TPI Revised Cat 26/1/04 12:58 PM Page 1
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Universal Smartphone and Tablet Flex Mount
MOBILE ACCESSORIES Universal Mobile Device Stands AFM01F_ Product Datasheet Universal Smartphone and Tablet Flex Mount Watch your smartphone or tablet hands free! For use in the kitchen, office, on the sofa or in bed. AFM01F_ Product Datasheet Overview: Features: Aluratek’s Universal Smartphone and Tablet Flex Mount • Compatible with most smartphones and tablets between allows you to enjoy a completely hands free experience with 4.75 to 9 inches in width virtually unlimited mounting possibilities. The mount features • Long flexible arm provides virtually unlimited a built-in surface clamp and 360 degree rotating device positioning possibilities cradle. The flex mount’s carefully placed rubber padding • Device cradle rotates 360 degrees for landscape or offers scratch free protection for your device and furniture. portrait viewing • Clamp adjusts from 0 - 3” allowing you to securely clamp on a bed frame, bedside, headboard, nightstand, desk, end table, kitchen counter etc. • Non-slip silicone pads protect your device and furniture from scratches • Limited 1 Year Warranty Highly Flexible The long flexible arm provides virtually unlimited positioning possibilities. Watch your smartphone or tablet hands free! AFM01F_ Product Datasheet Universal Compatibility Works with mobile devices ranging from 4.75 to 9 inches in width. The non-slip grips guarantees a safe hold on your devices. Use the lace handles to easily pull-out the retractable arms so your mobile device can securely rest between the grips. 360° Cradle Rotation Device cradle rotates 360 degrees for landscape or portrait viewing. For use in the kitchen, office, on the sofa or in bed. Adjustable Base Clamp Clamp adjusts from 0 - 3” allowing you to securely clamp on a bed frame, bedside, headboard, nightstand, desk, end table, kitchen counter etc. -
Full Electric
INVACARE® FULL-ELECTRIC BED The Invacare® Full-Electric Bed offers the greatest convenience for the patient and caregiver. The easy-to use pendant control provides motorized positioning of the upper body and knees, and also adjusts bed frame height for efficient use of accessories and for safe and easy transfer. Invacare beds, mattresses and rails, excluding therapeutic support surfaces and bariatric beds, when used as a system and sold new after August 1, 2007, meet the voluntary FDA Guidelines for bed rail entrapment. Visit www.invacare.com/ bedsafety for additional safety and entrapment information. Features High impact bed end panels are more Motor system with waterproof Ergonomic hand pendant comes with durable, impact and scratch resistant; enclosures is rated IP66. Washable durable strain relief and heavy-duty washable for easy cleaning with standard water pressure. The bed cord. Waterproof casing for easy Universal bed ends can be used as must not be power washed cleaning, conveniently attaches to either the headboard or footboard on Color-coded connections on junction bed sheet with clip or rail with hand the bed box for easier maintenance pendant cradle (sold separately) Rubber caster tread for better tracking Double-insulated junction box provides Hand pendant cradle available for with non-marring material extra protection against electrical shock convenient storage of hand pendant model # 26975 DC low voltage, compact motor system Quiet motor operation and fast cycle Interchangeability simplifies storage, time on lowering height of bed for reduces inventory complexity efficient bed set-up HCPCS Code: E0297 1 2 3 4 Invacare Corporation www.invacare.com 5 6 USA One Invacare Way Elyria, Ohio 44035-4190 (800) 333-6900 Canada 570 Matheson Blvd. -
Parts List Cradle
Giving parts list Cradle 1 X MATTRESS 1 X FOLDING FRAME 1 X MATTRESS SHEET 1 X ROCKING BASE 1 X FABRIC CRADLE IMPORTANT Read all instructions BEFORE assembly and USE of product KEEP INSTRUCTIONS FOR FUTURE USE IN BASE POCKET BENEATH MATTRESS. 1 X HEX KEY 4 X HEX SCREWS (DO NOT STORE IN CRADLE) 1 X MOSQUITO NET 1 Giving ASSEMBLY Cradle OPENING THE FRAME 1. Place the ROCKING BASE on a flat, 2. Take the FOLDING FRAME and open it. 3. Place the folding frame horizontal surface. onto the rocking base. ATTACHING THE FRAME 1. Line up the screw holes, #1 on the base to #1 on the 2. Use the 4 HEX SCREWS and HEX KEY 3. Frame should look like this. frame and #2 on the base to #2 on the frame. to fasten the base to the frame. 2 Giving ASSEMBLY Cradle ATTACHING FABRIC CRADLE TO FRAME 1. Wrap the FABRIC CRADLE over the corners 2. On a soft, clean surface, turn the 3. Zip the fabric cradle onto the frame 4. Return the cradle to its of the frame in the upright position, cradle upside down. from right to left on each side of the cradle. upright position. keeping the velcro at each corner. Zipping it completely will ensure baby’s safety. ADDING MATTRESS TO CRADLE 1. Fit MATTRESS SHEET over MATTRESS. 2. Place mattress into bottom of cradle, making sure it sits flat. 3 Giving Getting started Cradle GENERAL USE 1. Always place the cradle on a flat, 2. Place the baby flat on their back 3. -
Assembly Instructions
ASSEMBLY INSTRUCTIONS Adult assembly required Small parts may present choking hazard prior to assembly. Enclosed please find simple step-by-step instructions to help you quickly assemble your products. Before you begin we recommend that you following the steps below: 1. Please read the instructions thoroughly. 2. Identify all parts and hardware. 3. You will need the following tools: Philips head screw drive Flat head screw drive Hammer DO NOT use power drills or drivers To protect your parts during assembly please place them on a soft surface. To clean surface use only water on a damp cloth. DO NOT use window cleaners or cleaning abrasives as it will scratch the surface and could damage the protective coating. 1 MADE IN CHINA WARNING .Failure to follow these warnings and the assembly instructions could result in serious injury or death. .Read all instructions before assembling cradle.KEEP INSTRUCTIONS FOR FUTURE USE. .Periodically check the safety of your cradle, by making certain all scerws,nuts and bolts are tightened securely and insepect cradle for damaged hardware, loose joints,missing parts or sharp edges. DO NOT use the cradle if any parts are missing or broken. Ask your local dealer for replacement part and instruction literature if needed. DO NOT substitute parts. .When child is able to climb out unaided, the cradle should no longer be used. .DO NOT suspend items with long strings into cradle. DO NOT place cradle near a window where cords from blinds or drapes may strangle a child. DO NOT tie pacifiers, necklaces, or any other item around a chlid’s neck or on the cradle parts. -
Resource Book for Furniture Renovation, Refinishing And
DOCUMENT RESUME ED 224 910 CE 034 646 AUTHOR Barton, Diane; Robinson, Jay TITLE Resource Book forFurniture.Renovation, Refinishing and Aeupholstering. INSTITUTION Madison Area Technical Collo Wis.;Wisconsin State Board of Vocational, Asechnical, andAdult Education, Wadison. PUB DATE 82 MOTE 69p.; For related document?, see CE034 642-649. PyB,TYPE Guides - Classroom Use - Guides (ForTeachers) (052) EDRS PRICE MFOI/PC03 Plus Postale. DESCEcIPTORS Adult Proarams; Adult VocationalEducation: *Furniture; Glossaries; *Home Fbrnishings;Learning Aciivities, *Occupational-Ho" Economics; *Resource Materials IDENTIFIERS *Furniture Refini,shing; *Upholsterers This resource book for furniturerenovation (refinishing and reupholstering) is one of four resourcebooks .developed.for,use in Code 30 or adultvocational programs in the home furnishings service area.-Representative,illustrative, and book are Furniture informative materials cont4ned in the resource 4 Woods, Cuts and Matching Vdneers,'WoodJoints, Joints Used In Furniture Construction, Vocabulary ofWood, Wood Classification, Exotic Woods, Woods Physical Propertiesavd Source Chart, Chronology of Furniture Styles, Dictionaryof Upholstery Terms, Upholstery Materials and Supplies, FurnitureFabrics, Estimating Fabrics to Reupholster Vari.ous Pieces ofFurniture, Removing Old Cover, Construction Processes in Upholstery,Spring and Spring Work, Attaching Burlap, Determining Size ofTack for Job, and Installing Final Coverings. (YLB) ********************w************************************************* Reproductions -
Sofa Buying Guide
Sofa Buying Guide With limitless options available, finding the perfect sofa can feel like a huge investment. Learn more about sofa construction, sizes, fabrics, styles, and care. Choosing a new sofa is one of the most daunting furniture purchases you will make. Ideally, a sofa is one of those furniture pieces that will grow with you from one life stage to the next. With limitless options available, finding the perfect sofa can feel like a huge investment, so it is important to choose wisely when searching for the perfect sofa that will complement your lifestyle and home. Sofa Construction The biggest factor that will determine both price and quality is the way your sofa is constructed. A well-built sofa is a good investment that ensures a comfortable place to sit in, and will endure after rigorous daily use. The Frame Just like a good foundation to a house, the quality and strength of your sofa's frame material is essential to the longevity of your sofa. Kiln-Dried Hardwood Benefits: Long considered the hallmark of quality, kiln-dried hardwood will remain sturdy and strong for decades.Kiln-dried hardwood is the most durable, and will retain its shape over time and use. Good to Know: Drying hardwood (such as oak, ash, or beech) in a kiln, removes approximately 90-95% of moisture from the wood, which prevents warping and bowing. Avoid softwood even if it is kiln-dried (such as cedar, pine, or spruce). Kiln-dried hardwood frames are made from about 2-inch thick hardwood. Kiln-dried hardwood frames come with a higher price tag. -
Tri Fold Sofa Owners and Service Manual
OWNER'S ANDTri-Fold SERVICE MANUAL Sofa Rev: 08.08.2018 Tri Fold Sofa Owners and Service Manual TABLE OF CONTENTS Introduction 2 Safety Requirements 3 Operation Instructions 3 Preparation 4 Tools Required 4 Back Cushion Replacement Instructions 4 Full Cushion Assembly 4 Cushion Foam 4 Cushion Cover 4 Stationary Back Replacement Instructions 5 Full Stationary Back Assembly 5 Stationary Back Interior Foam 5 Stationary Back Interior Frame 5 Stationary Back Cover 5 Couch Seat Replacement Instructions 6 Couch Seat Assembly 6 Couch Seat Interior Foam 6 Couch Seat Interior Frame 6 Couch Seat Cover 6 Couch Seat Legs 6 Middle Seat Replacement Instructions 6 Middle Seat Assembly 7 Middle Seat Interior Foam 7 Middle Seat Interior Frame 7 Middle Seat Cover 7 V2 Frame Replacement Instructions 7 Front Kick Rail Replacement Instructions 8 Rear Kick Rail Replacement Instructions 8 Arm Insert Replacement Instructions 9 Foot Assembly Replacement Instructions 9 Care and Cleaning 9 Maintenance 9 Warranty 9 Introduction Our one-piece, steel frame Tri-Fold Sofa requires no spare mattress to store. In just four simple steps, it transforms into a comfortable bed. Traditional hide-a-beds have uncomfortable mattresses with support bars that can make sleeping uncomfortable. Air mattress hide-a-beds eliminate the support bar issue, but can be damaged more easily and become unusable. The Tri-Fold Sofa coverts from sofa to a very supportive, high-density foam sleep surface in four simple steps. Now campers can actually look forward to sleeping on the couch! Additional information about this product can be obtained from www.lci1.com/support or by downloading the free myLCI app. -
Cataloguemarch15.Pdf
Design Connect Every nursery is personal. After all, it holds priceless treasures. So, we are thrilled to announce the debut of our online design board. You can now create and share your very own design board through all of your social media channels and emails. It’s a wonderful way to include everyone in this amazing journey. Log on to brattdecor.com to get started. Congratulations and sweet dreams. Get inspired! Show off your dream nursery and see what’s new at Bratt. We want to hear what’s going on with you. Be a part of the fun on any of our social media outlets. Join the #brattpack. pinterest.com/brattdecor facebook.com/brattdecor @bratt_decor brattdecor.com/design_board.cfm brattdecor.com/nurseries.cfm @brattdecor chelsea distressed black chelsea lifetime crib: $1159 chelsea dresser: $1339 | chelsea changing tray: $159 | chelsea armoire: $1839 | radiance rug: $1210 | covington crib bumper: $190 | covington crib sheet: $60 covington crib skirt: $170 | elliot chandelier: $608 | st. regis glider: $1592 | st. regis ottoman: $552 royal mirror: $276 4 brattdecor.com casablanca gold casablanca crib (opposite): $699 | jar lantern: $646 | sunburst mirror: $278 hudson mirror: $682 | casablanca daybed kit: $209 brattdecor.com 7 joy distressed white joy crib: $599 | classic double changer: $899 | radiance rug: $1210 | winchester chandelier: $446 | newport glider: $598 newport ottoman: $240 | sydney crib rail: $180 | sydney crib sheet: $62 | sydney crib skirt: $230 sydney decorative pillow: $65 sydney curtain set (2 panels): $210 8 brattdecor.com -
Guide to the Simmons Company Records
Guide to the Simmons Company Records NMAH.AC.0731 Jennifer Snyder September 2002 Archives Center, National Museum of American History P.O. Box 37012 Suite 1100, MRC 601 Washington, D.C. 20013-7012 [email protected] http://americanhistory.si.edu/archives Table of Contents Collection Overview ........................................................................................................ 1 Administrative Information .............................................................................................. 1 Biographical / Historical.................................................................................................... 2 Arrangement..................................................................................................................... 4 Scope and Contents........................................................................................................ 4 Names and Subjects ...................................................................................................... 4 Container Listing ............................................................................................................. 5 Series 1: Corporate Materials, 1892-2000, undated................................................ 5 Series 2: Marketing, 1896-1990s, undated............................................................ 34 The Simmons Company Records NMAH.AC.0731 Collection Overview Repository: Archives Center, National Museum of American History Title: The Simmons Company Records Identifier: NMAH.AC.0731 Date: -
Bioclinic Positioners and Surfaces Catalog
BioClinic Positioners and Surfaces Catalog transforming wound management BioClinic Program Offering Since 1976, BioClinic has been a leader in design of innovative, quality mattresses, overlays and positioners for patients in all care settings. Our diverse foam product line truly offers something for every patient and is supported by the long- respected Joerns Healthcare name. At Joerns Healthcare we can think of no better way of supporting our customers than by staying focused on the philosophy that built our business: to re-define the environment in which care is delivered. This catalog displays the entire BioClinic line from positioners to cushions to therapeutic support surfaces. You will find that all our BioClinic products are latex free and have options to meet required safety and fire standards. This year, we are proud to announce the launch of our new BioClinic surfaces featuring three tiers of quality foam mattresses, encompassing the needs of any buyer. Combining quick shipment, industry-leading depth of offering and our widely-acclaimed customer service, you will find that Joerns Healthcare is a partner you can rely on. We understand that today’s marketplace is more competitive than ever before. As our partner, you will have access to some of the industry’s best foam products, and you may also see added value in your bottom line. We offer what you need, at a competitive price. We stay competitive to keep you competitive. And in today’s marketplace, that is a partnership designed for success. 2 • BioClinic Positioners and Surfaces -
Ergo Products
PRODUCT CATALOGUE ERGONOMIC AND ORTHOPAEDIC SOLUTIONS RECOUP Neuromusculoskeletal Rehabilitation Centre 312, 10th Block, 80 Feet Road, Further Extension of Anjanapura Layout, Lal Bahadur Shastri Nagar, Bengaluru - 560108 E: [email protected] M: +91-9845155449 W: www.recoup.in Important Note • Price List is provided at the end of the catalogue • The contents are for information only and are not a substitute for medical treatment. • All prices are exclusive of taxes. GST @ 18% shall be additional. • Delivery charges extra applicable as per location. • Products can be returned only if there is a manufacturing defect. Product Categories Sit-Stand Workstations Keyboard Trays Sit-Stand Convertor on Existing Desks Chairs Ergonomic Monitor Arms Adjustable Laptop Stands Ergonomic Footrests Orthopaedic Support Products Sit Stand Workstations Pneumatic Sit-Stand Workstation Material MDF & PVC, Steel, Aluminium, Plastic Dimensions 710x524x700~1090mm Worksurface Size(LxW) 710x500mm Worksurface Thickness 5mm Weight Capacity 8kg Code: DE-002 Height Range 700~1090mm Sit-Stand Workstation with Footrest Material: Particle Board & Melamine, Steel Dimensions: 708x592x(770-1200)mm Worksurface Size(LxW): 708x464mm Worksurface Thickness: 18mm Worksurface Weight Capacity: 8kg Height Range: 770~1200mm Code: DE-003 Features SIT-STAND LAPTOP CART: This workstation helps you eliminate sedentary work habits, relieve pressure on your back, and reduce strain on the neck, back and shoulders. Use it as a laptop desk while sitting on the couch or as a standing desk in the office. PORTABLE AND VERSATILE: Elegant design with premium Aluminum components. This mobile sit-stand desk can replace your conventional desk or a smaller laptop cart. Its top surface measures 31.5 inches wide to support laptops and a tablet. -
Canadian English: a Linguistic Reader
Occasional Papers Number 6 Strathy Language Unit Queen’s University Kingston, Ontario Canadian English: A Linguistic Reader Edited by Elaine Gold and Janice McAlpine Occasional Papers Number 6 Strathy Language Unit Queen’s University Kingston, Ontario Canadian English: A Linguistic Reader Edited by Elaine Gold and Janice McAlpine © 2010 Individual authors and artists retain copyright. Strathy Language Unit F406 Mackintosh-Corry Hall Queen’s University Kingston ON Canada K7L 3N6 Acknowledgments to Jack Chambers, who spearheaded the sociolinguistic study of Canadian English, and to Margery Fee, who ranges intrepidly across the literary/linguistic divide in Canadian Studies. This book had its beginnings in the course readers that Elaine Gold compiled while teaching Canadian English at the University of Toronto and Queen’s University from 1999 to 2006. Some texts gathered in this collection have been previously published. These are included here with the permission of the authors; original publication information appears in a footnote on the first page of each such article or excerpt. Credit for sketched illustrations: Connie Morris Photo credits: See details at each image Contents Foreword v A Note on Printing and Sharing This Book v Part One: Overview and General Characteristics of Canadian English English in Canada, J.K. Chambers 1 The Name Canada: An Etymological Enigma, 38 Mark M. Orkin Canadian English (1857), 44 Rev. A. Constable Geikie Canadian English: A Preface to the Dictionary 55 of Canadian English (1967), Walter S. Avis The