventional construction. Top ply, bottom ply and interlining are first stitched together, then turned right side out and finally topstitched. 18. Country of All raw materials and assembly thereof shall be made in the U.S.A. Manufacture

19. Packing All shall be thoroughly pressed in conformance with good trade practice on better quality & shirts. Each shirt shall be folded, secured in position, and individually poly bagged. Stainless Marking steel pins shall be used on all shirts at the neck button along with cardboard reinforcement around shirt collar to maintain shape. Two shirts shall be packed to each box on both long and short sleeves. All shirts in any one-shirt box must be the same size with the size clearly marked on the outside of the box. The identity of the contents must also be marked on the outside of the box, such as “L/S Transport Police.” Shipping container (sturdy cartons) must not have any mixed sizes and the size of the shirts contained in each carton and identity (“L/S Transport Police”) must also appear on the outside of the carton. Each individual shirt and shirt box should be labeled with an industrial style UPC code. 20. Special Tag in Collar

A special tag must be sewn in collar stamped with permanent ink, ‘DRY CLEAN ONLY.” Shirt must also have a permanent ink tag indicating shirt size at collar.

21. Shoulder South Carolina Transport Police shoulder patch must be sewn on each shirt, both left and right Patches sleeve. Shall be positioned ¼” below shoulder seam. Shoulder patches shall be furnished by the SC Department of Public Safety to awarded contractor.

2 SPECIFICATIONS ITEM 7

22. Finished Neck Chest Waist Back Yoke Back Side Seams Dimensions Size Width Length

13 37 33 14-1/4 30-3/4 17-1/2 13.4 39 35 15 31 17-5/8 14 41 37 15-3/4 31-1/4 17-3/4 14.5 43 39 16-1/2 31-1/2 17-7/8 15 45 41 17-1/4 31-3/4 18 15.5 47 43 18 32 18-1/8 16 49 45 18-3/4 32-1/4 18-1/4 16.5 51 47 19-1/2 32-1/2 18-3/8 17 53 49 20-1/4 32-3/4 18-1/2 17.5 55 51 21 34 19-5/8 18 57 53 21-3/4 34-1/4 19-3/4 18.5 59 55 22-1/2 34-1/2 19-7/8 19 61 57 23-1/4 34-3/4 20 19.5 63 59 24 35 20-1/8 20 65 61 24-3/4 35-1/4 20-1/4

(Note: Long body shirts finish 3” longer in body than regular body listed above. Long sleeve lengths to finish ½” over marked size.)

3