SPEC SHEET PRODUCT INFORMATION BUILDER BOARD™ FR

Protect surfaces with the same professional grade PRODUCT SPECIFICATIONS you trust from Builder Board,™ now in a specialty Thickness 30.0 mil. (nominal) fire resistant roll.Builder Board™ FR features industry Flame retardant: Class A UL-94, V-0, ASTM E84-05 & NFPA-701* exclusive technology, making it perfect when flame Flame spread index 0 retardant properties are needed on the job. Smoke developed index 0 Basis weight (g/m2 ) 580 / 1.06 Moisture % < 2.0 Breaking strength, MD 60lbs/in

Fire Resistant Recyclable Breathable Heavy Duty Breaking strength, CD 40lbs/in Elongation, MD (%) 2.0 Elongation, CD (%) 4.0 Tear, CD (g*f) 250 Stiffness Taber, MD (g*cm) 180 Cobb, 2 min. (g water/m2) 400 Trade Name Builder Board™ FR Material Use Surface Protection

AVAILABLE SIZES BLDFR36100 Natural 36in x 100ft 24 lbs.

INSTRUCTIONS Remove plastic sleeve. Place on desired surface and unroll. Cut to length with utility knife. Seam multiple pieces together with an appropriate Flame Resistant tape to help protect surfaces for the entire length of the job. Replace as needed.

FEATURES HANDLING AND STORAGE • Specialty version of traditional Builder Board™ with flame No special handling requirements. Keep away from moisture, liquids retardant properties and high humidity. products will not release hazardous chemicals • Durable for the toughest projects—Approx. 30mil under normal conditions of use. • Allows vapors to escape for maximum breathability • More than 3x thicker than rosin & covers the USES same as 5 sheets of Masonite (10 / 100ft roll) Protects Granite, Travertine, Marble, Terrazzo, Stone, Colored Concrete, • Reusable for anyone looking for the same Tile, , Carpet, Linoleum, etc. Excellent protection for floors, walls, trusted protection of Builder Board™ in a smaller, lighter roll counter tops, cabinets and more.

ECO-FRIENDLY SAFETY • 100 percent recyclable Upon review of relevant OSHA regulations and the characteristics of • Can be rolled up and reused paperboard, an SDS is not required because paperboard falls within the • consumer material exemptions for a “manufactured article” and “wood products.” • Contributes points to LEED Certified projects

The information in this document was obtained from sources which we believe reliable. The information is provided without any warranty expressed or implied regarding its correctness. We do not assume responsibility for loss, damage or expense in any way connected with the handling, storage, use or disposal of the product. *Testing conducted by independent commission and not Made in USA affiliated with the National Fire Protection Association unless other specified. 7102.50