DOCSLIB.ORG

Raspberry Pi (1).Xlsx

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Raspberry Pi (1).Xlsx Single-board computer Raspberry Pi 4 Raspberry Pi 3 B+ Raspberry Pi Zero Orange PI 3 Banana Pi BeagleBone Black BeagleBone A20‐OLinuXino‐LIME Onion Omega2 LTE Image HAT compatible Yes Yes Yes No No Height 3.37 in (85.6 mm) 3.37 in (85.6 mm) 1.18 in (30 mm) 3.68 in (93.5 mm) 2.36 in (60 mm) 2.15 in 2.15 in 84 mn 80 mm Width 2.22 in (56.5 mm) 2.22 in (56.5 mm) 2.55 in (65 mm) 2.36 in (60 mm) 3.62 in (92 mm) 3.4 in 3.4 in 60 mn 50 mm Weight 1.58 oz (45 g) 0.31746 oz (9 g) 2.64 oz (75 g) 1.69 oz (48 g) 1.4 oz 1.4 oz Price US$35.00 US$35.00 US$5.00 US$35.00 US$45.00 US$89.00 (Digikey) 33 $99 Technical details CPU 1.5GHz Quad core Cortex‐ 1.4GHz 64‐bit quad‐core 1 GHz Low Power Allwinner H6 SoC quad‐ 1 GHz ARM Cortex‐A7 Allwinner A20 dual 580 MHz MIPS A72 (ARM v8) 64‐bit ARMv8 ARM1176JZ‐F core 64bit 1.8Ghz dual‐core core Cortex‐A7 GPU VideoCore VI OpenGL ES 3.x VideoCore IV Dual Core VideoCore Mali T720 ARM Mali‐400 MP2 GPU dual‐core Mali 400 IV® Multimedia Co‐ dual‐core GPU Processor RAM 1 GB , 2 GB, 4 GB 1 GB DDR2 512 MB 2 GB ‐ 1 GB 1 GB 512 MB DDR3L‐800 256 MB 512 MB (DDR3) 128 MB 4K compatible Yes No No Yes No Onboard storage 8 GB EMMC (optional) 32 MB Flash + microSD slot Flash storage types Ethernet (LAN, RJ45) Yes 10/100/1000 Yes 10/100/1000 ‐ via USB Yes 10/100/1000 Yes 10/100/1000 Yes no USB Yes 2x USB3.0 + 2x USB2.0 Yes 4x USB2.0 Yes micro + micro OTG Yes 4x USB3.0 + 1x USB2.0 Yes 2x USB2.0 + micro Yes 2 USB (High-speed Yes, USB‐C port + mirco OTG OTG host with power control and current limiter) SATA Ports No No No No Yes No No Yes SATA connector with No 5V SATA power jack HDMI port Yes 2x micro HDMI Yes Yes mini Yes 2.0a Yes Yes micro Yes DVI-D Yes + LCD connector No compatible with with 4.3", 7.0", 10.1" LCD modules from Olimex Wi‐Fi Yes 2.4GHz and 5GHz 802.11 Yes 2.4GHz and 5GHz No Yes 802.11 a/b/g/n/ac No No No No 2.4 GHz b/g/n Access b/g/n/ac 802.11 b/g/n/ac Point & Client Bluetooth® Yes 5.0 Yes 4.2, BLE No Yes 5.0 No No No No No Cellular No No No No No No No No 4G LTE Cat 4 GPS No No No No No No No No GNSS Infrared port No No No Yes On / Off switch No No No Yes ‐ 3 BUTTONS with ANDROID functionality + RESET button RTC No No No No No Additional Release date 2019 Jun 24 2018 Mar 14 2015 Nov 30 2019 2014 Mar 1 2013 Apr 23 open for preorder.
Load more

Recommended publications
  • Cubietruck – Mini PC
    SPRZĘT Cubietruck – mini PC Rynek komputerków jednopłytkowych opartych o procesory ARM zapoczątkowany przez Raspberry Pi rozwija się doskonale. Może nie jak grzyby po deszczu, ale systematycznie pojawiają się nowe rozwiązania: BeagleBoard, Marsboard, Cubieboard, Olinuxino itp. Różnią się one wyposażeniem, wydajnością, dostępnością dokumentacji oraz wsparciem technicznym. Ciekawie rozwija się propozycja Cubieboard. mocujących. Niby nic, ale te trzy kawałki two- org, zapoczątkowana płytką Cubieboard A10 rzywa i paczka tulejek umożliwiają poskładanie Fotografi a 3. Obudowa Cubietruck (opisaną w EP06/2013) i Cubieboard2 zgod- samodzielnego systemu mini-PC wyposażo- ną mechanicznie, ale zbudowaną w oparciu nego w dysk HDD 2,5”, wystarczająco zabez- rolę domowego centrum multimedialnego lub o nowszy, dwurdzeniowy procesor A20, zwięk- pieczając mechanicznie jego elementy. Osłony Linuxowego komputera PC. Jedyne zastrzeżenie szający wydajność Cubie i paletę jej zastosowań w odpowiednich miejscach mają wyfrezowane można mieć do kilku różnokolorowych LED, (fotografi a 1). Najnowsza propozycja to Cubie- otwory umożliwiające korzystanie z GPIO bez bezlitośnie informujących nasze oczy o stanie truck (Cubieboard3), oparty podobnie jak Cu- zdejmowania obudowy. pracy Cubie. bieboard2 (fotografi a 2) o procesor Allwinner Ciekawą propozycją dla osób wykorzy- Cubieboard3 oparty jest o SoC w architektu- A20, lecz mający znacznie bogatsze wyposaże- stujących Cubieboard3 w roli samodzielnego rze ARM7 – Allwinner A20, który w połączeniu nie, co niestety wiąże się z wyższą ceną. Porów- mini-PC, jest pełna obudowa pokazana na fo- ze sporej wielkości dyskiem NAND Flash oraz nanie parametrów poszczególnych komputer- tografi i 3. W swoim wnętrzu mieści swobodnie zwiększoną pamięcią RAM bezproblemowo ków Cubieboard umieszczono w tabeli 1. płytkę Cubieboard3, dysk HDD 2,5” (fotogra- sprawdza się w roli komputera PC pracującego Podobnie jak w przypadku poprzednich fi a 4) i przewody połączeniowe.
    [Show full text]
  • Reverse Engineering Power Management on NVIDIA Gpus - Anatomy of an Autonomic-Ready System Martin Peres
    Reverse Engineering Power Management on NVIDIA GPUs - Anatomy of an Autonomic-ready System Martin Peres To cite this version: Martin Peres. Reverse Engineering Power Management on NVIDIA GPUs - Anatomy of an Autonomic-ready System. ECRTS, Operating Systems Platforms for Embedded Real-Time appli- cations 2013, Jul 2013, Paris, France. hal-00853849 HAL Id: hal-00853849 https://hal.archives-ouvertes.fr/hal-00853849 Submitted on 23 Aug 2013 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. Reverse engineering power management on NVIDIA GPUs - Anatomy of an autonomic-ready system Martin Peres Ph.D. student at LaBRI University of Bordeaux Hobbyist Linux/Nouveau Developer Email: [email protected] Abstract—Research in power management is currently limited supported nor documented by NVIDIA. As GPUs are leading by the fact that companies do not release enough documentation the market in terms of performance-per-Watt [3], they are or interfaces to fully exploit the potential found in modern a good candidate for a reverse engineering effort of their processors. This problem is even more present in GPUs despite power management features. The choice of reverse engineering having the highest performance-per-Watt ratio found in today’s NVIDIA’s power management features makes sense as they processors.
    [Show full text]
  • Monitoring Dan Kontrol Sistem Irigasi Berbasis Iot Menggunakan Banana Pi
    JURNAL TEKNIK ITS Vol. 7, No. 2, (2018) ISSN: 2337-3539 (2301-9271 Print) A288 Monitoring dan Kontrol Sistem Irigasi Berbasis IoT Menggunakan Banana Pi Andrie Wijaya, dan Muhammad Rivai Departemen Teknik Elektro, Fakultas Teknologi Elektro, Institut Teknologi Sepuluh Nopember (ITS) e-mail: [email protected] Abstrak— Saat ini metode pengaliran air atau irigasi dilakukan memperhatikan kondisi kelembaban tanah juga mengakibatkan secara manual. Petani harus menyiram tanaman satu persatu penggunaan air yang tidak tepat. Penggunaan air yang sehingga tidak efisien dalam hal energi, waktu, dan ketersediaan berlebihan akan mempengaruhi ketersediaan sumber air yang air sehingga dapat menurukan hasil panen. Internet of Things semakin menurun. merupakan konsep dan metode untuk kontrol jarak jauh, Tugas akhir ini bertujuan untuk menciptakan sistem monitoring, pengiriman data, dan berbagai tugas lainnya. IoT terhubung dengan suatu jaringan sehingga dapat di akses di irigasi berbasis internet of things [2][3], dan [4]. Pada sistem mana saja yang dapat mempermudah berbagai hal. IoT dapat ini petani dapat memonitoring kondisi kelembaban tanah dan dimanfaatkan di berbagai bidang, salah satunya adalah bidang mengkontrol debit air yang akan disiram pada tanaman pertanian. Pada bidang ini IoT dapat digunakan untuk memantau Sehingga meningkatkan hasil panen dan mengoptimalkan dan mengatur berbagai hal untuk menunjang pertanian. Pada penggunaan air. penelitian ini akan dibuat suatu peralatan yang digunakan untuk Sistem ini menggunakan sensor kelembaban tanah atau monitoring dan kontrol sistem irigasi berbasis IOT. Single Board higrometer [5][6]yang akan di proses di Single Board Computer Banana Pi digunakan sebagai prosesor utama yang Computer (SBC) Banana Pi [7]. SBC yang terhubung dengan terhubung dengan jaringan internet yang mengirim data dari sensor ke pengguna.
    [Show full text]
  • Alberta Government Services ______Corporate Registry ______
    Alberta Government Services ____________________ Corporate Registry ____________________ Registrar’s Periodical REGISTRAR’S PERIODICAL, SEPTEMBER 15, 2006 ALBERTA GOVERNMENT SERVICES Corporate Registrations, Incorporations, and Continuations (Business Corporations Act, Cemetery Companies Act, Companies Act, Cooperatives Act, Credit Union Act, Loan and Trust Corporations Act, Religious Societies’ Land Act, Rural Utilities Act, Societies Act, Partnership Act) 0751152 B.C. LTD. Other Prov/Territory Corps 1256866 ALBERTA LTD. Numbered Alberta Registered 2006 AUG 11 Registered Address: 600, Corporation Incorporated 2006 AUG 14 Registered 12220 STONY PLAIN ROAD, EDMONTON Address: 314 CARMICHAEL WYND, EDMONTON ALBERTA, T5N 3Y4. No: 2112610379. ALBERTA, T6R 2K6. No: 2012568669. 101026957 SASKATCHEWAN LTD. Other 1256869 ALBERTA LTD. Numbered Alberta Prov/Territory Corps Registered 2006 AUG 15 Corporation Incorporated 2006 AUG 03 Registered Registered Address: SUITE 300, 255 - 17 AVE SW, Address: BOX #8, 125 8170 50 ST NW, EDMONTON CALGARY ALBERTA, T2S 2T8. No: 2112616210. ALBERTA, T6B 1E6. No: 2012568693. 101075855 SASKATCHEWAN LTD. Other 1257443 ALBERTA LTD. Numbered Alberta Prov/Territory Corps Registered 2006 AUG 15 Corporation Incorporated 2006 AUG 15 Registered Registered Address: 5105 - 49 STREET, Address: 1314 RIVERDALE AVENUE SW, LLOYDMINSTER ALBERTA, T9V 0K3. No: CALGARY ALBERTA, T2S 0Y8. No: 2012574436. 2112617788. 1258360 ALBERTA LTD. Numbered Alberta 101086914 SASKATCHEWAN LTD. Other Corporation Incorporated 2006 AUG 01 Registered Prov/Territory Corps Registered 2006 AUG 10 Address: 303-9811 34 AVE, EDMONTON ALBERTA, Registered Address: 176 STRATTEN WAY SE, T6E 5X9. No: 2012583601. MEDICINE HAT ALBERTA, T1B 3R3. No: 2112605619. 1258478 ALBERTA LTD. Numbered Alberta Corporation Incorporated 2006 AUG 01 Registered 10K CONSULTING LTD. Named Alberta Corporation Address: 282 TUSCANY VALLEY VIEW NW, Incorporated 2006 AUG 04 Registered Address: 2529-7 CALGARY ALBERTA, T3L 2K8.
    [Show full text]
  • GPU Developments 2018
    GPU Developments 2018 2018 GPU Developments 2018 © Copyright Jon Peddie Research 2019. All rights reserved. Reproduction in whole or in part is prohibited without written permission from Jon Peddie Research. This report is the property of Jon Peddie Research (JPR) and made available to a restricted number of clients only upon these terms and conditions. Agreement not to copy or disclose. This report and all future reports or other materials provided by JPR pursuant to this subscription (collectively, “Reports”) are protected by: (i) federal copyright, pursuant to the Copyright Act of 1976; and (ii) the nondisclosure provisions set forth immediately following. License, exclusive use, and agreement not to disclose. Reports are the trade secret property exclusively of JPR and are made available to a restricted number of clients, for their exclusive use and only upon the following terms and conditions. JPR grants site-wide license to read and utilize the information in the Reports, exclusively to the initial subscriber to the Reports, its subsidiaries, divisions, and employees (collectively, “Subscriber”). The Reports shall, at all times, be treated by Subscriber as proprietary and confidential documents, for internal use only. Subscriber agrees that it will not reproduce for or share any of the material in the Reports (“Material”) with any entity or individual other than Subscriber (“Shared Third Party”) (collectively, “Share” or “Sharing”), without the advance written permission of JPR. Subscriber shall be liable for any breach of this agreement and shall be subject to cancellation of its subscription to Reports. Without limiting this liability, Subscriber shall be liable for any damages suffered by JPR as a result of any Sharing of any Material, without advance written permission of JPR.
    [Show full text]
  • Mali-400 MP: a Scalable GPU for Mobile Devices
    Mali-400 MP: A Scalable GPU for Mobile Devices Tom Olson Director, Graphics Research, ARM Outline . ARM and Mobile Graphics . Design Constraints for Mobile GPUs . Mali Architecture Overview . Multicore Scaling in Mali-400 MP . Results 2 About ARM . World’s leading supplier of semiconductor IP . Processor Architectures and Implementations . Related IP: buses, caches, debug & trace, physical IP . Software tools and infrastructure . Business Model . License fees . Per-chip royalties . Graphics at ARM . Acquired Falanx in 2006 . ARM Mali is now the world’s most widely licensed GPU family 3 Challenges for Mobile GPUs . Size . Power . Memory Bandwidth 4 More Challenges . Graphics is going into “anything that has a screen” . Mobile . Navigation . Set Top Box/DTV . Automotive . Video telephony . Cameras . Printers . Huge range of form factors, screen sizes, power budgets, and performance requirements . In some applications, a huge difference between peak and average performance requirements 5 Solution: Scalability . Address a wide variety of performance points and applications with a single IP and a single software stack. Need static scalability to adapt to different peak requirements in different platforms / markets . Need dynamic scalability to reduce power when peak performance isn’t needed 6 Options for Scalability . Fine-grained: Multiple pipes, wide SIMD, etc . Proven approach, efficient and effective . But, adding pipes / lanes is invasive . Hard for IP licensees to do on their own . And, hard to partition to provide dynamic scalability . Coarse-grained: Multicore . Easy for licensees to select desired performance . Putting cores on separate power islands allows dynamic scaling 7 Mali 400-MP Top Level Architecture Asynch Mali-400 MP Top-Level APB Geometry Pixel Processor Pixel Processor Pixel Processor Pixel Processor Processor #1 #2 #3 #4 CLKs MaliMMUs RESETs IRQs IDLEs MaliL2 AXI .
    [Show full text]
  • Intel Desktop Board DG41MJ Product Guide
    Intel® Desktop Board DG41MJ Product Guide Order Number: E59138-001 Revision History Revision Revision History Date -001 First release of the Intel® Desktop Board DG41MJ Product Guide February 2009 If an FCC declaration of conformity marking is present on the board, the following statement applies: FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions related to the EMC performance of this product, contact: Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124 1-800-628-8686 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment to an outlet on a circuit other than the one to which the receiver is connected.
    [Show full text]
  • User Manual - S.USV Solutions Compatible with Raspberry Pi, up Board and Tinker Board Revision 2.2 | Date 07.06.2018
    User Manual - S.USV solutions Compatible with Raspberry Pi, UP Board and Tinker Board Revision 2.2 | Date 07.06.2018 User Manual - S.USV solutions / Revision 2.0 Table of Contents 1 Functions .............................................................................................................................................. 3 2 Technical Specification ........................................................................................................................ 4 2.1 Overview ....................................................................................................................................... 5 2.2 Performance .................................................................................................................................. 6 2.3 Lighting Indicators ......................................................................................................................... 6 3 Installation Guide................................................................................................................................. 7 3.1 Hardware ...................................................................................................................................... 7 3.1.1 Commissioning S.USV ............................................................................................................ 7 3.1.2 Connecting the battery .......................................................................................................... 8 3.1.3 Connecting the external power supply .................................................................................
    [Show full text]
  • Building a Distribution: Openharmony and Openmandriva
    Two different approaches to building a distribution: OpenHarmony and OpenMandriva Bernhard "bero" Rosenkränzer <[email protected]> FOSDEM 2021 -- February 6, 2021 1 MY CONTACT: [email protected], [email protected] Way more important than that, he also feeds LINKEDIN: dogs. https://www.linkedin.com/in/berolinux/ Bernhard "bero" Rosenkränzer I don't usually do "About Me", but since it may be relevant to the topic: Principal Technologist at Open Source Technology Center since November 2020 President of the OpenMandriva Association, Contributor since 2012 - also a contributor to Mandrake back in 1998/1999 2 What is OpenHarmony? ● More than an operating system: Can use multiple different kernels (Linux, Zephyr, ...) ● Key goal: autonomous, cooperative devices -- multiple devices form a distributed virtual bus and can share resources ● Initial target devices: Avenger 96 (32-bit ARMv7 Cortex-A7+-M4), Nitrogen 96 (Cortex-M4) ● Built with OpenEmbedded/Yocto - one command builds the entire OS ● Fully open, developed as an Open Source project instead of an inhouse product from the start. ● For more information, visit Stefan Schmidt's talk in the Embedded devroom, 17.30 and/or talk to us at the Huawei OSTC stand. 3 What is OpenMandriva? ● A more traditional Linux distribution - controlled by the community, continuing where Mandriva left off after the company behind it went out of business in 2012. Its roots go back to the first Mandrake Linux release in 1998. ● Originally targeting only x86 PCs - Support for additional architectures (aarch64, armv7hnl, RISC-V) added later ● Repositiories contain 17618 packages, built and updated individually, assembled into an installable product with omdv-build-iso or os-image-builder.
    [Show full text]
  • Jumpstarting the Onion Omega2
    Jumpstarting the Onion Omega2 An Introduction to a New Low-Cost Internet of Things Computer WOLFRAM DONAT JUMPSTARTING the Onion Omega2 AN INTRODUCTION TO A NEW LOW-COST INTERNET OF THINGS COMPUTER Wolfram Donat Maker Media, Inc. San Francisco Copyright © 2018 Wolfram Donat. All rights reserved. Published by Maker Media, Inc. 1700 Montgomery Street, Suite 240 San Francisco, CA 94111 Maker Media books may be purchased for educational, business, or sales promotional use. Online editions are also available for most titles (safari- booksonline.com). For more information, contact our corporate/institutional sales department: 800-998-9938 or [email protected]. Editorial Director: Roger Stewart Editor: Patrick DiJusto Copy Editor: Elizabeth Welch, Happenstance Type-O-Rama Proofreader: Scout Festa, Happenstance Type-O-Rama Cover and Interior Designer: Maureen Forys, Happenstance Type-O-Rama All the circuit and component diagrams in this book are created using Fritz- ing (http://fritzing.org/home). June 2018: First Edition Revision History for the First Edition 2018-06-18 First Release See oreilly.com/catalog/errata.csp?isbn=9781680455229 for release details. Make:, Maker Shed, and Maker Faire are registered trademarks of Maker Media, Inc. The Maker Media logo is a trademark of Maker Media, Inc. Jumpstarting the Onion Omega2 and related trade dress are trademarks of Maker Media, Inc. Many of the designations used by manufacturers and sellers to distinguish their products are claimed as trademarks. Where those designations appear in this book, and Maker Media, Inc. was aware of a trademark claim, the designations have been printed in caps or initial caps. While the publisher and the author have used good faith efforts to ensure that the information and instructions contained in this work are accurate, the publisher and the author disclaim all responsibility for errors or omis- sions, including without limitation responsibility for damages resulting from the use of or reliance on this work.
    [Show full text]
  • A Low-Cost Deep Neural Network-Based Autonomous Car
    DeepPicar: A Low-cost Deep Neural Network-based Autonomous Car Michael G. Bechtely, Elise McEllhineyy, Minje Kim?, Heechul Yuny y University of Kansas, USA. fmbechtel, elisemmc, [email protected] ? Indiana University, USA. [email protected] Abstract—We present DeepPicar, a low-cost deep neural net- task may be directly linked to the safety of the vehicle. This work based autonomous car platform. DeepPicar is a small scale requires a high computing capacity as well as the means to replication of a real self-driving car called DAVE-2 by NVIDIA. guaranteeing the timings. On the other hand, the computing DAVE-2 uses a deep convolutional neural network (CNN), which takes images from a front-facing camera as input and produces hardware platform must also satisfy cost, size, weight, and car steering angles as output. DeepPicar uses the same net- power constraints, which require a highly efficient computing work architecture—9 layers, 27 million connections and 250K platform. These two conflicting requirements complicate the parameters—and can drive itself in real-time using a web camera platform selection process as observed in [25]. and a Raspberry Pi 3 quad-core platform. Using DeepPicar, we To understand what kind of computing hardware is needed analyze the Pi 3’s computing capabilities to support end-to-end deep learning based real-time control of autonomous vehicles. for AI workloads, we need a testbed and realistic workloads. We also systematically compare other contemporary embedded While using a real car-based testbed would be most ideal, it computing platforms using the DeepPicar’s CNN-based real-time is not only highly expensive, but also poses serious safety control workload.
    [Show full text]
  • GMAI: a GPU Memory Allocation Inspection Tool for Understanding and Exploiting the Internals of GPU Resource Allocation in Critical Systems
    The final publication is available at ACM via http://dx.doi.org/ 10.1145/3391896 GMAI: A GPU Memory Allocation Inspection Tool for Understanding and Exploiting the Internals of GPU Resource Allocation in Critical Systems ALEJANDRO J. CALDERÓN, Universitat Politècnica de Catalunya & Ikerlan Technology Research Centre LEONIDAS KOSMIDIS, Barcelona Supercomputing Center (BSC) CARLOS F. NICOLÁS, Ikerlan Technology Research Centre FRANCISCO J. CAZORLA, Barcelona Supercomputing Center (BSC) PEIO ONAINDIA, Ikerlan Technology Research Centre Critical real-time systems require strict resource provisioning in terms of memory and timing. The constant need for higher performance in these systems has led industry to recently include GPUs. However, GPU software ecosystems are by their nature closed source, forcing system engineers to consider them as black boxes, complicating resource provisioning. In this work we reverse engineer the internal operations of the GPU system software to increase the understanding of their observed behaviour and how resources are internally managed. We present our methodology which is incorporated in GMAI (GPU Memory Allocation Inspector), a tool which allows system engineers to accurately determine the exact amount of resources required by their critical systems, avoiding underprovisioning. We first apply our methodology on a wide range of GPU hardware from different vendors showing itsgeneralityin obtaining the properties of the GPU memory allocators. Next, we demonstrate the benefits of such knowledge in resource provisioning of two case studies from the automotive domain, where the actual memory consumption is up to 5.6× more than the memory requested by the application. ACM Reference Format: Alejandro J. Calderón, Leonidas Kosmidis, Carlos F. Nicolás, Francisco J.
    [Show full text]