Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
lista mensal . fevereiro 2014
A presente publicação tem por objetivo:
- A divulgação das Normas Portuguesas recentemente editadas e anuladas, bem como das Normas Europeias adotadas como Normas Portuguesas, e das Normas Europeias e Internacionais publicadas e já disponíveis.
- A divulgação pública dos projetos de Normas Portuguesas, Europeias e Internacionais, com vista à obtenção durante o período de inquérito público dos pontos de vista e contribuições nacionais que possam ser considerados na sequente elaboração, aprovação e homologação das Normas.
- A divulgação de propostas de novos trabalhos de normalização europeia e internacional, para que se possa obter, durante o período de inquérito público, os pontos de vista e as contribuições nacionais.
- A divulgação da edição e anulação de outros documentos normativos.
ÍNDICE 1. Normas Portuguesas 1.1 Normas Portuguesas publicadas …………………………………………………………………………. 3 1.2 Normas Portuguesas anuladas …………………………………………………………………………… 6 1.3 Normas Portuguesas em re-exame ……………………………………………………………………… 8 1.4 Normas Europeias adotadas ……………………………………………………………………………… 9 2. Normas Europeias Publicadas 2.1 CEN …………………………………………………………………………………………………………….. 13 2.2 CENELEC ………………………………………………………………………………………………………. 15 2.3 CEN/CENELEC ……………………………………………………………………………………………….. 17 2.4 ETSI ……………………………………………………………………………………………………………… 18 3. Normas Internacionais publicadas IEC …………………………………………………………………………………………………………………… 19 ISO …………………………………………………………………………………………………………………... 22 4. Projetos de normas portuguesas 4.1 Projetos em inquérito público …………………………………………………………………………….. 23 4.2 Projetos anulados ………………………………………………………………………………………….… 24 5. Projetos de normas e propostas de estudo de novas normas do Comité Europeu de Normalização(CEN e do Comité Europeu para a Normalização do Ferro e do Aço (ECISS) 5.1 Projetos em inquérito público …………………………………………………………………………..… 25 5.2 Questionários preliminares ……………………………………………………………………………….… 47 5.3 Comités Técnicos do CEN …………………………………………………………………………………. 48
Rua António Gião, 2 2829-513 CAPARICA Mod-DNOR-01-08_01 Tel +351 212 948 100 Fax +351 212 948 223 www.ipq.pt
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
ÍNDICE (cont.) 6. Projetos de normas e propostas de estudo de novas normas do Comité Europeu de Normalização Electrotécnica (CENELEC) 6.1 Projetos em inquérito público …………………………………………………………………………… 52 6.2 Propostas de anulação de Normas ………………………………………………………….………... 61 6.3 Proposta de estudo de novas normas - "Vilamoura Procedures" …………….……………….…. 62 6.4 Questionários preliminares …………………………………………………………….……………….… 63 7. Projetos de Normas e Propostas de Estudo de Novas Normas do Comité Europeu de Normalização (CEN) / Comité Europeu de Normalização Electrotécnica (CENELEC) 7.1 Projetos em inquérito público …………………………………………………………………………… 64 8. Projetos de normas do Instituto Europeu de Normalização para as Telecomunicações (ETSI) 8.1 Projetos em inquérito público …………………………………………………………………………… 65 8.2 Propostas de anulação de Normas ……………………………………………………………………. 67 9. Projetos de normas e propostas de estudo de novas Normas de Organização Internacional de Normalização (ISO) 9.1 Projetos em inquérito público …………………………………………………………………………… 68 9.2 Comités Técnicos da ISO ……………………………………………………………………….………... 84 10. Projetos de normas e propostas de estudo de novas normas da Comissão Electrotécnica Internacional (IEC) 10.1 Projetos em inquérito público ………………………………………………………………………….. 87 11. Projetos de normas da Organização Internacional de Normalização (ISO)/Comissão Eletrotécnica Internacional (IEC) 11.1 Projetos em inquérito público …………………………………………………………………….……. 95 12. Edição e anulação de outros documentos Normativos …………………………………………………………………………………………….… 96
Rua António Gião, 2 2829-513 CAPARICA Mod-DNOR-01-08_01 Tel +351 212 948 100 Fax +351 212 948 223 www.ipq.pt
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos
1. Normas Portuguesas
1.1 Normas Portuguesas publicadas
Para cada referência, menciona-se a designação codificada (prefixos NP, NP EN, NP EN ISO, NP ISO, NP IEC, NP ISO/IEC, NP EN ISO/IEC, NP HD ou NP ENV, número, parte e data), o preço, o título e a correspondência a documentos europeus e/ou internacionais, quando existam, o número do Termo de Homologação e a respectiva data. As Normas Portuguesas referenciadas entram em vigor no dia seguinte ao da edição desta Lista Mensal.
C90 / CT 9 (ISO 887:2000 + Cor 1:2006) NP EN 22339:2013 ( 1ª Edição ) Preço: 7,00 EUR EN ISO 887:2000 IDT;EN ISO 887:2000 /AC :2006 IDT Pinos cónicos, não endurecidos Termo de Homologação nº 2013/0357, 2013-12-19 (ISO 2339:1986) EN 22339:1992 IDT C90 / CT 9 Termo de Homologação nº 2013/0350, 2013-12-19 NP EN ISO 8744:2013 ( 1ª Edição ) Preço: 10,50 EUR Pinos estriados Estrias progressivas em todo o comprimento C90 / CT 9 (ISO 8744:1997) NP EN 22340:2013 ( 1ª Edição ) Preço: 7,00 EUR EN ISO 8744:1997 IDT Pinos de articulação sem cabeça Termo de Homologação nº 2013/0346, 2013-12-12 (ISO 2340:1986) EN 22340:1992 IDT C90 / CT 9 Termo de Homologação nº 2013/0351, 2013-12-19 NP EN ISO 8745:2013 ( 1ª Edição ) Preço: 10,50 EUR Pinos estriados Estrias progressivas em metade do comprimento C90 / CT 9 (ISO 8745:1997) NP EN 22341:2013 ( 1ª Edição ) Preço: 7,00 EUR EN ISO 8745:1997 IDT Pinos de articulação com cabeça Termo de Homologação nº 2013/0347, 2013-12-12 (ISO 2341:1986) EN 22341:1992 IDT C90 / CT 9 Termo de Homologação nº 2013/0352, 2013-12-19 NP EN ISO 8746:2013 ( 1ª Edição ) Preço: 10,50 EUR Pinos estriados com cabeça esférica C90 / CT 9 (ISO 8746:1997) NP EN 28736:2013 ( 1ª Edição ) Preço: 7,00 EUR EN ISO 8746:1997 IDT Pinos cónicos com furo roscado, não endurecidos Termo de Homologação nº 2013/0359, 2013-12-19 (ISO 8736:1986) EN 28736:1992 IDT C90 / CT 9 Termo de Homologação nº 2013/0353, 2013-12-19 NP EN ISO 8747:2013 ( 1ª Edição ) Preço: 10,50 EUR Pinos estriados com cabeça de embeber C90 / CT 9 (ISO 8747:1997) NP EN 28737:2014 ( 1ª Edição ) Preço: 7,00 EUR EN ISO 8747:1997 IDT Pinos cónicos com rosca exterior, não endurecidos Termo de Homologação nº 2013/0363, 2013-12-19 (ISO 8737:1986) EN 28737:1992 IDT C90 / CT 9 Termo de Homologação nº 2014/0009, 2014-01-08 NP EN ISO 8748:2013 ( 1ª Edição ) Preço: 10,50 EUR Pinos elásticos espiralados Série espessa C90 / CT 9 (ISO 8748:2007) NP EN 28738:2013 ( 1ª Edição ) Preço: 7,00 EUR EN ISO 8748:2007 IDT Anilhas planas para pinos de articulação Grau A Termo de Homologação nº 2013/0362, 2013-12-19 (ISO 8738:1986) EN 28738:1992 IDT C90 / CT 9 Termo de Homologação nº 2013/0358, 2013-12-19 NP EN ISO 8750:2013 ( 1ª Edição ) Preço: 10,50 EUR Pinos elásticos espiralados Série média C90 / CT 9 (ISO 8750:2007) NP EN 28749:2014 ( 1ª Edição ) Preço: 7,00 EUR EN ISO 8750:2007 IDT Pinos e pinos estriados Ensaio de corte Termo de Homologação nº 2013/0361, 2013-12-19 (ISO 8749:1986) EN 28749:1992 IDT C90 / CT 9 Termo de Homologação nº 2014/0010, 2014-01-08 NP EN ISO 8751:2013 ( 1ª Edição ) Preço: 10,50 EUR Pinos elásticos espiralados Série fina C90 / CT 9 (ISO 8751:2007) NP EN ISO 887:2013 ( 1ª Edição ) Preço: 10,50 EUR EN ISO 8751:2007 IDT Anilhas planas para parafusos e porcas métricos para usos gerais Termo de Homologação nº 2013/0360, 2013-12-19 Plano geral
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 3 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos C90 / CT 9 Termo de Homologação nº 2014/0016, 2014-01-21 NP EN ISO 8752:2014 ( 1ª Edição ) Preço: 10,50 EUR Pinos cilíndricos ocos, ditos pinos elásticos Série espessa C90 / CT 9 (ISO 8752:2009) NP ISO 1051:2013 ( 1ª Edição ) Preço: 3,50 EUR EN ISO 8752:2009 IDT Diâmetros da espiga de rebites Termo de Homologação nº 2014/0008, 2014-01-08 ISO 1051:2009 IDT Termo de Homologação nº 2013/0354, 2013-12-19 C90 / CT 9 NP EN ISO 10644:2013 ( 1ª Edição ) Preço: 10,50 EUR C380 / CT 38 Parafusos em aço com anilha plana cativa Anilhas das classes de NP EN 14214:2014 ( 3ª Edição ) Preço: 24,50 EUR dureza 200 HV e 300 HV Produtos petrolíferos líquidos Ésteres metílicos de ácidos gordos (ISO 10644:2009) (FAME) para utilização em motores diesel e para aquecimento EN ISO 10644:2009 IDT Especificações e métodos de ensaio Termo de Homologação nº 2013/0356, 2013-12-19 EN 14214:2012 IDT Termo de Homologação nº 2014/0020, 2014-01-27 C90 / CT 9 NP EN ISO 10673:2013 ( 1ª Edição ) Preço: 10,50 EUR C1180 / CT 118 Anilhas planas para parafusos com anilha plana cativa Séries NP EN 14066:2014 ( 2ª Edição ) Preço: 10,50 EUR estreita, normal e larga Grau A Métodos de ensaio para pedra natural Determinação da resistência (ISO 10673:2009) ao envelhecimento por choque térmico ISO 10673:2009 IDT EN 14066:2013 IDT Termo de Homologação nº 2013/0355, 2013-12-19 Termo de Homologação nº 2014/0017, 2014-01-23
C90 / CT 9 E2000 / CT 20 NP EN ISO 13337:2013 ( 1ª Edição ) Preço: 14,00 EUR NP EN 60332-3-24:2013 ( 1ª Edição ) Preço: 14,00 EUR Pinos cilíndricos ocos, ditos pinos elásticos Série fina Ensaios dos cabos elétricos e dos cabos de fibra ótica submetidos (ISO 13337:2009) ao fogo Parte 3-24: Ensaio de propagação vertical da chama, em EN ISO 13337:2009 IDT esteira, de condutores ou cabos montados verticalmente - Categoria Termo de Homologação nº 2013/0364, 2013-12-19 C (IEC 60332-3-24:2000 + A1:2008) C90 / CT 9 EN 60332-3-24:2009 IDT NP EN ISO 14588:2014 ( 1ª Edição ) Preço: 17,50 EUR Termo de Homologação nº 2013/0348, 2013-12-12 Rebites cegos Terminologia e definições (ISO 14588:2000) E2000 / CT 20 EN ISO 14588:2000 IDT NP EN 60332-3-25:2013 ( 1ª Edição ) Preço: 14,00 EUR Termo de Homologação nº 2014/0011, 2014-01-14 Ensaios dos cabos elétricos e dos cabos de fibra ótica submetidos ao fogo Parte 3-25: Ensaio de propagação vertical da chama, em C90 / CT 9 esteira, de condutores ou cabos montados verticalmente - Categoria NP EN ISO 14589:2014 ( 1ª Edição ) Preço: 17,50 EUR D Rebites cegos Ensaios mecânicos (IEC 60332-3-25:2000 + A1:2008) (ISO 14589:2000) EN 60332-3-25:2009 IDT EN ISO 14589:2000 IDT Termo de Homologação nº 2013/0349, 2013-12-12 Termo de Homologação nº 2014/0014, 2014-01-17 M029 / CT 999029 C90 / CT 9 NP EN 61558-2-5:2014 ( 2ª Edição ) Preço: 17,50 EUR NP EN ISO 15973:2014 ( 1ª Edição ) Preço: 10,50 EUR Segurança de transformadores, bobinas de indutância, blocos de Rebites cegos de extremidade fechada, com rotura da haste e alimentação e suas combinações Parte 2-5: Requisitos particulares cabeça boleada AlA/St e ensaios para transformadores para máquinas de barbear, blocos (ISO 15973:2000 de alimentação incorporando um transformador para máquinas de EN ISO 15973:2000 IDT barbear e blocos de alimentação Termo de Homologação nº 2014/0012, 2014-01-17 para máquinas de barbear (IEC 61558-2-5:2010) C90 / CT 9 EN 61558-2-5:2010 IDT NP EN ISO 15974:2014 ( 1ª Edição ) Preço: 10,50 EUR Termo de Homologação nº 2014/0001, 2014-01-08 Rebites cegos de extremidade fechada, com rotura da haste e cabeça de embeber AlA/St M029 / CT 999029 (ISO 15974:2000) NP EN 61558-2-6:2014 ( 2ª Edição ) Preço: 17,50 EUR EN ISO 15974:2000 IDT Segurança de transformadores, bobinas de indutância, blocos de Termo de Homologação nº 2014/0013, 2014-01-17 alimentação e produtos análogos para tensões de alimentação até 1100V Parte 2-6: Requisitos particulares e ensaios para C90 / CT 9 transformadores de segurança e blocos de alimentação incorporando NP EN ISO 15975:2014 ( 1ª Edição ) Preço: 10,50 EUR transformadores de segurança Rebites cegos de extremidade fechada, com rotura da haste e (IEC 61558-2-6:2009) cabeça boleada Al/AlA EN 61558-2-6:2009 IDT (ISO 15975:2002) Termo de Homologação nº 2014/0002, 2014-01-08 EN ISO 15975:2002 IDT Termo de Homologação nº 2014/0015, 2014-01-21 M029 / CT 999029 NP EN 61558-2-7:2014 ( 1ª Edição ) Preço: 17,50 EUR C90 / CT 9 Segurança de transformadores, alimentações, bobinas de indutância e NP EN ISO 15976:2014 ( 1ª Edição ) Preço: 10,50 EUR produtos análogos Parte 2-7: Requisitos particulares e ensaios para Rebites cegos de extremidade fechada, com rotura da haste e cabeça transformadores e alimentações para brinquedos boleada St/St (IEC 61558-2-7:2007, modificada) (ISO 15976:2002) EN 61558-2-7:2007 IDT EN ISO 15976:2002 IDT Termo de Homologação nº 2014/0003, 2014-01-08 Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 4 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos
M029 / CT 999029 NP EN 61558-2-12:2014 ( 2ª Edição ) Preço: 21,00 EUR Segurança de transformadores, bobinas de indutância, blocos de alimentação e suas combinações Parte 2-12: Requisitos particulares e ensaios para transformadores de tensão constante e blocos de alimentação para tensão constante (IEC 61558-2-12:2011) EN 61558-2-12:2011 IDT Termo de Homologação nº 2014/0004, 2014-01-08
M029 / CT 999029 NP EN 61558-2-15:2014 ( 2ª Edição ) Preço: 21,00 EUR Segurança de transformadores, bobinas de indutância, blocos de alimentação e suas combinações Parte 2-15: Requisitos particulares e ensaios para transformadores de separação de circuitos destinados à alimentação de locais para uso médico (IEC 61558-2-15:2011) EN 61558-2-15:2012 IDT Termo de Homologação nº 2014/0005, 2014-01-08
M029 / CT 999029 NP EN 61558-2-20:2014 ( 2ª Edição ) Preço: 17,50 EUR Segurança de transformadores, bobinas de indutância, blocos de alimentação e suas combinações Parte 2-20: Requisitos particulares e ensaios para pequenas bobinas de indutância (IEC 61558-2-20:2010) EN 61558-2-20:2011 IDT Termo de Homologação nº 2014/0006, 2014-01-08
M029 / CT 999029 NP EN 61558-2-23:2014 ( 2ª Edição ) Preço: 21,00 EUR Segurança de transformadores, bobinas de indutância, blocos de alimentação e suas combinações Parte 2-23: Requisitos particulares e ensaios para transformadores e blocos de alimentação para locais de construção (IEC 61558-2-23:2010) EN 61558-2-23:2010 IDT Termo de Homologação nº 2014/0007, 2014-01-08
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 5 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
1.2 Normas Portuguesas anuladas
Para cada referência, menciona-se a designação codificada (prefixos NP, NP EN, NP HD ou NP ENV, número, parte e data), o título, a correspondência a documentos europeus e/ou internacionais quando existam, o número do Termo de (Anulação, Homologação ou Adoção) e a respetiva data, bem como a referência do documento que a substitui. As anulações das Normas Portuguesas referenciadas tornam-se efetivas no dia seguinte ao da edição desta Lista Mensal.
C40 / CT 4 utilização na construção de estruturas de deposição de resíduos NP EN 340:2005 ( 2ª Edição ) líquidos, estações de transferência ou confinamento secundário Vestuário de protecção Requisitos gerais EN 13492:2004 /A 1:2006 IDT EN 340:2003 IDT Anulada em: 2014-01-27 Anulada em: 2014-01-27 Substituida por: EN 13492:2013 Substituida por: EN ISO 13688:2013 C40 / CT 4 C40 / CT 4 NP EN 13493:2007 ( 1ª Edição ) NP EN 13361:2006 ( 1ª Edição ) Barreiras geossintéticas Características requeridas para a Barreiras geossintéticas Características requeridas para a utilização utilização na construção de estruturas de armazenamento e de na construção de reservatórios e barragens deposição de resíduos sólidos EN 13361:2004 IDT EN 13493:2005 IDT Anulada em: 2014-01-27 Anulada em: 2014-01-27 Substituida por: EN 13361:2013 Substituida por: EN 13493:2013
C40 / CT 4 C40 / CT 4 NP EN 13361:2006 /A 1:2008 ( 1ª Edição ) NP EN ISO 10819:2001 ( 1ª Edição ) Barreiras geossintéticas Características requeridas para a utilização Vibração e choque mecânicos Vibração mão-braço Método para a na construção de reservatórios e barragens medição e a avaliação da transmissibilidade da vibração das luvas EN 13361:2004 /A 1:2006 IDT na palma da mão Anulada em: 2014-01-27 (ISO 10819:1996) Substituida por: EN 13361:2013 EN ISO 10819:1996 IDT Anulada em: 2014-01-27 C40 / CT 4 Substituida por: EN ISO 10819:2013 NP EN 13362:2007 ( 1ª Edição ) Barreiras geossintéticas Características requeridas para utilização C40 / CT 4 na construção de canais NP EN ISO 20743:2009 ( 1ª Edição ) EN 13362:2005 IDT Têxteis Determinação da actividade antibacteriana de produtos com Anulada em: 2014-01-27 acabamento antibacteriano Substituida por: EN 13362:2013 (ISO 20743:2007) EN ISO 20743:2007 IDT C40 / CT 4 Anulada em: 2014-01-27 NP EN 13491:2006 ( 1ª Edição ) Substituida por: EN ISO 20743:2013 Barreiras geossintéticas Características requeridas para a utilização como barreira aos líquidos na construção de túneis e estruturas C140 / CT 14 subterrâneas NP EN 14342-:2005+A1:2010 ( 1ª Edição ) EN 13491:2004 IDT Revestimentos de piso de madeira Características, avaliação da Anulada em: 2014-01-27 conformidade e marcação Substituida por: EN 13491:2013 EN 14342-:2005+A1:2008 IDT Anulada em: 2014-01-27 C40 / CT 4 Substituida por: EN 14342:2013 NP EN 13491:2006 /A 1:2008 ( 1ª Edição ) Barreiras geossintéticas Características requeridas para a utilização C280 / CT 28 como barreira aos líquidos na construção de túneis e estruturas NP 2041:1986 ( 1ª Edição ) subterrâneas Acústica Higiene e segurança no trabalho Limites de exposição do EN 13491:2004 /A 1:2006 IDT sistema braço-mão às vibrações Anulada em: 2014-01-27 Anulada em: 2014-01-16 Substituida por: EN 13491:2013 Substituida por: EN ISO 5349-1:2001;EN ISO 5349-2:2001
C40 / CT 4 C380 / CT 38 NP EN 13492:2007 ( 1ª Edição ) NP EN 14214:2013 ( 2ª Edição ) Barreiras geossintéticas Características requeridas para a Produtos petrolíferos líquidos Ésteres metílicos de ácidos gordos utilização na construção de estruturas de deposição de resíduos (FAME) para utilização em motores diesel e para aquecimento líquidos, estações de transferência ou confinamento secundário Especificações e métodos de ensaio EN 13492:2004 IDT EN 14214:2012 IDT Anulada em: 2014-01-27 Anulada em: 2014-01-27 Substituida por: EN 13492:2013 Substituida por: NP EN 14214:2014
C40 / CT 4 C1540 / CT 154 NP EN 13492:2007 /A 1:2008 ( 1ª Edição ) NP EN 1097-6:2003 ( 1ª Edição ) Barreiras geossintéticas Características requeridas para a Ensaios das propriedades mecânicas e físicas dos agregados Parte
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 6 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos 6: Determinação da massa volúmica e da absorção de água EN 1097-6:2000 IDT;EN 1097-6:2000 /AC :2002 IDT Anulada em: 2014-01-27 Substituida por: EN 1097-6:2013
C1540 / CT 154 NP EN 1097-6:2003 /A 1:2010 ( 1ª Edição ) Ensaios das propriedades mecânicas e físicas dos agregados Parte 6: Determinação da massa volúmica e da absorção de água EN 1097-6:2000 /A 1:2005 IDT Anulada em: 2014-01-27 Substituida por: EN 1097-6:2013
C1540 / CT 154 NP EN 13179-1:2010 ( 1ª Edição ) Ensaios de fíleres utilizados em misturas betuminosas Parte 1: Variação da temperatura de amolecimento de anel e bola EN 13179-1:2000 IDT Anulada em: 2014-01-27 Substituida por: EN 13179-1:2013
E5900 / CTE 59 NP IEC 60535:2008 ( 1ª Edição ) Ventiladores de jacto e reguladores de velocidade associados IEC 60535:1977 IDT Anulada em: 2014-01-08
M091 / CT 999091 NP EN ISO 10545-9:2004 ( 1ª Edição ) Pavimentos e revestimentos cerâmicos Parte 9: Determinação da resistência ao choque térmico (ISO 10545-9:1994) EN ISO 10545-9:1996 IDT Anulada em: 2014-01-27 Substituida por: EN ISO 10545-9:2013
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 7 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
1.3 Normas Portuguesas em re-exame
Com o objetivo de se assegurar a atualidade das normas integrantes do acervo normativo nacional, as Normas Portuguesas devem ser objeto de um re-exame periódico.
Mensalmente, o IPQ colocará em inquérito público, por um período de 30 dias úteis, através da Lista Mensal Normas e do site, uma lista de normas portuguesas pertencentes a um determinado escalão etário.
Para cada referência, menciona-se a designação codificada (prefixo NP, número, parte e data), o título e a respetiva data, bem como o seu autor.
Pretende-se com este inquérito público, que os interessados que pretendam dar os seus contributos o possam fazer, para cada uma das normas portuguesas constantes na presente listagem, respondendo aos seguintes pontos, tendo em conta a vossa experiência: 1 - Avaliação em termos de atualidade, a responder em alternativa: A norma portuguesa está atual ? A norma portuguesa deve ser revista ? A norma portuguesa está obsoleta ? 2 - Eventual legislação relacionada: A norma portuguesa está referida em legislação ? Se sim, qual ? 3 - Comentário
NOTA: Os interessados são convidados a pronunciarem-se somente sobre as normas que entendam conveniente, devendo enviar a informação ao Serviço de Normalização ([email protected])
.
LISTA VAZIA
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 8 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
1.4 Normas Europeias adotadas
Para cada Norma, indica-se a designação codificada (prefixo, número, ano), o título, o número do Termo de Adoção e a respetiva data. Os textos das Normas Europeias Adotadas como Normas Portuguesas estão disponíveis para consulta ou aquisição neste Instituto nas línguas oficiais do CEN/CENELEC (inglês, francês e alemão) e do ETSI (inglês). As adoções das Normas Europeias referenciadas entram em vigor no dia seguinte ao da edição desta Lista Mensal.
EN 301:2013 ( 3ª Edição ) Adhesives, phenolic and aminoplastic, for load-bearing timber EN 1344:2013 ( 2ª Edição ) structures Classification and performance requirements Clay pavers Requirements and test methods Termo de Adopção nº2014/ 0002, 2014-01-27 Termo de Adopção nº2014/ 0014, 2014-01-27
EN 336:2013 ( 3ª Edição ) EN 1790:2013 ( 2ª Edição ) Structural timber Sizes, permitted deviations Road marking materials Preformed road markings Termo de Adopção nº2014/ 0003, 2014-01-27 Termo de Adopção nº2014/ 0015, 2014-01-27
EN 438-9:2010+A1:2013 ( 1ª Edição ) High-pressure decorative laminates (HPL) Sheets based on EN 1870-11:2013 ( 2ª Edição ) thermosetting resins (Usually called Laminates) Part 9: Safety of woodworking machines Circular sawing machines Part 11: Classification and specifications for alternative core laminates Semi-automatic and automatic horizontal cross-cut sawing machines Termo de Adopção nº2014/ 0004, 2014-01-27 with one saw unit (radial arm saws) Termo de Adopção nº2014/ 0016, 2014-01-27 EN 485-2:2013 ( 5ª Edição ) Aluminium and aluminium alloys Sheet, strip and plate Part 2: EN 1870-12:2013 ( 2ª Edição ) Mechanical properties Safety of woodworking machines Circular sawing machines Part Termo de Adopção nº2014/ 0005, 2014-01-27 12: Pendulum cross-cut sawing machines Termo de Adopção nº2014/ 0017, 2014-01-27 EN 573-3:2013 ( 5ª Edição ) Aluminium and aluminium alloys Chemical composition and form of EN 10269:2013 ( 2ª Edição ) wrought products Part 3: Chemical composition and form of Steels and nickel alloys for fasteners with specified elevated and/or products low temperature properties Termo de Adopção nº2014/ 0006, 2014-01-27 Termo de Adopção nº2014/ 0018, 2014-01-27
EN 12098-3:2013 ( 2ª Edição ) EN 690:2013 ( 2ª Edição ) Controls for heating systems Part 3: Control equipment for Agricultural machinery Manure spreaders Safety electrical heating systems Termo de Adopção nº2014/ 0007, 2014-01-27 Termo de Adopção nº2014/ 0019, 2014-01-27
EN 754-2:2013 ( 3ª Edição ) EN 12390-13:2013 ( 1ª Edição ) Aluminium and aluminium alloys Cold drawn rod/bar and tube Part Testing hardened concrete Part 13: Determination of secant modulus 2: Mechanical properties of elasticity in compression Termo de Adopção nº2014/ 0008, 2014-01-27 Termo de Adopção nº2014/ 0020, 2014-01-27
EN 755-2:2013 ( 3ª Edição ) EN 12579:2013 ( 2ª Edição ) Aluminium and aluminium alloys Extruded rod/bar, tube and Soil improvers and growing media Sampling profiles Part 2: Mechanical properties Termo de Adopção nº2014/ 0021, 2014-01-27 Termo de Adopção nº2014/ 0009, 2014-01-27 EN 12580:2013 ( 2ª Edição ) EN 847-1:2013 ( 3ª Edição ) Soil improvers and growing media Determination of a quantity Tools for woodworking Safety requirements Part 1: Milling tools, Termo de Adopção nº2014/ 0022, 2014-01-27 circular saw blades Termo de Adopção nº2014/ 0010, 2014-01-27 EN 12622-:2009+A1:2013 ( 1ª Edição ) Safety of machine tools Hydraulic press brakes EN 847-2:2013 ( 2ª Edição ) Termo de Adopção nº2014/ 0023, 2014-01-27 Tools for woodworking Safety requirements Part 2: Requirements for the shank of shank mounted milling EN 12720-:2009+A1:2013 ( 1ª Edição ) Termo de Adopção nº2014/ 0011, 2014-01-27 Furniture Assessment of surface resistance to cold liquids Termo de Adopção nº2014/ 0024, 2014-01-27 EN 847-3:2013 ( 2ª Edição ) Tools for woodworking Safety requirements Part 3: Clamping EN 12721-:2009+A1:2013 ( 1ª Edição ) devices Furniture Assessment of surface resistance to wet heat Termo de Adopção nº2014/ 0012, 2014-01-27 Termo de Adopção nº2014/ 0025, 2014-01-27
EN 1124-4:2013 ( 2ª Edição ) EN 12722-:2009+A1:2013 ( 1ª Edição ) Pipes and fittings of longitudinally welded stainless steel pipes Furniture Assessment of surface resistance to dry heat with spigot and socket for wastewater systems Part 4: Components Termo de Adopção nº2014/ 0026, 2014-01-27 for vacuum drainage systems and for drainage systems on ships Termo de Adopção nº2014/ 0013, 2014-01-27 Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 9 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos EN 13071-2:2008+A1:2013 ( 1ª Edição ) Stationary waste containers up to 5 000 l, top lifted and bottom EN 15587-:2008+A1:2013 ( 1ª Edição ) emptied Part 2: Additional requirements for underground or partly Cereals and cereal products Determination of Besatz in wheat underground systems (Triticum aestivum L.), durum wheat (Triticum durum Desf.), rye Termo de Adopção nº2014/ 0027, 2014-01-27 (Secale cereale L.) and feed barley (Hordeum vulgare L.) Termo de Adopção nº2014/ 0041, 2014-01-27 EN 13136:2013 ( 2ª Edição ) Refrigerating systems and heat pumps Pressure relief devices and EN 15877-2:2013 ( 1ª Edição ) their associated piping Methods for calculation Rail applications Markings on railway vehicles Part 2: External Termo de Adopção nº2014/ 0028, 2014-01-27 markings on coaches, motives power units, locomotives and on track machines EN 13195:2013 ( 2ª Edição ) Termo de Adopção nº2014/ 0042, 2014-01-27 Aluminium and aluminium alloys Specifications for wrought and cast EN 16235:2013 ( 1ª Edição ) products for marine applications (shipbuilding, marine and offshore) Railway application Testing for the acceptance of running Termo de Adopção nº2014/ 0029, 2014-01-27 characteristics of railway vehicles - Freight wagons Conditions for dispensation of freight wagons with defined characteristics from EN 13278:2013 ( 2ª Edição ) on-track tests according to EN 14363 Open fronted gas-fired independent space heaters Termo de Adopção nº2014/ 0043, 2014-01-27 Termo de Adopção nº2014/ 0030, 2014-01-27 EN 16254:2013 ( 1ª Edição ) EN 13402-3:2013 ( 2ª Edição ) Adhesives Emulsion polymerized isocyanate (EPI) for load-bearing Size designation of clothes Part 3: Body measurements and intervals timber structures Classification and performance requirements Termo de Adopção nº2014/ 0031, 2014-01-27 Termo de Adopção nº2014/ 0044, 2014-01-27
EN 13482:2013 ( 2ª Edição ) EN 16317:2013 ( 1ª Edição ) Rubber hoses and hose assemblies for asphalt and bitumen Fertilizers Determination of trace elements Determination of Specification arsenic by inductively coupled plasma-atomic emission spectrometry Termo de Adopção nº2014/ 0032, 2014-01-27 (ICP-AES) after aqua regia dissolution Termo de Adopção nº2014/ 0045, 2014-01-27 EN 13496:2013 ( 2ª Edição ) Thermal insulation products for building applications EN 16318:2013 ( 1ª Edição ) Determination of the mechanical properties of glass fibre meshes Fertilizers Determination of trace elements Determination of as reinforcement for External Thermal Insulation Composite chromium(VI) by photometry (method A) and by ion Systems with renders (ETICS) chromatography Termo de Adopção nº2014/ 0033, 2014-01-27 with spectrophotometric detection (method B) Termo de Adopção nº2014/ 0046, 2014-01-27 EN 13547:2013 ( 1ª Edição ) Industrial valves Copper alloy ball valves EN 16319:2013 ( 1ª Edição ) Termo de Adopção nº2014/ 0034, 2014-01-27 Fertilizers Determination of trace elements Determination of cadmium, chromium, lead and nickel by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia EN 13707:2013 ( 2ª Edição ) dissolution Flexible sheets for waterproofing Reinforced bitumen sheets for roof Termo de Adopção nº2014/ 0047, 2014-01-27 waterproofing Definitions and characteristics Termo de Adopção nº2014/ 0035, 2014-01-27 EN 16320:2013 ( 1ª Edição ) Fertilizers Determination of trace elements Determination of EN 14025:2013 ( 3ª Edição ) mercury by vapour generation (VG) after aqua regia dissolution Tanks for the transport of dangerous goods Metallic pressure tanks Termo de Adopção nº2014/ 0048, 2014-01-27 Design and construction Termo de Adopção nº2014/ 0036, 2014-01-27 EN 16322:2013 ( 1ª Edição ) Conservation of Cultural Heritage Test methods Determination of EN 14067-4:2013 ( 2ª Edição ) drying properties Railway applications Aerodynamics Part 4: Requirements and test Termo de Adopção nº2014/ 0049, 2014-01-27 procedures for aerodynamics on open track Termo de Adopção nº2014/ 0037, 2014-01-27 EN 16361:2013 ( 1ª Edição ) Power operated pedestrian doors Product standard, performance EN 14509:2013 ( 2ª Edição ) characteristics Pedestrian doorsets, other than swing type, initially Self-supporting double skin metal faced insulating panels Factory designed for installation with power operation without resistance to made products Specifications fire and smoke leakage characteristics Termo de Adopção nº2014/ 0038, 2014-01-27 Termo de Adopção nº2014/ 0050, 2014-01-27
EN 15383-:2012+A1:2013 ( 1ª Edição ) EN 16401:2013 ( 1ª Edição ) Plastics piping systems for drainage and sewerage Glassreinforced Chemicals used for treatment of swimming pool water Sodium thermosetting plastics (GRP) based on polyester resin (UP) chloride used for electrochlorinator systems Manholes and inspection chambers Termo de Adopção nº2014/ 0051, 2014-01-27 Termo de Adopção nº2014/ 0039, 2014-01-27 EN 16402:2013 ( 1ª Edição ) EN 15503-:2009+A1:2013 ( 1ª Edição ) Paints and varnishes Assessment of emissions of substances from Garden equipment Garden blowers, vacuums and blower/vacuums coatings into indoor air Sampling, conditioning and testing Safety Termo de Adopção nº2014/ 0052, 2014-01-27 Termo de Adopção nº2014/ 0040, 2014-01-27
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 10 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos EN 16423:2013 ( 1ª Edição ) Liquefied petroleum gases Determination of dissolved residue Gas EN 60601-1-9:2008 /A 1:2013 ( 1ª Edição ) chromatographic method using liquid, on-column injection Medical electrical equipment Part 1-9:General requirements for Termo de Adopção nº2014/ 0053, 2014-01-27 basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design EN 50382-1:2008 /A 1:2013 ( 1ª Edição ) (IEC 60601-1-9:2007/A1:2013) Railway applications - Railway rolling stock high temperature power Termo de Adopção nº2014/ 0077, 2014-01-27 cables having special fire performance Part 1:General requirements Termo de Adopção nº2014/ 0066, 2014-01-27 EN 60747-16-5:2013 ( 1ª Edição ) Semiconductor devices Part 16-5:Microwave integrated circuits - EN 50382-2:2008 /A 1:2013 ( 1ª Edição ) Oscillators Railway applications - Railway rolling stock high temperature power (IEC 60747-16-5:2013) cables having special fire performance Part 2:Single core silicone Termo de Adopção nº2014/ 0078, 2014-01-27 rubber insulated cable for 120 ºC or 150 ºC Termo de Adopção nº2014/ 0067, 2014-01-27 EN 61191-2:2013 ( 2ª Edição ) Printed board assemblies Part 2:Sectional specification - EN 50541-2:2013 ( 1ª Edição ) Requirements for surface mount soldered assemblies Three phase dry-type distribution transformers 50 Hz, from 100 kVA (IEC 61191-2:2013) to 3 150 kVA, with highest voltage for equipment not exceeding 36 Termo de Adopção nº2014/ 0079, 2014-01-27 kV Part 2:Determination of loadability of a transformer loaded with non-sinusoidal current EN 61788-5:2013 ( 2ª Edição ) Termo de Adopção nº2014/ 0068, 2014-01-27 Superconductivity Part 5:Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cub-Ti EN 50548:2011 /A 1:2013 ( 1ª Edição ) composite superconducting wires Junction boxes for photovoltaic modules (IEC 61788-5:2013) Termo de Adopção nº2014/ 0069, 2014-01-27 Termo de Adopção nº2014/ 0080, 2014-01-27
EN 61788-12:2013 ( 2ª Edição ) EN 55013:2013 ( 3ª Edição ) Superconductivity Part 12:Matrix to superconductor volume ratio Sound and television broadcast receivers and associated equipment measurement - Copper to non-copper volume ratio of Nb3Sn - Radio disturbance characteristics - Limits and methods of composite superconducting wires measurement (IEC 61788-12:2013) (CISPR 13:2009, modif) Termo de Adopção nº2014/ 0081, 2014-01-27 Termo de Adopção nº2014/ 0070, 2014-01-27
EN 60204-31:2013 ( 2ª Edição ) EN 61970-301:2013 ( 3ª Edição ) Safety of machinery - Electrical equipment of machines Part Energy management system application program interface 31:Particular safety and EMC requirements for sewing machines, (EMS-API) Part 301:Common information model (CIM) base units and systems (IEC 61970-301:2013) (IEC 60204-31:2013) Termo de Adopção nº2014/ 0082, 2014-01-27 Termo de Adopção nº2014/ 0071, 2014-01-27 EN 62056-6-1:2013 ( 1ª Edição ) EN 60335-2-7:2010 /A 11:2013 ( 5ª Edição ) Electricity metering data exchange - The DLMS/COSEM suite Part Household and similar electrical appliances - Safety Part 6-1:Object Identification System (OBIS) 2-7:Particular requirements for washing machines (IEC 62056-6-1:2013) Termo de Adopção nº2014/ 0072, 2014-01-27 Termo de Adopção nº2014/ 0083, 2014-01-27
EN 60384-14:2013 ( 2ª Edição ) EN 62056-6-2:2013 ( 1ª Edição ) Fixed capacitors for use in electronic equipment Part 14:Sectional Electricity metering data exchange - The DLMS/COSEM suite Part specification: Fixed capacitors for electromagnetic interference 6-2:COSEM interface classes suppression and connection to the supply mains (IEC 62056-6-2:2013) (IEC 60384-14:2013) Termo de Adopção nº2014/ 0084, 2014-01-27 Termo de Adopção nº2014/ 0073, 2014-01-27 EN 62056-9-7:2013 ( 1ª Edição ) Electricity metering data exchange - The DLMS/COSEM suite Part EN 60444-6:2013 ( 2ª Edição ) 9-7:Communication profile for TCP-UDP/IP networks Measurement of quartz crystal unit parameters Part 6:Measurement (IEC 62056-9-7:2013) of drive level dependence (DLD) Termo de Adopção nº2014/ 0085, 2014-01-27 (IEC 60444-6:2013) Termo de Adopção nº2014/ 0074, 2014-01-27 EN 62127-3:2007 /A 1:2013 ( 1ª Edição ) Ultrasonics - Hydrophones Part 3:Properties of hydrophones for EN 60519-4:2013 ( 3ª Edição ) ultrasonic fields up to 40 MHz Safety in electroheating installations Part 4:Particular requirements (IEC 62127-3:2007/A1:2013) for arc furnace installations Termo de Adopção nº2014/ 0086, 2014-01-27 (IEC 60519-4:2013) Termo de Adopção nº2014/ 0075, 2014-01-27 EN 62271-109:2009 /A 1:2013 ( 2ª Edição ) High-voltage switchgear and controlgear Part EN 60598-2-24:2013 ( 2ª Edição ) 109:Alternating-current series capacitor by-pass switches Luminaires Part 2-24:Particular requirements - Luminaires with (IEC 62271-109:2008/A1:2013) limited surface temperatures Termo de Adopção nº2014/ 0087, 2014-01-27 (IEC 60598-2-24:2013) Termo de Adopção nº2014/ 0076, 2014-01-27 EN 62343:2013 ( 1ª Edição ) Dynamic modules - General and guidance
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 11 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos (IEC 62343:2013) EN ISO 8980-3:2013 ( 3ª Edição ) Termo de Adopção nº2014/ 0088, 2014-01-27 Ophthalmic optics Uncut finished spectacle lenses Part 3: Transmittance specifications and test methods EN 62388:2013 ( 2ª Edição ) (ISO 8980-3:2013) Maritime navigation and radiocommunication equipment and Termo de Adopção nº2014/ 0055, 2014-01-27 systems Shipborne radar - Performance requirements , methods of testing and required test results EN ISO 9606-1:2013 ( 1ª Edição ) (IEC 62388:2013) Qualification testing of welders Fusion welding Part 1: Steels Termo de Adopção nº2014/ 0089, 2014-01-27 (ISO 9606-1:2012 including Cor 1:2012) Termo de Adopção nº2014/ 0056, 2014-01-27 EN 62496-2-4:2013 ( 1ª Edição ) Optical circuit boards - Basic test and measurement procedures Part EN ISO 10581:2013 ( 1ª Edição ) 2-4:Optical transmission test for optical circuit boards without Resilient floor coverings Homogeneous poly(vinyl chloride) floor input/output fibres covering Specifications (IEC 62496-2-4:2013) (ISO 10581:2011) Termo de Adopção nº2014/ 0090, 2014-01-27 Termo de Adopção nº2014/ 0057, 2014-01-27
EN 62612:2013 ( 1ª Edição ) EN ISO 13137:2013 ( 1ª Edição ) Self-ballasted LED lamps for general lighting services with supply Workplace atmospheres Pumps for personal sampling of chemical voltages > 50 V - Performance requirements and biological agents Requirements and test methods (IEC 62612:2013) (ISO 13137:2013) Termo de Adopção nº2014/ 0091, 2014-01-27 Termo de Adopção nº2014/ 0058, 2014-01-27
EN 62673:2013 ( 1ª Edição ) EN ISO 14113:2013 ( 3ª Edição ) Methodology for communication network dependability assessment Gas welding equipment Rubber and plastics hose and hose and assurance assemblies for use with industrial gases up to 450 bar (45 MPa) (IEC 62673:2013) (ISO/FDIS 14113:2013) Termo de Adopção nº2014/ 0092, 2014-01-27 Termo de Adopção nº2014/ 0059, 2014-01-27
EN 62693:2013 ( 1ª Edição ) EN ISO 14119:2013 ( 1ª Edição ) Industrial electroheating installations - Test methods for infrared Safety of machinery Interlocking devices associated with guards electroheating installations Principles for design and selection (IEC 62693:2013) (ISO 14119:2013) Termo de Adopção nº2014/ 0093, 2014-01-27 Termo de Adopção nº2014/ 0060, 2014-01-27
EN 62739-1:2013 ( 1ª Edição ) EN ISO 14889:2013 ( 4ª Edição ) Test method for erosion of wave soldering equipment using molten Ophthalmic optics Spectacle lenses Fundamental requirements for lead-free solder alloy Part 1:Erosion test method for metal materials uncut finished lenses without surface processing (ISO/FDIS 14889:2013) (IEC 62739-1:2013) Termo de Adopção nº2014/ 0061, 2014-01-27 Termo de Adopção nº2014/ 0094, 2014-01-27 EN ISO 18265:2013 ( 2ª Edição ) EN 300444:2013 ( V2.4.1 ) Metallic materials Conversion of hardness values Digital Enhanced Cordless Telecommunications (DECT); Generic (ISO 18265:2013) Access Profile (GAP) Termo de Adopção nº2014/ 0062, 2014-01-27 Termo de Adopção nº2014/ 0095, 2014-01-27 EN ISO 25178-603:2013 ( 1ª Edição ) EN 302663:2013 ( V1.2.1 ) Geometrical product specifications (GPS) Surface texture: Areal Intelligent Transport Systems (ITS); Access layer specification for Part 603: Nominal characteristics of non-contact (phase-shifting Intelligent Transport Systems operating in the 5 GHz frequency band interferometric microscopy) instruments Termo de Adopção nº2014/ 0096, 2014-01-27 (ISO/FDIS 25178-603:2013) Termo de Adopção nº2014/ 0063, 2014-01-27 EN 302961-1:2013 ( V.1.2.1 ) Electromagnetic compatibility and Radio spectrum Matters (ERM); EN ISO 28258:2013 ( 1ª Edição ) Maritime Personal Homing Beacon intended for use on the frequency Soil quality Digital exchange of soil-related data 121,5 MHz for search and rescue purposes only Part 1:Technical (ISO 28258:2013) characteristics and methods of measurement Termo de Adopção nº2014/ 0064, 2014-01-27 Termo de Adopção nº2014/ 0097, 2014-01-27 EN ISO 28888:2013 ( 1ª Edição ) EN 302961-2:2013 ( V1.2.1 ) Dentistry Screening method for erosion potential of oral rinses on Electromagnetic compatibility and Radio spectrum Matters (ERM); dental hard tissues Maritime Personal Homing Beacon intended for use on the frequency (ISO 28888:2013) 121,5 MHz for search and rescue purposes only Part 2:Harmonized Termo de Adopção nº2014/ 0065, 2014-01-27 EN covering the essential requirements of article 3.2 of the R&TTE Directive Termo de Adopção nº2014/0001, 2014-01-24
EN 419211-3:2013 ( 1ª Edição ) Protection profiles for secure signature creation device Part 3: Device with key import Termo de Adopção nº2014/ 0054, 2014-01-27
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 12 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos
2. Normas Europeias Publicadas
2.1 CEN
Normas Europeias aprovadas na área não eletrotécnica pelo Comité Europeu de Normalização (CEN), e pelo Comité Europeu para a Normalização do Ferro e do Aço (ECISS).
Para cada referência, menciona-se o comité técnico, a designação codificada e o título.
TC 10 TC 189 CEN/TS 115-4:2014 ( Ed. 1 ) EN 13249:2014 ( Ed. 2 ) Safety of escalators and moving walks Part 4: Interpretations Geotextiles and geotextile-related products Characteristics required related to EN 115 family of standards for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) TC 19 EN 14214-:2012+A1:2014 ( Ed. 1 ) TC 189 Liquid petroleum products Fatty acid methyl esters (FAME) for use EN 13250:2014 ( Ed. 2 ) in diesel engines and heating applications Requirements and test Geotextiles and geotextile-related products Characteristics required methods for use in the construction of railways
TC 127 TC 189 EN 1634-1:2014 ( Ed. 3 ) EN 13251:2014 ( Ed. 2 ) Fire resistance and smoke control tests for door and shutter Geotextiles and geotextile-related products Characteristics required assemblies, openable windows and elements of building hardware for use in earthworks, foundations and retaining structures Part 1: Fire resistance test for door and shutter assemblies and openable windows TC 189 EN 13252:2014 ( Ed. 2 ) TC 133 Geotextiles and geotextile-related products Characteristics required EN 13599:2014 ( Ed. 2 ) for use in drainage systems Copper and copper alloys Copper plate, sheet and strip for electrical purposes TC 189 EN 13253:2014 ( Ed. 2 ) TC 138 Geotextiles and geotextile-related products Characteristics required EN 16407-1:2014 ( Ed. 1 ) for use in erosion control works (coastal protection, bank Non-destructive testing Radiographic inspection of corrosion and revetments) deposits in pipes by X- and gamma rays Part 1: Tangential radiographic inspection TC 189 EN 13254:2014 ( Ed. 2 ) TC 138 Geotextiles and geotextile-related products Characteristics required EN 16407-2:2014 ( Ed. 1 ) for the use in the construction of reservoirs and dams Non-destructive testing Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays Part 2: Double wall TC 189 radiographic inspection EN 13255:2014 ( Ed. 2 ) Geotextiles and geotextile-related products Characteristics required TC 139 for use in the construction of canals EN ISO 16927:2014 ( Ed. 1 ) Paints and varnishes Determination of the overcoatability and TC 189 recoatability of a coating EN 13256:2014 ( Ed. 2 ) (ISO 16927:2014) Geotextiles and geotextile-related products Characteristics required for use in the construction of tunnels and underground structures TC 154 EN 1097-9:2014 ( Ed. 2 ) TC 189 Tests for mechanical and physical properties of aggregates Part 9: EN 13257:2014 ( Ed. 2 ) Determination of the resistance to wear by abrasion from studded Geotextiles and geotextile-related products Characteristics required tyres - Nordic test for use in solid waste disposals
TC 162 TC 189 EN 1621-2:2014 ( Ed. 2 ) EN 13265:2014 ( Ed. 2 ) Motorcyclists' protective clothing against mechanical impact Part Geotextiles and geotextile-related products Characteristics required 2: Motorcyclists' back protectors - Requirements and test methods for use in liquid waste containment projects
TC 165 TC 192 CEN/TR 16626:2014 ( Ed. 1 ) EN 14043:2014 ( Ed. 2 ) Vitrified clay pipe systems for drains and sewers Guidance for High rise aerial appliances for fire and rescue service use voluntary third-party certification procedures Turntable ladders with combined movements Safety and performance requirements and test methods Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 13 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos compensated, rated current 20 A to 50 A Part 001: Technical TC 192 specification EN 14044:2014 ( Ed. 2 ) High rise aerial appliances for fire service use Turntable ladders TC AECMA with sequential movements Safety and performance requirements EN 2665-004:2013 ( Ed. 2 ) and test methods Aerospace series Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A Part 004: UNC thread TC 205 terminals - Product standard EN ISO 8637:2014 ( Ed. 1 ) Cardiovascular implants and extracorporeal systems TC AECMA Haemodialysers, haemodiafilters, haemofilters and EN 3155-065:2013 ( Ed. 2 ) haemoconcentrators (ISO 8637:2010, including Amendment 1 Aerospace series - Electrical contacts used in elements of connection 2013-04-01) Part 065: Contacts, electrical, male, type A, crimp, class S, size 8 - Product standard TC 205 EN ISO 8638:2014 ( Ed. 1 ) TC AECMA Cardiovascular implants and extracorporeal systems Extracorporeal EN 3155-066:2013 ( Ed. 2 ) blood circuit for haemodialysers, haemodiafilters and haemofilters Aerospace series Electrical contacts used in elements of connection (ISO 8638:2010) Part 066: Contacts, electrical, female, type A, crimp, class S, size 8 - Product standard TC 241 EN 13279-2:2014 ( Ed. 2 ) TC AECMA Gypsum binders and gypsum plasters Part 2: Test methods EN 3375-012:2013 ( Ed. 1 ) Aerospace series Cable, electrical, for digital data transmission TC 352 Part 012: Single braid - Star Quad 100 ohms - 260 °C - Type KH - CEN ISO/TS 13830:2013 ( Ed. 2 ) Product standard Nanotechnologies Guidance on voluntary labelling for consumer products containing manufactured nano-objects TC AECMA (ISO/TS 13830:2013) EN 4156:2013 ( Ed. 1 ) Aerospace series Rod ends, with self-aligning double row ball TC 353 bearings and threaded shank in steel - Inner ring and balls in EN ISO/IEC 19788-5:2014 ( Ed. 1 ) corrosion resisting steel - Dimensions and loads Inch series Information technology Learning, education and training - Metadata for learning resources Part 5: Educational elements (ISO/IEC 19788-5:2012)
TC 383 CEN/TS 16214-2:2014 ( Ed. 1 ) Sustainability criteria for the production of biofuels and bioliquids for energy applications Principles, criteria, indicators and verifiers Part 2: Conformity assessment including chain of custody and mass balance
TC SSC01 EN ISO 8586:2014 ( Ed. 1 ) Sensory analysis General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors (ISO 8586:2012)
TC AECMA EN 2030:2013 ( Ed. 1 ) Aerospace series Steel X105CrMo17 (1.3544) - Hardened and tempered Bars - De <= 150 mm
TC AECMA EN 2267-010:2013 ( Ed. 2 ) Aerospace series Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C Part 010: DR family, single UV laser printable - Product standard
TC AECMA EN 2346-005:2013 ( Ed. 1 ) Aerospace series Cable, electrical, fire resistant - Operating temperatures between - 65 °C and 260 °C Part 005: DW family, single UV laser printable and multicore assembly - Light weight - Product standard
TC AECMA EN 2648:2013 ( Ed. 2 ) Aerospace series Washers, concave, in alloy steel, cadmium plated
TC AECMA EN 2665-001:2013 ( Ed. 2 ) Aerospace series Circuit breakers, three-pole, temperature
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 14 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
2.2 CENELEC
Normas Europeias aprovadas na área eletrotécnica pelo Comité Europeu de Normalização Eletrotécnica (CENELEC)
Para cada referência, menciona-se o Comité Técnico, a designação codificada e o título.
BTTF 116-2 EN 50436-1:2014 ( Ed. 2 ) Alcohol interlocks - Test methods and performance requirements TC 61 Part 1:Instruments for drink-driving-offender programs EN 60335-1:2012 /AC /Jan:2014 ( Ed. 4 ) Household and similar electrical appliances - Safety Part 1:General BTTF 116-2 requirements EN 50436-2:2014 ( Ed. 2 ) (IEC 60335-1:2010, modif) Alcohol interlocks - Test methods and performance requirements Part 2:Instruments having a mouthpiece and measuring breath TC 64 alcohol for general preventive use HD 60364-5-557:2013 ( Ed. 1 ) Low-voltage electrical installations Part 5-557:Selection and erection SR 80 of electrical equipment - Auxiliary circuits EN 62287-1:2011 /A 1:2014 ( Ed. 1 ) (IEC 60364-5-55:2011/A1:2012) (Clausure 557) Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic TC 79 identification system (AIS) Part 1:Carrier-sense time division CLC/TS 50131-2-10:2014 ( Ed. 1 ) multiple access Alarm systems - Intrusion and hold-up systems Part 2-10:Intrusion (CSTDMA) techniques detectors - Lock state contacts (magnetic) (IEC 62287-1:2010/A1:2013) TC 79 TC 55 EN 50131-2-7-1:2012 /A 1:2013 ( Ed. 2 ) EN 60317-0-1:2014 ( Ed. 4 ) Alarm systems - Intrusion and hold-up systems Part 2-7-1:Intrusion Specifications for particular types of winding wires Part detectors - Glass break detectors (acoustic) 0-1:General requirements - Enamelled round copper wire (IEC 60317-0-1:2013) TC 79 EN 50131-2-7-2:2012 /A 1:2013 ( Ed. 1 ) TC 55 Alarm systems - Intrusion and hold-up systems Part 2-7-2:Intrusion EN 60317-0-2:2014 ( Ed. 3 ) detectors - Glass break detectors (passive) Specifications for particular types of winding wires Part 0-2:General requirements - Enamelled rectangular copper wire TC 79 (IEC 60317-0-2:2013) EN 50131-2-7-3:2012 /A 1:2013 ( Ed. 1 ) Alarm systems - Intrusion and hold-up systems Part 2-7-3:Intrusion TC 57 detectors - Glass break detectors (active) EN 61970-452:2013 ( Ed. 1 ) Energy mManagement system application program interface TC 79 (EMS-API) Part 452:CIM Static transmission network model EN 62676-2-1:2014 ( Ed. 1 ) profiles Video surveillance systems for use in security applications Part (IEC 61970-452:2013) 2-1:Video transmission protocols - General requirements (IEC 62676-2-1:2013) TC 57 EN 62325-351:2013 ( Ed. 1 ) TC 79 Framework for energy market communications Part 351:CIM EN 62676-2-2:2014 ( Ed. 1 ) European market model exchange profile Video surveillance systems for use in security applications Part (IEC 62325-351:2013) 2-2:Video transmission protocols - IP interoperability implementation based on HTTP and REST services TC 57 (IEC 62676-2-2:2013) EN 62325-451-1:2013 ( Ed. 1 ) Framework for energy market communications Part TC 79 451-1:Acknowledgement business process and contextual model EN 62676-2-3:2014 ( Ed. 1 ) for CIM European market Video surveillance systems for use in security applications Part (IEC 62325-451-1:2013) 2-3:Video transmission protocols - IP interoperability implementation based on Web services TC 57 (IEC 62676-2-3:2013) EN 62361-2:2013 ( Ed. 1 ) Power systems management and associated information exchange - TC 86BXA Interoperability in the long term Part 2:End to end quality codes EN 61300-3-25:2013 ( Ed. 2 ) for supervisory control and data acquisition (SCADA) Fibre optic interconnecting devices and passive components - Basic (IEC 62361-2:2013) test and measurement procedures Part 3-25:Examinations and measurements - Concentricity of the non-angled ferrules and TC 59X non-angled ferrules with fibre installed EN 61591:1997 /A 11:2014 ( Ed. 1 ) (IEC 61300-3-25:2013) Household range hoods and other cooking fume extractors - Methods for measuring performance
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 15 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos TC 95X EN 60255-127:2014 ( Ed. 1 ) Measuring relays and protection equipment Part 127:Functional requirements for over/under voltage protection (IEC 60255-127:2010)
TC 100X EN 62394:2014 ( Ed. 1 ) Service diagnostic interface for consumer electronics products and networks - Implementation for echnonet (IEC 62394:2013)
TC 100X EN 62481-2:2014 ( Ed. 1.0 ) Digital living network alliance (DLNA) home networked device interoperability guidelines Part 2:DLNA media formats (IEC 62481-2:2013)
TC 100X EN 62680-1:2013 ( Ed. 1 ) Universal serial bus interfaces for data and power Part 1:Universal serial bus specification, revision 2.0 (IEC 62680-1:2013)
TC 100X EN 62680-2:2013 ( Ed. 1 ) Universal serial bus interfaces for data and power Part 2:Universal serial bus - Micro-USB cables and connectors specification, revision 1.01 (IEC 62680-2:2013)
TC 205 EN 50491-6-1:2014 ( Ed. 1 ) General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 6-1:HBES installations - Installation and plannnning
TC 209 EN 50083-8:2013 ( Ed. 3 ) Cable networks for television signals, sound signals and interactive services Part 8:Electromagnetic compatibility for networks
TC 215 EN 50700:2014 ( Ed. 1 ) Information technology - Premises distribution access network (PDAN) cabling to support deployment of optical broadband networks
TC 216 CLC/TS 50612:2013 ( Ed. 1 ) Portable electrical apparatus for the measurement of combustion flue gas parameters - Guide to their use in the process of commissioning, servicing and maintaining gas fire central heating boilers
TC BT GUIDE 1:2014 ( Ed. 13 ) Survey of Resolutions of the CENELEC General Assembly
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 16 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
2.3 CEN/CENELEC
Normas Europeias aprovadas pelo Comité Europeu de Normalização (CEN) / Comité Europeu de Normalização Eletrotécnica (CENELEC)
Para cada referência, menciona-se a designação codificada e o título.
LISTA VAZIA
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 17 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
2.4 ETSI
Normas Europeias aprovadas e publicadas no setor das Telecomunicações pelo Instituto Europeu de Normalização para as Telecomunicações (ETSI)
Para cada referência, menciona-se a designação codificada e o título.
TC ETSI EN 300743:2014 ( V1.5.1 ) Digital Video Broadcasting (DVB); Subtitling systems
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 18 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
3. Normas Internacionais publicadas
Normas Internacionais aprovadas e publicadas pela Comissão Eletrotécnica Internacional (IEC) e pela Organização Internacional de Normalização (ISO)
Para cada referência, menciona-se o Comité Técnico, a designação codificada, a data e o título.
IEC TC 86C TC 17B IEC/TR 61282-4:2013 ( Ed 2.0 ) IEC 60947-6-1:2005 /A 1:2013 ( Ed 2.0 ) Fibre optic communication system design guides Part Low-voltage switchgear and controlgear Part 6-1:Multiple function 4:Accommodation and utilization of non-linear effects equipment - Transfer switching equipment TC 86C TC 23A IEC/TR 61292-9:2013 ( Ed 1.0 ) IEC 62275:2013 ( Ed 2.0 ) Optical amplifiers Part 9:Semiconductor optical amplifiers (SOAs) Cable management systems - Cable ties for electrical installations TC 86C TC 23E IEC/TR 62572-4:2013 ( Ed 1.0 ) IEC 62606:2013 /CORRIGENDUM Nov:2013 ( Ed 1.0 ) Fibre optic active components and devices - Reliability standards General requirements for Arc Fault Detection Devices Part 4:Guideline for optical connector end-face cleaning methods for receptacle style optical transceivers TC 34A IEC 62707-1:2013 ( Ed 1.0 ) TC 1 LED-binning Part 1:General requirements and white colour grid IEC 60050-901:2013 ( Ed 1.0 ) International Electrotechnical Vocabulary Part 901:Standardization TC 48D IEC 61587-5:2013 ( Ed 1.0 ) TC 1 Mechanical structures for electronic equipment - Tests for IEC IEC 60050-902:2013 ( Ed 1.0 ) 60917 and IEC 60297 International Electrotechnical Vocabulary Part 902:Conformity Part 5:Seismic tests for chassis, subracks, and plug-in units assessment
TC 48B TC 9 IEC/PAS 61076-2-109:2010 ( Ed 1.0 ) IEC 62724:2013 ( Ed 1.0 ) Connectors for electronic equipment - Product requirements Part Railway applications - Fixed installations - Electric traction - 2-109:Circular connectors - Detail specification for connectors M12 Insulating synthetic rope assemblies for support of overhead contact x 1 with screw-locking, for data transmissions with frequencies up lines to 500 MHz TC 10 TC 61D IEC 60422:2013 /CORRIGENDUM Dec:2013 ( Ed 4.0 ) IEC 60335-2-40:2013 ( Ed 5.0 ) Mineral insulating oils in electrical equipment - Supervision and Household and similar electrial appliances - Safety Part maintenance guidance 2-40:Particular Requirements for electrical heat pumps, air-conditioners and dehumidifiers TC 10 IEC 62770:2013 ( Ed 1.0 ) TC 62A Fluids for electrotechnical applications - Unused natural esters IEC 60601-1-10:2007 /A 1:2013 ( Ed 1.0 ) liquids for transformers and similar electrical equipment Medical electrical equipment Part 1-10:General requirements for basic safety and essential performance - Collateral Standard: TC 15 Requirements for the development of physiologic closed-loop IEC 60684-3-216:2001 /A 2:2013 ( Ed 1.0 ) controllers Flexible insulating sleeving Part 3:Specifications for individual types of sleeving Sheet 216:Heat-shrinkable, flame retarded, TC 62C limited-fire-hazard sleeving IEC 60601-2-17:2013 ( Ed 3.0 ) Medical electrical equipment Part 2-17:Particular requirements for TC 15 the safety of automatically-controlled brachytherapy afterloading IEC 60684-3-280:2010 /A 1:2013 ( Ed 1.0 ) equipment Flexible insulating sleeving Part 3:Specification for individual types of sleeving Sheet 280:Heat-shrinkable, polyolefin sleeving, TC 86A anti-tracking IEC 60794-2-20:2013 ( Ed 3.0 ) Optical fibre cables Part 2-20:Indoor cables - Family specification TC 15 for multi-fibre optical cables IEC 60684-3-283:2010 /A 1:2013 ( Ed 1.0 ) Flexible insulating sleeving Part 3:Specifications for individual TC 86C types of sleeving IEC 61290-3-3:2013 ( Ed 1.0 ) Sheet 283:Heat-shrinkable, polyolefin sleeving for bus bar Optical amplifiers - Test methods Part 3-3:Noise figure parameters - insulation Signal power to total ASE power ratio TC 15 IEC 60819-3-4:2013 ( Ed 2.0 ) Non-cellulosic papers for electrical purposes Part 3:Specifications for individual materials Sheet 4:Aramid fibre paper containing not Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 19 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos more than 50% of mica particles TC 72 IEC 60730-2-5:2013 ( Ed 4.0 ) TC 18 Automatic electrical controls Part 2-5:Particular requirements for IEC 61892-6:2013 ( Ed 3.0 ) automatic electrical burner control systems Mobile and fixed offshore units - Electrical installations Part 6:Installation TC 79 IEC 62676-2-1:2013 ( Ed 1.0 ) TC 20 Video surveillance systems for use in security applications Part IEC 60754-1:2011 /CORRIGENDUM Nov:2013 ( Ed 3.0 ) 2-1:Video transmission protocols - General requirements Test on gases evolved during combustion of materials from cables Part 1:Determination of the halogen acid gas content TC 79 IEC 62676-2-2:2013 ( Ed 1.0 ) TC 20 Video surveillance systems for use in security applications Part IEC 62230:2006 /A 1:2013 ( Ed 1.0 ) 2-2:Video transmission protocols - IP interoperability Electric cables - Spark-test method implementation based on HTTP and REST services
TC 26 TC 79 IEC 60974-3:2013 ( Ed 3.0 ) IEC 62676-2-3:2013 ( Ed 1.0 ) Arc welding equipment Part 3:Arc striking and stabilizing devices Video surveillance systems for use in security applications Part 2-3:Video transmission protocols - IP interoperability TC 31 implementation based on web services IEC 60079-0:2011 /CORRIGENDUM Dec:2013 ( Ed 6.0 ) Explosive atmospheres Part 0:Equipment - General requirements TC 80 IEC 61162-1:2010 /CORRIGENDUM Dec:2013 ( Ed 4.0 ) TC 36 Maritime navigation and radiocommunication equipment and IEC 60507:2013 ( Ed 3.0 ) systems - Digital interfaces Part 1:Single talker and multiple listeners Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems TC 80 IEC 61924-2:2012 /CORRIGENDUM Nov:2013 ( Ed 1.0 ) TC 38 Maritime navigation and radiocommunication equipment and IEC 61869-4:2013 ( Ed 1.0 ) systems -Integrated navigation systems (INS) Part 2:Modular Instrument transformers Part 4:Additional requirements for structure for INS - Operational and performance requirements, combined transformers methods of testing and required test results
TC 57 TC 85 IEC 61850-3:2013 ( Ed 2.0 ) IEC 60688:2012 /CORRIGENDUM Dez:2013 ( Ed 3.0 ) Communication networks and systems for power utility automation Electrical measuring transducers for converting a.c. electrical Part 3:General requirements quantities to analogue or digital signals
TC 57 TC 85 IEC 61970-301:2013 ( Ed 5.0 ) IEC 62586-1:2013 ( Ed 1.0 ) Energy Management System Application Program Interface Power quality measurement in power supply systems Part 1:Power (EMS-API) Part 301:Common Information Model (CIM) Base Quality Instruments (PQI)
TC 61 TC 85 IEC 60335-1:2010 /A 1:2013 ( Ed 5.0 ) IEC 62586-2:2013 ( Ed 1.0 ) Household and similar electrical appliances - Safety Part 1:General Power quality measurement in power supply systems Part requirements 2:Functional tests and uncertainty requirements
TC 61 TC 87 IEC 60335-2-32:2002 /A 2:2013 ( Ed 4.0 ) IEC 62555:2013 ( Ed 1.0 ) Household and similar electrical appliances - Safety Part Ultrasonics - Power measurement - Output power measurement for 2-32:Particular requirements for massage appliances high intensity therapeutic ultrasound (HITU) transducers and systems TC 61 IEC 60335-2-84:2002 /A 2:2013 ( Ed 2.0 ) TC 88 Household and similar electrical appliances - Safety Part IEC 61400-2:2013 ( Ed 3.0 ) 2-84:Particular requirements for toilets Wind turbines Part 2:Small wind turbines
TC 61 TC 89 IEC 60335-2-109:2010 /A 1:2013 ( Ed 1.0 ) IEC 60695-1-40:2013 ( Ed 1.0 ) Household and similar electrical appliances - Safety Part Fire hazard testing Part 1-40:Guidance for assessing the fire hazard 2-109:Particular requirements for UV radiation water treatment of electrotechnical products - Insulating liquids appliances TC 89 TC 69 IEC 60695-11-2:2013 ( Ed 2.0 ) IEC/TS 62763:2013 ( Ed 1.0 ) Fire hazard testing Part 11-2:Test flames - 1 kW nominal pre-mixed Pilot function through a control pilot circuit using PWM (pulse flame: Apparatus, confirmatory test arrangement and guidance width modulation) and a control pilot wire TC 91 TC 72 IEC 61249-4-18:2013 ( Ed 1.0 ) IEC 60730-1:2013 ( Ed 5.0 ) Materials for printed boards and other interconnecting structures Automatic Electrical Controls Part 1:General requirements Part 4-18:Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 20 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
TC 91 IEC 61249-4-19:2013 ( Ed 1.0 ) Materials for printed boards and other interconnecting structures Part 4-19:Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
TC 95 IEC 60255-127:2010 ( Ed 1.0 ) Measuring relays and protection equipment Part 127:Functional requirements for over/under voltage protection
TC 105 IEC/TS 62282-1:2013 ( Ed 3.0 ) Fuel cell technologies Part 1:Terminology
TC 106 IEC 61786-1:2013 ( Ed 1.0 ) Measurement of DC magnetic fields, AC magnetic and electric fields from 1 Hz to 100 kHz with regard to exposure of human beings Part 1:Requirements for measuring instruments
TC 110 IEC 62715-1-1:2013 ( Ed 1.0 ) Flexible display devices Part 1-1:Terminology and letter symbols
TC 112 IEC 60243-2:2013 ( Ed 3.0 ) Electric strength of insulating materials - Test methods Part 2:Additional requirements for tests using direct voltage
TC 112 IEC 60243-3:2013 ( Ed 3.0 ) Electric strength of insulating materials - Test methods Part 3:Additional requirements for 1,2/50 µs impulse tests
TC 115 IEC/TS 62672-1:2013 ( Ed 1.0 ) Reliability and availability evaluation of HVDC systems Part 1:HVDC systems with line commutated converters
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 21 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
ISO
TC 22 ISO 23273:2013 ( Ed 1.0 ) Fuel cell road vehicles - Safety specifications - Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen
TC 22 ISO 23273-2:2006 ( Ed 1 ) Fuel cell road vehicles Safety specifications Part 2: Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen
TC 22 ISO 23828:2013 ( Ed 2.0 ) Fuel cell road vehicles - Energy consumption measurement - Vehicles fuelled with compressed hydrogen
TC 35 ISO 16927:2014 ( Ed 1 ) Paints and varnishes Determination of the overcoatability and recoatability of a coating
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 22 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
4. Projetos de normas portuguesas
Os projetos de normas estão organizadas por Grupos classificativos, indicando-se a referência e o respetivo título.
4.1 Projetos em inquérito público
Para cada referência menciona-se a designação codificada, o título e a correspondência europeia ou internacional, quando exista, e a data limite para a apresentação de comentários.
E100 / CTE 1 prNP 2626-561:2014 Preço: 0,00 EUR Vocabulário Eletrotécnico Internacional Capítulo 561: Dispositivos piezoelétricos, dielétricos e eletrostáticos e materiais associados para a deteção, a seleção e o controlo de frequência Data de Início do Inquerito: 2014-02-18 Data de Fim do Inquerito: 2014-03-20
E100 / CTE 1 prNP 2626-901:2014 Preço: 0,00 EUR Vocabulário Eletrotécnico Internacional Capítulo 901: Normalização Data de Início do Inquerito: 2014-02-18 Data de Fim do Inquerito: 2014-03-20
E100 / CTE 1 prNP 2626-902:2014 Preço: 0,00 EUR Vocabulário Eletrotécnico Internacional Capítulo 902: Avaliação da conformidade Data de Início do Inquerito: 2014-02-18 Data de Fim do Inquerito: 2014-03-20
C1010 / CT 101 prNP 4524:2014 Preço: 0,00 EUR Postos de enchimento de gás natural Estações GNL para abastecimento de meios de transporte Data de Início do Inquerito: 2014-02-18 Data de Fim do Inquerito: 2014-03-20
C1010 / CT 101 prNP 4525:2014 Preço: 0,00 EUR Postos de enchimento de gás natural Estações GNC para abastecimento de meios de transporte Data de Início do Inquerito: 2014-02-18 Data de Fim do Inquerito: 2014-03-20
C1440 / CT 144 prNP 4523:2014 Preço: 0,00 EUR Turismo Acessível Estabelecimentos hoteleiros Data de Início do Inquerito: 2014-02-18 Data de Fim do Inquerito: 2014-03-20
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 23 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
4.2 Projetos anulados
Para cada referência menciona-se a designação, a correspondência europeia e/ou internacional, bem como o documento que o substitui, quando exista.
LISTA VAZIA
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 24 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
5. Projetos de normas e propostas de estudo de novas normas do Comité Europeu de Normalização(CEN e do Comité Europeu para a Normalização do Ferro e do Aço (ECISS)
Os projetos de normas e as propostas de estudo de novas normas estão organizadas por "Comités" Técnicos do CEN e do ECISS.
5.1 Projetos em inquérito público
Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários. prEN 1434-4:2014 and use of die form monolithic microwave integrated Heat meters Part 4: Pattern approval tests circuits (MMICs) Data Limite: 2014-07-06 Data Limite: 2014-02-12
TC 5 TC 5 prEN 16602-20:2013 prEN 16602-60-14:2013 Space product assurance Quality assurance Space product assurance Relifing procedure EEE Data Limite: 2014-02-05 components Data Limite: 2014-02-12 TC 5 prEN 16602-20-10:2013 TC 5 Space product assurance Off-the-shelf items utilization prEN 16602-60-15:2013 in space systems Space product assurance Radiation hardness assurance Data Limite: 2014-02-05 EEE components Data Limite: 2014-02-12 TC 5 prEN 16602-30-02:2013 TC 5 Space product assurance Failure modes, effects (and prEN 16602-70-01:2013 criticality) analysis (FMEA/FMECA) Space product assurance Cleanliness and contamination Data Limite: 2014-02-05 control Data Limite: 2014-02-12 TC 5 prEN 16602-30-09:2013 TC 5 Space product assurance Availability analysis prEN 16602-70-02:2013 Data Limite: 2014-02-05 Space product assurance Thermal vacuum outgassing test for the screening of space materials TC 5 Data Limite: 2014-02-12 prEN 16602-30-11:2013 Space product assurance Derating EEE components TC 5 Data Limite: 2014-02-12 prEN 16602-70-03:2013 Space product assurance Black-anodizing of metals with TC 5 inorganic dyes prEN 16602-40-02:2013 Data Limite: 2014-02-19 Space product assurance Hazard analysis Data Limite: 2014-02-12 TC 5 prEN 16602-70-04:2013 TC 5 Space product assurance Thermal testing for the prEN 16602-40-12:2013 evaluation of space materials, processes, mechanical Space product assurance Fault tree analysis Adoption parts and assemblies notice ECSS/IEC 61025 Data Limite: 2014-02-19 Data Limite: 2014-02-12 TC 5 TC 5 prEN 16602-70-05:2013 prEN 16602-60-02:2013 Space product assurance Detection of organic Space product assurance ASIC and FPGA development contamination surfaces by infrared spectroscopy Data Limite: 2014-02-20 Data Limite: 2014-02-19
TC 5 TC 5 prEN 16602-60-05:2013 prEN 16602-70-06:2013 Space product assurance Generic procurement Space product assurance Particle and UV radiation testing requirements for hybrids for space materials Data Limite: 2014-02-12 Data Limite: 2014-02-19
TC 5 TC 5 prEN 16602-60-12:2013 prEN 16602-70-07:2013 Space product assurance Design, selection, procurement Space product assurance Verification and approval of Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 25 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos automatic machine wave soldering frame protocol Data Limite: 2014-02-19 Data Limite: 2014-03-10
TC 5 TC 5 prEN 16602-70-18:2013 prEN 16603-50-04:2013 Space product assurance Preparation, assembly and Space engineering Space data links Telecommand mounting of RF coaxial cables protocols, synchronization and channel coding Data Limite: 2014-03-10 Data Limite: 2014-03-24
TC 5 TC 5 prEN 16602-70-20:2013 prEN 16603-70-32:2013 Space product assurance Determination of the Space engineering Test and operations procedure susceptibility of silver-plated copper wire and cable to language "red-plague" corrosion Data Limite: 2014-02-05 Data Limite: 2014-03-10 TC 12 TC 5 prEN ISO 13702:2013 prEN 16602-70-21:2013 Petroleum and natural gas industries Control and Space product assurance Flammability testing for the mitigation of fires and explosions on offshore screening of space materials production installations Requirements and guidelines Data Limite: 2014-03-10 (ISO/DIS 13702:2013) Data Limite: 2014-02-05 TC 5 prEN 16602-70-22:2013 TC 12 Space product assurance Control of limited shelf-life prEN ISO 17824:2014 materials Petroleum and natural gas industries Downhole Data Limite: 2014-03-10 equipment Sand screens (ISO 17824:2009) TC 5 Data Limite: 2014-06-30 prEN 16602-70-26:2013 Space product assurance Crimping of high-reliability TC 12 electrical connections prEN ISO 19901-5:2013 Data Limite: 2014-03-10 Petroleum and natural gas industries Specific requirements for offshore structures Part 5: Weight TC 5 control during engineering and construction prEN 16602-70-28:2013 (ISO/DIS 19901-5:2013) Space product assurance Repair and modification of Data Limite: 2014-03-03 printed circuit board assemblies for space use Data Limite: 2014-03-10 TC 19 prEN 14078:2014 TC 5 Liquid petroleum products Determination of fatty methyl prEN 16602-70-29:2013 ester (FAME) content in middle distillates Infrared Space product assurance Determination of offgassing spectrometry method products from materials and assembled articles to be Data Limite: 2014-03-09 used in a manned space vehicle crew compartment Data Limite: 2014-03-10 TC 19 prEN 16270:2014 TC 5 Automotive fuels Determination of high-boiling prEN 16602-70-30:2013 components including fatty acid methyl esters in petrol Space product assurance Wire wrapping of and ethanol (E85) automotive fuel Gas chromatography high-reliability electrical connections method Data Limite: 2014-03-10 Data Limite: 2014-07-06
TC 5 TC 19 prEN 16602-70-31:2013 prEN 16476:2013 Space product assurance Application of paints and Liquid Petroleum products Determination of Sodium, coatings on space hardware Potassium, Calcium, Phosphorus, Copper and Zinc Data Limite: 2014-03-10 contents in diesel fuel Methold via Inductively Coupled Plasma Optical Emission Spectrometry TC 5 (ICP-OES) prEN 16602-70-36:2013 Data Limite: 2014-02-19 Space product assurance Material selection for controlling stress-corrosion cracking TC 19 Data Limite: 2014-03-10 prEN 16709:2014 Automotive fuels High FAME diesel fuel (B20 or B30) TC 5 Requirements and test methods prEN 16603-50-01:2013 Data Limite: 2014-07-06 Space engineering Space data links Telemetry synchronization and channel coding TC 19 Data Limite: 2014-03-10 prEN ISO 4263-3:2013 Petroleum and related products Determination of the TC 5 ageing behaviour of inhibited oils and fluids using the prEN 16603-50-03:2013 TOST test Part 3: Anhydrous procedure for synthetic Space engineering Space data links Telemetry transfer hydraulic fluids
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 26 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos (ISO/DIS 4263-3:2013) (ISO/FDIS 23553-1:2014) Data Limite: 2014-02-26 Data Limite: 2014-03-09
TC 19 TC 52 prEN ISO 6743-4:2013 prCEN/TR 15371:2013 Lubricants, industrial oils and related products (class L) Safety of toys Replies to requests for interpretation of Classification Part 4: Family H (Hydraulic systems) EN 71-1, EN 71-2, and EN 71-8 (ISO/DIS 6743-4:2013) Data Limite: 2014-03-19 Data Limite: 2014-03-03 TC 54 TC 19 EN 13445-6:2009 /prA 1:2013 prEN ISO 20844:2014 Unfired pressure vessels Part 6: Requirements for the Petroleum and related products Determination of the shear design and fabrication of pressure vessels and pressure stability of polymer-containing oils using a diesel parts onstructed from spheroidal graphite cast iron injector nozzle Data Limite: 2014-05-12 (ISO/DIS 20844:2014) Data Limite: 2014-06-16 TC 55 prEN ISO 4823:2013 TC 23 Dentistry Elastomeric impression materials prEN ISO 17871:2014 (ISO/DIS 4823:2013) Gas cylinders Quick opening valves Specification and Data Limite: 2014-03-10 type testing (ISO/DIS 17871:2014) TC 55 Data Limite: 2014-06-16 prEN ISO 9173-3:2014 Dentistry Extraction forceps Part 3: Design and TC 23 dimensions EN ISO 28927-8:2009 /prA 1:2013 (ISO/FDIS 9173-3:2014) Hand-held portable power tools Test methods for Data Limite: 2014-03-16 evaluation of vibration emission Part 8: Saws, polishing and filing machines with reciprocating action and small TC 55 saws with oscillating or rotating action - Amendment 1: prEN ISO 11499:2014 Polishing machines, modified feed forces Dentistry Single-use cartridges for local anaesthetics (ISO 28927 8:2009/DAM 1:2013) (ISO/FDIS 11499:2014) Data Limite: 2014-04-28 Data Limite: 2014-03-23
TC 33 TC 55 prEN 12211:2013 EN ISO 12836:2012 /prA 1:2014 Windows and doors Resistance to wind load Test method Dentistry Digitizing devices for CAD/CAM systems for Data Limite: 2014-03-03 indirect dental restorations Test methods for assessing accuracy TC 33 (ISO 12836:2012/DAM 1:2014) prEN 12608-1:2013 Data Limite: 2014-06-09 Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors Classification, TC 55 requirements and test methods Part 1: Non-coated PVC-U EN ISO 13017:2012 /prA 1:2013 profiles with light coloured surfaces Dentistry Magnetic attachments Data Limite: 2014-04-28 (ISO 13017:2012/DAM 1:2013) Data Limite: 2014-04-28 TC 33 prEN 16034:2014 TC 55 Pedestrian doorsets, industrial, commercial, garage prEN ISO 13397-5:2013 doors and openable windows Product standard, performance Dentistry Periodontal curettes, dental scalers and characteristics Fire resisting and/or smoke control excavators Part 5: Jacquette scalers characteristics (ISO/DIS 13397-5:2013) Data Limite: 2014-07-06 Data Limite: 2014-05-12
TC 44 TC 55 prEN ISO 23953-1:2014 prEN ISO 16635-1:2013 Refrigerated display cabinets Part 1: Vocabulary Dentistry Dental rubber dam technique Part 1: Hole (ISO/DIS 23953-1:2014) punch Data Limite: 2014-06-09 (ISO 16635-1:2013) Data Limite: 2014-03-24 TC 44 prEN ISO 23953-2:2013 TC 55 Refrigerated display cabinets Part 2: Classification, prEN ISO 22674:2014 requirements and test conditions Dentistry Metallic materials for fixed and removable (ISO/DIS 23953-2:2013) restorations and appliances Data Limite: 2014-04-28 (ISO/DIS 22674:2014) Data Limite: 2014-06-16 TC 47 prEN ISO 23553-1:2014 TC 58 Safety and control devices for oil burners and prEN 14459:2013 oil-burning appliances Particular requirements Part 1: Safety and control devices for burners and appliances Automatic and semi-automatic valves burning gaseous or liquid fuels Control functions in
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 27 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos electronic systems Methods for classification and prEN ISO 15758:2013 assessment Hygrothermal performance of building equipment and Data Limite: 2014-02-05 industrial installations Calculation of water vapour diffusion - Cold pipe insulation systems TC 58 (ISO/FDIS 15758:2013) prEN 16678:2013 Data Limite: 2014-02-19 Safety and control devices for gas burners and gas burning appliances Automatic shut-off valves for TC 102 operating pressure of above 500 kPa up to and including prCEN/TR 10317:2014 6300 kPa European certified reference materials (EURONORM-CRMs) Data Limite: 2014-02-26 for the determination of the chemical composition of iron and steel products prepared under the auspices of TC 67 the European Committee for Iron and Steel prEN ISO 10545-8:2014 Standardization (ECISS) Ceramic tiles Part 8: Determination of linear thermal Data Limite: 2014-04-09 expansion (ISO/FDIS 10545-8:2014) TC 102 Data Limite: 2014-04-06 prEN 1422:2014 Sterilizers for medical purposes Ethylene oxide TC 69 sterilizers Requirements and test methods prEN 16668:2013 Data Limite: 2014-03-16 Industrial valves Requirements and testing for metallic valves as pressure accessories TC 102 Data Limite: 2014-03-03 prEN 14180:2014 Sterilizers for medical purposes Low temperature steam TC 69 and formaldehyde sterilizers Requirements and testing prEN ISO 15848-1:2014 Data Limite: 2014-03-09 Industrial valves Measurement, test and qualification procedures for fugitive emissions Part 1: Classification TC 102 system and qualification procedures for type testing of prEN 16442:2013 valves Controlled environment storage cabinet for disinfected (ISO/DIS 15848-1:2014) thermolabile endoscopes Data Limite: 2014-06-23 Data Limite: 2014-02-14
TC 69 TC 107 prEN ISO 15848-2:2014 EN 253-:2009+A1:2013 /prA 2:2013 Industrial valves Measurement, test and qualification District heating pipes Preinsulated bonded pipe systems procedures for fugitive emissions Part 2: Production for directly buried hot water networks Pipe assembly of acceptance test of valves steel service pipe, polyurethane thermal insulation and (ISO/DIS 15848-2:2014) outer casing of polyethylene Data Limite: 2014-06-23 Data Limite: 2014-05-12
TC 70 TC 107 prEN 3-8:2013 prEN 15698-2:2013 Portable fire extinguishers Part 8: Requirements for the District heating pipes Preinsulated bonded twin pipe construction, pressure resistance and mechanical tests systems for directly buried hot water networks Part 2: for extinguishers with a maximum allowable pressure Fitting and valve assembly of steel service pipes, equal to or lower than 30 bar, which comply with the polyurethane thermal insulation and outer casing of requirements of EN 3-7 polyethylene Data Limite: 2014-05-05 Data Limite: 2014-04-28
TC 70 TC 109 prEN 1866-2:2013 EN 15502-2-1:2012 /prA 1:2014 Mobile fire extinguishers Part 2: Requirements for the Gas-fired central heating boilers Part 2-1: Specific construction, pressure resistance and mechanical tests standard for type C appliances and type B2, B3 and B5 for extinguishers, with a maximum allowable pressure appliances of a nominal heat input not exceeding 1 000 equal to or lower than 30 bar, which comply with the kW requirements of EN 1866-1 Data Limite: 2014-07-06 Data Limite: 2014-02-19 TC 112 TC 72 EN 326-2:2010 /prA 1:2014 prEN 54-3:2013 Wood-based panels Sampling, cutting and inspection Part Fire detection and fire alarm systems Part 3: Fire alarm 2: Initial type testing and factory production control devices - Sounders Data Limite: 2014-06-16 Data Limite: 2014-04-07 TC 112 TC 85 prEN ISO 12460-3:2013 prEN ISO 12312-2:2013 Wood-based panels Determination of formaldehyde Eye and face protection Sunglasses and related eyewear release Part 3: Gas analysis method Part 2: Filters for direct observation of the sun (ISO/DIS 12460-3:2013) (ISO/DIS 12312-2:2013) Data Limite: 2014-04-21 Data Limite: 2014-03-31 TC 112 TC 89 prEN ISO 12460-5:2013
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 28 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos Wood-based panels Determination of formaldehyde release Equipment for capture and separation of welding fume Part 5: Extraction method (called the perforator method) Part 4: Design requirements (ISO/DIS 12460-5:2013) (ISO/DIS 15012-4:2013) Data Limite: 2014-04-21 Data Limite: 2014-02-05
TC 114 TC 121 prEN ISO 14122-2:2013 prEN ISO 15614-1:2013 Safety of machinery Permanent means of access to Specification and qualification of welding procedures machinery Part 2: Working platforms and walkways for metallic materials Welding procedure test Part 1: (ISO/DIS 14122-2:2013) Arc and gas welding of steels and arc welding of nickel Data Limite: 2014-04-28 and nickel alloys (ISO/DIS 15614-1:2013) Data Limite: 2014-02-05 TC 114 prEN ISO 14122-3:2013 TC 121 Safety of machinery Permanent means of access to prEN ISO 15614-7:2013 machinery Part 3: Stairs, stepladders and guard-rails Specification and qualification of welding procedures for (ISO/DIS 14122-3:2013) metallic materials Welding procedure test Part 7: Data Limite: 2014-05-12 Overlay welding (ISO/DIS 15614-7:2013) TC 114 Data Limite: 2014-02-26 prEN ISO 14122-4:2014 Safety of machinery Permanent means of access to TC 121 machinery Part 4: Fixed ladders prEN ISO 15614-8:2014 (ISO/DIS 14122-4:2014) Specification and qualification of welding procedures for Data Limite: 2014-06-16 metallic materials Welding procedure test Part 8: Welding of tubes to tube-plate joints TC 121 (ISO/DIS 15614-8:2014) prEN ISO 636:2013 Data Limite: 2014-06-16 Welding consumables Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain TC 121 steels Classification prEN ISO 17632:2013 (ISO/DIS 636:2013) Welding consumables Tubular cored electrodes for gas Data Limite: 2014-02-26 shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels Classification TC 121 (ISO/DIS 17632:2013) prEN ISO 3834-5:2014 Data Limite: 2014-02-26 Quality requirements for fusion welding of metallic materials Part 5: Documents with which it is necessary TC 121 to conform to claim conformity to the quality prEN ISO 18278-1:2013 requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 Resistance welding Weldability Part 1: Assessment of (ISO/DIS 3834-5:2014) weldability for resistance spot, seam and projection Data Limite: 2014-06-16 welding of metallic materials (ISO/DIS 18278-1:2013) Data Limite: 2014-02-26 TC 121 prEN ISO 9454-1:2014 TC 123 Soft soldering fluxes Classification and requirements Part prEN ISO 11145:2014 1: Classification, labelling and packaging Optics and photonics Lasers and laser-related (ISO/DIS 9454-1:2014) equipment Vocabulary and symbols Data Limite: 2014-06-09 (ISO/DIS 11145:2014) Data Limite: 2014-07-06 TC 121 prEN ISO 14114:2013 TC 123 Gas welding equipment Acetylene manifold systems for prEN ISO 13694:2014 welding, cutting and allied processes General Optics and optical instruments Lasers and laser-related requirements equipment Test methods for laser beam power (energy) (ISO/FDIS 14114:2013) density distribution Data Limite: 2014-02-05 (ISO/DIS 13694:2014) Data Limite: 2014-06-30 TC 121 prEN ISO 14172:2013 TC 124 Welding consumables Covered electrodes for manual metal prEN 14081-1:2013 arc welding of nickel and nickel alloys Classification Timber structures Strength graded structural timber with (ISO/DIS 14172:2013) rectangular cross section Part 1: General requirements Data Limite: 2014-02-26 Data Limite: 2014-03-17
TC 121 TC 126 prEN ISO 14555:2013 prEN 16703:2014 Welding Arc stud welding of metallic materials Acoustics Test code for drywall systems of plasterboard (ISO/FDIS 14555:2013) with steel studs Airborne sound insulation Data Limite: 2014-02-19 Data Limite: 2014-06-16
TC 121 TC 126 prEN ISO 15012-4:2013 EN ISO 10140-1:2010 /prA 2:2013 Health and safety in welding and allied processes Acoustics Laboratory measurement of sound insulation of
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 29 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos building elements Part 1: Application rules for specific TC 129 products - Amendment 2: Rainfall sound prEN 12150-1:2013 (ISO 10140-1:2010/FDAM 2:2013) Glass in building Thermally toughened soda lime silicate Data Limite: 2014-02-19 safety glass Part 1: Definition and description Data Limite: 2014-04-12 TC 126 EN ISO 10140-3:2010 /prA 2:2013 TC 129 Acoustics Laboratory measurement of sound insulation prEN 15752-1:2013 of building elements Part 3: Measurement of impact Glass in building Adhesive backed polymeric film Part sound insulation - Amendment 2 1: Definitions and requirements (ISO 10140-3:2010/DAM 2:2013) Data Limite: 2014-04-14 Data Limite: 2014-02-05 TC 129 TC 126 prEN 15755-1:2013 EN ISO 10140-5:2010 /prA 1:2013 Glass in building Adhesive backed polymeric filmed Acoustics Laboratory measurement of sound insulation of glass Part 1: Definitions and requirements building elements Part 5: Requirements for test Data Limite: 2014-04-14 facilities and equipment - Amendment 1: Rainfall noise (ISO 10140-5:2010/FDAM 1:2013) TC 129 Data Limite: 2014-02-19 prEN ISO 1288-1:2014 Glass in building Determination of the bending strength TC 126 of glass Part 1: Fundamentals of testing glass prEN ISO 12999-1:2014 (ISO/DIS 1288-1:2014 Acoustics Determination and application of measurement Data Limite: 2014-06-09 uncertainties in building acoustics Part 1: Sound insulation TC 129 (ISO/FDIS 12999-1:2014) prEN ISO 1288-2:2014 Data Limite: 2014-03-16 Glass in building Determination of the bending strength of glass Part 2: Coaxial double-ring test on flat specimens TC 126 with large test surface areas prEN ISO 16251-1:2014 (ISO/DIS 1288-2:2014) Acoustics Laboratory measurement of the reduction of Data Limite: 2014-06-09 transmitted impact noise by floor coverings on a small floor mock-up Part 1: Heavyweight compact floor TC 129 (ISO/FDIS 16251-1:2014) prEN ISO 1288-3:2014 Data Limite: 2014-03-23 Glass in building Determination of the bending strength of glass Part 3: Test with specimen supported at two TC 126 points (four-point bending) prEN ISO 16283-2:2013 (ISO/DIS 1288-3:2014) Acoustics Field measurement of sound insulation in Data Limite: 2014-06-09 buildings and of building elements Part 2: Impact sound insulation TC 129 (ISO/DIS 16283-2:2013) prEN ISO 1288-4:2014 Data Limite: 2014-03-10 Glass in building Determination of the bending strength of glass Part 4: Testing of channelshaped glass TC 127 (ISO/DIS 1288-4:2014) prEN 1366-1:2013 Data Limite: 2014-06-09 Fire resistance tests for service installations Part 1: Ventilation ducts TC 129 Data Limite: 2014-05-12 prEN ISO 1288-5:2014 Glass in building Determination of the bending strength of TC 127 glass Part 5: Coaxial double-ring test on flat specimens prEN 1366-12:2013 with small test surface areas Fire resistance tests for service installations Part 12: (ISO/DIS 1288-5:2014) Non-mechanical fire barrier for ventilation ductwork Data Limite: 2014-06-09 Data Limite: 2014-05-12 TC 132 TC 127 prEN 851:2013 prEN 15269-5:2014 Aluminium and aluminium alloys Circle and circle stock Extended application of test results for fire resistance for the production of culinary utensils Specifications and/or smoke control for door, shutter and openable Data Limite: 2014-02-12 window assesmblies, including their elements of building hardware Part 5: Fire resistance of hinged and TC 132 pivoted metal framed glazed doorsets and openable prEN 941:2013 windows Aluminium and aluminium alloys Circle and circle stock Data Limite: 2014-03-16 for general application Specifications Data Limite: 2014-02-12 TC 128 prEN 12326-1:2014 TC 132 Slate and stone for discontinuous roofing and external prEN 1559-4:2013 cladding Part 1: Specifications for slate and carbonate Founding Technical conditions of delivery Part 4: slate Additional requirements for aluminium alloy castings Data Limite: 2014-06-09 Data Limite: 2014-02-05
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 30 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos TC 133 Playing field equipment Lightweight goals Functional, prEN 12420:2014 safety requirements and test methods Copper and copper alloys Forgings Data Limite: 2014-02-12 Data Limite: 2014-03-23 TC 137 TC 133 prEN 13205-1:2014 prEN 15063-1:2013 Workplace exposure Assessment of sampler performance Copper and copper alloys Determination of main for measurement of airborne particle concentrations Part constituents and impurities by wavelength dispersive 1: General requirements X-ray fluorescence spectrometry (XRF) Part 1: Data Limite: 2014-04-06 Guidelines to the routine method Data Limite: 2014-03-03 TC 137 prEN 13205-2:2014 TC 133 Workplace exposure Assessment of sampler performance prEN 15703-2:2013 for measurement of airborne particle concentrations Part Copper and copper alloys Determination of manganese 2: Laboratory performance test based on determination content Part 2: Flame atomic absorption spectrometric of sampling efficiency method (FAAS) Data Limite: 2014-04-06 Data Limite: 2014-03-03 TC 137 TC 134 prEN 13205-4:2014 prEN 1307:2013 Workplace exposure Assessment of sampler performance Textile floor coverings Classification for measurement of airborne particle concentrations Part Data Limite: 2014-02-12 4: Laboratory performance test based on comparison of concentrations TC 134 Data Limite: 2014-04-06 prEN 13329:2013 Laminate floor coverings - Elements with a surface layer TC 137 based on aminoplastic thermosetting resins prEN 13205-5:2014 Specifications, requirements and test methods Workplace exposure Assessment of sampler performance Data Limite: 2014-03-31 for measurement of airborne particle concentrations Part 5: Aerosol sampler performance test and sampler TC 134 comparison carried out at workplaces prEN 14978:2013 Data Limite: 2014-04-06 Laminate floor coverings Elements with acrylic based surface layer, electron beam cured Specifications, TC 137 requirements and test methods prEN 13205-6:2014 Data Limite: 2014-03-17 Workplace exposure Assessment of sampler performance for measurement of airborne particle concentrations Part TC 134 6: Transport and handling tests prEN 15468:2013 Data Limite: 2014-04-06 Laminate floor coverings Elements with directly applied printing and resin surface layer Specifications, TC 137 requirements and test methods prEN ISO 17621:2014 Data Limite: 2014-03-31 Atmosphères des lieux de travail Systèmes de mesurage par tube détecteur à court terme Exigences et méthodes TC 136 d'essai prEN 926-1:2014 (ISO/DIS 17621:2014) Paragliding equipment Paragliders Part 1: Requirements Data Limite: 2014-06-09 and test methods for structural strength Data Limite: 2014-06-09 TC 138 prEN 16696:2013 TC 136 Non-destructive testing Acoustic emission Leak prEN 12491:2014 detection by means of acoustic emission Paragliding equipment Emergency parachutes Safety Data Limite: 2014-05-12 requirements and test methods Data Limite: 2014-06-09 TC 138 prEN ISO 12707:2013 TC 136 Non-destructive testing Terminology Terms used in prEN 13451-2:2013 magnetic particle testing Swimming pool equipment Part 2: Additional specific (ISO/DIS 12707:2013) safety requirements and test methods for ladders, Data Limite: 2014-05-05 stepladders and handle bends Data Limite: 2014-02-26 TC 139 prCEN/TS 16700:2014 TC 136 Paints and varnishes Coating materials and coating EN 13451-3:2011 /prA 2:2013 systems for exterior wood Assessment of resistance to Swimming pool equipment Part 3: Additional specific impact of a coating on a wooden substrate safety requirements and test methods for inlets and Data Limite: 2014-04-16 outlets and water/air based water leisure features Data Limite: 2014-02-05 TC 139 prEN 13523-0:2014 TC 136 Coil coated metals Test methods Part 0: General prEN 16664:2013 introduction
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 31 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos Data Limite: 2014-04-06 Paints and varnishes Laboratory method for testing the efficacy of film preservatives in a coating against algae TC 139 Data Limite: 2014-06-09 prEN 13523-2:2014 Coil coated metals Test methods Part 2: Gloss TC 139 Data Limite: 2014-04-06 prEN 16492:2014 Paints and varnishes Evaluation of the surface TC 139 disfigurement caused by fungi and algae on coatings prEN 13523-3:2014 Data Limite: 2014-03-30 Coil coated metals Test methods Part 3: Colour difference - Instrumental comparison TC 139 Data Limite: 2014-04-06 prEN 16566:2014 Paints and varnishes Fillers for internal and/or external TC 139 works Adaptation of fillers to European standards prEN 13523-5:2014 Data Limite: 2014-03-16 Coil coated metals Test methods Part 5: Resistance to rapid deformation (impact test) TC 139 Data Limite: 2014-04-06 prEN ISO 3233-2:2014 Paints and varnishes Determination of the percentage TC 139 volume of non-volatile matter Part 2:Method using the prEN 13523-7:2014 determination of non-volatile-matter content in Coil coated metals Test methods Part 7: Resistance to accordance with ISO 3251 and determination of dry film cracking on bending (T-bend test) density on coated test panels by the Archimedes principle Data Limite: 2014-04-06 (ISO/FDIS 3233-2:2014) TC 139 Data Limite: 2014-03-16 prEN 13523-9:2014 Coil coated metals Test methods Part 9: Resistance to TC 139 water immersion prEN ISO 3233-3:2013 Data Limite: 2014-04-06 Paints and varnishes Determination of the percentage volume of non-volatile matter Part 3: Determination by TC 139 calculation from the non-volatile-matter content prEN 13523-13:2014 determined in accordance with ISO 3251, the density of Coil coated metals Test methods Part 13: Resistance to the coating material and the density of the solvent in the accelerated ageing by the use of heat coating Data Limite: 2014-04-06 material (ISO/DIS 3233-3:2013) TC 139 Data Limite: 2014-03-17 prEN 13523-14:2014 Coil coated metals Test methods Part 14: Chalking TC 139 (Helmen method) prEN ISO 8502-2:2013 Data Limite: 2014-04-06 Preparation of steel substrates before application of paints and related products Tests for the assessment of TC 139 surface cleanliness Part 2: Laboratory determination of prEN 13523-15:2014 chloride on cleaned surfaces Coil coated metals Test methods Part 15: Metamerism (ISO/DIS 8502-2:2013) Data Limite: 2014-06-09 Data Limite: 2014-03-03
TC 139 TC 139 prEN 13523-23:2014 prEN ISO 8502-12:2013 Coil coated metals Test methods Part 23: Resistance to Preparation of steel substrates before application of humid atmospheres containing sulfur dioxide paints and related products Tests for the assessment of Data Limite: 2014-06-09 surface cleanliness Part 12: Field method for the titrimetric determination of water-soluble ferrous ions TC 139 (ISO/DIS 8502-12:2013) prEN 13523-25:2014 Data Limite: 2014-03-03 Coil coated metals Test methods Part 25: Resistance to humidity TC 139 Data Limite: 2014-04-06 prEN ISO 15181-6:2013 Paints and varnishes Determination of release rate of TC 139 biocides from antifouling paints Part 6: Determination of prEN 13523-26:2014 tralopyril release rate by quantitation of its degradation Coil coated metals Test methods Part 26: Resistance to product in the extract (ISO 15181-6:2012) condensation of water Data Limite: 2014-04-07 Data Limite: 2014-04-06 TC 142 TC 139 prEN 12779:2014 prEN 15457:2014 Safety of woodworking machines Chip and dust extraction Paints and varnishes Laboratory method for testing the systems with fixed installation Safety requirements efficacy of film preservatives in a coating against fungi Data Limite: 2014-06-16 Data Limite: 2014-06-09 TC 142 TC 139 prEN ISO 18217:2014 prEN 15458:2014 Safety of woodworking machines Edge-banding machines
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 32 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos fed chain(s) (ISO/DIS 18217:2014) TC 151 Data Limite: 2014-06-16 prEN 12111:2013 Tunnelling machines Road headers and continuous TC 143 miners Safety requirements prEN ISO 6103:2013 Data Limite: 2014-02-19 Bonded abrasive products Permissible unbalances of grinding wheels as delivered Static testing TC 151 (ISO/DIS 6103:2013) prEN 16191:2014 Data Limite: 2014-02-05 Tunnelling machinery Safety requirements Data Limite: 2014-03-09 TC 143 prEN ISO 16089:2014 TC 151 Machine tools Safety Stationary grinding machines prEN 16228-1:2013 (ISO/DIS 16089:2014) Drilling and foundation equipment Safety Part 1: Data Limite: 2014-06-16 Common requirements Data Limite: 2014-02-05 TC 143 prEN ISO 16093:2014 TC 151 Machine tools Safety Sawing machines for cold metal prEN 16228-2:2013 (ISO/DIS 16093:2014) Drilling and foundation equipment Safety Part 2: Mobile Data Limite: 2014-06-16 drill rigs for civil and geotechnical engineering, quarrying and mining TC 144 Data Limite: 2014-02-05 EN 15694:2009 /prA 1:2013 Agricultural and forestry tractors Passenger seat TC 151 Requirements and test procedures prEN 16228-3:2013 Data Limite: 2014-04-07 Drilling and foundation equipment Safety Part 3: Horizontal directional drilling equipment (HDD) TC 144 Data Limite: 2014-02-05 prEN 16666:2013 Self-propelled agricultural machines Road safety Basic TC 151 requirements prEN 16228-4:2013 Data Limite: 2014-03-03 Drilling and foundation equipment Safety Part 4: Foundation equipment TC 144 Data Limite: 2014-02-05 prEN ISO 16230-1:2013 Agricultural machinery and tractors - Safety of higher TC 151 voltage electrical and electronic components and systems prEN 16228-5:2013 Part 1: General requirements Drilling and foundation equipment Safety Part 5: (ISO/DIS 16230-1:2013) Diaphragm walling equipment Data Limite: 2014-05-19 Data Limite: 2014-02-05
TC 144 TC 151 prEN ISO 17962:2013 prEN 16228-6:2013 Agricultural machinery Equipment for sowing Drilling and foundation equipment Safety Part 6: Minimization of the environmental effects of fan Jetting, grouting and injection equipment exhaust from pneumatic systems Data Limite: 2014-02-05 (ISO/DIS 17962:2013) Data Limite: 2014-04-21 TC 151 prEN 16228-7:2013 TC 145 Drilling and foundation equipment Safety Part 7: prEN 289:2014 Interchangeable auxiliary equipment Plastics and rubber machines Compression moulding Data Limite: 2014-02-05 machines and transfer moulding machines Safety requirements TC 153 Data Limite: 2014-03-23 prEN 13870:2013 Food processing machinery Portion cutting machines TC 147 Safety and hygiene requirements prEN 13001-3-5:2013 Data Limite: 2014-05-05 Cranes General design Part 3-5: Limit states and proof of competence of forged hooks TC 155 Data Limite: 2014-02-12 prEN ISO 6259-1:2013 Thermoplastics pipes Determination of tensile properties TC 150 Part 1: General test method prEN 1459-2:2013 (ISO/DIS 6259-1:2013) Rough-terrain trucks Safety requirements and verification Data Limite: 2014-02-26 Part 2: Slewing variable-reach trucks Data Limite: 2014-03-31 TC 155 prEN ISO 6259-3:2013 TC 151 Thermoplastics pipes Determination of tensile properties prEN 12110:2013 Part 3: Polyolefin pipes Tunnelling machines Air locks Safety requirements (ISO/DIS 6259-3:2013) Data Limite: 2014-02-05 Data Limite: 2014-02-26
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 33 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos Wash basins Connecting dimensions TC 155 Data Limite: 2014-02-07 EN ISO 10931:2005 /prA 1:2013 Plastics piping systems for industrial applications TC 163 Poly(vinylidene fluoride) (PVDF) Specifications for prEN 35:2014 components and the system Pedestal and wall-hung bidets with over-rim supply (ISO 10931:2005/DAM 1:2013) Connecting dimensions Data Limite: 2014-02-26 Data Limite: 2014-03-09
TC 155 TC 164 prEN ISO 17778:2013 prEN 1017:2013 Plastics piping systems Fittings, valves and ancillaries Chemicals used for treatment of water intended for Determination of gaseous flow rate/pressure drop human consumption Half-burnt dolomite relationships Data Limite: 2014-05-19 (ISO/DIS 17778:2013) Data Limite: 2014-04-07 TC 164 prEN 12518:2013 TC 161 Chemicals used for treatment of water intended for prEN ISO 20346:2014 human consumption High-calcium lime Personal protective equipment Protective footwear Data Limite: 2014-05-19 (ISO/FDIS 20346:2014) Data Limite: 2014-03-16 TC 164 prEN 15362:2013 TC 162 Chemicals used for treatment of swimming pool water prEN 469:2014 Sodium carbonate Protective clothing for firefighters Performance Data Limite: 2014-02-19 requirements for protective clothing for firefighting Data Limite: 2014-04-06 TC 164 prEN 15363:2013 TC 162 Chemicals used for treatment of swimming pool water prEN 13911:2013 Chlorine Protective clothing for firefighters Requirements and test Data Limite: 2014-02-19 methods for fire hoods for firefighters Data Limite: 2014-04-07 TC 164 prEN 15514:2013 TC 162 Chemicals used for treatment of swimming pool water prEN 14225-1:2014 Hydrochloric acid Diving suits Part 1: Wet suits - Requirements and test Data Limite: 2014-02-19 methods Data Limite: 2014-06-23 TC 165 prEN 1124-2:2014 TC 162 Pipes and fittings of longitudinally welded stainless prEN 14225-2:2014 steel pipes with spigot and socket for waste water Diving suits Part 2: Dry suits - Requirements and test systems Part 2: System S, forms and dimensions methods Data Limite: 2014-03-16 Data Limite: 2014-06-23 TC 165 TC 162 prEN 1610:2013 prEN 14225-3:2014 Construction and testing of drains and sewers Diving suits Part 3: Actively heated or cooled suit Data Limite: 2014-05-05 systems and components - Requirements and test methods TC 165 Data Limite: 2014-06-23 prEN 14654-1:2014 Management and control of operational activities in TC 162 drain and sewer systems outside buildings Part 1: prEN 16350:2013 Cleaning Protective gloves for electrostatical risks Data Limite: 2014-03-16 Data Limite: 2014-02-19 TC 170 TC 162 EN ISO 8624:2011 /prA 1:2014 prEN 16689:2013 Ophthalmic optics Spectacle frames Measuring system Protective clothing to be worn by firefighters during and terminology technical rescue operations (ISO 8624:2011/DAM 1:2014) Data Limite: 2014-04-07 Data Limite: 2014-06-16
TC 162 TC 170 prEN ISO 9151:2013 prEN ISO 10322-1:2014 Protective clothing against heat and flame Determination Ophthalmic optics Semi-finished spectacle lens blanks of heat transmission on exposure to flame Part 1: Specifications for single-vision and multifocal (ISO/DIS 9151:2013) lens blanks Data Limite: 2014-05-12 (ISO/DIS 10322-1:2014) Data Limite: 2014-06-16 TC 163 EN 31:2011 /prA 1:2013 TC 170
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 34 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos prEN ISO 10322-2:2014 prEN 378-1:2013 Ophthalmic optics Semi-finished spectacle lens blanks Refrigerating systems and heat pumps Safety and Part 2: Specifications for progressivepower and environmental requirements Part 1: Basic requirements, degressive-power lens blanks definitions, classification and selection criteria (ISO/DIS 10322-2:2014) Data Limite: 2014-05-19 Data Limite: 2014-06-16 TC 182 TC 170 prEN 378-2:2013 prEN ISO 10343:2014 Refrigerating systems and heat pumps Safety and Ophthalmic instruments Ophthalmometers environmental requirements Part 2: Design, (ISO/FDIS 10343:2014) construction, testing, marking and documentation Data Limite: 2014-03-23 Data Limite: 2014-05-19
TC 172 TC 182 prEN ISO 2759:2014 prEN 378-3:2013 Board Determination of bursting strength Refrigerating systems and heat pumps Safety and (ISO/FDIS 2759:2014) environmental requirements Part 3: Installation site and Data Limite: 2014-04-23 personal protectionn Data Limite: 2014-05-19 TC 172 prEN ISO 12625-7:2014 TC 182 Tissue paper and tissue products Part 7: Determination prEN 378-4:2013 of optical properties - Measurement of brightness and Refrigerating systems and heat pumps Safety and colour with D65/10° (outdoor daylight) environmental requirements Part 4: Operation, (ISO/FDIS 12625-7:2014) maintenance, repair and recovery Data Limite: 2014-03-16 Data Limite: 2014-05-19
TC 172 TC 185 prEN ISO 12625-9:2013 prEN ISO 10683:2014 Tissue paper and tissue products Part 9: Determination of Fasteners Non-electrolytically applied zinc flake coatings ball burst strength (ISO/DIS 12625-9:2013) (ISO/FDIS 10683:2014) Data Limite: 2014-03-17 Data Limite: 2014-03-16
TC 175 TC 187 prEN 16481:2014 prEN ISO 10081-4:2013 Timber stairs Structural design Calculation methods Classification of dense shaped refractory products Part Data Limite: 2014-03-16 4: Special products (ISO 10081-4:2007) TC 176 Data Limite: 2014-02-12 prEN 1434-1:2014 Heat meters Part 1: General requirements TC 188 Data Limite: 2014-07-06 prEN 12882:2013 Conveyor belts for general purpose use Electrical and TC 176 flammability safety requirements prEN 1434-2:2014 Data Limite: 2014-03-24 Heat meters Part 2: Constructional requirements Data Limite: 2014-07-06 TC 188 prEN 14973:2013 TC 176 Conveyor belts for use in underground installations prEN 1434-5:2014 Electrical and flammability safety requirements Heat meters Part 5: Initial verification tests Data Limite: 2014-03-24 Data Limite: 2014-07-06 TC 190 TC 176 prEN 1754:2014 prEN 1434-6:2014 Magnesium and magnesium alloys Designation system for Heat meters Part 6: Installation, commissioning, anodes, ingots and castings Material numbers and operational monitoring and maintenance material symbols Data Limite: 2014-07-06 Data Limite: 2014-06-09
TC 181 TC 191 prEN 14543:2013 prEN 12259-14:2014 Specification for dedicated liquefied petroleum gas Fixed firefighting systems Components for sprinkler and appliances Parasol patio heaters Flueless radiant heaters water spray systems Part 14: Sprinklers for residential for outdoor or amply ventilated area use applications Data Limite: 2014-02-26 Data Limite: 2014-06-16
TC 181 TC 195 prEN 16436:2013 prEN ISO 10121-1:2013 Rubber and plastic hoses and tubings for use with Test method for assessing the performance of gas-phase propane, butane and their mixtures in the vapour phase air cleaning media and devices for general ventilation Data Limite: 2014-02-05 Part 1: Gas-phase air cleaning media (ISO/FDIS 10121-1:2013) TC 182 Data Limite: 2014-02-05
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 35 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos Data Limite: 2014-04-23 TC 204 prEN 556-2:2014 TC 205 Sterilization of medical devices Requirements for prEN ISO 8871-5:2014 medical devices to be designated ''STERILE'' Part 2: Elastomeric parts for parenterals and for devices for Requirements for aseptically processed medical devices pharmaceutical use Part 5: Functional requirements and Data Limite: 2014-06-09 testing (ISO 8871-5:2005) TC 205 Data Limite: 2014-06-23 prEN ISO 1135-4:2013 Transfusion equipment for medical use Part 4: Transfusion TC 205 sets for single use, gravity feed prEN ISO 81060-2:2013 (ISO/DIS 1135-4:2013) Non-invasive sphygmomanometers Part 2: Clinical Data Limite: 2014-03-03 investigation of automated measurement type (ISO 81060-2:2013) TC 205 Data Limite: 2014-03-17 prEN ISO 1135-5:2013 Transfusion equipment for medical use Part 5: Transfusion TC 207 sets for single use with pressure infusion apparatus EN 747-1:2012 /prA 1:2013 (ISO/DIS 1135-5:2013) Furniture Bunk beds and high beds Part 1: Safety, Data Limite: 2014-03-03 strength and durability requirements Data Limite: 2014-02-19 TC 205 prEN ISO 3826-4:2013 TC 207 Plastics collapsible containers for human blood and EN 747-2:2012 /prA 1:2013 blood components Part 4: Aphaeresis blood bag systems Furniture Bunk beds and high beds Part 2: Test methods with integrated features Data Limite: 2014-02-19 (ISO/DIS 3826-4:2013) Data Limite: 2014-03-10 TC 207 prEN 15372:2014 TC 205 Furniture Strength, durability and safety Requirements prEN ISO 7199:2014 for non-domestic tables Cardiovascular implants and artificial organs Blood-gas Data Limite: 2014-06-30 exchangers (oxygenators) Amendment 1: Clarifications for test methodologies, labelling, and sampling schedule TC 211 (ISO 7199:2009 + Amd 1:2012) prEN ISO 1683:2013 Data Limite: 2014-06-16 Acoustics Preferred reference values for acoustical and vibratory levels TC 205 (ISO/DIS 1683:2013) prEN ISO 8536-8:2013 Data Limite: 2014-03-03 Infusion equipment for medical use Part 8: Infusion equipment for single use with pressure infusion TC 211 apparatus prEN ISO 11200:2014 (ISO/DIS 8536-8:2013) Acoustics Noise emitted by machinery and equipment Data Limite: 2014-02-26 Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work TC 205 station and at other specified positions prEN ISO 8536-9:2013 (ISO/FDIS 11200:2014) Infusion equipment for medical use Part 9: Fluid lines Data Limite: 2014-03-16 for single use with pressure infusion equipment (ISO/DIS 8536-9:2013) TC 214 Data Limite: 2014-02-26 EN ISO 9902-1:2001 /prA 2:2014 Textile machinery Noise test code Part 1: Common TC 205 requirements - prEN ISO 8536-10:2013 Amendment 2 Infusion equipment for medical use Part 10: Accessories (ISO 9902-1:2001/FDAM 2:2014) for fluid lines for single use with pressure infusion Data Limite: 2014-04-06 equipment (ISO/DIS 8536-10:2013) TC 214 Data Limite: 2014-02-26 EN ISO 9902-2:2001 /prA 2:2014 Textile machinery Noise test code Part 2: Spinning TC 205 preparatory and spinning machinery prEN ISO 8536-11:2013 Amendment 2 Infusion equipment for medical use Part 11: Infusion (ISO 9902-2:2001/FDAM 2:2014) filters for single use with pressure infusion equipment Data Limite: 2014-04-06 (ISO/DIS 8536-11:2013) Data Limite: 2014-02-26 TC 214 EN ISO 9902-3:2001 /prA 2:2014 TC 205 Textile machinery Noise test code Part 3: Nonwoven EN ISO 8871-2:2004 /prA 1:2014 machinery Elastomeric parts for parenterals and for devices for Amendment 2 pharmaceutical use Part 2: Identification and (ISO 9902-3:2001/FDAM 2:2014) characterization - Amendment 1 Data Limite: 2014-04-06 (ISO 8871-2:2003/Amd 1:2005)
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 36 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos TC 214 prEN ISO 8330:2014 EN ISO 9902-4:2001 /prA 2:2014 Rubber and plastics hoses and hose assemblies Textile machinery Noise test code Part 4: Yarn Vocabulary processing, cordage and rope manufacturing machinery (ISO/FDIS 8330:2014) Amendment 2 Data Limite: 2014-05-06 (ISO 9902-4:2001/FDAM 2:2014) Data Limite: 2014-04-06 TC 218 EN ISO 28017:2011 /prA 1:2014 TC 214 Rubber hoses and hose assemblies, wire or textile EN ISO 9902-5:2001 /prA 2:2014 reinforced, for dredging applications Specification Textile machinery Noise test code Part 5: Weaving and (ISO 28017:2011/DAM 1:2014) knitting preparatory machinery Data Limite: 2014-07-06 (ISO 9902-5:2001/FDAM 2:2014) Data Limite: 2014-04-06 TC 219 prEN ISO 15589-2:2013 TC 214 Petroleum, petrochemical and natural gas industries EN ISO 9902-6:2001 /prA 2:2014 Cathodic protection of pipeline transportation systems Textile machinery Noise test code Part 6: Fabric Part 2: Offshore pipelines manufacturing machinery (ISO 15589-2:2012) (ISO 9902-6:2001/FDAM 2:2014) Data Limite: 2014-02-05 Data Limite: 2014-04-06 TC 225 TC 214 prCEN/TR 16684:2013 EN ISO 9902-7:2001 /prA 2:2014 Information technology Notification of RFID Additional Textile machinery Noise test code Part 7: Dyeing and information to be provided by operators finishing machinery Data Limite: 2014-02-07 (ISO 9902-7:2001/FDAM 2:2014) Data Limite: 2014-04-06 TC 225 prCEN/TS 16685:2013 TC 215 Information technology Notification of RFID The prEN ISO 10079-1:2013 information sign to be displayed in areas where RFID Medical suction equipment Part 1: Electrically powered interrogators are deployed suction equipment Data Limite: 2014-02-07 (ISO/DIS 10079-1:2013) Data Limite: 2014-05-19 TC 225 prEN 16656:2013 TC 215 Information technology Radio frequency prEN ISO 23747:2014 identification for item management RFID Emblem Anaesthetic and respiratory equipment Peak expiratory (ISO/IEC 29160:2012, modified) flow meters for the assessment of pulmonary function in Data Limite: 2014-04-07 spontaneously breathing humans (ISO/DIS 23747:2014) TC 226 Data Limite: 2014-06-23 prEN 1317-5:2013 Road restraint systems Part 5: Product requirements, TC 218 test and assessment methods and acceptance criteria prEN ISO 3949:2014 Data Limite: 2014-05-05 Plastics hoses and hose assemblies Textile-reinforced types for hydraulic applications Specification TC 226 (ISO 3949:2009) prEN 12767:2013 Data Limite: 2014-06-23 Passive safety of support structures for road equipment Requirements and test methods TC 218 Data Limite: 2014-02-05 prEN ISO 3994:2014 Plastics hoses Helical-thermoplastic-reinforced TC 226 thermoplastics hoses for suction and discharge of EN 13197:2011 /prA 1:2013 aqueous materials Specification Road marking materials Wear simulator Turntable (ISO/FDIS 3994:2014) Data Limite: 2014-02-12 Data Limite: 2014-03-16 TC 227 TC 218 prEN 12697-7:2013 prEN ISO 6806:2014 Bituminous mixtures Test methods for hot mix asphalt Rubber hoses and hose assemblies for use in oil burners Part 7: Determination of bulk density of bituminous Specification specimens by gamma rays (ISO/FDIS 6806:2014) Data Limite: 2014-03-03 Data Limite: 2014-05-06 TC 227 TC 218 prEN 12697-16:2013 prEN ISO 8029:2014 Bituminous mixtures Test methods for hot mix asphalt Plastics hose General-purpose collapsible water hose, Part 16: Abrasion by studded tyres textile-reinforced Specification Data Limite: 2014-05-05 (ISO/FDIS 8029:2014) Data Limite: 2014-03-16 TC 227 prEN 12697-22:2013 TC 218 Bituminous mixtures Test methods for hot mix asphalt
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 37 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos Part 22: Wheel tracking sampling of phytoplankton from inland waters Data Limite: 2014-03-10 Data Limite: 2014-05-12
TC 227 TC 230 prEN 12697-25:2013 prEN ISO 9308-2:2013 Bituminous mixtures Test methods for hot mix asphalt Water quality Enumeration of Escherichia coli and Part 25: Cyclic compression test coliform bacteria Part 2: Most probable number method Data Limite: 2014-03-03 (ISO 9308-2:2012) Data Limite: 2014-03-10 TC 227 prEN 12697-32:2013 TC 230 Bituminous mixtures Test methods for hot mix asphalt prEN ISO 12010:2013 Part 32: Laboratory compaction of bituminous mixtures Water quality Determination of short-chain by vibratory compactor polychlorinated alkanes (SCCPs) in water Method using Data Limite: 2014-03-03 gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI) TC 227 (ISO 12010:2012) prEN 12697-33:2013 Data Limite: 2014-03-10 Bituminous mixtures Test methods for hot mix asphalt Part 33: Specimen prepared by roller compactor TC 231 Data Limite: 2014-03-03 EN ISO 28927-5:2009 /prA 1:2013 Hand-held portable power tools Test methods for TC 227 evaluation of vibration emission Part 5: Drills and impact prEN 12697-48:2013 drills Bituminous mixtures Test methods for hot mix asphalt (ISO 28927-5:2009/DAM 1:2013) Part 48: Interlayer Bonding Data Limite: 2014-05-12 Data Limite: 2014-02-28 TC 234 TC 230 prEN 1776:2013 prCEN/TS 16692:2013 Gas infrastructure Gas measuring systems Functional Water quality Determination of tributyl tin (TBT) in requirements whole water samples using solid phase extraction (SPE) Data Limite: 2014-04-28 and gas chromatography with triple quadrupole mass spectrometry TC 237 Data Limite: 2014-02-04 prEN 12405-3:2013 Gas meters Conversion devices Part 3: Flow computer TC 230 Data Limite: 2014-04-28 prEN 14757:2013 Water quality Sampling of fish with multi-mesh gillnets TC 247 Data Limite: 2014-03-03 prEN ISO 16484-5:2013 Building automation and control systems (BACS) Part TC 230 5: Data communication protocol prEN 16691:2013 (ISO/FDIS 16484-5:2013) Water quality Determination of polycyclic aromatic Data Limite: 2014-03-05 hydrocarbons (PAH) in whole water samples using liquid solid extraction combined with gas TC 247 chromatography mass spectrometry (GC-MS) prEN ISO 16484-6:2013 Data Limite: 2014-04-21 Building automation and control systems (BACS) Part 6: Data communication conformance testing TC 230 (ISO/FDIS 16484-6:2013) prEN 16693:2013 Data Limite: 2014-03-05 Water quality Determination of organochlorine pesticides (OCP) in whole water samples using solid TC 248 phase extraction (SPE) with SPE-disks combined with prEN ISO 10306:2013 gas chromatography mass spectrometry (GC-MS) Textiles Cotton fibres Evaluation of maturity by the air Data Limite: 2014-04-21 flow method (ISO/FDIS 10306:2013) TC 230 Data Limite: 2014-03-19 prEN 16694:2013 Water quality Determination of pentabromodiphenyl TC 248 ether (PBDE) in whole water samples using solid phase prEN ISO 12947-2:2014 extraction (SPE) with SPE-disks combined with gas Textiles Determination of the abrasion resistance of chromatography - mass spectrometry (GC-MS) fabrics by the Martindale method Part 2: Determination Data Limite: 2014-04-21 of specimen breakdown (ISO/DIS 12947-2:2014) TC 230 Data Limite: 2014-06-09 prEN 16695:2013 Water quality Guidance on the estimation of microalgal TC 248 biovolume prEN ISO 14389:2013 Data Limite: 2014-05-05 Textiles Determination of the phthalate content Tetrahydrofuran method TC 230 (ISO/FDIS 14389:2013) prEN 16698:2013 Data Limite: 2014-05-19 Water quality Guidance on quantitative and qualitative
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 38 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos TC 248 Data Limite: 2014-05-06 prEN ISO 16373-3:2014 Textiles Dyestuffs Part 3: Method for determination of TC 249 certain carcinogenic dyestuffs (method using prEN ISO 13802:2013 triethylamine/methanol) Plastics Verification of pendulum impact-testing (ISO/FDIS 16373-3:2014) machines Charpy, Izod and tensile impacttesting Data Limite: 2014-03-16 (ISO/DIS 13802:2013) Data Limite: 2014-05-19 TC 249 prEN 15534-6:2014 TC 249 Composites made from cellulose-based materials and prEN ISO 20200:2013 thermoplastics (usually called wood-polymer composites Plastics Determination of the degree of disintegration of (WPC) or natural fibre composites (NFC)) - Part 6: plastic materials under simulated composting conditions Specifications for fencing profiles and systems in a laboratory-scale test Data Limite: 2014-07-06 (ISO/DIS 20200:2013) Data Limite: 2014-05-19 TC 249 EN ISO 2440:1999 /prA 2:2013 TC 249 Flexible and rigid cellular polymeric materials prEN ISO 20753:2013 Accelerated ageing tests Amendment 2 Plastics Test specimens (ISO 2440:1997/DAM 2:2013) (ISO 20753:2008) Data Limite: 2014-03-03 Data Limite: 2014-03-31
TC 249 TC 250 prEN ISO 4892-1:2014 EN 1991-1-3:2003 /prA 1:2013 Plastics Methods of exposure to laboratory light sources Eurocode 1 Actions on structures Part 1-3: General Part 1: General guidance actions - Snow loads (ISO/DIS 4892-1:2014) Data Limite: 2014-03-03 Data Limite: 2014-06-23 TC 250 TC 249 EN 1992-1-1:2004 /prA 1:2013 prEN ISO 6427:2013 Eurocode 2: Design of concrete structures Part 1-1: Plastics Determination of matter extractable by organic General rules and rules for buildings solvents (conventional methods) Data Limite: 2014-02-12 (ISO 6427:2013) Data Limite: 2014-04-28 TC 250 prEN 1992-4:2013 TC 249 Eurocode 2: Design of concrete structures Part 4: Design EN ISO 10350-1:2008 /prA 1:2014 of fastenings for use in concrete Plastics Acquisition and presentation of comparable Data Limite: 2014-02-26 single-point data Part 1: Moulding materials (ISO 10350-1:2008/FDAM 1:2014) TC 250 Data Limite: 2014-03-30 EN 1993-1-1:2005 /prA 1:2013 Eurocode 3: Design of steel structures Part 1-1: General TC 249 rules and rules for buildings prEN ISO 11357-2:2013 Data Limite: 2014-02-05 Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass TC 256 transition step height prEN 13129:2013 (ISO 11357-2:2013) Railway applications Air conditioning for main line Data Limite: 2014-02-05 rolling stock Comfort parameters and type tests Data Limite: 2014-03-17 TC 249 prEN ISO 11357-5:2013 TC 256 Plastics Differential scanning calorimetry (DSC) Part 5: prEN 13232-1:2013 Determination of characteristic reaction-curve Railway applications Track - Switches and crossings for temperatures and times, enthalpy of reaction and degree Vignole rails Part 1: Definitions of conversion Data Limite: 2014-03-10 (ISO 11357-5:2013) Data Limite: 2014-02-05 TC 256 prEN 15528:2013 TC 249 Railway applications Line categories for managing the prEN ISO 11357-7:2014 interface between load limits of vehicles and Plastics Differential scanning calorimetry (DSC) Part 7: infrastructure Determination of crystallization kinetics Data Limite: 2014-04-07 (ISO/DIS 11357-7:2014) Data Limite: 2014-06-30 TC 256 prEN 16272-3-2:2014 TC 249 Railway applications Track - Noise barriers and related prEN ISO 11403-3:2014 devices acting on airborne sound propagation - Test Plastics Acquisition and presentation of comparable method for determining the acoustic performance Part multipoint data Part 3: Environmental influences on 3-2: Normalized railway noise spectrum and single number properties ratings for direct field applications (ISO/FDIS 11403-3:2014) Data Limite: 2014-03-30
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 39 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos requirements TC 256 (ISO/DIS 21029-2:2014) prEN 16272-6:2014 Data Limite: 2014-04-23 Railway applications Track - Noise barriers and related devices acting on airborne sound propagation - Test TC 269 method for determining the acoustic performance Part 6: prEN 12953-3:2013 Intrinsic characteristics - In situ values of airborne Shell boilers Part 3: Design and calculation for pressure sound insulation under direct sound field conditions parts Data Limite: 2014-03-30 Data Limite: 2014-02-26
TC 256 TC 274 prEN 16431:2014 prEN 12312-12:2014 Railway applications Track Hollow sleepers and bearers Aircraft ground support equipment Specific requirements Data Limite: 2014-03-30 Part 12: Potable water service equipment Data Limite: 2014-06-30 TC 256 prEN 16683:2013 TC 274 Railway applications Call for aid and communication prEN 12312-13:2014 device Requirements Aircraft ground support equipment Specific requirements Data Limite: 2014-03-10 Part 13: Lavatory service equipment Data Limite: 2014-06-30 TC 261 prEN 16679:2013 TC 274 Packaging Tamper verification features for medicinal prEN 12312-14:2013 product packaging Aircraft ground support equipment Specific requirements Data Limite: 2014-02-19 Part 14: Disabled/incapacitated passenger boarding vehicles TC 261 Data Limite: 2014-02-05 prEN ISO 17351:2014 Packaging Braille on packaging for medicinal products TC 275 (ISO 17351:2013) prCEN/TR 16699:2014 Data Limite: 2014-06-09 Foodstuffs Determination of pesticide residues by GC-MS/MS Tandem mass spectrometric parameters TC 262 Data Limite: 2014-04-09 prEN ISO 6509-1:2014 Corrosion of metals and alloys Determination of TC 275 dezincification resistance of copper alloys with zinc Part prEN 12822:2014 1: Test method Foodstuffs Determination of vitamin B6 by high (ISO/FDIS 6509-1:2014) performance chromatography Data Limite: 2014-04-06 Data Limite: 2014-03-16
TC 262 TC 275 prEN ISO 17081:2013 prEN 12823-1:2014 Method of measurement of hydrogen permeation and Foodstuffs Determination of vitamin A by high determination of hydrogen uptake and transport in metals performance liquid chromatography Part 1: Measurement by an electrochemical technique of all-E-retinol and 13-Z-retinol (ISO/FDIS 17081:2013) Data Limite: 2014-03-23 Data Limite: 2014-03-05 TC 275 TC 264 prEN 14122:2014 prEN 12341:2014 Foodstuffs Determination of vitamin B1 by high Ambient air Standard gravimetric measurement method performance liquid chromatography for the determination of the PM10 or PM2,5 mass Data Limite: 2014-03-16 concentration of suspended particulate matter Data Limite: 2014-03-09 TC 275 prEN 14152:2014 TC 268 Foodstuffs Determination of vitamin B2 by high prEN ISO 20421-2:2013 performance liquid chromatography Cryogenic vessels Large transportable vacuum-insulated Data Limite: 2014-03-16 vessels Part 2: Operational requirements (ISO/DIS 20421-2:2013) TC 275 Data Limite: 2014-02-19 prEN ISO 6887-1:2013 Microbiology of food and animal feed Preparation of test TC 268 samples, initial suspension and decimal dilutions for prEN ISO 21009-2:2013 microbiological examination Part 1: General rules for the Cryogenic vessels Static vacuum insulated vessels Part preparation of the initial suspension and decimal 2: Operational requirements dilutions (ISO/DIS 21009-2:2013) (ISO/DIS 6887-1:2013) Data Limite: 2014-02-19 Data Limite: 2014-04-28
TC 268 TC 275 prEN ISO 21029-2:2014 prEN ISO 6887-2:2013 Cryogenic vessels Transportable vacuum insulated vessels Microbiology of the food chain Preparation of test of not more than 1 000 litres volume Part 2: Operational samples, initial suspension and decimal dilutions for
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 40 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos microbiological examination Part 2: Specific rules for the preparation of meat and meat products TC 278 (ISO/DIS 6887-2:2013) prEN 15531-2:2013 Data Limite: 2014-04-28 Public transport Service interface for real-time information relating to public transport operations Part TC 275 2: Communications prEN ISO 6887-3:2013 Data Limite: 2014-03-10 Microbiology of food chain Preparation of test samples, initial suspension and decimal dilutions for TC 278 microbiological examination Part 3: Specific rules for the prEN 15531-3:2013 preparation of fish and fishery products Public transport Service interface for real-time (ISO/DIS 6887-3:2013) information relating to public transport operations Part Data Limite: 2014-04-28 3: Functional service interfaces Data Limite: 2014-03-10 TC 275 prEN ISO 6887-4:2013 TC 278 Microbiology of the food chain Preparation of test prEN ISO 12813:2013 samples, initial suspension and decimal dilutions for Electronic fee collection Compliance check microbiological examination Part 4: Specific rules for communication for autonomous systems the preparation of miscellaneous products (ISO/DIS 12813:2013) (ISO/DIS 6887-4:2013) Data Limite: 2014-05-12 Data Limite: 2014-04-28 TC 278 TC 275 prEN ISO 13141:2013 prEN ISO 11133:2013 Electronic fee collection Localisation augmentation Microbiology of food, animal feed and water Preparation, communication for autonomous systems production, storage and performance testing of culture (ISO/DIS 13141:2013) media Data Limite: 2014-05-12 ISO/FDIS 11133:2013) Data Limite: 2014-02-19 TC 278 EN ISO 14906:2011 /prA 1:2013 TC 275 Electronic fee collection Application interface prEN ISO 17604:2014 definition for dedicated short-range communication Microbiology of food and animal feed Carcass sampling (ISO 14906:2011/DAM 1:2013) for microbiological analysis Data Limite: 2014-03-10 (ISO/DIS 17604:2014) Data Limite: 2014-06-16 TC 278 prEN ISO 17575-1:2013 TC 275 Electronic fee collection Application interface prEN ISO 18744:2013 definition for autonomous systems Part 1: Charging Microbiology of the food chain Detection and enumeration (ISO/DIS 17575-1:2013) of Cryptosporidium and Giardia in fresh leafy green Data Limite: 2014-02-26 vegetables and berry fruits (ISO/DIS 18744:2013) TC 278 Data Limite: 2014-04-07 prEN ISO 17575-2:2013 Electronic fee collection Application interface TC 278 definition for autonomous systems Part 2: Communication prCEN ISO/TS 17419:2013 and connection to the lower layers Intelligent transport systems Co-operative systems (ISO/DIS 17575-2:2013) Classification and management of ITS applications in a Data Limite: 2014-05-12 global context (ISO/DTS 17419:2013) TC 278 Data Limite: 2014-02-07 prEN ISO 17575-3:2013 Electronic fee collection Application interface TC 278 definition for autonomous systems Part 3: Context data prCEN ISO/TS 17423:2013 (ISO/DIS 17575-3:2013) Intelligent transport systems Co-operative systems ITS Data Limite: 2014-05-12 application requirements and objectives for selection of communication profiles TC 278 (ISO/DTS 17423:2013) prEN ISO 17575-4:2013 Data Limite: 2014-02-07 Electronic fee collection Application interface definition for autonomous systems Part 4: Roaming TC 278 (ISO/DIS 17575-4:2013) prCEN/TR 16690:2014 Data Limite: 2014-05-12 Electronic fee collection Guidelines for EFC applications based on in-vehicle ITS stations TC 286 Data Limite: 2014-04-09 EN 12493:2013 /prA 1:2014 LPG equipment and accessories Welded steel pressure TC 278 vessels for LPG road tankers Design and manufacture prEN 15531-1:2013 Data Limite: 2014-04-16 Public transport Service interface for real-time information relating to public transport operations Part TC 287 1: Context and framework prEN ISO 19109:2013 Data Limite: 2014-03-10 Geographic information Rules for application schema
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 41 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos (ISO/DIS 19109:2013) with periodic leachant renewal, under fixed conditions Data Limite: 2014-03-10 Data Limite: 2014-02-05
TC 287 TC 292 prEN ISO 19110:2013 prEN 16660:2013 Geographic information Methodology for feature Characterisation of waste Leaching behaviour test cataloguing Determination of the reducing character and the reducing (ISO/DIS 19110:2013) capacity Data Limite: 2014-02-05 Data Limite: 2014-02-05
TC 287 TC 294 prEN ISO 19117:2013 prEN 13757-5:2013 Geographic information Portrayal Communication systems for meters and remote reading of (ISO 19117:2012) meters Part 5: Wireless relaying Data Limite: 2014-02-12 Data Limite: 2014-04-21
TC 289 TC 296 prEN ISO 3379:2013 EN 14116:2012 /prA 1:2014 Leather Determination of distension and strength of Tanks for transport of dangerous goods Digital interface surface (Ball burst method) for product recognition devices for liquid fuels (ISO/DIS 3379:2013) Data Limite: 2014-07-06 Data Limite: 2014-02-26 TC 296 TC 289 prEN 15208:2013 prEN ISO 19074:2013 Tanks for transport of dangerous goods Sealed parcel Leather Physical and mechanical tests Determination of delivery systems Working principles and interface water absorption by capillary action (wicking) specifications (ISO/DIS 19074:2013) Data Limite: 2014-02-19 Data Limite: 2014-02-26 TC 296 TC 289 prEN 15969-1:2014 prEN ISO 19076:2014 Tanks for transport of dangerous goods Digital interface Leather Measurement of leather surface Using electronic for the data transfer between tank vehicle and with techniques stationary facilities Part 1: Protocol specification - (ISO/DIS 19076:2014) Control, measurement and event data Data Limite: 2014-06-16 Data Limite: 2014-06-23
TC 290 TC 296 prEN ISO 1660:2013 prEN 16522:2013 Geometrical product specifications (GPS) Geometrical Tanks for transport of dangerous goods Service equipment tolerancing Profile tolerancing for tanks Flame arresters for breather devices (ISO/DIS 1660:2013) Data Limite: 2014-02-19 Data Limite: 2014-02-26 TC 301 TC 290 prEN ISO 18541-4:2013 prEN ISO 14405-1:2013 Road vehicles Standardized access to automotive repair Geometrical product specifications (GPS) Dimensional and maintenance information (RMI) Part 4: Conformance tolerancing Part 1: Linear sizes test (ISO/DIS 14405-1:2013) (ISO/DIS 18541-4:2013) Data Limite: 2014-02-07 Data Limite: 2014-04-28
TC 292 TC 301 prEN 14429:2013 prEN ISO 18542-2:2014 Characterisation of waste Leaching behaviour test Road vehicles- Standardized repair and maintenance Influence of pH on leaching with initial acid/base information (RMI) terminology Part 2:Standardized addition process implementation requirements, registration Data Limite: 2014-02-05 authority (ISO/FDIS 18542-2:20142) TC 292 Data Limite: 2014-03-16 prEN 14997:2013 Characterisation of waste Leaching behaviour test TC 302 Influence of pH on leaching with continuous pH control prEN ISO 8968-4:2013 Data Limite: 2014-02-05 Milk and milk products Determination of nitrogen content Part 4: Determination of protein and non protein TC 292 nitrogen content and true protein content calculation prEN 15002:2013 (Reference method) Characterization of waste Preparation of test portions (ISO/DIS 8968-4:2013) from the laboratory sample Data Limite: 2014-02-26 Data Limite: 2014-04-28 TC 302 TC 292 prEN ISO 16297:2013 prEN 15863:2013 Milk Bacterial count Protocol for the evaluation of Characterisation of waste Leaching behaviour test for alternative methods basic characterisation Dynamic monolithic leaching test (ISO 16297:2013)
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 42 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos Data Limite: 2014-03-31 TC 331 TC 305 prCEN/TS 15448:2013 prEN 1127-2:2014 Postal services Open standard interface between image Explosive atmospheres Explosion prevention and controller and enrichment devices (OCRs, video coding protection Part 2: Basic concepts and methodology for systems, voting systems) mining Data Limite: 2014-02-14 Data Limite: 2014-04-06 TC 332 TC 307 prEN ISO 384:2013 prEN ISO 6883:2013 Laboratory glass and plastics ware Principles of design Animal and vegetable fats and oils Determination of and construction of volumetric instruments conventional mass per volume (litre weight in air) (ISO/DIS 384:2013) (ISO 6883:2007) Data Limite: 2014-03-31 Data Limite: 2014-03-10 TC 332 TC 307 prEN ISO 3819:2013 prEN ISO 12872:2013 Laboratory glassware Beakers Olive oils and olive-pomace oils Determination of the (ISO/DIS 3819:2013) 2-glyceryl monopalmitate content Data Limite: 2014-03-31 (ISO 12872:2010) Data Limite: 2014-03-10 TC 332 prEN ISO 4796-1:2013 TC 307 Laboratory glassware Bottles Part 1: Screw-neck bottles prEN ISO 12873:2013 (ISO/DIS 4796-1:2013) Olive oils and olive-pomace oils Determination of wax Data Limite: 2014-03-31 content by capillary gas chromatography (ISO 12873:2010) TC 332 Data Limite: 2014-03-10 prEN ISO 4797:2014 Laboratory glassware Boiling flasks with conical ground TC 307 joints prEN ISO 12966-1:2013 (ISO/DIS 4797:2014) Animal and vegetable fats and oils Gas chromatography of Data Limite: 2014-07-06 fatty acid methyl esters Part 1: Guidelines on modern gas chromatography of fatty acid methy esters TC 332 (ISO/DIS 12966-1:2013) prEN ISO 16496:2013 Data Limite: 2014-02-26 Laboratory glassware Vacuum-jacketed vessels for heat insulation TC 307 (ISO/DIS 16496:2013) prEN ISO 12966-4:2014 Data Limite: 2014-03-31 Animal and vegetable fats and oils Determination of methyl esters of fatty acids Part 4: Capillary gas TC 335 chromatographic method prEN ISO 17225-1:2013 (ISO/DIS 12966-4:2014) Solid biofuels Fuel specifications and classes Part 1: Data Limite: 2014-06-16 General requirements (ISO/FDIS 17225-1:2013) TC 307 Data Limite: 2014-02-28 prEN ISO 29822:2013 Vegetable fats and oils Isomeric diacylglycerols TC 335 Determination of relative amounts of 1,2- and prEN ISO 17225-2:2013 1,3-diacylglycerols Solid biofuels Fuel specifications and classes Part 2: (ISO 29822:2009) Graded wood pellets Data Limite: 2014-03-10 (ISO/FDIS 17225-2:2013) Data Limite: 2014-02-28 TC 307 prEN ISO 29841:2013 TC 335 Vegetable fats and oils Determination of the degradation prEN ISO 17225-3:2013 products of chlorophylls a and a' (pheophytins a, a' and Solid biofuels Fuel specifications and classes Part 3: pyropheophytins) Graded wood briquettes (ISO 29841:2009) (ISO/FDIS 17225-3:2013) Data Limite: 2014-03-10 Data Limite: 2014-02-28
TC 312 TC 335 prEN ISO 22975-3:2014 prEN ISO 17225-4:2013 Solar energy Collector components and materials Part 3: Solid biofuels Fuel specifications and classes Part 4: Absorber surface durability Graded wood chips (ISO/FDIS 22975-3:2014) (ISO/FDIS 17225-4:2013) Data Limite: 2014-04-06 Data Limite: 2014-02-28
TC 331 TC 335 prCEN/TR 16706:2014 prEN ISO 17225-5:2013 Postal Services Quality of Service - Measurement of Solid biofuels Fuel specifications and classes Part 5: incorrect delivery Feasibility Report Graded firewood Data Limite: 2014-05-06 (ISO/FDIS 17225-5:2013)
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 43 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos Data Limite: 2014-02-28 Data Limite: 2014-02-12
TC 335 TC 336 prEN ISO 17225-6:2013 prEN 1427:2013 Solid biofuels Fuel specifications and classes Part 6: Bitumen and bituminous binders Determination of the Graded non-woody pellets softening point Ring and Ball method (ISO/FDIS 17225-6:2013) Data Limite: 2014-02-12 Data Limite: 2014-02-28 TC 336 TC 335 prEN 12593:2013 prEN ISO 17225-7:2013 Bitumen and bituminous binders Determination of the Solid biofuels Fuel specifications and classes Part 7: Fraass breaking point Graded non-woody briquettes Data Limite: 2014-02-12 (ISO/FDIS 17225-7:2013) Data Limite: 2014-02-28 TC 336 prEN 12606-1:2013 TC 335 Bitumen and bituminous binders Determination of the prEN ISO 17828:2013 paraffin wax content Part 1: Method by distillation Solid biofuels Determination of bulk density Data Limite: 2014-02-12 (ISO/DIS 17828:2013) Data Limite: 2014-02-12 TC 338 prEN ISO 27971:2014 TC 335 Cereals and cereal products Common wheat (Triticum prEN ISO 17831-1:2013 aestivum L.) Determination of alveograph properties of Solid biofuels Determination of mechanical durability of dough at constant hydration from commercial or test pellets and briquettes Part 1: Pellets flours and test milling methodology (ISO/DIS 17831-1:2013) (ISO/DIS 27971:2014) Data Limite: 2014-02-26 Data Limite: 2014-06-09
TC 335 TC 344 prEN ISO 17831-2:2013 prEN 16681:2013 Solid biofuels Determination of mechanical durability of Steel static storage systems Adjustable pallet racking pellets and briquettes Part 2: Briquettes systems Principles for seismic design (ISO/DIS 17831-2:2013) Data Limite: 2014-03-03 Data Limite: 2014-02-26 TC 345 TC 335 prEN ISO 10693:2013 prEN ISO 18122:2013 Soil quality Determination of carbonate content Solid biofuels Determination of ash content Volumetric method (ISO/DIS 18122:2013) (ISO 10693:1995) Data Limite: 2014-02-26 Data Limite: 2014-02-12
TC 335 TC 345 prEN ISO 18123:2013 prEN ISO 11074:2013 Solid biofuels Determination of the content of volatile Soil quality Vocabulary matter (ISO/DIS 11074:2013) (ISO/DIS 18123:2013) Data Limite: 2014-02-05 Data Limite: 2014-02-26 TC 345 TC 335 prEN ISO 11272:2013 prEN ISO 18134-1:2013 Soil quality Determination of dry bulk density Solid biofuels Determination of moisture content - Oven (ISO 11272:1998) dry method Part 1: Total moisture - Reference method Data Limite: 2014-02-12 (ISO/DIS 18134-1:2013) Data Limite: 2014-02-26 TC 345 prEN ISO 11274:2013 TC 335 Soil quality Determination of the water-retention prEN ISO 18134-2:2013 characteristic Laboratory methods Solid biofuels Determination of moisture content - Oven (ISO 11274:1998 + C1:2009) dry method Part 2: Total moisture - Simplified method Data Limite: 2014-02-12 (ISO/DIS 18134-2:2013) Data Limite: 2014-02-26 TC 345 prEN ISO 11275:2013 TC 335 Soil quality Determination of unsaturated hydraulic prEN ISO 18134-3:2013 conductivity and water-retention characteristic - Wind's Solid biofuels Determination of moisture content - Oven evaporation method dry method Part 3: Moisture in general analysis simple (ISO 11275:2004) (ISO/DIS 18134-3:2013) Data Limite: 2014-02-12 Data Limite: 2014-02-26 TC 345 TC 336 prEN ISO 11276:2013 prEN 1426:2013 Soil quality Determination of pore water pressure Bitumen and bituminous binders Determination of needle Tensiometer method penetration (ISO 11276:1995)
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 44 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos Data Limite: 2014-02-12 TC 392 prEN 16521:2014 TC 345 Cosmetics Analytical methods GC/MS method for the prEN ISO 11508:2013 identification and assay of 12 phthalates in cosmetic Soil quality Determination of particle density samples ready for analytical injection (ISO 11508:1998) Data Limite: 2014-03-09 Data Limite: 2014-02-12 TC 409 TC 345 prEN 16708:2014 prEN ISO 17184:2014 Beauty Salon Services Requirements and recommendations Soil quality Determination of carbon and nitrogen by for the provision of service near-infrared spectrometry (NIRS) Data Limite: 2014-07-06 (ISO/FDIS 17184:2014) Data Limite: 2014-03-23 TC 414 prEN 16686:2013 TC 345 Osteopathic healthcare provision prEN ISO 18772:2013 Data Limite: 2014-04-07 Soil quality Guidance on leaching procedures for subsequent chemical and ecotoxicological testing of soils TC SSC01 and soil materials prEN ISO 3218:2014 (ISO 18772:2008) Essential oils Principles of nomenclature Data Limite: 2014-02-12 (ISO/FDIS 3218:2014) Data Limite: 2014-03-16 TC 346 prEN 16682:2013 TC CSC01 Conservation of Cultural Heritage Guide to the prEN ISO 3493:2014 measurements of moisture content in materials Vanilla - Vocabulary constituting movable and immovable cultural heritage (ISO/FDIS 3493:2014) Data Limite: 2014-03-03 Data Limite: 2014-04-09
TC 351 TC SSC01 prEN 16687:2013 EN ISO 8589:2010 /prA 1:2013 Construction products Assessment of release of Sensory analysis General guidance for the design of test dangerous substances Terminology rooms Data Limite: 2014-03-31 (ISO 8589:2010/FDAM 1:2013) Data Limite: 2014-02-19 TC 371 prCEN/TR 15615:2014 TC SST01 Energy Performance of buildings Module M1-x EN ISO 10240:2004 /prA 1:2013 Accompanying Technical Report on draft Overarching Small craft Owner's manual standard EPB (prEN 15603) (ISO 10240:2004/DAM 1:2013) Data Limite: 2014-04-09 Data Limite: 2014-03-24
TC 371 TC SST01 prCEN/TS 16628:2014 prEN ISO 18854:2013 Energy Performance of Buildings Basic Principles for Small craft Reciprocating internal combustion engines the set of EPBD standards exhaust emission measurement Testbed measurement of Data Limite: 2014-04-09 gaseous and particulate exhaust emissions (ISO/DIS 18854:2013) TC 371 Data Limite: 2014-02-26 prCEN/TS 16629:2014 Energy Performance of Buildings Detailed Technical TC SST01 Rules for the set of EPB-standards prEN ISO 19009:2013 Data Limite: 2014-04-09 Small craft Electric navigation lights Performance (ISO/DIS 19009:2013) TC 388 Data Limite: 2014-04-07 prCEN/TS 16705:2013 Perimeter protection Performance classification TC SST01 methodology EN ISO 21487:2012 /prA 1:2013 Data Limite: 2014-02-28 Small craft Permanently installed petrol and diesel fuel tanks TC 391 (ISO 21487:2012/DAM 1:2013) prEN ISO 22300:2014 Data Limite: 2014-02-26 Societal security Terminology (ISO 22300:2012) TC SST01 Data Limite: 2014-06-16 EN ISO 25197:2012 /prA 1:2013 Small craft Electrical/electronic control systems for TC 391 steering, shift and throttle (ISO prEN ISO 22301:2014 25197:2012/DAM 1:2013) Societal security Business continuity management Data Limite: 2014-02-26 systems Requirements (ISO 22301:2012) TC CSC20 Data Limite: 2014-06-16 prEN 16701:2014 Energetic materials for Defence Safety, vulnerability
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 45 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos Friability Data Limite: 2014-03-03 Data Limite: 2014-03-09 TC ECISS/107 TC CSS26 prEN 10272:2013 prCEN ISO/TS 14067:2014 Stainless steel bars for pressure purposes Greenhouse gases Carbon footprint of products Data Limite: 2014-03-03 Requirements and guidelines for quantification and communication TC ECISS/107 (ISO/TS 14067:2013) prEN 10273:2013 Data Limite: 2014-05-06 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties TC JW001 Data Limite: 2014-03-03 prEN 16247-5:2014 Energy audits Part 5: Competence of energy auditors TC ECISS/107 Data Limite: 2014-06-09 prEN 10314:2013 Method for the derivation of minimum values of proof TC JT003 strength of steel at elevated temperatures prCEN/TR 14060:2014 Data Limite: 2014-03-03 Medical device traceability enabled by unique device identification (UDI) TC ECISS/108 Data Limite: 2014-04-23 prEN 10106:2013 Cold rolled non-oriented electrical steel sheet and strip TC ECISS/100 delivered in the fully processed state prEN 10027-2:2013 Data Limite: 2014-03-03 Designation systems for steels Part 2: Numerical system Data Limite: 2014-02-05 TC ECISS/108 prEN 10303:2013 TC ECISS/101 Thin magnetic steel sheet and strip for use at medium prEN ISO 10113:2013 frequencies Metallic materials Sheet and strip Determination of plastic Data Limite: 2014-03-03 strain ratio (ISO 10113:2006) TC ECISS/109 Data Limite: 2014-05-05 prEN 10139:2013 Cold rolled uncoated mild steel narrow strip for cold TC ECISS/101 forming Technical delivery conditions prEN ISO 10275:2013 Data Limite: 2014-02-05 Metallic materials Sheet and strip Determination of tensile strain hardening exponent TC ECISS/109 (ISO 10275:2007) prEN 10338:2014 Data Limite: 2014-05-05 Hot rolled and cold rolled non-coated products of multiphase steels for cold forming Technical delivery TC ECISS/102 conditions prCEN/TR 10362:2014 Data Limite: 2014-04-06 Chemical analysis of ferrous materials Determination of selenium in steels Electrothermal atomic absorption TC ECISS/109 spectrometric method prEN 10346:2014 Data Limite: 2014-04-09 Continuously hot-dip coated steel flat products Technical delivery conditions TC ECISS/102 Data Limite: 2014-04-06 prEN 10361:2013 Alloyed steels Determination of Nickel content TC ECISS/110 Inductively coupled plasma optical emission prEN 10217-7:2013 spectrometric method Welded steel tubes for pressure purposes Technical Data Limite: 2014-04-28 delivery conditions Part 7: Stainless steel tubes Data Limite: 2014-02-19 TC ECISS/102 prEN ISO 4829-2:2013 TC ECISS/111 Steel and iron Determination of total silicon content - prEN ISO 11970:2013 Reduced molybdosilicate spectrophotometric method Part Specification and approval of welding procedures for 2: Silicon contents between 0,01 and 0,05 % production welding of steel castings (ISO/DIS 4829-2:2013) (ISO/DIS 11970:2013) Data Limite: 2014-05-12
TC ECISS/102 Data Limite: 2014-03-03 prEN ISO 4938:2013 Steel and irons Determination of nickel content Gravimetric or titrimetric method (ISO/DIS 4938:2013) Data Limite: 2014-05-12
TC ECISS/107 prEN 10028-7:2013 Flat products made of steels for pressure purposes Part 7: Stainless steels
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 46 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
5.2 Questionários preliminares
Lista de documentos de referência (RD) objeto de Questionários Preliminares (PQ), com vista à sua aceitação como normas europeias.
LISTA VAZIA
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 47 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
5.3 Comités Técnicos do CEN
Lista dos Comités Técnicos do Comité Europeu de Normalização (CEN) em relação aos quais não existe ONS (Organismo de Normalização Setorial) ou CT (Comissão Técnica) e cujos processos se encontram disponíveis para consulta no IPQ.
AECMA European association of aerospace CEN/TC 130 manufacturers Space heating appliances without integral heat sources CEN/TC 12 Materials, equipment and offshore structures CEN/TC 135 for petroleum and natural gas industries Execution of steel structures
CEN/TC 44 CEN/TC 136 Household refrigerating appliances and Sports, playground and other recreational commercial refrigerated cabinets equipment
CEN/TC 50 CEN/TC 145 Lighting columns and spigots Rubber and plastics machines - Safety
CEN/TC 53 CEN/TC 146 Temporary works equipment Packaging machines - Safety
CEN/TC 87 CEN/TC 148 Gas fuelled smokers lighters Continuous handling equipment and systems - Safety CEN/TC 88 Thermal insulating materials and products CEN/TC 149 Rail-dependent storage and retrieval CEN/TC 89 equipment - Safety Thermal performance of buildings and building components CEN/TC 150 Industrial trucks - Safety CEN/TC 99 Wallcoverings CEN/TC 151 Construction equipment and building CEN/TC 105 material machines - Safety Valves and fittings to equip radiators CEN/TC 152 CEN/TC 107 Fairground and amusement park machinery Pre-fabricated district heating pipe systems and structures - Safety
CEN/TC 113 CEN/TC 153 Heat pumps and air conditioning units Food processing machinery - Safety and hygiene specifications CEN/TC 123 Lasers and laser related equipment CEN/TC 156 Ventilation for buildings CEN/TC 125 Masonry CEN/TC 163 CEN/TC 128 Sanitary appliances Roof covering products for discontinuous laying and products for wall cladding
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 48 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos CEN/TC 166 CEN/TC 197 Chimneys Pumps
CEN/TC 167 CEN/TC 198 Structural bearings Printing and paper machinery - Safety
CEN/TC 169 CEN/TC 200 Lighting applications Tannery machinery - Safety
CEN/TC 171 CEN/TC 201 Heat cost allocation Leather and imitation leather goods and footwear manufacturing machinery - Safety CEN/TC 173 Brushware CEN/TC 202 Foundry machinery CEN/TC 176 Heat meters CEN/TC 216 Chemical disinfectants and antiseptics CEN/TC 177 Prefabricated reinforced components of CEN/TC 217 autoclaved aerated concrete or light-weight Surfaces for sport areas aggregate concrete with open structure CEN/TC 219 CEN/TC 178 Cathodic protection Paving units and kerbs CEN/TC 221 CEN/TC 182 Metallic shop-fabricated tanks Refrigerating systems, safety and environmental requirements CEN/TC 222 Feather and down as filling material for any CEN/TC 183 article, as well as finished articles filled with Waste management feather and down
CEN/TC 186 CEN/TC 225 Industrial thermoprocessing - Safety Bar coding
CEN/TC 188 CEN/TC 226 Conveyor belts Road equipment
CEN/TC 189 CEN/TC 232 Geotextiles and geotextile-related products Compressors - Safety
CEN/TC 190 CEN/TC 239 Foundry technology Rescue systems
CEN/TC 193 CEN/TC 241 Adhesives Gypsum and gypsum based products
CEN/TC 195 CEN/TC 242 Air filters for general air cleaning Safety requirements for passenger transportation by rope
CEN/TC 196 CEN/TC 245 Machines for underground mines - Safety Leisure accommodation vehicles
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 49 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos CEN/TC 247 CEN/TC 291 Controls for mechanical building services Self-service shopping trolleys
CEN/TC 253 CEN/TC 293 Self adhesive tapes Technical aids for disabled persons
CEN/TC 256 CEN/TC 296 Railway applications Tanks for transport of dangerous goods
CEN/TC 259 CEN/TC 297 Medical alarms and signals Free-standing industrial chimneys
CEN/TC 263 CEN/TC 301 Secure storage of cash, valuables and data Electrically propelled road vehicles media CEN/TC 303 CEN/TC 270 Floor screeds and in-situ floorings in buildings Internal combustion engines CEN/TC 305 CEN/TC 271 Potencially explosive atmospheres - Explosion Surface treatment equipment - Safety prevention and protection
CEN/TC 273 CEN/TC 309 Logistics Footwear
CEN/TC 274 CEN/TC 310 Aircraft ground support equipment Advanced manufacturing technologies
CEN/TC 277 CEN/TC 313 Suspended ceilings Industrial centrifugs - Safety requirements (provisional) CEN/TC 278 Road transport and traffic telematics CEN/TC 314 Mastic asphalt for waterproofing CEN/TC 279 Value management - Value analysis, CEN/TC 315 functional analysis Spectator accomodations
CEN/TC 280 CEN/TC 317 Offshore containers Derivates from coal from pyrolisis CEN/TC 318 CEN/TC 283 Hydrometry Precious metals - Application in jewellery and associated products CEN/TC 320 Transportation services CEN/TC 288 Execution of special geotechnical works CEN/TC 322 Equipment for metal production and rolling CEN/TC 289 mills - Safety requirements Leather
CEN/TC 290 CEN/TC 323 Dimensional and geometrical product Raised access floors specification and verification CEN/TC 324 Castors and wheels Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 50 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos
CEN/TC 325 Prevention of crime by urban planning and building design (provisional)
CEN/TC 326 Gas supply for natural gas vehicles (NGV)
CEN/TC 328 Standard measuring system for cleaning performance
CEN/TC 329 Criteria for describing tourist services in objective tourist information systems
CEN/TC 332 Laboratory equipment (provisional)
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 51 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
6. Projetos de normas e propostas de estudo de novas normas do Comité Europeu de Normalização Eletrotécnica (CENELEC)
Os projetos de normas e propostas de estudo de novas normas estão organizadas por Comités Técnicos do CENELEC.
6.1 Projetos em inquérito público
Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários.
SC 9XB SC 31-1 prEN 50502:2013 FprEN 60079-10-2:2013 Railway applications - Rolling stock - Electric equipment Explosive atmospheres Part 10-2:Classification of areas in trolley buses - Safety requirements and connection - Combustible dust atmospheres systems (IEC 60079-10-2:201X) Data Limite: 2014-02-28 Data Limite: 2014-02-28
SC 9XB SC 31-9 FprEN 60310:2014 FprEN 60079-29-3:2014 Railway applications - Traction transformers and Explosive atmospheres Part 29-3:Gas detectors - Guidance inductors on board rolling stock on functional safety of fixed gas detection systems (IEC 60310:201X) (IEC 60079-29-3:201X) Data Limite: 2014-04-11 Data Limite: 2014-03-14
SC 46XA SR 27 prEN 50117-4-2:2014 FprEN 60519-1:2014 Coaxial cables Part 4-2:Sectional specification for Safety in installations for electroheating and CATV cables up to 6 GHz used in cabled distribution electromagnetic processing Part 1:General requirements networks (IEC 60519-1:201X) Data Limite: 2014-06-13 Data Limite: 2014-05-02
SC 46XC SR 27 prEN 50288-9-2:2013 FprEN 62798:2013 Multi-element metallic cables used in analogue and Industrial electroheating equipment - Test methods for digital communication and control Part 9-2:Sectional infrared emitters specification for screened cables characterised from (IEC 62798:201X) 1MHz up to 1 000 MHz - Work area, patch cord and data Data Limite: 2014-03-21 centre cables Data Limite: 2014-05-16 SR 33 FprEN 60871-4:2014 SC 46XC Shunt capacitors for A.C. power systems having a rated prEN 50288-10-2:2013 voltage above 1000 V Part 4:Internal fuses Multi-element metallic cables used in analogue and (IEC 60871-4:201X) digital communication and control Part 10-2:Sectional Data Limite: 2014-03-14 specification for screened cables characteriszed from 1 MHz up to 500 MHz - Horizontal and building backbone SR 34A cables EN 61167:2011 /FprA 1:2013 Data Limite: 2014-05-16 Metal halide lamps - Performance specification (IEC 61167:2011/A1:201X) SC 46XC Data Limite: 2014-02-28 prEN 50288-11-2:2013 Multi-element metallic cables used in analogue and SR 34A digital communication and control Part 11-2:Sectional EN 62560:2012 /FprA 1:2013 specification for un-screened cables, characteriszed Self-ballasted LED-lamps for general lighting services by from 1 MHz up to 500 MHz - Horizontal and building voltage > 50 V - Safety specifications backbone cables (IEC 62560:2011/A1:201X) Data Limite: 2014-05-16 Data Limite: 2014-03-07
SC 46XA SR 46F FprEN 62153-4-7:2014 FprEN 61169-49:2014 Metallic communication cable test methods Part Radio-frequency connectors Part 49:Sectional 4-7:Shielded screening attenuation test method for specification for SMAA series R.F connectors measuring the transfer impedence ZT and the screening (IEC 61169-49:201X) attenuation aS or the coupling attenuation aC of Data Limite: 2014-03-21 RF-Connectors and asemblies up to and above 3 GHz, Tube in tube method SR 47 (IEC 62153-4-7:201X) FprEN 60749-26:2013 Data Limite: 2014-04-11 Semiconductor devices - Mechanical and climatic test methods Part 26:Electrostatic discharge (ESD)
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 52 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos sensitivity testing - Human body model (HBM) (IEC 60749-26:2013) TC 2 Data Limite: 2014-03-07 EN 60034-8:2007 /FprA 1:2013 Rotating electrical machines Part 8:Terminal markings SR 47A and direction of rotation FprEN 62132-1:2014 (IEC 60034-8:2007/A1:201X) Integrated circuits - Measurement of electromagnetic Data Limite: 2014-02-21 immunity Part 1:General conditions and definitions (IEC 62132-1:201X) TC 8X Data Limite: 2014-05-02 FprEN 62559-2:2014 Use case methodology Part 2:Definition of use case SR 48B template, actor list and requirement list FprEN 61076-2-109:2014 (IEC 62559-2:201X) Connectors for electronic equipment - Product Data Limite: 2014-04-11 requirements Part 2-109:Circular connectors - Detail specification for connectors M 12 x 1 with TC 9X screw-locking, for data transmissions with frequencies FprTR 50623:2014 up to 500 MHz Railway applications - Functional Interface (IEC 61076-2-109:201X) Specification - Door System Data Limite: 2014-03-28 Data Limite: 2014-04-25
SR 49 TC 9X FprEN 61338-1-5:2014 prTR 50624:2014 Waveguide type dielectric resonators Part 1-5:General Railway applications - Functional Interface information and test conditions - Measurement method of Specification - Pantograph System conductivity at interface between conductor layer and Data Limite: 2014-04-25 dielectric substrate at microwave frequency (IEC 61338-1-5:201X) TC 9X Data Limite: 2014-04-18 prEN 50121-1:2013 Railway applications - Electromagnetic compatibility SR 56 Part 1:General FprEN 60300-1:2014 Data Limite: 2014-02-28 Dependability management Part 1:Guidance for management and application TC 9X (IEC 60300-1:201X) prEN 50121-2:2013 Data Limite: 2014-04-04 Railway applications - Electromagnetic compatibility Part 2:Emission of the whole railway system to the SR 80 outside world EN 61162-3:2008 /FprA 2:2013 Data Limite: 2014-02-28 Maritime navigation and radiocommunication equipment and systems - Digital interfaces Part 3:Serial data TC 9X instrument network prEN 50121-3-1:2013 (IEC 61162-3:2008/A2:201X) Railway applications - Electromagnetic compatibility Data Limite: 2014-03-07 Part 3-1:Rolling stock - Train and complete vehicle Data Limite: 2014-02-28 SR 86C FprEN 61290-1:2013 TC 9X Optical amplifiers - Test methods Part 1:Optical power prEN 50121-3-2:2013 and gain parameters Railway applications - Electromagnetic compatibility (IEC 61290-1:201X) Part 3-2:Rolling stock - Apparatus Data Limite: 2014-03-07 Data Limite: 2014-02-28
SR 86C TC 9X FprEN 62343-2:2013 prEN 50121-4:2013 Dynamic modules Part 2:Reliability qualification Railway applications - Electromagnetic compatibility (IEC 62343-2:201X) Part 4:Emission and immunity of the signalling and Data Limite: 2014-02-21 telecommunications apparatus Data Limite: 2014-02-28 SR 96 FprEN 61558-2-10:2013 TC 9X Safety of transformers, reactors, power supply units and prEN 50121-5:2013 combinations thereof Part 2-10:Particular requirements Railway applications - Electromagnetic compatibility and tests for separating transformers with high Part 5:Emission and immunity of fixed power supply insulation level and separating transformers with output installations and apparatus voltage exceeding 1000 V Data Limite: 2014-02-28 (IEC 61558-2-10:201X) Data Limite: 2014-02-21 TC 13 FprEN 62053-24:2014 SR 110 Electricity metering equipment (a.c.) - Particular FprEN 61747-2-2:2013 requirements Part 24:Static meters for fundamental Liquid crystal display devices Part 2-2:Matrix colour component reactive energy (classes 0,5 S, 1S and 1) LCD modules - Blank detail specification (IEC 62053-24:201X) (IEC 61747-2-2:201X) Data Limite: 2014-04-04 Data Limite: 2014-02-21
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 53 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos TC 14 3:Quantitative eco design approach through life cycle FprEN 50588-1:2013 assessment including product category rules and the Medium voltage transformers 50 Hz, with highest content of environmental declarations voltage for equipment not exceeding 36 kV Part Data Limite: 2014-02-21 1:General requirenments Data Limite: 2014-04-04 TC 23E FprEN 60898-1:2013 TC 14 Electrical accessories - Circuit-breakers for overcurrent FprEN 50629:2013 protection for household and similar installations Part Energy efficiency of transformers with Um greater than 1:Circuit-breakers for a.c. operation 36 kV (IEC 60898-1:201X) Data Limite: 2014-04-11 Data Limite: 2014-03-21
TC 17B TC 23BX FprEN 60947-4-3:2014 TC 23E Low-voltage switchgear and controlgear Part FprEN 62752:2013 4-3:Contactors and motor-starters - AC semiconductor In-Cable Control and Protection Device for mode 2 controllers and contactors for non-motor loads charging of electric road vehicles (IC-CPD) (IEC 60947-4-3:201X) (IEC 62752:201X) Data Limite: 2014-03-28 Data Limite: 2014-03-07
TC 17AC TC 31 EN 62271-104:2009 /FprA 1:2013 prTR 60079-32-1:2014 High-voltage switchgear and controlgear Part Explosive atmospheres Part 32-1:Electrostatics Hazards 104:Alternating current switches for rated voltages of - Guidance 52 kV and above (IEC/TS 60079-32-1:2013) (IEC 62271-104:2009/A1:201X)) Data Limite: 2014-04-25 Data Limite: 2014-02-07 TC 31 TC 17AC prTR 60079-33:2014 FprEN 62271-201:2013 Explosive atmospheres Part 33:Equipment protection by High-voltage switchgear and controlgear Part 201:AC special protection "s" solid-insulated enclosed switchgear and controlgear for (IEC 60079-33:2012) rated voltages above 1 kV and up to and including 52 Data Limite: 2014-04-25 kV (IEC 62271-201:201X) TC 31 Data Limite: 2014-02-14 FprEN 60079-28:2013 Explosive atmospheres Part 28:Protection of equipment TC 17AC and transmission systems using optical radiation FprEN 62271-211:2014 (IEC 60079-28:201X) High-voltage switchgear and controlgear Part 211:Direct Data Limite: 2014-03-07 connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages above 52 TC 34Z kV EN 60061-1:1993 /FprA 27:2014 (IEC 62271-211:201X) Lamp caps and holders together with gauges for the Data Limite: 2014-03-21 control of interchangeability and safety Part 1:Lamp caps TC 20 (IEC 60061-1:1969/A27:2001, modif) prEN 50577:2013 Data Limite: 2014-05-02 Electric cables - Fire resistence test for unprotected electric cables (P classification) TC 34Z Data Limite: 2014-04-04 FprEN 60238:2013 Edison screw lampholders TC 22X (IEC 60238:201X) FprEN 50598-1:2013 Data Limite: 2014-02-21 Ecodesign for power drive sysrems, motor starters, power electronics & their driven applications Part 1:General TC 34Z requirements for setting energy efficiency standards FprEN 60598-1:2014 for power driven equipment using the extended product Luminaires Part 1:General requirements and tests approach (EPA), and semi analytic model (SAM) (IEC 60598-1:201X) Data Limite: 2014-02-21 Data Limite: 2014-03-21
TC 22X TC 34Z prEN 50598-2:2013 FprEN 60838-1:2013 Ecodesign for power drive sysrems, motor starters, power Miscellaneous lampholders Part 1:General requirements electronics & their driven applications Part 2:Energy and tests efficiency indicators for power drive systems and motor (IEC 60838-1:201X) starers Data Limite: 2014-02-21 Data Limite: 2014-02-21 TC 34Z TC 22X FprEN 62442-2:2014 prEN 50598-3:2013 Energy performance of lamp controlgear Part Ecodesign for power drive sysrems, motor starters, power 2:Controlgear for high intensity discharge lamps electronics & their driven applications Part (excluding fluorescent lamps) - Method of measurement
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 54 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos to determine the efficiency of controlgear TC 61 (IEC 62442-2:201X) EN 60335-2-24:2010 /FprA 2:2014 Data Limite: 2014-03-14 Household and similar electrical appliances - Safety Part 2-24:Particular requirements for refrigerating TC 34Z appliances, ice-cream appliances and ice makers FprEN 62442-3:2014 (IEC 60335-2-24:2010/A2:201X) Energy performance of lamp controlgear Part Data Limite: 2014-04-18 3:Controlgear for halogen lamps and LED modules - Method of measurement to determine the efficiency of TC 61 the controlgear EN 60335-2-31:2012 /FprA A:2013 (IEC 62442-3:201X) Household and similar electrical appliances - Safety Data Limite: 2014-03-14 Part 2-31:Particular requirements for range hoods and other cooking fume extractors TC 44X Data Limite: 2014-03-21 FprEN 62046:2013 Safety of machinery - Application of protective TC 61 equipment to detect the presence of persons EN 60335-2-34:2013 /FprA 1:2014 (IEC 62046:201X) Household and similar electrical appliances - Safety Data Limite: 2014-03-14 Part 2-34:Particular requirements for motor-compressors (IEC 60335-2-34:2012/A1:201X) TC 46X Data Limite: 2014-04-18 prEN 50290-2-33:2013 Communication cables Part 2-33:Common design rules and TC 61 construction - Polythylene insulation for multi element EN 60335-2-56:2003 /FprA 2:2014 metallic data cables for indoor application Househol and similar electrical appliances - Safety Part Data Limite: 2014-04-11 2-56:Particular requirements for projectors and similar appliances TC 46X (IEC 60335-2-56:2002/A2:201X) prEN 50290-2-37:2013 Data Limite: 2014-04-18 Communication cables Part 2-37:Common design rules and construction - Polythylene insulation for coaxial cables TC 61 Data Limite: 2014-04-11 EN 60335-2-58:2005 /FprA 2:2014 Household ans similar electrical appliances - Safety TC 46X Part 2-58:Particular requirements for commercial prEN 50290-2-38:2013 electric dishwashing machines Communication cables Part 2-38:Common design rules and (IEC 60335-2-58:2002/A2:201X) construction - Polythylene insulation for coaxial cables Data Limite: 2014-04-18 Data Limite: 2014-04-11 TC 61 TC 55 EN 60335-2-65:2003 /FprA 2:2014 EN 60851-2:2009 /FprA 1:2014 Household and similar electrical appliances - Safety Part Winding wires - Test methods Part 2:Determination of 2-65:Particular requirements for air-cleaning appliances dimensions (IEC 60335-2-65:2002/A2:201X) (IEC 60851-2:2009/A1:201X) Data Limite: 2014-04-11 Data Limite: 2014-04-18 TC 61 TC 57 FprEN 60335-2-80:2014 FprEN 62361-100:2014 Household and similar electrical appliances - Safety Part Opower systems managment and associated information 2-80:Particular requirements for fans exchange - Interoperability in the long term Part (IEC 60335-2-80:201X) 100:CIM profiles to XML schema mapping Data Limite: 2014-04-18 (IEC 62361-100:201X) Data Limite: 2014-03-21 TC 61 FprEN 60335-2-81:2014 TC 59X Household and similar electrical appliances - Safety prEN 50597:2013 Part 2-81:Particular requirements for foot warmers and Energy consumption of vending machines heating mats Data Limite: 2014-05-09 (IEC 60335-2-81:201X) Data Limite: 2014-04-11 TC 59X FprEN 60312-2:2014 TC 61 Vacuum cleaners for household use Part 2:Wet carpet EN 60335-2-82:2003 /FprA 2:2014 cleaning appliances - Methods of measuring the Household and similar electrical appliances - Safety performance Part 2-82:Particular requirements for amusement (IEC 60312-2:201X) machines and personal service machines Data Limite: 2014-04-18 (IEC 60335-2-82:2002/A2:201X) Data Limite: 2014-04-18 TC 61 FprTR 50417:2013 TC 61 Safety of household and similar electrical appliances - EN 60335-2-89:2010 /FprA 2:2014 Interpretations related to European Standards in the EN Household and similar electrical appliances - Safety Part 60335 series 2-89:Particular requirements for commercial Data Limite: 2014-03-21 refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor)
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 55 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos (IEC 60335-2-89:2010/A2:201X) 30X:Communication Profile Integration - IEC 61784 Data Limite: 2014-04-18 CPF x (IEC 62453-30X:201X) TC 61 Data Limite: 2014-03-14 EN 60335-2-101:2002 /FprA 2:2014 Household and similar electrical appliances - Safety Part TC 65X 2-101:Particular requirements for vaporizers FprEN 62541-3:2014 (IEC 60335-2-101:2002/A2:201X) OPC Unified Architecture Part 3:Address Space Model Data Limite: 2014-04-18 (IEC 62541-3:201X) Data Limite: 2014-04-18 TC 61 FprEN 60335-2-111:2014 TC 65X Household and similar electrical appliances - Safety Part FprEN 62541-4:2014 2-111:Particular requirements for electric ondol mattress OPC Unified Architecture Part 4:Services with a non-flexible heated part (IEC 62541-4:201X) (IEC 60335-2-111:201X) Data Limite: 2014-04-18 Data Limite: 2014-04-11 TC 65X TC 61 FprEN 62541-5:2014 EN 62115:2005 /FprA C:2014 OPC Unified Architecture Part 5:Information model Electric toys - Safety (IEC 62541-5:201X) Data Limite: 2014-04-25 Data Limite: 2014-04-18
TC 62 TC 65X FprEN 60601-2-36:2014 FprEN 62541-6:2014 Medical electrical equipment Part 2-36:Particular OPC Unified Architecture Part 6:Mappings requirements for the basic safety and essential (IEC 62541-6:201X) performance of extracorporeally induced lithotripsy Data Limite: 2014-04-18 (IEC 60601-2-36:201X) Data Limite: 2014-03-14 TC 65X FprEN 62541-7:2014 TC 62 OPC Unified Architecture Part 7:Profiles EN 60601-2-37:2008 /FprA 1:2013 (IEC 62541-7:201X) Medical electrical equipment Part 2-37:Particular Data Limite: 2014-04-18 requirements for the basic safety and essential performance of ultrasonic medical diagnostic and TC 65X monitoring equipment FprEN 62541-8:2014 (IEC 60601-2-37:2007/A1:201X) OPC Unified Architecture Part 8:Data Access Data Limite: 2014-03-21 (IEC 62541-8:201X) Data Limite: 2014-04-18 TC 62 EN 60601-2-54:2009 /FprA 1:2014 TC 65X Medical electrical equipment Part 2-54:Particular FprEN 62541-9:2014 requirements for the basic safety and essential OPC Unified Architecture Part 9:Alarms and conditions performance of X-ray equipment for radiography and (IEC 62541-9:201X) radioscopy Data Limite: 2014-04-18 (IEC 60601-2-54:2009/A1:201X) Data Limite: 2014-04-11 TC 65X FprEN 62541-10:2014 TC 62 OPC Unified Architecture Part 10:Programs EprEN 62366-1:2013 (IEC 62541-10:201X) Medical devices Part 1:Application of usability Data Limite: 2014-04-18 engineering to medical devices (IEC 62366-1:201X) TC 65X Data Limite: 2014-03-21 FprEN 62541-11:2014 OPC Unified Architecture Part 11:Historical Access TC 65X (IEC 62541-11:201X) FprEN 61804-4:2014 Data Limite: 2014-04-18 Function blocks (FB) for process control Part 4:EDD Interoperability TC 65X (IEC 61804-4:201X) FprEN 62541-13:2014 Data Limite: 2014-04-18 OPC Unified Architecture Part 13:Aggregates (IEC 62541-13:201X) TC 65X Data Limite: 2014-04-18 FprEN 62424:2013 Representation of process control engineering - TC 65X Requests in P&I diagrams and data exchange between FprEN 62541-100:2014 P&ID tools and PCE-CAE tools OPC Unified Architecture Specification Part 100:Device (IEC 62424:201X) Interface Data Limite: 2014-03-14 (IEC 62541-100:201X) Data Limite: 2014-04-11 TC 65X FprEN 62453-30X:2013 Field Device Tool (FDT) Interface Specification Part TC 65X
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 56 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos FprEN 62714-1:2014 Devices and integration in enterprise systems:Field Engineering data exchange format for use in industrial Device Integration (FDI) - Profiles Part automation systems engineering- AutomationML Part 103-1:PROFIBUS 1:Architecture and general requirement (IEC 62769-103-1:201X) (IEC 62714-1:201X) Data Limite: 2014-03-21 Data Limite: 2014-03-28 TC 65X TC 65X FprEN 62769-103-4:2013 FprEN 62769-1:2013 Devices and integration in enterprise systems:Field Devices and integration in enterprise systems:Field Device Integration (FDI) - Profiles Part Device Integration Part 1:Overview 103-1:PROFINET (IEC 62769-1:201X) (IEC 62769-103-4:201X) Data Limite: 2014-03-21 Data Limite: 2014-03-21
TC 65X TC 65X FprEN 62769-2:2013 FprEN 62769-109-1:2013 Devices and integration in enterprise systems:Field Devices and integration in enterprise systems:Field Device Integration Part 2:FDI Client Device IntegrationField Device Integration (FDI) - (IEC 62769-2:201X) Profiles Part 109-1:HART® and WirelessHART® Data Limite: 2014-03-21 (IEC 62769-109-1:201X) Data Limite: 2014-03-21 TC 65X FprEN 62769-3:2013 TC 72 Devices and integration in enterprise systems:Field FprEN 60730-2-7:2013 Device Integration Part 3:FDI Server Automatic electrical controls for household and similar (IEC 62769-3:201X) use Part 2-7:Particular requirements for timers and time Data Limite: 2014-03-21 switches (IEC 60730-2-7:201X) TC 65X Data Limite: 2014-02-21 FprEN 62769-4:2013 Devices and integration in enterprise systems:Field TC 72 Device Integration Part 4:FDI Packges EN 60730-2-8:2002 /FprA 2:2013 (IEC 62769-4:201X) Automatic electrical controls for household and similar Data Limite: 2014-03-21 use Part 2-8:Particular requirements for electrically operated water valves, including mechanical TC 65X requirements FprEN 62769-5:2013 (IEC 60730-2-8:2000/A2:201X) Devices and integration in enterprise systems:Field Data Limite: 2014-04-04 Device Integration Part 5:FDI Information Model (IEC 62769-5:201X) TC 76 Data Limite: 2014-03-21 FprEN 60825-1:2014 Safety of laser products Part 1:Equipment classification TC 65X and requirements FprEN 62769-6:2013 (IEC 60825-1:20X1) Devices and integration in enterprise systems:Field Data Limite: 2014-03-14 Device Integration Part 6:Technology Mapping (IEC 62769-6:201X) TC 78 Data Limite: 2014-03-21 prEN 50321:2013 Live working - Footwear for electrical protection - TC 65X Insulating footwear and overboots FprEN 62769-7:2013 Data Limite: 2014-04-18 Devices and integration in enterprise systems:Field Device Integration Part 7:Communication Devices TC 79 (IEC 62769-7:201X) FprTS 50131-9:2013 Data Limite: 2014-03-21 Alarm systems - Intrusion and hold-up systems Part 9:Alarm verification - Methods and principles TC 65X Data Limite: 2014-03-07 FprEN 62769-101-1:2013 Devices and integration in enterprise systems:Field TC 82 Device Integration - Profiles Part 101-1:Foundation FprEN 60904-2:2014 Fieldbus H1 Photovoltaic devices Part 2:Requirements for reference (IEC 62769-101-1:201X) solar devices Data Limite: 2014-03-21 (IEC 60904-2:201X) Data Limite: 2014-04-11 TC 65X FprEN 62769-101-2:2013 TC 82 Devices and integration in enterprise systems:Field FprEN 60904-8:2014 Device Integration (FDI) - Profiles Part Photovoltaic devices Part 8:Measurement of spectral 101-2:Foundation Fieldbus HSE response of a photovoltaic (PV) device (IEC 62769-101-2:201X) (IEC 60904-8:201X) Data Limite: 2014-03-21 Data Limite: 2014-03-21
TC 65X TC 82 FprEN 62769-103-1:2013 FprEN 62116:2013
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 57 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos Test procedure of islanding prevention measures for withdrawal force for rectangular ferrule multi-fibre utility-interconnected photovoltaic inverters connectors (IEC 62116:201X) (IEC 61300-3-51:201X) Data Limite: 2014-02-07 Data Limite: 2014-04-25
TC 82 TC 86BXA FprEN 62670-2:2014 FprEN 61753-042-2:2014 Concentrator photovoltaic (CPV) performance testing Fibre optic interconnecting devices and passive Part 2:Energy measurement components - Performance standard Part (IEC 62670-2:201X) 042-2:Plug-pigtail-style and plug-receptacle-style OTDR Data Limite: 2014-04-25 reflecting devices for category C - Controlled environments TC 82 (IEC 61753-042-2:201X) FprEN 62759-1:2014 Data Limite: 2014-04-25 Transportation testing of photovoltaic (PV) modules Part 1:Transportation and shipping of PV module stacks TC 86BXA (IEC 62759-1:201X) FprEN 61755-1:2013 Data Limite: 2014-04-11 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces TC 86BXA Part 1:Optical interfaces for single-mode non-dispersion prEN 50411-2-10:2013 shifted fibres - General and guidance Fibre organisers and closures to be used in optical fibre (IEC 61755-1:201X) communications systems - Product specifications Part Data Limite: 2014-02-21 2-10:Sealed fibre splice closures type 2, category G, for FTTH optical distribution networks TC 86BXA Data Limite: 2014-02-21 FprEN 61755-2-1:2013 Fibre optic interconnecting devices and passive TC 86A components - Fibre optic connector optical interfaces FprEN 60793-1-20:2014 Part 2-1:Connection of non-dispersion shifted single Optical Fibres Part 1-20:Measurement methods and test mode non-angled physically contacting fibres procedures - Fibre geometry (IEC 61755-2-1:201X) (IEC 60793-1-20:201X) Data Limite: 2014-02-21 Data Limite: 2014-04-11 TC 86BXA TC 86A FprEN 61755-2-2:2013 FprEN 60793-1-43:2014 Fibre optic interconnecting devices and passive Optical fibres Part 1-43:Measurement methods - components - Fibre optic connector optical interfaces Numerical aperture measurement Part 2-2:Connection of non-dispersion shifted (IEC 60793-1-43:201X) single-mode angled physically contacting fibres (APC) Data Limite: 2014-04-11 fibres (IEC 61755-2-2:201X) TC 86A Data Limite: 2014-02-21 FprEN 60794-3-21:2014 Optical fibre cables Part 3-21:Outdoor optical fibre TC 86BXA cables - Product specification for optical FprEN 61755-3-1:2013 self-supporting aerial telecommunication cables for use Fibre optic interconnecting devices and passive in premises cabling components - Fibre optic connector optical interfaces (IEC 60794-3-21:200X) Part 3-1:Connectors with 2,5 mm and 1,25 mm diameter Data Limite: 2014-04-11 cylindrical full zirconia ferrule, non-angled single-modenon-dispersion shifted fibres TC 86BXA (IEC 61755-3-1:201X) FprEN 61300-3-14:2014 Data Limite: 2014-02-21 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part TC 86BXA 3-14:Examinations and measurements - Error and FprEN 61755-3-2:2013 repeatability of the attenuation settings of a variable Fibre optic interconnecting devices and passive optical attenuator components - Fibre optic connector optical interfaces (IEC 61300-3-14:201X) Part 3-2:Connectors with 2,5 mm and 1,25 mm diameter Data Limite: 2014-04-25 cylindrical full zirconia ferrules, angled single-mode non-dispersion shifted fibres TC 86BXA (IEC 61755-3-2:201X) FprEN 61300-3-29:2013 Data Limite: 2014-02-21 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures TC 86BXA Part 3-29:Examinations and measurements - Spectral FprEN 62005-9-1:2013 transfer characteristics of DWDM devices Fibre optic interconnecting devices and passive (IEC 61300-3-29:201X) components - Reliability Part 9-1:Qualification OF of Data Limite: 2014-02-21 passive optic components (IEC 62005-9-1:201X) TC 86BXA Data Limite: 2014-02-21 FprEN 61300-3-51:2014 Fibre optic interconnecting devices and passive TC 88 components - Basic test and measurement procedures Part FprEN 61400-25-3:2014 3-51:Examinations and measurements - Gauge pin Wind turbines Part 25-3:Communications for monitoring
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 58 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos and control of wind power plants - Information TC 116 exchange models EN 62841-2-5:2014 /FprA A:2014 (IEC 61400-25-3:201X) Electric Motor-Operated Hand-Held Tools, Transportable Data Limite: 2014-05-02 Tools and Lawn and Garden Machinery - Safety Part 2-5:Particular requirements for hand-held circular saws TC 94 Data Limite: 2014-03-28 FprEN 62246-1:2013 Weed switches Part 1:Generic specification TC 116 (IEC 62246-1:201X) FprEN 62841-2-9:2014 Data Limite: 2014-03-07 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - TC 108X Safety Part 2-9:Particular requirements for hand-held FprEN 50514:2014 tappers and threaders Audio, video and information technology equipment - (IEC 62841-2-9:201X) Routine electrical safety testing in production Data Limite: 2014-04-18 Data Limite: 2014-06-13 TC 116 TC 111X FprEN 62841-3-6:2014 FprEN 62321-7-1:2013 Electric Motor-Operated Hand-Held Tools, Determination of certain substances in electrotechnical Transportable Tools and Lawn and Garden Machinery - products Part 7-1:Determination of the presence of Safety hexavalent chromium (Cr(VI)) in colorless and colored Part 3-6:Particular requirements for diamond drills with corrosion-protected coatings on metals by the liquid system colorimetric method (IEC 62841-3-6:201X) (IEC 62321-7-1:201X) Data Limite: 2014-03-28 Data Limite: 2014-03-21 TC 116 TC 116 EN 62841-3-6:2014 /FprA A:2014 FprEN 50434:2013 Electric Motor-Operated Hand-Held Tools, Safety of household and similar appliances - Particular Transportable Tools and Lawn and Garden Machinery - requirements for mains operated shredders and chippers Safety Data Limite: 2014-02-21 Part 3-6:Particular requirements for diamond drills with liquid system TC 116 Data Limite: 2014-03-28 EN 60745-2-3:2011 /FprAB :2014 Hand-held motor-operated electric tools - Safety Part TC 205 2-3:Particular requirements for grinders, polishers and prEN 50491-11:2013 disk-type sanders General requirements for Home and Building Electronic Data Limite: 2014-03-14 Systems (HBES) and Building Automation and Control Systems (BACS) Part 11:Smart Metering - Application TC 116 Specifications - Simple External Consumer Display FprEN 62841-2-2:2014 Data Limite: 2014-04-18 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety Part TC 209 2-2:Particular requirements for hand-held screwdrivers FprEN 50083-10-1:2014 and impact wrenches Cable networks for television signals, sound signals and (IEC 62841-2-2:201X) interactive services Part 10-1:Guidelines for the Data Limite: 2014-03-14 implementation of return paths in cable networks Data Limite: 2014-04-25 TC 116 EN 62841-2-2:2014 /FprA A:2014 TC 209 Electric motor-operated hand-held tools, transportable FprEN 50585:2013 tools and lawn and garden machinery - Safety Part Communications protocol to transport satellite delivered 2-2:Particular requirements for hand-held screwdrivers signals over IP networks and impact wrenches Data Limite: 2014-02-14 Data Limite: 2014-03-14 TC 209 TC 116 FprEN 60728-1:2013 FprEN 62841-2-4:2014 Cable networks for television signals, sound signals and Electric Motor-Operated Hand-Held Tools, Transportable interactive services Part 1:System performance of forward Tools and Lawn and Garden Machinery - Safety Part paths 2-4:Particular requirements for hand-held sanders and (IEC 60728-1:201X) polishers other than disc type Data Limite: 2014-02-21 (IEC 62841-2-4:201X) Data Limite: 2014-03-28 TC 209 EN 60728-7-1:2005 /FprA 1:2013 TC 116 Cable networks for television signals, sound signals and FprEN 62841-2-5:2014 interactive services Part 7-1:Hybrid Fibre Coax Outside Electric Motor-Operated Hand-Held Tools, Transportable Plant Status Monitoring - Physical (PHY) Layer Tools and Lawn and Garden Machinery - Safety Part Specification 2-5:Particular requirements for hand-held circular saws (IEC 60728-7-1:2003/A1:201X) (IEC 62841-2-5:201X) Data Limite: 2014-03-21 Data Limite: 2014-03-28 TC 210
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 59 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos FprEN 55011-fragment1:2014 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement - Fraction project f1: Supplement of CISPR 11 withemission requiremtents for GArid Connected Power Cnverters (GCPC) (cispr 11:201X, frag 1) Data Limite: 2014-04-11
TC 210 FprEN 55011-fragment2:2014 Industrial, scientific and medical equipment - Radio frequency disturbance characteristics - Limits and methods of measurement - Fraction project f2: General maintenance (GM) for CISPR 11 Ed.5.1 (2010) Data Limite: 2014-04-11
TC 210 FprEN 55011-fragment4:2014 Industrial, scientific and medical equipment -Radio-frequency disturbance characteristics - Limits and methods of measurement - Fraction project f4: General maintenance (GM) for CISPR 11 Ed.5.1 (2010) (CISPR 11:201X (frag 4)) Data Limite: 2014-04-11
TC 210 FprEN 55011-fragment5:2014 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement - Fraction project f5: Supplement of CISPR 11 with emission requirements for Grid Connected Power Converters (GCPC) (CISPR 11:201X (frag 5)) Data Limite: 2014-04-11
TC 210 FprEN 61000-4-5:2014 Electromagnetic compatibility (EMC) Part 4-5:Testing and measurement techniques - Surge immunity test (IEC 61000-4-5:201X) Data Limite: 2014-03-21
TC 210 FprEN 61000-4-30:2014 Electromagnetic Compatibility (EMC) Part 4-30:Testing and measurement techniques -Power quality measurement methods (IEC 61000-4-30:201X) Data Limite: 2014-04-11
TC 215 prEN 50600-2-4:2013 Information tecchnology - Data centre facilities and infrastructures Part 2-4:Telecommunications Cabling infrastructure Data Limite: 2014-05-09
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 60 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
6.2 Propostas de anulação de Normas
As propostas de anulação de normas estão organizadas por Comités Técnicos do CENELEC.
Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários.
LISTA VAZIA
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 61 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
6.3 Proposta de estudo de novas normas - "Vilamoura Procedures"
Lista de propostas de estudo baseadas em novas normas ou em revisão de normas apresentadas por organismos nacionais membros do CENELEC, com vista à possível elaboração de normas europeias
LISTA VAZIA
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 62 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
6.4 Questionários preliminares
Lista dos Documentos de Referência (RD) objecto de Questionários Preliminares (PQ), com vista à sua aceitação como normas europeias.
LISTA VAZIA
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 63 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
7. Projetos de Normas e Propostas de Estudo de Novas Normas do Comité Europeu de Normalização (CEN) / Comité Europeu de Normalização Eletrotécnica (CENELEC)
7.1 Projetos em inquérito público
Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários.
TC 3 prEN ISO 80369-5:2014 Small bore connectors for liquids and gases in healthcare applications Part 5:Connectors for limb cuff inflation applications (IEC 80369-5:201X) Data Limite: 2014-04-11
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 64 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
8. Projetos de normas do Instituto Europeu de Normalização para as Telecomunicações (ETSI)
8.1 Projetos em inquérito público
Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários.
TC ETSI TC ETSI prEN 300019-1-1:2013 prEN 302065-1:2014 Environmental Engineering (EE); Environmental Electromagnetic compatibility and Radio spectrum conditions and environmental tests for Matters (ERM); Short Range Devices (SRD) using Ultra telecommunications equipment Part 1-1:Classification of Wide Band technology (UWB); Harmonized EN covering environmental conditions; Storage the essential requirements of article 3.2 of the R&TTE Data Limite: 2014-04-21 Directive Part 1:Requirements for Generic UWB applications TC ETSI Data Limite: 2014-04-08 prEN 300019-1-2:2013 Environmental Engineering (EE); Environmental TC ETSI conditions and environmental tests for prEN 302065-2:2014 telecommunications equipment Part 1-2:Classification of Electromagnetic compatibility and Radio spectrum environmental conditions; Transportation Matters (ERM); Short Range Devices (SRD) using Ultra Data Limite: 2014-04-21 Wide Band technology (UWB); Harmonized EN covering the essential requirements of article 3.2 of the R&TTE TC ETSI Directive Part 2:Requirements for UWB location prEN 300019-1-3:2013 tracking Environmental Engineering (EE); Environmental Data Limite: 2014-04-08 conditions and environmental tests for telecommunications equipment Part 1-3:Classification of TC ETSI environmental conditions; Stationary use at prEN 302065-3:2014 weatherprotected locations Electromagnetic compatibility and Radio spectrum Data Limite: 2014-04-21 Matters (ERM); Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonized EN covering the TC ETSI essential requirements of article 3.2 of the R&TTE prEN 300019-1-4:2013 Directive Part 3:Requirements for UWB devices for road Environmental Engineering (EE); Environmental and rail vehicles conditions and environmental tests for Data Limite: 2014-04-08 telecommunications equipment Part 1-4:Classification of environmental conditions; Stationary use at TC ETSI non-weatherprotected locations prEN 302099:2013 Data Limite: 2014-04-21 Environmental Engineering (EE); Powering of equipment in access network TC ETSI prEN 300468:2014 Data Limite: 2014-04-04 Digital Video Broadcasting (DVB); Specification for Service Information (SI) in DVB systems TC ETSI Data Limite: 2014-05-13 prEN 302217-2-2:2013 Fixed Radio Systems; Characteristics and requirements TC ETSI for point-to-point equipment and antennas Part prEN 301502:2013 2-2:Digital systems operating in frequency bands where Global System for Mobile communications (GSM); frequency co-ordination is applied; Harmonized EN Harmonized EN for Base Station Equipment covering the covering the essential requirements of article 3.2 of the essential requirements of article 3.2 of the R&TTE R&TTE Directive Directive Data Limite: 2014-03-26 Data Limite: 2014-03-17 TC ETSI TC ETSI prEN 302217-3:2013 prEN 301545-2:2013 Fixed Radio Systems; Characteristics and requirements Digital Video Broadcasting (DVB); Second Generation for point-to-point equipment and antennas Part DVB Interactive Satellite System (DVB-RCS2) Part 3:Equipment operating in frequency bands where both 2:Lower Layers for Satellite standard frequency coordinated or uncoordinated deployment might Data Limite: 2014-04-01 be applied; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive TC ETSI Data Limite: 2014-03-26 prEN 301908-18:2013 IMT cellular networks; Harmonized EN covering the TC ETSI essential requirements of article 3.2 of the R&TTE prEN 302885-1:2013 Directive Part 18:E-UTRA, UTRA and GSM/EDGE Electromagnetic compatibility and Radio spectrum Multi-Standard Radio (MSR) Base Station (BS) Matters (ERM); Portable Very High Frequency (VHF) Data Limite: 2014-03-17 radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 65 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos handheld class D DSC Part 1:Technical characteristics and methods of measurement Data Limite: 2014-02-24
TC ETSI prEN 302885-3:2013 Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC Part 3:Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive Data Limite: 2014-02-24
TC ETSI prEN 302895:2014 Intelligent Transport Systems (ITS); Vehicular Communications; Basic Set of Applications; Local Dynamic Map (LDM) Data Limite: 2014-05-22
TC ETSI prEN 303039:2014 Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Multichannel transmitter specification for the PMR Service; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive Data Limite: 2014-03-31
TC ETSI prEN 303135:2014 Electromagnetic compatibility and Radio spectrum Matters (ERM); Coastal Survelliance, Vessel Traffic Systems and Harbour Radars (CS/VTS/HR); Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive Data Limite: 2014-05-12
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 66 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
8.2 Propostas de anulação de Normas
Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários.
LISTA VAZIA
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 67 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
9. Projetos de normas e propostas de estudo de novas Normas de Organização Internacional de Normalização (ISO)
Os projetos de normas e propostas de estudo de novas normas estão organizadas por Comités Técnicos da ISO.
9.1 Projetos em inquérito público
Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários.
DIS 16923:2014 Corrugating medium Determination of the edge crush Natural gas fuelling stations CNG stations for fuelling resistance after laboratory fluting vehicles Data Limite: 2014-02-06 Data Limite: 2014-03-24 TC 8 DIS 16924:2013 DIS 17907:2013 Natural gas fuelling stations LNG stations for fuelling Ships and marine technology Single point mooring vehicles arrangements for tankers Data Limite: 2014-03-24 Data Limite: 2014-03-02
TC 2 TC 8 FDIS 4017:2014 DIS 17941:2013 Hexagon head screws Product grades A and B Ships and marine technology Hydraulic hinged watertight Data Limite: 2014-03-09 fireproof doors Data Limite: 2014-02-25 TC 2 FDIS 10683:2013 TC 8 Fasteners Non-electrolytically applied zinc flake coatings DIS 18611-1:2014 Data Limite: 2014-02-19 Ships and marine technology Marine NOx reduction agent AUS 40 Part 1: Quality requirements TC 4 Data Limite: 2014-04-13 FDIS 199:2014 Rolling bearings Thrust bearings Geometrical product TC 8 specification (GPS) and tolerance values DIS 18611-2:2014 Data Limite: 2014-03-20 Ships and marine technology Marine NOx reduction agent AUS 40 Part 2: Test methods TC 4 Data Limite: 2014-04-13 FDIS 492:2014 Rolling bearings Radial bearings Dimensional and TC 8 geometrical tolerances DIS 18611-3:2014 Data Limite: 2014-03-20 Ships and marine technology — Marine NOx reduction agent AUS 40 — Part 3:Handling, TC 4 transportation and storage DIS 3245:2014 Data Limite: 2014-04-13 Rolling bearings Needle roller bearings, drawn cup without inner ring Geometrical product specifications TC 10 (GPS), boundary dimensions and tolerances DIS 17599:2013 Data Limite: 2014-03-09 Technical product documentation (TPD) General requirements of digital mock-up for mechanical products TC 6 Data Limite: 2014-02-09 FDIS 2759:2014 Board Determination of bursting strength TC 17 Data Limite: 2014-03-23 FDIS 4829-2:2013 Steel and irons Determination of total silicon content - TC 6 Reduced molybdosilicate spectrophotometric method Part FDIS 12625-7:2014 2: Silicon contents between 0,01 and 0,05 % Tissue paper and tissue products Part 7: Determination Data Limite: 2014-05-12 of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) TC 17 Data Limite: 2014-03-16 DIS 4938:2013 Steel and irons Determination of nickel content TC 6 Gravimetric or titrimetric method FDIS 13820:2014 Data Limite: 2014-05-12 Paper, board and corrugated fibreboard Description and calibration of compression-testing equipment TC 17 Data Limite: 2014-03-16 DIS 4942:2013 Steel and irons Determination of vanadium content TC 6 N-BPHA spectrophotometric method FDIS 16945:2013 Data Limite: 2014-05-12 Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 68 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos FDIS 17255:2014 TC 17 Space systems Programme management Statement of FDIS 4998:2014 work Continuous hot-dip zinc-coated carbon steel sheet of Data Limite: 2014-03-22 structural quality Data Limite: 2014-03-20 TC 20 DIS 19389:2013 TC 17 Space data and information transfer systems DIS 11949:2014 Conjunction data message Cold-reduced electrolytic tinplate Data Limite: 2014-02-18 Data Limite: 2014-04-09 TC 21 TC 17 FDIS 6182-10:2014 DIS 11950:2014 Fire protection Automatic sprinkler systems Part 10: Cold-reduced electrolytic chromium/chromium Requirements and test methods for domestic sprinklers oxidecoated steel Data Limite: 2014-03-15 Data Limite: 2014-04-09 TC 21 TC 17 DIS 7240-12:2013 DIS 11951:2014 Fire detection and alarm systems Part 12: Line type Cold-reduced blackplate in coil form for the production smoke detectors using a transmitted optical beam of tinplate or electrolytic chromium/chromium Data Limite: 2014-02-04 oxide-coated steel Data Limite: 2014-04-09 TC 21 DIS 7240-15:2013 TC 17 Fire detection and alarm systems Part 15: Point-type fire DIS 11970:2013 detectors using smoke and heat sensors Specification and approval of welding procedures for Data Limite: 2014-02-04 production welding of steel castings Data Limite: 2014-03-03 TC 21 DIS 7240-28:2013 TC 17 Fire detection and alarm systems Part 28: Fire protection FDIS 15510:2014 control equipment Stainless steels Chemical composition Data Limite: 2014-02-04 Data Limite: 2014-03-16 TC 22 TC 17 FDIS 5011:2013 FDIS 16143-2:2014 Inlet air cleaning equipment for internal combustion Stainless steels for general purposes Part 2: engines and compressors Performance testing Corrosion-resistant semi-finished products, bars, rods Data Limite: 2014-02-05 and sections Data Limite: 2014-03-17 TC 22 FDIS 6550-4:2013 TC 17 Road vehicles Sheath-type glowplugs with conical FDIS 16143-3:2014 seating and their cylinder head housing Part 4: M8 x 1 Stainless steels for general purposes Part 3: Wire glow-plugs Data Limite: 2014-03-17 Data Limite: 2014-02-20
TC 20 TC 22 FDIS 10788:2014 DIS 8820-1:2013 Space systems Lunar simulants Road vehicles Fuse-links Part 1: Definitions and general Data Limite: 2014-03-15 test requirements Data Limite: 2014-03-04 TC 20 DIS 16126:2013 TC 22 Space systems Assessment of survivability of unmanned DIS 11451-1:2013 spacecraft against space debris and meteoroid impacts Road vehicles Vehicle test methods for electrical to ensure successful postmission disposal disturbances from narrowband radiated electromagnetic Data Limite: 2014-02-03 energy Part 1: General principles and terminology Data Limite: 2014-02-18 TC 20 DIS 16130:2014 TC 22 Aerospace series Dynamic testing of the locking behaviour DIS 11451-2:2013 of bolted connections under transverse loading conditions Road vehicles Vehicle test methods for electrical (vibration test) disturbances from narrowband radiated electromagnetic Data Limite: 2014-04-29 energy Part 2: Off-vehicle radiation sources Data Limite: 2014-02-18 TC 20 DIS 16679:2013 TC 22 Space Systems Relative motion analysis elements after DIS 11452-1:2013 LV/SC Separation Road vehicles Component test methods for electrical Data Limite: 2014-03-24 disturbances from narrowband radiated electromagnetic Part 1: General principles and terminology TC 20 Data Limite: 2014-02-18
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 69 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos information and use case definition TC 22 Data Limite: 2014-02-12 FDIS 11992-2:2013 Road vehicles Interchange of digital information on TC 22 electrical connections between towing and towed vehicles FDIS 18541-2:2013 Part 2: Application layer for brakes and running gear Road vehicles Standardized access to automotive repair Data Limite: 2014-02-02 and maintenance information (RMI) Part 2: Technical requirements TC 22 Data Limite: 2014-02-12 FDIS 11992-4:2013 Road vehicles Interchange of digital information on TC 22 electrical connections between towing and towed FDIS 18541-3:2013 vehicles Part 4: Diagnostic communication Road vehicles Standardized access to automotive repair Data Limite: 2014-02-02 and maintenance information (RMI) Part 3: Functional user interface requirements TC 22 Data Limite: 2014-02-12 FDIS 12405-3:2014 Electrically propelled road vehicles - Test specification TC 22 for Lithium-ion traction battery packs and systems Part DIS 18541-4:2013 3:Safety performance requirements Road vehicles - Standardized access to automotive Data Limite: 2014-03-16 repair and maintenance information (RMI) Part 4:Conformance test TC 22 Data Limite: 2014-04-28 FDIS 16380:2014 Road Vehicles Blended Fuels Refuelling Connector TC 22 Data Limite: 2014-03-16 FDIS 18542-2:2014 Road vehicles - Standardized repair and maintenance TC 22 information (RMI) terminology Part 2:Standardized DIS 17987-1:2013 process implementation requirements, registration Road vehicles Local Interconnect Network (LIN) Part 1: authority General information and use case definition Data Limite: 2014-03-16 Data Limite: 2014-02-08 TC 22 TC 22 DIS 62752:2013 DIS 17987-2:2013 In-Cable Control and Protection Devices for mode 2 Road vehicles Local Interconnect Network (LIN) Part 2: charging of electric road vehicles (IC-CPD) Transport protocol and network layer services (ISO/IEC 62752:201X) Data Limite: 2014-02-08 Data Limite: 2014-03-06
TC 22 TC 23 DIS 17987-3:2013 ISO 730:2009 /FDAM 1:2012 Road vehicles Local Interconnect Network (LIN) Part 3: Agricultural wheeled tractors Rear-mounted three-point Protocol specification linkage Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4 Data Limite: 2014-02-08 Data Limite: 2014-02-03
TC 22 TC 23 DIS 17987-4:2013 DIS 11001-1:2013 Road vehicles Local Interconnect Network (LIN) Part 4: Agricultural wheeled tractors Three-point hitch couplers Electrical Physical Layer (EPL) specification 12V/24V Part 1: coupler Data Limite: 2014-02-08 Data Limite: 2014-02-04
TC 22 TC 23 DIS 17987-5:2013 DIS 13693-2:2013 Road vehicles Local Interconnect Network (LIN) Part 5: Irrigation equipment Safety devices for chemigation Application Programmers Interface (API) Part 2: Chemigation valve assemblies from DN 75 to Data Limite: 2014-02-08 DN 350 Data Limite: 2014-02-18 TC 22 DIS 17987-6:2013 TC 23 Road vehicles Local Interconnect Network (LIN) Part 6: DIS 16230-1:2013 Protocol conformance test specification Agricultural machinery and tractors Safety of higher Data Limite: 2014-02-08 voltage electrical and electronic components and systems Part 1: General requirements TC 22 Data Limite: 2014-05-19 DIS 17987-7:2013 Road vehicles Local Interconnect Network (LIN) Part 7: TC 23 Electrical Physical Layer (EPL) conformance test DIS 17962:2013 specification Agricultural machinery Equipment for sowing Data Limite: 2014-02-08 Minimization of the environmental effects of fan exhaust from pneumatic systems TC 22 Data Limite: 2014-04-21 FDIS 18541-1:2013 Road vehicles Standardized access to automotive repair TC 23 and maintenance information (RMI) Part 1: General DIS 23253-1:2014
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 70 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos Crop protection equipment Spray deposit test for field Data Limite: 2014-02-05 crop Part 1: Measurement in a horizontal plane Data Limite: 2014-04-09 TC 29 DIS 7738:2013 TC 23 Assembly tools for screws and nuts Combination DIS 24253-2:2014 wrenches Lengths of wrenches and maximum thickness Crop protection equipment Spray deposit test for field of heads crop Part 2: Measurement in a crop Data Limite: 2014-03-02 Data Limite: 2014-04-09 TC 29 TC 24 DIS 9138:2013 FDIS 9276-2:2014 Abrasive grains Sampling and splitting Representation of results of particle size analysis Part Data Limite: 2014-03-02 2: Calculation of average particle sizes/diameters and moments from particle size distributions TC 29 Data Limite: 2014-03-21 FDIS 16462:2014 Cubic boron nitride inserts, tipped or solid Dimensions, TC 24 types DIS 15901-1:2013 Data Limite: 2014-03-27 Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas TC 29 adsorption Part 1: Mercury porosimetry FDIS 16463:2014 Data Limite: 2014-03-16 Polycristalline diamond inserts, tipped Dimensions, types Data Limite: 2014-03-27 TC 28 DIS 4263-3:2013 TC 31 Petroleum and related products Determination of the DIS 18804:2013 ageing behaviour of inhibited oils and fluids using the Rims for agricultural, forestry and construction machines TOST test Part 3: Anhydrous procedure for synthetic Data Limite: 2014-03-16 hydraulic fluids Data Limite: 2014-02-26 TC 31 DIS 18805:2013 TC 28 Tyre classification DIS 6734-4:2013 Data Limite: 2014-03-16 Lubricants, industrial oils and related products (class L) Classification Part 4: Family H (Hydraulic systems) TC 31 Data Limite: 2014-03-03 DIS 18807:2013 Tyres and rims for logging and forestry service TC 28 Data Limite: 2014-03-16 DIS 12917-1:2013 Petroleum and liquid petroleum products Calibration of TC 34 horizontal cylindrical tanks Part 1: Manual methods FDIS 3493:2014 Data Limite: 2014-02-04 Vanilla Vocabulary Data Limite: 2014-03-09 TC 28 DIS 20844:2014 TC 34 Petroleum products and lubricants Determination of the ISO 8589:2007 /FDAM 1:2014 shear stability of polymer-containing oils using a Sensory analysis General guidance for the design of test diesel injector nozzle Complementary element rooms Data Limite: 2014-06-16 AMENDMENT 1 Data Limite: 2014-03-23 TC 29 DIS 2725-1:2014 TC 34 Assembly tools for screws and nuts Square drive sockets DIS 8968-4:2013 Part 1: Hand-operated sockets Milk and milk products Determination of nitrogen content Data Limite: 2014-04-20 Part 4: Determination of protein and non protein nitrogen content and true protein content calculation TC 29 (Reference method) DIS 2725-2:2014 Data Limite: 2014-02-26 Assembly tools for screws and nuts Square drive sockets Part 2: Machine-operated sockets ("impact") TC 34 Data Limite: 2014-04-20 FDIS 11133:2013 Microbiology of food, animal feed and water Preparation, TC 29 production, storage and performance testing of culture DIS 2725-3:2014 media Assembly tools for screws and nuts Data Limite: 2014-02-19 Square drive sockets Part 3: Machine-operated sockets ("non-impact") - Dimensions TC 34 Data Limite: 2014-04-20 DIS 12966-1:2013 Animal and vegetable fats and oils Gas chromatography of TC 29 fatty acid methyl esters Part 1: Guidelines on modern DIS 6103:2013 gas chromatography of fatty acid methy esters Bonded abrasive products Permissible unbalances of Data Limite: 2014-02-26 grinding wheels as delivered Static testing
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 71 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos TC 34 DIS 12966-4:2014 TC 38 Animal and vegetable fats and oils Determination of DIS 3074:2014 methyl esters of fatty acids Part 4: Capillary gas Wool Determination of dichloromethane-soluble matter chromatographic method in combed sliver Data Limite: 2014-06-16 Data Limite: 2014-04-09
TC 34 TC 38 DIS 17604:2014 FDIS 10306:2013 Microbiology of food and animal feed Carcass sampling Textiles Cotton fibres Evaluation of maturity by the air for microbiological analysis flow method Data Limite: 2014-06-16 Data Limite: 2014-02-19
TC 34 TC 38 DIS 18301:2013 DIS 12947-2:2014 Animal and vegetable fats and oils Determination of Textiles Determination of the abrasion resistance of conventional mass per volume (litre weight in air) fabrics by the Martindale method Part 2: Determination Oscillating U-tube method of specimen breakdown Data Limite: 2014-03-24 Data Limite: 2014-06-09
TC 34 TC 38 DIS 18744:2013 FDIS 14389:2013 Microbiology of the food chain Detection and enumeration Textiles Determination of the phthalate content of Cryptosporidium and Giardia in fresh leafy green Tetrahydrofuran method vegetables and berry fruits Data Limite: 2014-02-19 Data Limite: 2014-04-07 TC 38 TC 34 FDIS 15625:2014 DIS 27971:2014 Protein fibres Electronic test method for defects and Cereals and cereal products Common wheat (Triticum evenness of raw silk aestivum L.) Determination of alveograph properties of Data Limite: 2014-03-24 dough at constant hydration from commercial or test flours TC 38 and test milling methodology FDIS 16373-3:2014 Data Limite: 2014-06-09 Textiles Dyestuffs Part 3: Method for determination of certain carcinogenic dyestuffs (method using TC 34 triethylamine /methanol) ISO 29842:2011 /DAM 1:2013 Data Limite: 2014-03-16 Sensory analysis Methodology Balanced incomplete block designs TC 38 AMENDMENT 1 DIS 17299-4:2014 Data Limite: 2014-02-18 Textiles Determination of deodorant property Part 4: Condensation sampling analysis TC 35 Data Limite: 2014-04-13 FDIS 3233-2:2014 Paints and varnishes Determination of the percentage TC 38 volume of nonvolatile matter Part 2: Method using the DIS 18068:2014 determination of nonvolatile-matter content in Cotton fibers Test method for sugar content accordance with ISO 3251 and determination of dry film Spectrophotometry density on coated test panels by the Archimedes principle Data Limite: 2014-04-09 Data Limite: 2014-03-16 TC 39 TC 35 FDIS 230-2:2013 DIS 8502-2:2013 Test code for machine tools Part 2: Determination of Preparation of steel substrates before application of accuracy and repeatability of positioning of numerically paints and related products Tests for the assessment of controlled axes surface cleanliness Part 2: Laboratory determination of Data Limite: 2014-02-09 chloride on cleaned surfaces Data Limite: 2014-03-03 TC 39 DIS 230-7:2014 TC 35 Machine tools Test code for machine tools Part 7: DIS 8502-12:2013 Geometric accuracy of axes of rotation Preparation of steel substrates before application of Data Limite: 2014-04-09 paints and related products Tests for the assessment of surface cleanliness Part 12: Field method for the TC 39 titrimetric determination of watersoluble ferrous ions DIS 13041-5:2014 Data Limite: 2014-03-03 Test conditions for numerically controlled turning machines and turning centres Part 5: Accuracy of feeds, TC 37 speeds and interpolations DIS 24622-1:2013 Data Limite: 2014-04-27 Language resource management Component Metadata Infrastructure Part 1:The Component Metadata Model TC 39 (CMDI-1) FDIS 14955-1:2013 Data Limite: 2014-03-16 Machine tools Environmental evaluation of machine tools
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 72 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos Part 1: Design methodology for energyefficient machine Data Limite: 2014-02-19 tools Data Limite: 2014-02-09 TC 43 FDIS 10844:2014 TC 39 Acoustics Specification of test tracks for measuring noise DIS 16089:2014 emitted by road vehicles and their tyres Machine tools Safety Stationary grinding machines Data Limite: 2014-03-27 Data Limite: 2014-06-16 TC 43 TC 39 FDIS 11200:2014 DIS 16093:2014 Acoustics Noise emitted by machinery and equipment Machine tools Safety Sawing machines for cold metal Guidelines for the use of basic standards for the Data Limite: 2014-06-16 determination of emission sound pressure levels at a work station and at other specified positions TC 39 Data Limite: 2014-03-16 DIS 18217:2014 Safety of woodworking machines Edge-banding machines TC 43 fed chain(s) FDIS 12999-1:2014 Data Limite: 2014-06-16 Acoustics Determination and application of measurement uncertainties in building acoustics Part 1: Sound TC 41 insulation DIS 13050:2013 Data Limite: 2014-03-16 Synchronous belt drives Metric pitch - Curvilinear profile systems G, H, R and S - Belts and pulleys TC 43 Complementary element DIS 16254:2014 Data Limite: 2014-03-02 Acoustics Measurement of minimum noise emitted by road vehicles TC 42 Data Limite: 2014-04-27 DIS 18938:2013 Imaging materials - Optical discs - Care and handling TC 43 for extended storage DIS 16283-2:2013 (ISO 18938:2008) Acoustics Field measurement of sound insulation in Data Limite: 2014-03-03 buildings and of building elements Part 2: Impact sound insulation TC 43 Data Limite: 2014-03-10 DIS 1683:2013 Acoustics Preferred reference values for acoustical and TC 43 vibratory levels ISO 17497-1:2004 /DAM 1:2014 Data Limite: 2014-03-03 Acoustics Sound-scattering properties of surfaces Part 1: Measurement of the random-incidence scattering TC 43 coefficient in a reverberation room DIS 1996-1:2014 AMENDMENT 1 Acoustics Description, measurement and assessment of Data Limite: 2014-04-13 environmental noise Part 1: Basic quantities and assessment procedures TC 44 Data Limite: 2014-04-27 DIS 636:2013 Welding consumables Rods, wires and deposits for TC 43 tungsten inert gas welding of non-alloy and fine-grain DIS 9296:2013 steels Classification Acoustics Declared noise emission values of Data Limite: 2014-02-12 information technology and telecommunications Data Limite: 2014-03-24 TC 44 DIS 3834-5:2014 TC 43 Quality requirements for fusion welding of metallic ISO 10140-1:2010 /FDAM 2:2013 materials Part 5: Documents with which it is necessary Acoustics Laboratory measurement of sound insulation of to conform to claim conformity to the quality building elements Part 1: Application rules for specific requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 products Data Limite: 2014-06-16 AMENDMENT 2: Rainfall sound Data Limite: 2014-02-19 TC 44 DIS 9454-1:2014 TC 43 Soft soldering fluxes Classification and requirements ISO 10140-3:2010 /DAM 2:2013 Part 1: Classification, labelling and packaging Acoustics Laboratory measurement of sound insulation Data Limite: 2014-06-09 of building elements Part 3: Measurement of impact sound insulation - Amendment 2 TC 44 Data Limite: 2014-02-05 FDIS 14114:2013 Gas welding equipment Acetylene manifold systems for TC 43 welding, cutting and allied processes General ISO 10140-5:2010 /FDAM 1:2013 requirements Acoustics Laboratory measurement of sound insulation of Data Limite: 2014-02-05 building elements Part 5: Requirements for test facilities and equipment TC 44 AMENDMENT 1: Rainfall noise DIS 14172:2013
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 73 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos Welding consumables Covered electrodes for manual metal textile-reinforced singlepressure types for hydraulic arc welding of nickel and nickel alloys Classification applications Specification Data Limite: 2014-02-12 Data Limite: 2014-02-09
TC 44 TC 45 FDIS 14555:2013 DIS 18766:2014 Welding Arc stud welding of metallic materials Rubber, vulcanized or thermoplastic Low temperature Data Limite: 2014-02-19 testing General introduction and guide Data Limite: 2014-04-20 TC 44 DIS 15012-4:2013 TC 45 Health and safety in welding and allied processes DIS 19242:2014 Equipment for capture and separation of welding fume Rubber Determination of total sulfur content by ion Part 4: Design requirements chromatography Data Limite: 2014-02-05 Data Limite: 2014-04-20
TC 44 TC 46 DIS 15614-1:2013 FDIS 28560-1:2014 Specification and qualification of welding procedures for Information and documentation - RFID in libraries Part metallic materials Welding procedure test Part 1: Arc and 1:Data elements and general guidelines for gas welding of steels and arc welding of nickel and implementation nickel alloys Data Limite: 2014-03-27 Data Limite: 2014-02-05 TC 46 TC 44 FDIS 28560-2:2014 DIS 15614-7:2013 Information and documentation - RFID in libraries Part Specification and qualification of welding procedures 2:Encoding of RFID data elements based on rules from for metallic materials Welding procedure test Part 7: ISO/IEC 15962 Overlay welding Data Limite: 2014-03-27 Data Limite: 2014-02-26 TC 46 TC 44 FDIS 28560-3:2014 DIS 15614-8:2014 Information and documentation - RFID in libraries Part Specification and qualification of welding procedures for 3:Fixed length encoding metallic materials Welding procedure test Part 8: Welding Data Limite: 2014-03-27 of tubes to tube-plate joints Data Limite: 2014-06-16 TC 48 DIS 384:2013 TC 44 Laboratory glass and plastics ware Principles of design DIS 17632:2013 and construction of volumetric instruments Welding consumables Tubular cored electrodes for gas Data Limite: 2014-03-31 shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels Classification TC 48 Data Limite: 2014-02-12 DIS 3819:2013 Laboratory glassware Beakers TC 44 Data Limite: 2014-03-31 DIS 18278-1:2013 Resistance welding Weldability Part 1: Assessment of TC 48 weldability for resistance spot, seam and projection DIS 4796-1:2013 welding of metallic materials Laboratory glassware Bottles Part 1: Screw-neck bottles Data Limite: 2014-02-26 Data Limite: 2014-03-31
TC 45 TC 48 FDIS 3994:2014 DIS 16496:2013 Plastics hoses Helicalthermoplastic-reinforced Laboratory glassware Vacuum-jacketed vessels for heat thermoplastics hoses for suction and discharge of insulation aqueous materials Specification Data Limite: 2014-03-31 Data Limite: 2014-03-16 TC 54 TC 45 DIS 16385:2013 FDIS 6806:2014 Essential oil of molle (Schinus areira L.), Argentinean Rubber hoses and hose assemblies for use in oil burners type Specification Data Limite: 2014-02-04 Data Limite: 2014-03-30 TC 54 TC 45 FDIS 16928:2014 FDIS 8029:2014 Essential oil of ginger [Zingiber officinale Rosc.] Plastics hose General-purpose collapsible water hose, Data Limite: 2014-03-15 textilereinforced Specification Data Limite: 2014-03-16 TC 58 ISO 11119-2:2012 /DAM 1:2013 TC 45 Gas cylinders Refillable composite gas cylinders and FDIS 18752:2013 tubes - Design, construction and testing Part 2: Fully Rubber hoses and hose assemblies Wire- or wrapped fibre reinforced composite gas cylinders and
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 74 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos tubes up to 450 l with load-sharing metal liners Plastics Determination of the degree of disintegration of AMENDMENT 1 plastic materials under simulated composting conditions Data Limite: 2014-02-11 in a laboratory-scale test Data Limite: 2014-05-19 TC 58 DIS 16964:2014 TC 67 Gas cylinders Flexible hoses assemblies Specification and DIS 13702:2013 testing Petroleum and natural gas industries Control and Data Limite: 2014-04-09 mitigation of fires and explosions on offshore production installations Requirements and guidelines TC 58 Data Limite: 2014-02-26 DIS 17871:2014 Gas cylinders Quick opening valves Specification and TC 67 type testing DIS 19901-5:2013 Data Limite: 2014-06-16 Petroleum and natural gas industries Specific requirements for offshore structures Part 5: Weight TC 59 control during engineering and construction DIS 12006-2:2014 Data Limite: 2014-03-03 Building construction Organization of information about construction works Part 2: Framework for classification TC 69 Data Limite: 2014-04-16 FDIS 3534-4:2013 Statistics Vocabulary and symbols Part 4: Survey TC 61 sampling DIS 4892-1:2014 Data Limite: 2014-02-16 Plastics Methods of exposure to laboratory light sources Part 1: General guidance TC 69 Data Limite: 2014-06-23 DIS 7870-6:2014 Statistical Methods in Process Management Control TC 61 Charts Part 6: EWMA Control Charts ISO 10350-1:2007 /FDAM 1:2014 Data Limite: 2014-04-27 Plastics Acquisition and presentation of comparable single-point data Part 1: Moulding materials TC 69 AMENDMENT 1 DIS 13528:2013 Data Limite: 2014-03-30 Statistical methods for use in proficiency testing by interlaboratory comparisons TC 61 Data Limite: 2014-03-17 DIS 11357-7:2014 Plastics Differential scanning calorimetry (DSC) Part 7: TC 70 Determination of crystallization kinetics DIS 8178-5:2014 Data Limite: 2014-06-30 Reciprocating internal combustion engines Exhaust emission measurement Part 5: Test fuels TC 61 Data Limite: 2014-04-09 FDIS 11443:2013 Plastics Determination of the fluidity of plastics using TC 71 capillary and slit-die rheometers FDIS 13315-2:2014 Data Limite: 2014-02-06 Environmental management for concrete and concrete structures Part 2: System boundary and inventory data TC 61 Data Limite: 2014-03-07 DIS 13802:2013 Plastics Verification of pendulum impact-testing TC 76 machines Charpy, Izod and tensile impact-testing DIS 1135-4:2013 Data Limite: 2014-05-19 Transfusion equipment for medical use Part 4: Transfusion sets for single use, gravity feed TC 61 Data Limite: 2014-03-03 FDIS 15985:2014 Plastics Determination of the ultimate anaerobic TC 76 biodegradation under high-solids anaerobic-digestion DIS 1135-5:2013 conditions Method by analysis of released biogas Transfusion equipment for medical use Part 5: Transfusion Data Limite: 2014-03-16 sets for single use with pressure infusion apparatus Data Limite: 2014-03-03 TC 61 DIS 16616:2013 TC 76 Test methods for Natural Fiber-reinforced Plastic DIS 3826-4:2013 Composite (NFC) Deck Boards Plastics collapsible containers for human blood and Data Limite: 2014-03-24 blood components Part 4: Aphaeresis blood bag systems with integrated features TC 61 Data Limite: 2014-03-10 FDIS 17223:2014 Plastics Determination of yellowness index and change TC 76 in yellowness index DIS 8536-8:2013 Data Limite: 2014-03-17 Infusion equipment for medical use Part 8: Infusion equipment for single use with pressure infusion TC 61 apparatus DIS 20200:2013 Data Limite: 2014-02-26
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 75 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos DIS 9705-1:2014 TC 76 Reaction to fire tests Room corner test for wall and DIS 8536-9:2013 ceiling lining products Part 1: Test method for a small Infusion equipment for medical use Part 9: Fluid lines room configuration for single use with pressure infusion equipment Data Limite: 2014-04-13 Data Limite: 2014-02-26 TC 92 TC 76 DIS 14934-4:2013 DIS 8536-10:2013 Fire tests Calibration and use of heat flux meters Part 4: Infusion equipment for medical use Part 10: Accessories Guidance on the use of heat flux meters in fire tests for fluid lines for single use with pressure infusion Data Limite: 2014-03-10 equipment Data Limite: 2014-02-26 TC 94 DIS 9151:2013 TC 76 Protective clothing against heat and flame Determination DIS 8536-11:2013 of heat transmission on exposure to flame Infusion equipment for medical use Part 11: Infusion Data Limite: 2014-05-12 filters for single use with pressure infusion equipment Data Limite: 2014-02-26 TC 94 DIS 12312-2:2013 TC 85 Eye and face protection Sunglasses and related eyewear DIS 12749-3:2013 Part 2: Filters for direct observation of the sun Nuclear energy, nuclear technologie, and radiological Data Limite: 2014-03-31 protection Vocabulary Part 3: Nuclear fuel cycle Data Limite: 2014-03-17 TC 94 DIS 13506-2:2013 TC 85 Protective clothing against heat and flame Part 2: Skin DIS 16637:2014 burn injury prediction - Calculation requirements and Radiological protection Monitoring and internal test cases dosimetry for staff exposed to medical radionuclides as Data Limite: 2014-02-06 unsealed sources Data Limite: 2014-04-15 TC 94 FDIS 20346:2014 TC 85 Personal protective equipment Protective footwear DIS 20785-3:2013 Data Limite: 2014-03-16 Dosimetry for exposures to cosmic radiation in civilian aircraft Part 3: Measurements at aviation altitudes TC 96 Data Limite: 2014-03-18 DIS 16715:2014 Cranes Hand signals used with cranes TC 86 Data Limite: 2014-03-27 FDIS 817:2014 Refrigerants Designation and safety classification TC 96 Data Limite: 2014-03-08 FDIS 17440:2014 Cranes General design Limit states and proof of TC 86 competence of forged steel hooks DIS 23953-1:2014 Data Limite: 2014-03-30 Refrigerated display cabinets Part 1: Vocabulary Data Limite: 2014-06-09 TC 106 DIS 4823:2013 TC 89 Dentistry Elastomeric impression materials DIS 12460-3:2013 Data Limite: 2014-03-10 Wood-based panels Determination of formaldehyde release Part 3: Gas analysis method TC 106 Data Limite: 2014-04-21 FDIS 9173-3:2014 Dentistry Extraction forceps Part 3: Design and TC 89 dimensions DIS 12460-5:2013 Data Limite: 2014-03-16 Wood-based panels Determination of formaldehyde release Part 5: Extraction method (called the perforator method) TC 106 Data Limite: 2014-04-21 ISO 12836:2012 /DAM 1:2014 Dentistry Digitizing devices for CAD/CAM systems for TC 91 indirect dental restorations Test methods for assessing DIS 17280:2014 accuracy Surface active agents Determination of 1,4-dioxan AMENDMENT 1 residues in surfactants obtained from epoxyethane by Data Limite: 2014-06-09 gas chromatography Data Limite: 2014-04-27 TC 106 DIS 13397-5:2013 TC 92 Dentistry Periodontal curettes, dental scalers and FDIS 3008-2:2013 excavators Part 5: Jacquette scalers Fire-resistance tests Part 2: Lift landing door assemblies Data Limite: 2014-05-12 Data Limite: 2014-02-18 TC 106 TC 92 DIS 22674:2014
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 76 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos Dentistry Metallic materials for fixed and removable Vacuum technology Vocabulary Part 3: Total and restorations and appliances partial pressure vacuum gauges Data Limite: 2014-06-16 Data Limite: 2014-02-23
TC 107 TC 118 DIS 27307:2014 DIS 5393:2013 Evaluation of adhesion/cohesion of plasma sprayed Rotary tools for threaded fasteners Performance test ceramic coatings by scratch testing method Data Limite: 2014-04-27 Data Limite: 2014-02-18
TC 108 TC 118 DIS 7626-2:2014 ISO 28927-5:2009 /DAM 1:2013 Mechanical vibration and shock Experimental Hand-held portable power tools Test methods for determination of mechanical mobility Part 2: Measurements evaluation of vibration emission Part 5: Drills and impact using single-point translation excitation with an attached drills vibration exciter AMENDMENT 1 Data Limite: 2014-04-22 Data Limite: 2014-05-12
TC 108 TC 121 DIS 13379-2:2014 DIS 10079-1:2013 Condition monitoring and diagnostics of machines Data Medical suction equipment Part 1: Electrically powered interpretation and diagnostics techniques Part 2: suction equipment Data-driven applications Data Limite: 2014-05-19 Data Limite: 2014-04-09 TC 121 TC 108 DIS 17510:2013 FDIS 18431-3:2013 Medical devices Sleep apnoea breathing therapy Masks Mechanical vibration and shock Signal processing Part and application accessories 3: Methods of time-frequency analysis Data Limite: 2014-03-16 Data Limite: 2014-02-20 TC 121 TC 108 DIS 18835:2013 FDIS 18436-2:2014 Inhalational anaesthesia systems Draw-over anaesthetic Condition monitoring and diagnostics of machines systems Requirements for qualification and assessment of Data Limite: 2014-02-18 personnel Part 2: Vibration condition monitoring and diagnostics TC 121 Data Limite: 2014-03-22 DIS 23747:2014 Anaesthetic and respiratory equipment Peak expiratory TC 108 flow meters for the assessment of pulmonary function in FDIS 18436-7:2013 spontaneously breathing humans Condition monitoring and diagnostics of machines Data Limite: 2014-06-23 Requirements for qualification and assessment of personnel Part 7: Thermography TC 122 Data Limite: 2014-02-06 DIS 17480:2013 Packaging Accessible design Ease of opening TC 110 Data Limite: 2014-03-03 DIS 11525-2:2014 Rough-terrain trucks User requirements Part 2: Slewing TC 127 variable-reach trucks DIS 8643:2013 Data Limite: 2014-04-13 Earth-moving machinery Hydraulic excavator and backhoe loader lowering control device Requirements and tests TC 110 Data Limite: 2014-05-16 DIS 11525-4:2013 Rough-terrain trucks User requirements Part 4: TC 130 Additional requirements for variable-reach trucks DIS 12646:2014 handling freely suspended loads Graphic technology Displays for colour proofing Data Limite: 2014-02-06 Characteristics Data Limite: 2014-04-27 TC 110 DIS 11525-5:2013 TC 130 Rough-terrain trucks User requirements Part 5: Interface DIS 15339-2:2013 between rough-terrain truck and integrated personnel Graphic technology Printing from digital data across work platform multiple technologies Part 2: Characterized reference Data Limite: 2014-02-06 printing conditions Data Limite: 2014-02-26 TC 110 DIS 18479-2:2013 TC 130 Rough-terrain trucks Non-integrated personnel work DIS 16684-2:2013 platforms Part 2: User requirements Graphic technology Extensible metadata platform Data Limite: 2014-02-06 (XMP) Part 2: Description of XMP schemas using Relax NG TC 112 Data Limite: 2014-03-11 FDIS 3529-3:2013
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 77 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos TC 130 Plastics piping systems for industrial applications DIS 17972-1:2013 Poly(vinylidene fluoride) (PVDF) Specifications for Graphic technology Colour data exchange format Part 1: components and the system Relationship to CxF3 (CxF/X) Data Limite: 2014-02-26 Data Limite: 2014-02-18 TC 138 TC 134 DIS 13951:2013 DIS 17322:2014 Plastics piping systems Test method for the resistance of Fertilizers and soil conditioners Sulfur Coated Urea polyolefin pipe/pipe or pipe/fitting assemblies to tensile (SCU) Analytical methods loading Data Limite: 2014-04-09 Data Limite: 2014-02-05
TC 134 TC 138 DIS 17323:2014 DIS 17778:2013 Fertilizers and soil conditioners Sulfur Coated Urea Plastics piping systems Fittings, valves and ancillaries (SCU) General requirements Determination of gaseous flow rate/pressure drop Data Limite: 2014-04-09 relationships Data Limite: 2014-04-07 TC 135 DIS 12707:2013 TC 142 Non-destructive testing Terminology Terms used in FDIS 10121-1:2013 magnetic particle testing Test method for assessing the performance of gas-phase Data Limite: 2014-03-05 air cleaning media and devices for general ventilation Part 1: Gas-phase air cleaning media TC 135 Data Limite: 2014-02-05 FDIS 12715:2014 Non-destructive testing Ultrasonic testing Reference TC 146 blocks and test procedures for the characterization of FDIS 8672:2014 contact probe sound beams Air quality Determination of the number concentration Data Limite: 2014-03-27 of airborne inorganic fibres by phase contrast optical microscopy Membrane filter method TC 138 Data Limite: 2014-03-22 ISO 4427-1:2007 /DAM 1:2013 Plastics piping systems Polyethylene (PE) pipes and TC 146 fittings for water supply Part 1: General FDIS 12219-5:2014 AMENDMENT 1: Melt mass-flow rate (MFR) for PE 80 Interior air of road vehicles Part 5:Screening method for and PE 100 the determination of the emissions of volatile organic Data Limite: 2014-03-17 compounds from vehicle interior parts and materials - Static chamber method TC 138 Data Limite: 2014-03-16 ISO 4427-2:2007 /FDAM 1:2013 Plastics piping systems Polyethylene (PE) pipes and TC 146 fittings for water supply Part 2: Pipes FDIS 16000-31:2014 AMENDMENT 1 Indoor air Part 31: Measurement of flame retardants and Data Limite: 2014-02-18 plasticizers based on organophosphorus compounds Phosphoric acid ester TC 138 Data Limite: 2014-03-15 DIS 6259-1:2013 Thermoplastics pipes Determination of tensile properties TC 146 Part 1: General test method DIS 16258-1:2013 Data Limite: 2014-02-26 Workplace air Analysis of respirable crystalline silica by x-ray diffraction Part 1: Direct on-filter method TC 138 Data Limite: 2014-02-25 DIS 6259-3:2013 Thermoplastics pipes Determination of tensile properties TC 146 Part 3: Polyolefin pipes DIS 16258-2:2013 Data Limite: 2014-02-26 Workplace air Respirable crystalline silica by x-ray diffraction Part 2: Method by indirect analysis TC 138 Data Limite: 2014-02-25 FDIS 8513:2014 Plastics piping systems Glassreinforced thermosetting TC 146 plastics (GRP) pipes Test methods for the determination of DIS 17621:2014 the apparent initial longitudinal tensile strength Workplace atmospheres Short term detector tube Data Limite: 2014-03-24 measurement systems Requirements and test methods Data Limite: 2014-06-09 TC 138 ISO 8779:2010 /FDAM 1:2014 TC 147 Plastics piping systems Polyethylene (PE) pipes for DIS 9697:2014 irrigation Specifications Water quality Measurement of gross beta activity in AMENDMENT 1 non-saline water Thick source method Data Limite: 2014-03-29 Data Limite: 2014-04-27
TC 138 TC 147 ISO 10931:2005 /DAM 1:2013 FDIS 13165-2:2013
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 78 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos Water quality Radium 226 Part 2: Test method using emanometry TC 160 Data Limite: 2014-02-23 DIS 1288-2:2014 Glass in building Determination of the bending strength of TC 150 glass Part 2: Coaxial double-ring test on flat specimens FDIS 12891-2:2013 with large test surface areas Retrieval and analysis of surgical implants Part 2: Data Limite: 2014-06-09 Analysis of retrieved surgical implants Data Limite: 2014-02-05 TC 160 DIS 1288-3:2014 TC 150 Glass in building Determination of the bending strength DIS 13779-6:2013 of glass Part 3: Test with specimen supported at two Implants for surgery Hydroxyapatite Part 6: Powders points (four-point bending) Data Limite: 2014-03-24 Data Limite: 2014-06-09
TC 150 TC 160 DIS 14242-1:2013 DIS 1288-4:2014 Implants for surgery Wear of total hip-joint prostheses Glass in building Determination of the bending strength Part 1: Loading and displacement parameters for of glass Part 4: Testing of channel-shaped glass wear-testing machines and corresponding environmental Data Limite: 2014-06-09 conditions for test Data Limite: 2014-03-16 TC 160 DIS 1288-5:2014 TC 150 Glass in building Determination of the bending strength of FDIS 14708-1:2014 glass Part 5: Coaxial double-ring test on flat specimens Implants for surgery Active implantable medical devices with small test surface areas Part 1: General requirements for safety, marking and for Data Limite: 2014-06-09 information to be provided by the manufacturer Data Limite: 2014-03-16 TC 161 FDIS 23551-5:2014 TC 153 Safety and control devices for gas burners and DIS 15848-1:2014 gas-burning appliances Particular requirements Part 5: Industrial valves Measurement, test and qualification Manual gas valves procedures for fugitive emissions Part 1: Classification Data Limite: 2014-03-16 system and qualification procedures for type testing of valves TC 161 Data Limite: 2014-06-23 FDIS 23553-1:2014 Safety and control devices for oil burners and TC 153 oil-burning appliances Particular requirements Part 1: DIS 15848-2:2014 Automatic and semi-automatic valves Industrial valves Measurement, test and qualification Data Limite: 2014-03-16 procedures for fugitive emissions Part 2: Production acceptance test of valves TC 163 Data Limite: 2014-06-23 FDIS 15758:2013 Hygrothermal performance of building equipment and TC 156 industrial installations Calculation of water vapour FDIS 17081:2013 diffusion Cold pipe insulation systems Method of measurement of hydrogen permeation and Data Limite: 2014-02-19 determination of hydrogen uptake and transport in metals by an electrochemical technique TC 163 Data Limite: 2014-02-12 DIS 16956:2014 Thermal Performance in the Built Environment TC 156 Determination of Air Flow Rate in Building DIS 17093:2013 Applications by Field Measuring Methods Corrosion of Metals and Alloys Guidelines for corrosion Data Limite: 2014-04-21 test by electrochemical noise measurements Data Limite: 2014-03-09 TC 164 FDIS 17340:2014 TC 156 Metallic materials Ductility testing High speed DIS 18086:2013 compression test for porous and cellular metals Corrosion of metals and alloys Determination of AC Data Limite: 2014-03-21 corrosion Protection criteria Data Limite: 2014-02-28 TC 165 FDIS 10983:2013 TC 158 Timber Finger joints Minimum production requirements DIS 7504:2013 and testing methods Gas analysis Vocabulary Data Limite: 2014-02-17 Data Limite: 2014-05-16 TC 165 TC 160 FDIS 13910:2014 DIS 1288-1:2014 Timber structures Strength graded timber Test methods Glass in building Determination of the bending strength for structural properties of glass Part 1: Fundamentals of testing glass Data Limite: 2014-03-22 Data Limite: 2014-06-09
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 79 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos TC 165 equipment Test methods for laser beam power (energy) FDIS 17754:2014 density distribution Timber structures Test methods Torsional resistance of Data Limite: 2014-06-30 driving in screws Data Limite: 2014-03-27 TC 172 DIS 17901-1:2014 TC 168 Optics and photonics Holography Part 1: Methods of DIS 8549-4:2013 measuring diffraction efficiency and associated optical Prosthetics and orthotics Vocabulary Part 4: Terms characteristics of holograms relating to limb amputation Data Limite: 2014-04-30 Data Limite: 2014-02-20 TC 172 TC 168 DIS 17901-2:2014 DIS 13405-1:2013 Optics and photonics Holography Part 2: Methods for Prosthetics and orthotics Classification and description measurement of hologram recording characteristics of prosthetic components Part 1: Classification of Data Limite: 2014-04-30 prosthetic components Data Limite: 2014-02-20 TC 172 DIS 19012-3:2013 TC 168 Microscopes Designation of microscope objectives Part DIS 13405-2:2013 3: Spectral transmittance Prosthetics and orthotics Classification and description Data Limite: 2014-03-16 of prosthetic components Part 2: Description of lower-limb prosthetic components TC 173 Data Limite: 2014-02-20 DIS 10865-2:2013 Wheelchair containment and occupant retention systems TC 168 for accessible transport vehicles designed for use by DIS 13405-3:2013 both sitting and standing passengers Part 2: Systems for Prosthetics and orthotics Classification and description forward-facing wheelchair-seated passengers of prosthetic components Part 3: Description of Data Limite: 2014-03-23 upper-limb prosthetic components Data Limite: 2014-02-20 TC 173 DIS 16840-6:2014 TC 168 Wheelchair seating Part 6: Simulated use and DIS 29783-2:2013 determination of the changes in properties - Seat Prosthetics and orthotics Vocabulary Part 2: Prosthetic cushions gait Data Limite: 2014-04-09 Data Limite: 2014-02-20 TC 180 TC 172 FDIS 22975-3:2014 ISO 8624:2011 /DAM 1:2014 Solar energy Collector components and materials Part Ophthalmic optics Spectacle frames Measuring system 3:Absorber surface durability and terminology Data Limite: 2014-03-09 AMENDMENT 1 Data Limite: 2014-06-16 TC 181 FDIS 8124-2:2013 TC 172 Safety of toys Part 2: Flammability FDIS 10109:2014 Data Limite: 2014-02-05 Optics and photonics Guidance for the selection of environmental tests TC 181 Data Limite: 2014-03-21 ISO 8124-3:2010 /DAM 1:2013 Safety of toys Part 3: Migration of certain elements TC 172 AMENDMENT 1 DIS 10322-1:2014 Data Limite: 2014-02-09 Ophthalmic optics Semi-finished spectacle lens blanks Part 1: Specifications for single-vision and multifocal TC 183 lens blanks DIS 13547-1:2014 Data Limite: 2014-06-16 Copper, lead, zinc and nickel sulfide concentrates Determination of arsenic Part 1: Iron hydroxide TC 172 concentration and inductively coupled plasma atomic DIS 10322-2:2014 emission spectrometric method Ophthalmic optics Semi-finished spectacle lens blanks Data Limite: 2014-04-22 Part 2: Specifications for progressive-power and degressive-power lens blanks TC 183 Data Limite: 2014-06-16 DIS 13547-2:2014 Copper, lead, zinc and nickel sulfide concentrates TC 172 Determination of arsenic Part 2: Acid digestion and FDIS 10343:2014 inductively-coupled plasma atomic emission Ophthalmic instruments Ophthalmometers spectrometric method Data Limite: 2014-03-23 Data Limite: 2014-04-22
TC 172 TC 188 DIS 13694:2014 ISO 10240:2004 /DAM 1:2013 Optics and optical instruments Lasers and laser-related Small craft Owner’s manual
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 80 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos AMENDMENT 1 FDIS 11952:2014 Data Limite: 2014-03-24 Surface chemical analysis Scanningprobe microscopy Determination of geometric quantities using SPM: TC 188 Calibration of measuring systems DIS 18854:2013 Data Limite: 2014-03-22 Small craft Reciprocating internal combustion engines exhaust emission measurement Test-bed measurement of TC 204 gaseous and particulate exhaust emissions FDIS 11270:2014 Data Limite: 2014-02-26 Intelligent transport systems Lane keeping assistance systems (LKAS) Performance requirements and test TC 188 procedures DIS 19009:2013 Data Limite: 2014-03-20 Small craft Electric navigation lights Performance Data Limite: 2014-04-07 TC 204 DIS 12813:2013 TC 188 Electronic fee collection Compliance check ISO 21487:2012 /DAM 1:2013 communication for autonomous systems Small craft Permanently installed petrol and diesel fuel Data Limite: 2014-05-12 tanks Amendment 1 TC 204 Data Limite: 2014-02-26 DIS 13141:2013 Electronic fee collection Localisation augmentation TC 188 communication for autonomous systems ISO 25197:2012 /DAM 1:2013 Data Limite: 2014-05-12 Small craft Electrical/electronic control systems for steering, shift and throttle TC 204 Amendment 1 DIS 13185-2:2014 Data Limite: 2014-02-26 Intelligent transport systems Vehicle interface for provisioning and support of ITS services Part 2: Unified TC 190 gateway protocol (UGP) requirements and specification DIS 11074:2013 for vehicle ITS station gateway (V-ITS-SG) interface Soil quality Vocabulary Data Limite: 2014-04-27 Data Limite: 2014-02-26 TC 204 TC 190 ISO 14906:2011 /DAM 1:2013 FDIS 17184:2014 Electronic fee collection Application interface Soil quality Determination of carbon and nitrogen by definition for dedicated short-range communication near-infrared spectrometry (NIRS) Data Limite: 2014-03-10 Data Limite: 2014-03-23 TC 204 TC 195 DIS 17575-1:2013 DIS 13105-1:2014 Electronic fee collection Application interface Building construction machinery and equipment Machinery definition for autonomous systems Part 1: Charging for concrete surface floating and finishing Part 1: Terms Data Limite: 2014-02-26 and commercial specifications Data Limite: 2014-04-14 TC 204 DIS 17575-2:2013 TC 195 Electronic fee collection Application interface DIS 13105-2:2014 definition for autonomous systems Part 2: Communication Building construction machinery and equipment Machinery and connection to the lower layers for concrete surface floating and finishing Part 2: Safety Data Limite: 2014-05-12 requirements and verification Data Limite: 2014-04-14 TC 204 DIS 17575-3:2013 TC 195 Electronic fee collection Application interface DIS 21873-1:2013 definition for autonomous systems Part 3: Context data Building construction machinery and equipment Mobile Data Limite: 2014-05-12 crushers Part 1: Terminology and commercial specifications TC 204 Data Limite: 2014-03-02 DIS 17575-4:2013 Electronic fee collection Application interface TC 199 definition for autonomous systems Part 4: Roaming DIS 14122-3:2013 Data Limite: 2014-05-12 Safety of machinery Permanent means of access to machinery Part 3: Stairs, stepladders and guard-rails TC 205 Data Limite: 2014-05-12 FDIS 16484-5:2013 Building automation and control systems (BACS) Part TC 199 5: Data communication protocol DIS 14122-4:2014 Data Limite: 2014-02-05 Safety of machinery Permanent means of access to machinery Part 4: Fixed ladders TC 205 Data Limite: 2014-06-16 FDIS 16484-6:2013 Building automation and control systems (BACS) Part TC 201 6: Data communication conformance testing
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 81 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos Data Limite: 2014-02-05 TC 215 TC 206 DIS 17090-2:2014 FDIS 17094:2014 Health informatics Public key infrastructure Part 2: Fine ceramics (advanced ceramics, advanced technical Certificate profile ceramics) Test method for antibacterial activity of Data Limite: 2014-04-16 semiconducting photocatalytic materials under indoor lighting environment TC 218 Data Limite: 2014-03-22 DIS 738:2013 Coniferous sawn timber Sizes Permissible deviations and TC 206 shrinkage DIS 17860:2013 Data Limite: 2014-03-02 Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of drying loss of ceramic TC 218 granules DIS 8903:2013 Data Limite: 2014-02-21 Broadleaved sawn timber Nominal sizes Data Limite: 2014-03-02 TC 206 DIS 17861:2013 TC 219 Fine ceramics (advanced ceramics, advanced technical DIS 9405:2013 ceramics) Measurement method of spectral transmittance Textile floor coverings Assessment of changes in of fine ceramics thin films under humid condition appearance Data Limite: 2014-02-04 Data Limite: 2014-03-10
TC 206 TC 219 DIS 17942:2013 DIS 12951:2013 Fine ceramics (advanced ceramics, advanced technical Textile floor coverings Determination of mass loss, ceramics) Methods for chemical analysis of boron fibre bind and stair nosing appearance change using the nitride powders Lisson Tretrad machine Data Limite: 2014-03-11 Data Limite: 2014-03-23
TC 206 TC 219 DIS 17947:2013 DIS 24338:2013 Fine ceramics (advanced ceramics, advanced technical Laminate floor coverings Determination of abrasion ceramics) Methods for chemical analysis of fine silicon resistance nitride powders Data Limite: 2014-03-23 Data Limite: 2014-03-11 TC 220 TC 206 DIS 20421-2:2013 DIS 18061:2013 Cryogenic vessels Large transportable vacuum-insulated Fine Ceramics (Advanced Ceramics, Advanced Technical vessels Part 2: Operational requirements Ceramics) Determination of antiviral activity of Data Limite: 2014-02-19 semiconducting photocatalytic materials Test method using bacteriophage Q-beta TC 220 Data Limite: 2014-03-06 DIS 21009-2:2013 Cryogenic vessels Large transportable vacuum-insulated TC 207 vessels Part 2: Operational requirements DIS 14046:2013 Data Limite: 2014-02-19 Environmental management Water footprint Principles, requirements and guidelines TC 220 Data Limite: 2014-02-16 DIS 21029-2:2014 Cryogenic vessels Transportable vacuum insulated vessels TC 211 of not more than 1 000 litres volume Part 2: Operational DIS 19109:2013 requirements Geographic information Rules for application schema Data Limite: 2014-03-23 Data Limite: 2014-03-10 TC 226 TC 211 DIS 18842:2014 DIS 19110:2013 Aluminium oxide primarily used for the production of Geographic information Methodology for feature aluminium Method for the determination of tapped and cataloguing untapped density Data Limite: 2014-02-05 Data Limite: 2014-04-13
TC 214 TC 226 FDIS 18893:2013 DIS 18843:2014 Mobile elevating work platforms Safety principles, Aluminium oxide primarily used for the production of inspection, maintenance, and operation aluminium Method for the determination of flow time Data Limite: 2014-02-11 Data Limite: 2014-04-13
TC 215 TC 228 DIS 16278:2014 DIS 13687:2014 Health informatics Categorial structure for Yacht Harbours - Minimum Requirements terminologies systems of human anatomy (ISO 13687:201X) Data Limite: 2014-06-30 Data Limite: 2014-05-05
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 82 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos TC IULTCS TC 238 DIS 19076:2014 DIS 18122:2013 Leather Measurement of leather surface Using electronic Solid biofuels Determination of ash content techniques Data Limite: 2014-02-19 Data Limite: 2014-06-16
TC 238 TC CIE DIS 18123:2013 FDIS 19476:2013 Solid biofuels Determination of the content of volatile Characterization of the performance of illuminance matter meters and luminance meters Data Limite: 2014-02-19 Data Limite: 2014-04-06
TC 238 DIS 18134-1:2013 Solid biofuels Determination of moisture content - Oven dry method Part 1: Total moisture - Reference method Data Limite: 2014-02-19
TC 238 DIS 18134-2:2013 Solid biofuels Determination of moisture content - Oven dry method Part 2: Total moisture - Simplified method Data Limite: 2014-02-20
TC 238 DIS 18134-3:2013 Solid biofuels Determination of moisture content - Oven dry method Part 3: Moisture in general analysis simple Data Limite: 2014-02-19
TC 242 DIS 50004:2014 Energy management systems Guidance for the implementation, maintenance and improvement of an energy management system Data Limite: 2014-04-20
TC 242 DIS 50006:2014 Energy management systems Measuring energy performance using energy baselines (EnB) and energy performance indicators (EnPI) General principles and guidance Data Limite: 2014-04-20
TC 249 FDIS 17217-1:2013 Traditional Chinese medicine Ginseng seeds and seedlings Part 1: Panax ginseng CA Meyer Data Limite: 2014-02-20
TC 257 DIS 17742:2013 Energy Efficiency and Savings calculation for Countries, Regions and Cities Data Limite: 2014-03-12
TC 257 DIS 17743:2013 Energy savings Definition of a methological framework applicable to calculation and reporting on energy savings Data Limite: 2014-03-12
TC 271 DIS 19600:2014 Compliance management systems Guidelines Data Limite: 2014-04-21
TC IULTCS DIS 3379:2013 Leather Determination of distension and strength of surface (Ball burst method) Data Limite: 2014-02-26
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 83 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
9.2 Comités Técnicos da ISO
Lista dos Comités Técnicos da Organização Internacional de Normalização (ISO) em relação aos quais não existe ONS (Organismo de Normalização Sectorial) ou CT (Comissão Técnica) e cujos processos se encontram disponíveis para consulta no IPQ
Manganese and chromium ores ISO/TC 4 Rolling bearings ISO/TC 67 Materials, equipment and offshore structures ISO/TC 12 for petroleum and natural gas industries Quantities, units, symbols, conversion factors ISO/TC 70 ISO/TC 14 Internal combustion engines Shafts for machinery and accessories ISO/TC 81 ISO/TC 19 Common names for pesticides and other Preferred numbers agrochemicals
ISO/TC 20 ISO/TC 83 Aircraft and space vehicles Sports and recreation equipment
ISO/TC 24 ISO/TC 85 Sieves, sieving and other sizing methods Nuclear energy
ISO/TC 25 ISO/TC 86 Cast iron and pig iron Refrigeration
ISO/TC 36 ISO/TC 100 Cinematography Chains and chain wheels for power transmission and conveyors ISO/TC 37 Terminology (principles and coordination) ISO/TC 101 Continuous mechanical handling equipment ISO/TC 41 Pulleys and belts (including veebelts) ISO/TC 102 Iron ores ISO/TC 42 Photography ISO/TC 110 Industrial trucks ISO/TC 47 Chemistry ISO/TC 112 Vacuum technology ISO/TC 48 Laboratory glassware and related apparatus ISO/TC 113 Hydrometric determinations ISO/TC 57 Metrology and properties of surfaces ISO/TC 114 Horology ISO/TC 59 Building construction ISO/TC 115 Pumps ISO/TC 60 Gears ISO/TC 116 ISO/TC 65 Space heating appliances Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 84 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos Technical systems and aids for disabled or ISO/TC 117 handicapped persons Industrial fans ISO/TC 174 Jewellery ISO/TC 118 Compressors, pneumatic tools and ISO/TC 175 pneumatic machines Fluorspar
ISO/TC 119 ISO/TC 177 Powder metallurgy Caravans ISO/TC 179 ISO/TC 120 Leather Masonry ISO/TC 182 ISO/TC 123 Geotechnics Plain bearings ISO/TC 183 ISO/TC 127 Copper, lead and zinc ores and concentrates Earth-moving machinery ISO/TC 184 ISO/TC 131 Industrial automation systems and integration Fluid power systems ISO/TC 185 ISO/TC 132 Safety devices for protection against Ferroalloys excessive pressure
ISO/TC 137 ISO/TC 190 Sizing system, designations and marking for Soil quality boots and shoes ISO/TC 191 ISO/TC 153 Humane animal (mammal) traps Valves ISO/TC 192 ISO/TC 154 Gas turbines Documents and data elements in administration, commerce and industry ISO/TC 195 Building construction machinery and ISO/TC 155 equipment Nickel and nickel alloys ISO/TC 197 ISO/TC 163 Hydrogen energy technologies Thermal insulation ISO/TC 202 ISO/TC 166 Microbeam analysis Ceramic ware, glassware and glass ceramic ware in contact with food ISO/TC 203 Technical energy systems ISO/TC 167 Steel and aluminium structures ISO/TC 204 Transport information and control systems ISO/TC 170 Surgical instruments ISO/TC 205 ISO/TC 173 Building environmental design
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 85 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos ISO/TC 206 Fine ceramics
ISO/TC 207 Management environnemental
ISO/TC 208 Thermal turbines for industrial application (steam turbines, gas expansion turbines)
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 86 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
10. Projetos de normas e propostas de estudo de novas normas da Comissão Eletrotécnica Internacional (IEC)
Os projetos de normas e propostas de estudo de novas normas estão organizadas por Comités Técnicos.
10.1 Projetos em inquérito público
Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários.
SC 17C Data Limite: 2014-03-21 FDIS 62271-211:2014 High-voltage switchgear and controlgear Part 211:Direct SC 34B connection between power transformers and gas-insulated CDV 60838-1:2013 metal-enclosed switchgear for rated voltages above 52 Miscellaneous lampholders Part 1:General requirements kV and tests Data Limite: 2014-03-21 Data Limite: 2014-02-21
SC 17A SC 34A CDV 62271-37-013:2014 IEC 61167:2011 /CDV A1:2013 High-voltage switchgear and controlgear Part Metal halide lamps - Performance specification 37-013:Alternating current generator circuit-breakers Data Limite: 2014-02-28 Data Limite: 2014-04-25 SC 34C SC 18A FDIS 62442-2:2014 CDV 60092-350:2013 Energy performance of lamp controlgear Part Electrical installations in ships Part 350:General 2:Controlgear for high intensity discharge lamps construction and test methods of power, control and (excluding fluorescent lamps) - Method of measurement to instrumentation cables for shipboard and offshore determine the efficiency of the controlgear applications Data Limite: 2014-03-14 Data Limite: 2014-03-14 SC 34C SC 18A FDIS 62442-3:2014 FDIS 60092-360:2014 Energy performance of lamp controlgear Part Electrical installations in ships Part 360:Insulating and 3:Controlgear for halogen lamps and LED modules - sheathing materials for shipboard and offshore units, Method of measurement to determine the efficiency of power, control, instrumentation and telecommunication the controlgear cables Data Limite: 2014-03-14 Data Limite: 2014-03-21 SC 34A SC 23E IEC 62560:2011 /CDV A1:2013 CDV 60898-1:2013 Self-ballasted LED-lamps for general lighting services by Electrical accessories - Circuit-breakers for overcurrent voltage > 50 V - Safety specifications protection for household and similar installations Part Data Limite: 2014-03-07 1:Circuit-breakers for a.c. operation Data Limite: 2014-03-21 SC 45B CDV 61017:2014 SC 23E Radiation protection instrumentation - Transportable, CDV 62752:2013 mobile or installed equipment to measure photon In-Cable Control and Protection Device for mode 2 radiation for environmental monitoring charging of electric road vehicles (IC-CPD) Data Limite: 2014-04-11
Data Limite: 2014-03-07 SC 45B FDIS 62694:2013 SC 31J Radiation protection instrumentation - Backpack-type CDV 60079-10-2:2013 radiation detector (BRD) for detection of illicit Explosive atmospheres Part 10-2:Classification of areas trafficking of radioactive material - Combustible dust atmospheres Data Limite: 2014-02-21 Data Limite: 2014-02-28 SC 45A SC 34B CDV 62808:2014 CDV 60238:2013 Nuclear power plants - Instrumentation and control Edison screw lampholders systems important to safety - Design and qualification of Data Limite: 2014-02-21 isolation devices Data Limite: 2014-05-09 SC 34D FDIS 60598-1:2014 SC 45A Luminaires Part 1:General requirements and tests CDV 62582-5:2014 Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 87 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos Nuclear power plants - Instrumentation and control appliances with an incorporated or remote refrigerant important to safety - Electrical equipment condition unit or compressor monitoring methods Part 5:Optical time domain Data Limite: 2014-04-18 reflectometry Data Limite: 2014-05-09 SC 62D FDIS 60601-2-36:2014 SC 46F Medical electrical equipment Part 2-36:Particular FDIS 61169-49:2014 requirements for the basic safety and essential Radio-frequency connectors Part 49:Sectional performance of equipment for extracorporeally induced specification for SMAA series R.F connectors lithotripsy Data Limite: 2014-03-14 Data Limite: 2014-03-21 SC 62B SC 46A IEC 60601-2-37:2007 /CDV A1:2013 CDV 61196-11:2013 Medical electrical equipment Part 2-37:Particular Coaxial communication cables Part 11:Sectional requirements for the basic safety and essential specification for semi-rigid cables with polyethylene (PE) performance of ultrasonic medical diagnostic and dielectric monitoring equipment Data Limite: 2014-03-14 Data Limite: 2014-03-21
SC 47F SC 62B CDV 62047-15:2014 IEC 60601-2-54:2009 /CDV A1:2014 Semiconductor devices - Micro-electromechanical Medical electrical equipment Part 2-54:Particular devices Part 15:Test method of bonding strength requirements for the basic safety and essential between PDMS and glass performance of X-ray equipment for radiography and Data Limite: 2014-05-09 radioscopy Data Limite: 2014-04-11 SC 47F CDV 62047-16:2014 SC 62B Semiconductor devices - Micro-electromechanical devices FDIS 61331-1:2014 Part 16:Test methods for determining residual stresses Protective devices against diagnostic medical X-radiation of MEMS films; wafer curvature and cantilever beam Part 1:Determination of attenuation properties of deflection method materials Data Limite: 2014-05-09 Data Limite: 2014-04-11
SC 47A SC 62B CDV 62132-1:2014 FDIS 61331-2:2014 Integrated circuits - Measurement of electromagnetic Protective devices against diagnostic medical X-radiation immunity Part 1:General conditions and definitions Part 2:Translucent protective plates Data Limite: 2014-05-02 Data Limite: 2014-04-11
SC 48B SC 62B FDIS 61076-2-109:2014 FDIS 61331-3:2014 Connectors for electronic equipment - Product Protective devices against diagnostic medical X-radiation requirements Part 2-109:Circular connectors - Detail Part 3:Protective clothing, eyewear and protective patient specification for connectors M 12 x 1 with shields screw-locking, for data transmissions with frequencies Data Limite: 2014-04-11 up to 500 MHz Data Limite: 2014-03-28 SC 62A CDV 62366-1:2014 SC 59F Medical devices Part 1:Application of usability CDV 60312-2:2014 engineering to medical devices Vacuum cleaners for household use Part 2:Wet carpet Data Limite: 2014-03-21 cleaning appliances - Methods for measuring the performance SC 62D Data Limite: 2014-04-18 CDV 80369-5:2014 Small bore connectors for liquids and gases in healthcare SC 61C applications Part 5:Connectors for limb cuff inflation IEC 60335-2-24:2010 /CDV A2:2014 applications Household and similar appliances - Safety Part Data Limite: 2014-04-11 2-24:Particular requirements for refrigerating appliances, ice-cream appliances and ice makers SC 62D Data Limite: 2014-04-18 FDIS 80601-2-67:2014 Medical electrical equipment Part 2-67:Particular SC 61C requirements for basic safety and essential performance IEC 60335-2-34:2012 /CDV A1:2014 of oxygen conserving equipment Household and similar electrical appliances - Safety (ISO 80601-2-67:201X) Part 2-34:Particular requirements for motor-compressors Data Limite: 2014-04-11 Data Limite: 2014-04-18 SC 65E SC 61C CDV 61804-4:2014 IEC 60335-2-89:2010 /CDV A2:2014 Function blocks (FB) for process control Part 4:EDD Household and similar electrical appliances - Safety Part interpretation 2-89:Particular requirements for commercial refrigerating Data Limite: 2014-04-18
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 88 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos Data Limite: 2014-03-21 SC 65E CDV 62453-30X:2013 SC 65E Field Device Tool (FDT) Interface Specification Part CDV 62769-2:2013 3X:Communication Profile Integration - IEC 61784 CPF Field Device Integration (FDI) Part 2:FDI Client x Data Limite: 2014-03-21 Data Limite: 2014-03-14 SC 65E SC 65E CDV 62769-3:2013 CDV 62541-3:2014 Field Device Integration (FDI) Part 3:FDI Server OPC Unified Architecture Part 3:Address Space Model Data Limite: 2014-03-21 Data Limite: 2014-04-18 SC 65E SC 65E CDV 62769-4:2013 CDV 62541-4:2014 Field Device Integration (FDI) Part 4:FDI Packages OPC Unified Architecture Part 4:Services Data Limite: 2014-03-21 Data Limite: 2014-04-18 SC 65E SC 65E CDV 62769-5:2013 CDV 62541-5:2014 Field Device Integration (FDI) Part 5:FDI Information OPC Unified Architecture Part 5:Information Model Model Data Limite: 2014-04-18 Data Limite: 2014-03-21
SC 65E SC 65E CDV 62541-6:2014 CDV 62769-6:2013 OPC Unified Architecture Part 6:Mappings Field Device Integration (FDI) Part 6:Technology Data Limite: 2014-04-18 Mapping Data Limite: 2014-03-21 SC 65E CDV 62541-7:2014 SC 65E OPC Unified Architecture Part 7:Profiles CDV 62769-7:2013 Data Limite: 2014-04-18 Field Device Integration (FDI) Part 7:Communication Devices SC 65E Data Limite: 2014-03-21 CDV 62541-8:2014 OPC Unified Architecture Part 8:Data Access SC 65E Data Limite: 2014-04-18 CDV 62769-101-1:2013 Field Device Integration (FDI) - Profiles Part SC 65E 101-1:Foundation Fieldbus H1 CDV 62541-9:2014 Data Limite: 2014-03-21 OPC Unified Architecture Part 9:Alarms and conditions Data Limite: 2014-04-18 SC 65E CDV 62769-101-2:2013 SC 65E Field Device Integration (FDI) - Profiles Part CDV 62541-10:2014 101-2:Foundation Fieldbus HSE OPC Unified Architecture Part 10:Programs Data Limite: 2014-03-21 Data Limite: 2014-04-18 SC 65E SC 65E CDV 62769-103-1:2013 CDV 62541-11:2014 Field Device Integration (FDI) - Profiles Part OPC Unified Architecture Part 11:Historical Access 103-1:PROFIBUS Data Limite: 2014-04-18 Data Limite: 2014-03-21
SC 65E SC 65E CDV 62541-13:2014 CDV 62769-103-4:2013 OPC Unified Architecture Part 13:Aggregates Field Device Integration (FDI) - Profiles Part Data Limite: 2014-04-18 103-4:PROFINET Data Limite: 2014-03-21 SC 65E CDV 62541-100:2014 SC 65E OPC Unified Architecture Specification Part 100:Device CDV 62769-109-1:2013 Interface Field Device Integration (FDI) - Profiles Part Data Limite: 2014-04-11 109-1:HART® and WirelessHART® Data Limite: 2014-03-21 SC 65E FDIS 62714-1:2014 SC 77A Engineering data exchange format for use in industrial IEC 61000-3-2:2005 /FDIS A3:2014 automation systems engineering Part 1:Architecture and Electromagnetic compatibility (EMC) Part 3.2:Limits - General Requirements Limits for harmonic current emissions (equipment input Data Limite: 2014-03-28 current < 16 A per phase) Data Limite: 2014-04-11 SC 65E CDV 62769-1:2013 SC 77B Field Device Integration (FDI) Part 1:Overview FDIS 61000-4-5:2014
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 89 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos Electromagnetic compatibility (EMC) Part 4-5:Testing withdrawal force for rectangular ferrule multi-fibre and measurement techniques - Surge immunity test connectors Data Limite: 2014-03-21 Data Limite: 2014-04-25
SC 77A SC 86B FDIS 61000-4-19:2014 CDV 61753-042-2:2014 Electromagnetic Compatibility (EMC) Part 4-19:Testing Fibre optic interconnecting devices and passive and measurement techniques - Test for immunity to components - Performance standard Part conducted, differential mode disturbances and signalling 042-2:Plug-pigtail-style and plug-receptacle-style OTDR in the frequency range from 2 kHz to 150 kHz, at a.c. reflecting devices for category C - Controlled power ports environments Data Limite: 2014-04-11 Data Limite: 2014-04-25
SC 77A SC 86B CDV 61000-4-30:2014 CDV 61755-1:2013 Electromagnetic Compatibility (EMC) Part 4-30:Testing Fibre optic interconnecting devices and passive and measurement techniques -Power quality components - Fibre optic connector optical interfaces measurement methods Part 1:Optical interfaces for single-mode non-dispersion Data Limite: 2014-04-11 shifted fibres - General and guidance Data Limite: 2014-02-21 SC 86A CDV 60793-1-20:2014 SC 86B Optical fibres Part 1-20:Measurement methods and test CDV 61755-2-1:2013 procedures - Fibre geometry Fibre optic interconnecting devices and passive Data Limite: 2014-04-11 components - Fibre optic connector optical interfaces Part 2-1:Connection of non-dispersion shifted single SC 86A mode non-angled physically contacting fibres CDV 60793-1-43:2014 Data Limite: 2014-02-21 Optical fibres Part 1-43:Measurement methods - Numerical aperture measurement SC 86B Data Limite: 2014-04-11 CDV 61755-2-2:2013 Fibre optic interconnecting devices and passive SC 86A components - Fibre optic connector optical interfaces CDV 60793-2-50:2014 Part 2-2:Connection of non-dispersion shifted Optical fibres Part 2-50:Product specifications - single-mode angled physically contacting (APC) fibres Sectional specification for class B single-mode fibres Data Limite: 2014-02-21 Data Limite: 2014-05-09 SC 86B SC 86A CDV 61755-3-1:2013 CDV 60794-3-21:2014 Fibre optic interconnecting devices and passive Optical fibre cables Part 3-21:Outdoor cables - Product components - Fibre optic connector optical interfaces specification for optical self-supporting aerial Part 3-1:Connectors with 2,5 mm and 1,25 mm diameter telecommunication cables for use in premises cabling cylindrical full zirconia ferrule, non-angled single-mode Data Limite: 2014-04-11 non-dispersion shifted fibres Data Limite: 2014-02-21 SC 86C CDV 61290-1:2013 SC 86B Optical amplifiers - Test methods Part 1:Optical power CDV 61755-3-2:2013 and gain parameters Fibre optic interconnecting devices and passive Data Limite: 2014-03-07 components - Fibre optic connector optical interfaces Part 3-2:Connectors with 2,5 mm and 1,25 mm diameter SC 86B cylindrical full zirconia ferrule, angled single-mode CDV 61300-3-14:2014 non-dispersion shifted fibres Fibre optic interconnecting devices and passive Data Limite: 2014-02-21 components - Basic test and measurement procedures Part 3-14:Examinations and measurements - Error and SC 86B repeatability of the attenuation settings of a variable CDV 61755-3-31:2014 optical attenuator Fibre optic interconnecting devices and passive Data Limite: 2014-04-25 components - Fibre optic connector optical interfaces Part 3-31:Optical interface, 8 degrees angled PC, SC 86B Polyphenylene sulphide rectangular ferrule, single mode FDIS 61300-3-29:2013 fibres Fibre optic interconnecting devices and passive Data Limite: 2014-05-09 components - Basic test and measurement procedures Part 3-29:Examinations and measurements - Spectral SC 86B transfer characteristics of DWDM devices CDV 61755-3-32:2014 (IEC 61300-3-29:201X) Fibre optic interconnecting devices and passive Data Limite: 2014-02-21 components - Fibre optic connector optical interfaces Part 3-32:Optical interface, 8 degrees angled PC, SC 86B thermoset epoxy rectangular ferrule, single mode fibres CDV 61300-3-51:2013 Data Limite: 2014-05-09 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part SC 86B 3-51:Examinations and measurements - Gauge pin CDV 62005-9-1:2013
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 90 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos Fibre optic interconnecting devices and passive components - Reliability Part 9-1:Qualification of TC 9 passive optical components CDV 60310:2014 Data Limite: 2014-02-21 Railway applications - Traction transformers and inductors on board rolling stock SC 86C CDV 62343-2:2013 Data Limite: 2014-04-11 Dynamic modules Part 2:Reliability qualification Data Limite: 2014-02-21 TC 9 CDV 61133:2014 SC 121A Railway Applications - Rolling stock - Testing of rolling FDIS 60947-4-3:2014 stock on completion of construction and before entry into Low-voltage switchgear and controlgear Part service 4-3:Contactors and motor-starters - AC semiconductor Data Limite: 2014-04-18 controllers and contactors for non-motor loads Data Limite: 2014-03-28 TC 13 FDIS 62053-24:2014 SC CISPR/B Electricity metering equipment (a.c.) - Particular CDV 11-f1:2014 requirements Part 24:Static meters for reactive energy at Industrial, scientific and medical equipment - fundamental frequency (classes 0,5 S, 1 S and 1) Radio-frequency disturbance characteristics - Limits Data Limite: 2014-04-04 and methods of measurement - Fraction project f1: Supplement of CISPR 11 with emission requirements TC 18 for Grid Connected Power Converters (GCPC) CDV 61892-5:2013 Data Limite: 2014-04-11 Mobile and fixed offshore units - Electrical installations Part 5:Mobile units SC CISPR/B Data Limite: 2014-02-21 CDV 11-f2:2014 Industrial, scientific and medical equipment - Radio TC 21 frequency disturbance characteristics - Limits and CDV 62485-1:2013 methods of measurement - Fraction project f2: General Safety requirements for secondary batteries and battery maintenance (GM) for CISPR 11 Ed.5.1 (2010) installations Part 1:General safety information Data Limite: 2014-04-11 Data Limite: 2014-03-21
SC CISPR/B TC 21 CDV 11-f4:2014 CDV 62485-4:2013 Industrial, scientific and medical equipment Safety requirements for secondary batteries and battery -Radio-frequency disturbance characteristics - Limits installations Part 4:Valve regulated lead acid batteries and methods of measurement - Fraction project f4: for use in portable appliances General maintenance (GM) for CISPR 11 Ed.5.1 (2010) Data Limite: 2014-03-14 Data Limite: 2014-04-11 TC 27 SC CISPR/B CDV 60519-1:2014 CDV 11-f5:2014 Safety in installations for electroheating and Industrial, scientific and medical equipment - electromagnetic processing Part 1:General requirements Radio-frequency disturbance characteristics - Limits Data Limite: 2014-05-02 and methods of measurement - Fraction project f5: Supplement of CISPR 11 with emission requirements TC 27 for Grid Connected Power Converters (GCPC) CDV 62798:2013 Data Limite: 2014-04-11 Industrial electroheating equipment - Test methods for infrared emitters SC CISPR/I Data Limite: 2014-03-21 FDIS 35:2014 Electromagnetic compatibility of multimedia equipment TC 31 - Immunity Requirements CDV 60079-28:2013 Data Limite: 2014-03-07 Explosive atmospheres Part 28:Protection of equipment and transmission systems using optical radiation SC CISPR/I Data Limite: 2014-03-07 FDIS 35:2014 Electromagnetic compatibility of multimedia equipment TC 31 - Immunity Requirements FDIS 60079-29-3:2014 Data Limite: 2014-03-07 Explosive atmospheres Part 29-3:Gas detectors - Guidance on functional safety of fixed gas detection systems TC 2 Data Limite: 2014-03-14 IEC 60034-8:2007 /FDIS A1:2013 Rotating electrical machines Part 8:Terminal markings and TC 33 direction of rotation FDIS 60871-4:2014 Data Limite: 2014-02-21 Shunt capacitors for AC power systems having a rated voltage above 1 000 V TC 8 Part 4:Internal fuses CDV 62559-2:2014 Data Limite: 2014-03-14 Use case methodology Part 2:Definition of use case template, actor list and requirement list TC 44 Data Limite: 2014-04-11 CDV 62046:2013
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 91 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos Safety of machinery - Application of protective equipment IEC 60335-2-58:2002 /CDV A2:2014 to detect the presence of persons Household and similar electrical appliances - Safety Data Limite: 2014-03-14 Part 2-58:Particular requirements for commercial electric dishwashing machines TC 45 Data Limite: 2014-04-18 CDV 60412:2013 Nuclear instrumentation - Nomenclature (identification) of TC 61 scintillators and scintillation detectors and standard IEC 60335-2-65:2002 /CDV A2 dimensions of scintillators Household and similar electrical appliances - Safety Part Data Limite: 2014-03-14 2-65:Particular requirements for air cleaning appliances Data Limite: 2014-04-11 TC 46 CDV 62153-4-7:2014 TC 61 Metallic Communication Cable test methods Part CDV 60335-2-80:2014 4-7:Shielded screening attenuation test method for Household and similar electrical appliances - Safety Part measuring the transfer impedence ZT and the screening 2-80:Particular requirements for fans attenuation aS or the coupling attenuation aC of Data Limite: 2014-04-18 RF-Connectors and asemblies up to and above 3 GHz, Tube in tube method TC 61 Data Limite: 2014-04-11 CDV 60335-2-81:2014 Household and similar electrical appliances - Safety Part TC 49 2-81:Particular requirements for foot warmers and CDV 61338-1-5:2014 heating mats Waveguide type dielectric resonators Part 1-5:General Data Limite: 2014-04-11 information and test conditions - Measurement method of conductivity at interface between conductor layer and TC 61 dielectric substrate at microwave frequency IEC 60335-2-82:2002 /CDV A2:2014 Data Limite: 2014-04-18 Household and similar electrical appliances - Safety Part 2-82:Particular requirements for amusement TC 55 machines and personal service machines IEC 60851-2:2009 /CDV A1:2014 Data Limite: 2014-04-18 Winding wires - Test methods Part 2:Determination of dimensions TC 61 Data Limite: 2014-04-18 IEC 60335-2-95:2011 /CDV A1:2014 Household and similar electrical appliances - Safety Part TC 56 2-95:Particular requirements for drives for vertically FDIS 60300-1:2014 moving garage doors for residential use Dependability management Part 1:Guidance for Data Limite: 2014-04-11 management and application Data Limite: 2014-04-04 TC 61 IEC 60335-2-101:2002 /CDV A2:2014 TC 56 Household and similar electrical appliances - Safety Part CDV 62740:2014 2-101:Particular requirements for vaporizers Root Cause Analysis (RCA) Data Limite: 2014-04-18 Data Limite: 2014-05-09 TC 61 TC 56 CDV 60335-2-111:2014 CDV 62741:2014 Household and similar electrical appliances - Safety Part Guide to the demonstration of dependability requirements 2-111:Particular requirements for electric ondol mattress - The dependability case with a non-flexible heated part Data Limite: 2014-05-09 Data Limite: 2014-04-11
TC 57 TC 65 FDIS 62361-100:2014 CDV 62424:2013 Power systems management and associated information Representation of process control engineering - exchange - Interoperability in the long term Part Request in P&I diagrams and data exchange between 100:CIM profiles to XML schema mapping P&ID tools and PCE-CAE tools Data Limite: 2014-03-21 Data Limite: 2014-03-14
TC 61 TC 65 IEC 60335-2-27:2009 /CDV A2:2014 CDV 62443-2-4:2013 Household and similar electrical appliances - Safety Part Security for industrial automation and control systems - 2-27:Particular requirements for skin exposure to Network and system security Part 2-4:Requirements for ultraviolet and infrared radiation IACS solution suppliers Data Limite: 2014-04-11 Data Limite: 2014-03-21
TC 61 TC 72 IEC 60335-2-56:2002 /CDV A2:2014 CDV 60730-2-7:2013 Household and similar electrical appliances - Safety Part Automatic electrical controls for household and similar 2-56:Particular requirements for projectors and similar use Part 2-7:Particular requirements for timers and time appliances switches Data Limite: 2014-04-18 Data Limite: 2014-02-21
TC 61 TC 72
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 92 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos IEC 60730-2-8:2000 /CDV A2:2014 TC 88 Automatic electrical controls for household and similar CDV 61400-25-3:2014 use Part 2-8:Particular requirements for electrically Wind turbines Part 25-3:Communications for monitoring operated water valves, including mechanical and control of wind power plants - Information exchange requirements models Data Limite: 2014-04-04 Data Limite: 2014-05-02
TC 76 TC 88 FDIS 60825-1:2014 CDV 61400-27-1:2013 Safety of laser products Part 1:Equipment classification Wind turbines Part 27-1:Electrical simulation models - and requirements Wind turbines Data Limite: 2014-03-14 Data Limite: 2014-02-07
TC 79 TC 94 FDIS 62676-4:2014 CDV 62246-1:2013 Video surveillance systems for use in security Reed switches Part 1:Generic specification applications Par 4:Application guidelines Data Limite: 2014-03-07 Data Limite: 2014-03-14 TC 96 TC 79 FDIS 61558-2-10:2013 FDIS 62851-1:2014 Safety of transformers, reactors, power supply units and Alarm and electronic security systems - Social alarm combinations thereof Part 2-10:Particular requirements systems Part 1:System requirements and tests for separating transformers with high Data Limite: 2014-03-14 insulation level and separating transformers with output voltages exceeding 1000 V TC 79 Data Limite: 2014-02-21 FDIS 62851-2:2014 Alarm and electronic security systems - Social alarm TC 100 systems Part 2:Trigger devices FDIS 60728-1:2013 Data Limite: 2014-03-14 Cable networks for television signals, sound signals and interactive services Part 1:System performance of TC 79 forward paths FDIS 62851-3:2014 Data Limite: 2014-02-21 Alarm and electronic security systems - Social alarm systems Part 3:Local unit and controller TC 100 Data Limite: 2014-03-14 IEC 60728-7-1:2003 /CDV A1:2013 Cable networks for television signals, sound signals and TC 79 interactive services Part 7-1:Hybrid Fibre Coax Outside FDIS 62851-5:2014 Plant status monitoring - Physical (PHY) layer Alarm and electronic security systems - Social alarm specification systems Part 5:Interconnections and communications Data Limite: 2014-03-21 Data Limite: 2014-03-14 TC 100 TC 80 CDV 62087-1:2014 IEC 61162-3:2008 /CDV A2:2013 Audio, video, and related equipment - Determination of Maritime navigation and radiocommunication equipment power consumption Part 1:General (TA12) and systems - Digital interfaces Part 3:Serial data Data Limite: 2014-05-09 instrument network Data Limite: 2014-03-07 TC 100 CDV 62087-2:2014 TC 82 Audio, video, and related equipment - Determination of CDV 60904-2:2014 power consumption Part 2:Signals and media (TA12) Photovoltaic devices Part 2:Requirements for reference Data Limite: 2014-05-09 solar devices Data Limite: 2014-04-11 TC 100 CDV 62087-3:2014 TC 82 Audio, video, and related equipment - Determination of FDIS 60904-8:2014 power consumption Part 3:Television sets (TA12) Photovoltaic devices Part 8:Measurement of spectral Data Limite: 2014-05-09 responsivity of a photovoltaic (PV) device Data Limite: 2014-03-21 TC 100 CDV 62087-4:2014 TC 82 Audio, video, and related equipment - Determination CDV 62670-2:2014 of power consumption Part 4:Video recording Concentrator photovoltaic (CPV) performance testing equipment(TA12) Part 2:Energy measurement Data Limite: 2014-05-09 Data Limite: 2014-04-25 TC 100 TC 82 CDV 62087-5:2014 CDV 62759-1:2014 Audio, video, and related equipment - Determination of Transportation testing of photovoltaic (PV) modules power consumption Part 5:Set-top-boxes(STB) (TA12) Part 1:Transportation and shipping of PV module stacks Data Limite: 2014-05-09 Data Limite: 2014-04-11 TC 100
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 93 17 fevereiro 2014
DOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização normativos CDV 62087-6:2014 FDIS 62841-2-2:2014 Audio, video, and related equipment - Determination Electric motor-operated hand-held tools, transportable of power consumption Part 6:Audio Equipment (TA12) tools and lawn and garden machinery - Safety Part Data Limite: 2014-05-09 2-2:Particular requirements for hand-held screwdrivers and impact wrenches TC 104 Data Limite: 2014-03-14 CDV 60068-2-60:2014 Environmental testing Part 2-60:Tests - Test Ke: Flowing TC 116 mixed gas corrosion test FDIS 62841-2-4:2014 Data Limite: 2014-05-09 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety Part TC 110 2-4:Particular requirements for hand-held sanders and CDV 61747-1-1:2013 polishers other than disc type Liquid crystal display devices Part 1-1:Generic - Generic Data Limite: 2014-03-28 specification Data Limite: 2014-03-07 TC 116 FDIS 62841-2-5:2014 TC 110 Electric motor-operated hand-held tools, CDV 61747-1-2:2013 transportabletools and lawn and garden machinery - Liquid crystal display devices Part 1-2:Terminology and Safety Part 2-5:Particular requirements for hand-held letter symbols circular saws Data Limite: 2014-03-07 Data Limite: 2014-03-28
TC 110 TC 116 CDV 61747-2:2014 CDV 62841-2-9:2014 Liquid crystal display devices Part 2:Liquid crystal Electric Motor-Operated Hand-Held Tools, display modules - Sectional specification Transportable Tools and Lawn and Garden Machinery - Data Limite: 2014-04-25 Safety Part 2-9:Particular requirements for hand-held tappers and threaders TC 110 Data Limite: 2014-04-18 CDV 61747-2-2:2013 Liquid crystal display devices Part 2-2:Matrix colour TC 116 LCD modules - Blank detail specification FDIS 62841-3-1:2014 Data Limite: 2014-02-21 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part TC 110 3-1:Particular requirements for transportable table saws CDV 61747-3:2014 Data Limite: 2014-04-11 Liquid crystal display devices Part 3:Liquid crystal display (LCD) cells - Sectional specification TC 116 Data Limite: 2014-04-25 FDIS 62841-3-6:2014 Electric motor-operated hand-held tools, transportable TC 110 tools and lawn and garden machinery - Safety Part CDV 61747-10-2:2013 3-6:Particular requirements for transportable diamond Liquid crystal display devices Part 10-2:Environmental drills with liquid system and endurance measurements Data Limite: 2014-03-28 Data Limite: 2014-03-21
TC 110 CDV 61747-20-1:2013 Liquid crystal display devices Part 20-1:Visual inspection of monochrome liquid crystal display cells (Excluding all active matrix liquid crystal display cells) Data Limite: 2014-02-28
TC 110 FDIS 62679-1-1:2014 Electronic paper displays Part 1-1:Terminology Data Limite: 2014-04-11
TC 110 FDIS 62679-3-1:2014 Electronic paper displays Part 3-1:Optical measuring methods Data Limite: 2014-03-07
TC 111 CDV 62321-7-1:2013 Determination of certain substances in electrotechnical products Part 7-1:Presence of hexavalent chromium (Cr(VI)) in colorless and colored corrosion-protected coatings on metals by the colorimetric method Data Limite: 2014-03-21
TC 116
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 94 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
11. Projetos de normas da Organização Internacional de Normalização (ISO)/Comissão Eletrotécnica Internacional (IEC)
Os projetos de norma estão organizados por “Comité Técnico conjunto” ISO/IEC.
11.1 Projetos em inquérito público
Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários.
ISO/IEC TC CABPUB DIS 17021-1:2014 Conformity assessment - Requirements for bodies providing audit and certification of management systems Part 1:Requirements Data Limite: 2014-05-09
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 95 17 fevereiro 2014
Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização
12. Edição e anulação de outros Documentos Normativos
12.1 Documentos Normativos editados
Para cada referência, menciona-se a designação codificada (prefixos DNP TS, DNP TR, DNP Guia, DNP CEN/TS, DNP CEN/TS, DNP CEN Guia, DNP CEN/CLC Guia, DNP CLC/TS, DNP CLC/TR, DNP CLC Guia, DNP CEN/CLC, DNP ENV, DNP CWA, DNP ISO/TS, DNP ISO/TR, DNP ISO Guia, DNP ISO/IEC Guia, DNP IEC/TS, DNP IEC/TR, DNP ISO/PAS, DNP IWA e DNP IEC/PAS, número, parte e data), o preço, o título e a correspondência a documentos europeus e/ou internacionais, quando existam, o número do Termo de Aprovação e a respetiva data. Os Documentos Normativos referenciados entram em vigor no dia seguinte ao da edição desta Lista Mensal.
Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 96 17 fevereiro 2014