Packagingigus® solutions for the packaging industry ...

plastics for longer life®...

...industry...... www.igus-packaging.eu ... Most hygenic ...... in the packaging industry

Precise and fast processing, pure and safe. Reduce costs ... improve technology ... with igus®...

From Page dry-tech® bearing technology: e-chains® and chainflex® cables: ... in the beverage industry 8 Any elimination of Lubrications Reduce downtimes, increase service = no product contamination life of cables and hoses From Page Resistance against acids, alkalis Various types of motions and ... in the industry 10 and alcoholic cleaning agents installation types Food-friendly design Carry sensitive bus, data and fibre From Page Cleaning-friendly optic cables, as well as media ... in the general packaging industry 12 Excellent value stainless steel In different environments such as cold, in application heat, humidity, etc. From Page FDA- and/or EU-compatible Compact installation Practical applications 12 materials possible High accelerations, long travels Stability even at high temperatures Lightweight aluminium construction

From Page www.igus.eu/dry-tech www.igus.eu/the-chain No product contamination – iglidur® plastic bearing 34

Avoid lubricating From Page xiros® polymer ball bearing 40 iglidur® plain bearings

Reduce maintenance – From Page drylin® linear technology 44

Compensate easily – From Page e-chains® and igubal® spherical bearings 48 chainflex® cables

Holds permanently in e-chain® – From Page chainflex® cables 50

For all types of applications and installation From Page methods – e-chains® 52

drylin® linear technology

2 3 igus® solutions ...... for the packaging industry

Your team for the packaging industry (igus® Cologne): Jan Michels, Bastian Mehr, Lars Braun and Andrej Schmidt (from left)

motion plastics® from igus® in the packaging industry – free from Lubrications, maintenance-free, FDA and/or EU conformity.

Solutions in the packaging, food or beverages industry Also visit our industry website are mostly very sensitive. Particularly when in contact with food, special requirements must be met, while www.igus-packaging.eu cleanliness and economic feasibility is at the forefront within the packaging industry by means of accurate and Discover many other igus® benefits for your industry in this fast processing. brochure, on our website or in a personal conversation with us. Tuned to the specific needs of the packaging industry, such as food hygiene or FDA and/or EU compliance, We look forward to your call or E-mail. we are able to provide you with our maintenance- free and Lubrication-free elements made of Your team for the packaging industry. high-performance plastic solutions that optimise your packaging .

Cost down, service life up! 4 5 igus® in the packaging, beverages and food industry igus® solutions for the beverages industry

Filling technology Inspection technology Palletising technology Labelling technology Cam-guided carousel , lifting inspection, height level and Bottle gripper, size adjustment, ejectors, bottle guides, elements, filling valves, guides, volume control, sealing and bottle stacker labellers and cutting machines centring bell inspection Low weight = Reduction No product contamination Chemical resistance Complete solutions from one source in moving masses Lubrication-free Corrosion resistance Chemical resistance Freedom from Lubrications = Extreme wear resistance No damage of soft stainless no product contamination steel shafts Corrosion resistance

Cleaning technology Blow moulding machines Bottle and washers, rinsers Bottle ejector, PET bottle grippers Custom plain bearing available No product contamination High chemical resistance Reduction of moving mass Maintenance-free Reduced installation space needed igus® solutions for the food industry

Food industry, general Sausage, meat and Sweets processing Knife-edge applications Can openers, cutters, fish processing Adjustment conveyor belt, No lubrication to contaminate peeling machines Sausage filling machines, wafer baking machines the belt Low moisture absorption fillers, slicing machines No damage to soft stainless Low drive power Maintenance-free FDA compliant steel shafts Increased service life of the belt Low weight Corrosion resistance Temperature resistance Cost advantage Lubrication-free Chemical resistance Better wear values igus® solutions for the general packaging industry

Forming, filling and sealing machines Tray sealing Dosing systems Cartoning machine Guide unit, filling Sealing stations, tool changers, Multi-head weighers, Product feeder, format adjust- process, film welding unit toggle lever mounting damper bearing ment, stop Resistance against cleaning agents High wear resistance Vibration dampening Reduction of moving masses Lubrication-free Corrosion resistance High chemical resistance Lubrication-free No damage of soft stainless Use of soft shafts possible Corrosion resistance Corrosion resistance steel shafts

Tubular bag packing machines Pharma Packaging Weighing technology machines Sealing bar adjustment, Circle filler, dosing systems, Weighing and dosing heads, Position guide, format adjustment bag folder, sensor adjustment blister packaging multi-head weighing systems Resistance to dirt Wear resistance Lubrication-free Vibration dampening Maintenance-free dry operation Short and fast strokes possible Autoclaving possible Chemical resistance Corrosion resistance Finished complete solutions Corrosion resistance Use of soft shafts possible

6 7 Media-resistant ... Beverages industry Filling technology Inspection technology

Circle filler – lifting element Camera adjustment iglidur® J, drylin® JUM films or plain bearings made of drylin® SLW lead screw unit for the iglidur® H group in curve-guided lifting element for format adjustment of cameras. bottles. Ready to install solution saves time and money Maintenance-free Corrosion-free solutions possible No production contamination through Lubrications Low clearance lead screw unit due to adjustable Resistant to typical cleaners housing bearings (PES, hydrogen peroxide) High static forces possible Maintenance-free More information: iglidur® page 34-39, drylin® page 44-47 More information: drylin® page 44-47

Circle filler - control valve Camera adjustment iglidur® J piston ring for pivoting movement drylin® SLW-2080 lead screw unit for the and iglidur® plain bearings in the link rollers. XZ adjustment of the inspection camera

Easy installation Customer-specific solution Low cost Total solution saves time and money More wear resistant than conventional plastics Low clearance due to adjustable housing bearing Defined clearance High static loads possible

More information: More information: iglidur® page 34-39 drylin® page 44-47

Screw capper Format adjustment inspection head drylin® RJUM linear bearings for the curve-guided drylin® SHT-20 lead screw unit for XYZ adjustment linear movement. Complete solution from a single source Cleanable solution Cost savings Maintenance-free Torsional stiffness solution No production contamination through Lubrications Clearance-minimised system Resistant to the typical cleaners Maintenance-free (PES, hydrogen peroxide) Low adhesion, even with "blunt" shafts after cleaning More information: drylin® page 44-47 More information: drylin® page 44-47

8 9 No lubrication ... Beverages industry Palletisation / Transport / End of Line Labelling

Lane adjustment – bottle packer Transfer spider on transfer table Lubrication-free drylin® SLW-2080 for lane adjustment iglidur® J for mounting the main shaft for rotating the of the incoming bottles. transfer spider.

Ready to install series solution, saves time and money No elaborate, continuous lubricating system Adjust all six positions with a single drive point necessary as with previous solution (gunmetal bush) via linked systems. No lubrication required Corrosion-resistant solution possible Maintenance-free solution High torsional stability More information: More information: iglidur® page 34-39 drylin® page 44-47

Handle dispenser Label inspection iglidur® J and iglidur® W300 plain bearings and igubal® Maintenance-free drylin® SLW or SHT lead screw unit rod end bearings in a carrier handle dispenser. for the height adjustment of cameras or sensors.

Low coefficients of friction Ready to install solution saves time and money Resistant to typical cleaning agents Corrosion-free solutions possible (PES, hydrogen peroxide) Many customer-specific applications Low weight = Low moving mass "Clearance-free" solutions (fixed housing) Wear-resistant High static forces possible

More information: More information: iglidur® page 34-39, drylin® page 44-47 drylin® page 44-47

Knife-edge rollers Inline labelling machine iglidur® P210 knife edge roller for mounting the knife xiros® plastic ball bearings in film guide rollers edge in bottle transport. No washing required No Lubrication on the belt (compare needle bearing) Corrosion resistant Lower drive power and longer service life Lower coefficients of friction than as plain bearing of the belt than the gliding knife edge Chemically resistant solution Price advantage for the rotating part made of PETP Low cost compared to sealed ES ball bearing Higher wear resistance than PETP Cost advantage compared to needle bearing and PETP More information: iglidur® page 34-39, xiros® page 40-43 More information: drylin® page 44-47

10 11 Low friction ... Beverages industry Cleaning Packing machines / Multi-head weighers

Bottle cleaning – washing chain. Dosing of the unpackaged product. iglidur® RN plain bearing for mounting the iglidur® plain bearings or igubal® spherical bearings washing chain rollers. implement the pivoting movements of the flaps. Reduction of the driving force Longer service life Low noise, vibration dampening Resistant to sodium hydroxide solutions Maintenance-free Noise reduction of the machine No production contamination through Lubrications Resistant to the typical cleaning agents More information: Very low humidity absorption iglidur® page 34-39 More information: iglidur® page 34-39, igubal® page 48-49

Rinser – spray pipe guide. Sensor adjustment. ® ® iglidur J plain bearing for the pivoting motion, iglidur J- drylin® SLW-1040 for sensor adjustment. special plain bearing as inlay and iglidur® J double flange bushing for the spraying bearing. Adjustment from outside possible (no reaching into the machine Low friction against soft stainless steel shafts Installation between machines walls Longer running rates than UHMPE or "table-top solution" Wear-free solution - no water lubrication required Complete solution saves time and money

More information: More information: iglidur® page 34-39 drylin® page 44-47

Neck handling of PET bottles Sealing bar guide. drylin® R for the linear motion of the sealing bar iglidur® X, J, H370 or X6 plain bearings in the gripper and igubal® rod end bearings for the synchronous drive for PET blanks and PET bottles. of the sealing bar.

Pivoting motion More resistant than recirculating ball bearings: High forces due to edge load drylin® JUM for temperatures up to 60°C; High wear resistance drylin® XUM for temperatures > 60°C Soft stainless steel shafts possible More information: Chemical resistance iglidur® page 34-39 No shaft wear

More information: igubal® page 48-49, drylin® page 44-47 12 13 General packaging industry Foodstuffs ... FDA compliant Cartoning machine / Thermoforming machines Sweets processing

Format adjustment of carton stop. Wafer baking. Using synchronised drylin® SLW-2080 lead screw iglidur® X6 plain bearings are used in the hinge bolt and units, the format adjustment of the carton stop is the chain link bearing of a pair of wafer baking tongs. implemented. Pivoting movements possible at temperatures Ready to install complete system from one source of up to 200°C Cost and time savings No corrosion despite high air humidity Maintenance-free High wear resistance

More information: More information: drylin® page 44-47 iglidur® page 34-39

Product inserter. Knife-edge rollers. drylin® W linear guides. iglidur® P210 knife-edge rollers for mounting the knife edge in the bakery equipment. Reduction of moving mass No product contamination, Lubrication-free No Lubrication on the belt Lower drive power and longer service life More information: of the belt than the gliding knife edge drylin® page 44-47 Price advantage for the rotating part made of PETP Quiet operation Higher wear resistance than PETP Cost advantage compared to needle bearings and PETP

More information: Lifting stations. iglidur® page 34-39 drylin® R linear bearing for guiding the lifting columns and iglidur® Z plain bearing for the toggle lever move- ments.

Maintenance-free lifting stations, no lubrication No product contamination Can be washed down iglidur® Z can be used even at high

More information: iglidur® page 34-39, drylin® page 44-47

14 15 General packaging industry Practical examples Thermo-forming Tubular bag packing machines

Standardised toggle lever stroke system in the Adjustment of the long seal jaws using "drylin® W" sealing station (overall view): the vertical guide of linear guide including manual clamping for fast, the upper stroke is accomplished with iglidur® J simple and manual positioning. plain bearings, the togglelever bearing with the heavy duty material iglidur® Z. Format adjustment of the sensors for web edge detection and print mark detection through drylin® SLW lead screw unit Primary linear bearing support solution with position indicator and hand for the lower film tensioner wheel. using igubal® flange bearings

Main bearing of the sealing bar with Vibration-free energy and drylin® R linear liners in combination data guidance E6 e-chain® with hard anodised aluminium shafts on the inline labeller. for maximum running performance.

16 17 General packaging industry Practical examples Filling plants Disinfection machines

The drylin® W linear guide with housing bearings The xiros® polymer ball bearings are also used in a is made as a special part according to the series of packaging machines. They are sturdy, customer's drawing. smooth and often replace more expensive metallic roller bearings.

The filling systems are modular and easily adaptable to the most varied requirements. The compact drylin® linear unit in the installed state. igus® energy chains transmit energy and signals to the moving parts of the system.

Using a hand wheel, the operator can position the Concealed mounted drylin® W guide rail ensures Overall view of the disinfection machine. filling head weighing at least 80 kg without much smooth movements in the supply of for effort. the filling.

18 19 General packaging industry Practical examples Diaper packaging machine

drylin® SLW-2080 lead screw units provide the synchronised height adjustment for pressing the packed diapers into .

Format adjustment of the sensors for the web centre monitoring via drylin® lead screw unit easytube SET-25. The lead screw is reliably protected by the rugged aluminium tube.

Middle adustment of a four-web 90° deflection using drylin® lead screw unit SHT-12-AWM for non-woven webs. A total of eight systems are in use.

20 21 Beverages industry Practical examples Unscrewing and uncorking bottles Butterfly gripper – End of Line

Automatic plant for bottle emptying. The valves on this plant are equipped with cylindrical drylin® linear The butterfly gripper is a construction kit that is assembled from small modules depending on the grasping bearings. task. drylin® linear technology is a major component of this construction.

drylin® W linear guide systems are used in the neck Maintenance-free iglidur® X6 plain bearings are The grooves allow dirt to pass through the drylin® The linear plain bearings RJMP-01-25 are very sleeve removers. These are also maintenance-free used in the toggle lever systems that grab onto the linear plain bearing RJMP-01-25. robust. and resistant against cleaning agents used by the bottles. beverages industry.

22 23 Food industry Practical examples Wafer-baking machines High-speed stacking system in slicers

Adjustment and format adjustment of a prism beam in the stripping station of ice cream cones using Linear stroke of the pre-gripper for feeding the material to be cut. Thereby soft stainless steel shafts and drylin® easytube SET-25-AWM. linear films of the type series drylin® JUM-01-40 are used.

Position adjustment of the batter spray pipe with a Safety adjustment with maintenance-free drylin® Mounting of the holder of the material to be cut in Pivotal mounting of the feed arm with iglidur® X6 clearance-adjustable drylin® SLW-1040 lead screw WJRM hybrid bearings for the lowest adjustment tray and fork design. It is driven by a pneumatic plain bearings. unit. forces. cylinder for implementing the pivoting movement with iglidur® J plain bearings.

24 25 Beverages industry Practical examples Bottle washing/filling plants Beverages bottle filling

By the use of iglidur® plain bearings in washing chain rollers, the drive energy required for the bottle Cost effective: 90% cost saved, as Lubrication-free, affordable iglidur® plain bearings have a long life. washing machine could be significantly reduced.

A component for successful mechatronics – Mounting with high-temperature material iglidur® X in a filling valve for iglidur® X. beverages bottle filling.

26 27 Beverages industry Practical examples Beverages filling machines Bottle packing machine

Pneumatic lifting device for filling machines – iglidur® H370 gives you a low coefficient of friction in dry Bottle packing machine: The redevelopment of a gripper using igus® plain bearing elements resulted in a very operation, chemical resistance and low moisture absorption. thin, rugged and Lubrication-free gripper tool that is right now not available in the market.

No wear after 5 years: iglidur® polymer plain bearings and drylin® R liners in a beverages can emptying system.

igubal® spherical bearing in pneumatically driven flap bearing.

28 29 Foodstuffs Practical examples Packaging plants Bulk goods handling

Sought by Mr. Clean – The Bulk goods handling: pressing device Lubrication-free bearing system is with pull-off technique for pressing bulk highly recommended for the food goods in a packaging process. igus® and hygiene industry. polymer bearings and an igus® e-chain® were used in the construction.

Packaging line for profiles: With igubal® spherical bearings, flange bearings and rod end bearings, A major reason for the use of igus® polymer bearings is the freedom from Lubrication. In this pressing maintenance and downtime was reduced almost to zero. device numerous igubal® spherical bearings were installed.

30 31 e-chains®/chainflex® cables Practical examples All axes and clean room The smallest installation spaces and solutions from a single source

Carry energy, data and media – in any orientation – igus® e-chains® and chainflex® cables. Even for the narrowest installation space – bending radii from 4 x d with e-chains® and chainflex®.

drylin®, e-chains® and Cleanroom-suitable chainflex® cables – e-chains® – virtually no all parts from one source in abrasion, IPA Class 1. thermoforming machine.

32 33 iglidur ® plastic plain bearings ...... no product contamination

The iglidur® solution: FDA-/EU The self-lubricating effect. compliant* The high-performance polymers of the iglidur® plain bearings consist of:  The base polymers are crucial for the wear resistance.  Fibres and filling materials reinforce the bearing to absorb high forces or edge loads.  Finally, the solid Lubrications automatically lubricate the bearings and reduce the friction in the system.

Integrated lubrication. As microscopic particles, millions of the solid Lubrications are embedded in minute chambers in the solid, mostly fibre-reinforced material. The bearings release tiny amounts of Lubrications from these chambers. This is adequate to sufficiently lubricate the immediate surrounding area. The Lubrications help to reduce the iglidur® bearing's coefficient of friction.

Up to 250°C Wide-ranging design options, continuous use as injection-moulded or Predictable More than 8,500 (depending on machined parts, to your service life sizes from stock material) specifications

Tested! Lubrication and maintenance-free plain bearings In the largest lab of its kind, igus® Cologne made from high-performance plastics – iglidur®. Test: "swivel test" Results of the wear test on St52 / gas nitrified No lubrication or maintenance required, while cutting  Highly wear-resistant polymers, improved with fine- Objective: To test the wear of iglidur® Wear in μ/km; p= 30 MPa; v= 0.01 m/s; pivoting costs and increasing service life, everything from stock tuned additives of reinforcement materials and solid plastic plain bearings compared to metallic 300 and delivered promptly – that is the central idea of all Lubrications plain bearings 250 igus® products. iglidur® plastics have been extensively Tested by the thousands, proven by the millions Test setup: Swivel test on a shaft with tested with respect to wear and friction values Lubrication-free, maintenance-free, cost-effective, 200 30 MPa. including other relevant material properties. iglidur® predictable and versatile Result: All tested iglidur® materials show 150 polymer plain bearings from igus® signifies the step from Compliant to the EU regulation 10/2011 EC and/or considerably less wear than the metallic 100 the plastic bushing to the tested and therefore predictable FDA-compliant (FOOD AND DRUG ADMINISTRATION) plain bearings. The shafts of the metal plain machine element. For direct use in the vicinity of (or in contact with) 50 bearings exhibit significant wear and are

food or drugs [μm/km] rate Wear 0 therefore unsuited for further use. iglidur® Q iglidur® G iglidur® Z Brass with Met. rolled Short delivery times even for special dimensions. initial lubrication with gliding layer

www.iglidur.eu

*iglidur® A180, A350, A500 , A181, A160

34 35 iglidur ® materials ... High loads iglidur® Z iglidur® Q2 ... for the packaging industry Excellent wear resistance Lubrication and maintenance with high loads free Standards High thermal resistance Wear resistant and dimensio- For high surface speeds nally stable at high loads iglidur® G – iglidur® J – Good price/performance ratio the allrounder the Fast and Slow Maintenance-free dry operation Motion Specialist High temperatures High abrasion resistance Low wear against many iglidur® H370 iglidur® X Resistance to dust and dirt shaft materials Wear resistant; especially For operating temperatures of Over 700 sizes available Low friction coefficients under water -100°C to +250°C in continuous ex stock in dry operation High temperatureresistance operation Low-cost Vibration dampening (-40 to +200°C) Excellent chemical resistance Good resistance to chemicals High chemical resistance High compressive strength Best performance with iglidur® W300 – soft shafts the endurance runner Low moisture absorption iglidur® J350 For especially long service life Temperature-resistant Low coefficient of friction Wear-resistant Extremely high abrasion resistance Impact resistant Suitable for rough shafts and stainless steel shafts - dirt-resistant Specialists iglidur® X6 iglidur® P210 FDA- and/or EC-compliant Low-cost material for mass production Also suitable for soft shafts Low coefficients of friction iglidur® A160 iglidur® A500 Low wear Good media-resistance Compliant with EC Directive Resistant to temperature Low friction Low moisture absorption 10/2011 EC from -100°C to +250°C FDA-compliant Very high resistance iglidur® J4 iglidur® T220 Very high media-resistance to chemicals Low-cost material for mass production Free from undesirable Average temperature range Compliant with EC Directive Low coefficients of friction and prohibited contents Low-cost 10/2011 EC Good media-resistance in the tobacco industry FDA-compliant Low moisture absorption

iglidur® A181 iglidur® L250 iglidur® J3 iglidur® A350 Compliant with EC Directive Specially made for fast Low coefficients of friction Temperature resistant 10/2011 EC rotating applications Good media-resistance allrounder material FDA-compliant Very low coefficients of friction Low moisture absorption Compliant with EC Directive Good media-resistance Excellent wear resistance PTFE-free 10/2011 EC FDA-compliant Special solutions iglidur® A180 For wet environments Customer solutions FDA-compliant Individually adapted materials with special properties: We develop the plastic that's needed for your application and find the ideal solution.

36 37 More products ...... from the iglidur ® product range

iglidur® for free design. iglidur®-piston rings minimise efforts. Bar stock made of technical plastic. Compliance with EC Directive Replace elaborately stamped PTFE tapes with a Defined clearance As plastic bar stock to make your own or as mechanically 10/2011 EC possible single clip-on guide ring, such as in lifting elements, Piston rings in desired material and finished special components - for prototypes, test FDA-compliance possible control valves and fittings. We offer iglidur® piston rings dimension based on the iglidur® materials specimens and small quantity needs. Many materials Very high media-resistance made of freely selectable materials for a wide range of Lubrication and maintenance free available, including: iglidur® A180 that meets the Lubrication and maintenance free applications, for instance, made of the FDA-compliant Low installation effort requirements of the FOOD AND DRUG ADMINISTRATION Low-cost material iglidur® A180. More wear-resistant than PTFE tapes (FDA) for direct use (or contact) in environments with Wear-resistant Low-cost foodstuffs. High load capacity www.igus.eu/barstock

www.igus.eu/pistonrings

iglidur® knife-edge rollers. iglidur® off the reel: Tribo-Tape Materials: iglidur® A160, V400 Precise and Lubrication-free. "Sharp" deflection of conveyor belts The igus® Tribo-Tape is suitable for a variety of lining for Lubrication and maintenance free igus® has developed its own knife-edge rollers to Small radii ensure maximised space utilisation tribologically stressed surfaces and shapes. Thus, by Easy to cut implement conveyor belt deflection for conveyor To transfer difficult to handle transport goods bonding with laminated tape, for example, the dampening Can be glued technology applications. The first standard product range Insert for rolling knife edge properties are increased in applications with shocks and Wear-resistant has three iglidur® materials available: the universal iglidur® Usually high PV values (belt pretension / high vibrations. The tape made of, for example, iglidur® A160 Less installation space required P210 and the FDA compliant iglidur® A180 (up to 90°C) peripheral speed with small radii) is characterised by low friction coefficients and high wear and iglidur® A350 (up to 180°C). The iglidur® solution is Typical values: vmax = 0.3 to 0.5 m/s ; resistance, and complies with EU Regulation 10/2011 EC www.igus.eu/tribotape characterised by tight deflection radii and low, required pmax = 0.5 to 1 MPa and FDA requirements. driving power. www.igus.eu/knifeedgerollers

38 39 xiros® polymer ball bearings ...... avoid lubricating

xiros® polymer ball bearings revolutionise the ball bearing Lubrication and maintenance free market. Where conventional metallic ball bearings are High corrosion resistance FDA compliant not expedient, many applications can be successfully For temperatures up to +150°C implemented by their maintenance-free dry operation and High media resistance, washable, non-magnetic Predictable the use of xirodur® high-performance polymers. Low weight service life Many other designs www.igus.eu/xiros

Dry running, washable

Service life calculation Balls made Up to 150°C for xiros® polymer ball bearings of or continuous Select the installation size and enter the rotary speed stainless steel working and loads of your application. The material combinations temperature available in your required size are displayed in the "Select material combinations" window. There you can select the option for which you want to calculate the service life in dry operation.

www.igus.eu/xiros-expert

Lubrication and maintenance-free ball bearings made from high-performance plastics – xiros®.

xirodur® A500 – xirodur® B180 – xirodur® C160 – xirodur® M180 – xirodur® F180 – Heat, chemicals, electrical for the food sector. Washable, Media resistance. Resistant to Detectable and ESD protection and FDA insulation, wear-resistant. temperature up to 80°C. corrosion and chemicals. media-resistant. compliant in one.

www.igus.eu/xirosA500 www.igus.eu/xirosB180 www.igus.eu/xirosC160 www.igus.eu/xirosM180 www.igus.eu/xirosF180

40 41 Special parts and more ...... dry-tech® solutions

Ready made or custom made. Everything is possible – iglidur® special parts and solutions. Constructive special solutions such as double flanged bushings, piston rings, washable bearings, 2-component rollers, virtually everything is possible. iglidur® offers self-lubricating and maintenance-free plain bearing solutions absolutely according to your wishes, "off the shelf" or specifically "tailored" to your applications:

For you, "ready made" means ... For you, "custom made" means ... Selection from over 7,381 "Custom made" problem solutions for your application standard dimensions Washable design Quick availability Double flange bushings Low-cost Spherical knife-edge rollers

www.igus.eu/specialparts

xiros® system solution aluminum tubes with xirodur® B180 flanged ball bearings. The complete solution combines lightweight, anodised aluminum tubes with maintenance-free and cost-effective flanged ball bearings from xirodur® B180.

Low coefficient of friction Low-cost Maintenance-free Various diameters possible

www.igus.eu/xirosAlu

Dimensional example [mm]

3 3

2 2

1 1

d d

d d

d d

Ø Ø

Ø Ø Ø Inner Ø Outer Ø Flange Ø Length Ø d1 d2 d3 b1 10 38 38 500

b1 b1

Part No. structure BBT-AC38-6000-B180-10-ES-500

42 43 drylin® linear technology ...... Gliding instead of rolling

Clean as no Low noise operation Smooth operation through Lubrications through sliding motion sliding elements of required iglidur® J/J200 Maintenance-free due to integrated Lubrications

Corrosion- resistant due to coated surfaces Roller bearings – Point contact. drylin® plain bearings – Resistant to dirt, dust and or aluminium or surface contact. moisture - by Lubrication-free stainless steel Insert and dirt channels.

Profiles available in various geometries, installation sizes and clearances Tested! In the largest lab of its kind, igus® Cologne Lubrication and maintenance-free ® linear technology solutions – drylin®. Media test drylin linear technology. Service life and wear test of a drylin® linear guide in the "under-water basin".

drylin® is a product range of Lubrication-free linear plain Resistant to dirt due to dry operation bearings based on the principle of sliding instead of rolling. Insensitive to impacts and vibrations Tribo-optimised iglidur® high-performance polymers are High static load capacity used as sliding surfaces. The drylin® linear systems Suited for short-stroke applications traverse in dry operation and are maintenance-free. High speeds possible up to 10 m/s and Available are linear guides on rails or round shaft base. accelerations up to 100 G drylin® drive technology can supply ready-to-connect Low magnetism systems with lead screw drives or toothed belt drives, with or without motor. The focus is on, besides the freedom www.igus.eu/drylin from maintenance and lubrication, the ruggedness and insensitivity to influences such as dirt, water, chemicals, heat or impacts.

44 45 drylin® product overview Linear drive systems

drylin® T rail guides dryspin® technology and

Specially made for applications in the drylin® SD lead screws automation and handling sectors Maintenance-free dry operation Free of Lubrication and corrosion Low noise Adjustable bearing clearance Resistance to dust and dirt High static load capacity Corrosion-free Trapezoidal thread and high helix thread www.igus.eu/drylinT High levels of efficiency Anti-backlash function available

drylin® N flat guides www.igus.eu/dryspin

Low installation height and drylin® SHT/SLW linearmodule installation surface High speed and acceleration possible 100% Lubrication-free through polymer Numerous carriage options – bearings and nuts also with pretension For format adjustments Trapezoidal or high helix thread pitches www.igus.eu/drylinN Lightweight plastic units up to solid stainless steel solutions Freely selectable stroke length drylin® W profile guides Drive optional via hand wheel or motors Numerous accessories Easy installation Lubrication-free application www.igus.eu/drylinSHT 14 different profiles, over 50 carriage options Versatile use, space-saving and compact drylin® E drive technology www.igus.eu/drylinW Construction kit: Linear axis plus motor, ready to install, can be configured online Ready to install with motor drylin® R shaft guides Cable and limit switches available in Corrosion-free, wear-resistant 3-4 days Low friction coefficient and low noise operation Dimension identical to standard www.igus.eu/drylinE commercial ball linings Shafts, shaft support blocks and accessories available from stock Replaceable liners

www.igus.eu/drylinR

46 47 igubal® spherical bearings ...... Compensate easily

Rod end bearings with outer/inner thread; right/left, also as HT version for up to +200°C. Lubrication and maintenance-free

Vibration dampening Angle and axial joints, fitting screws Magnetically detectable Compensation of (optional) misalignments

Clevis joints and spring loaded pins, individual or combined (also with rod end bearings). Chemical resistance

Various types of pillow block bearings, with split housing and/or spherical ball (optional).

Lubrication and maintenance free spherical bearings Flange bearing with 2 or 4 bore holes, also as an HT version for up to +200°C. from igus® – igubal®.

igubal® is a system of self-aligning bearing elements and have excellent vibration dampening properties. They completely made of plastic. are insensitive to dirt, can operate in liquids and even in chemicals and are completely resistant to corrosion. Spherical bearings and self-aligning clip bearings. The igubal® series provides developers with a complete system of self-adjusting bearing elements: rod end igubal® maintenance-free spherical bearings with bearings, clevis joints, flange bearings, spherical bearings a diameter of 2 to 50 mm and pillow block bearings. Self-adjusting bearings are Resistant to chemicals and corrosion easy to install, adaptable to all angular variations and Excellent damping properties Spherical balls made from iglidur® materials. have already been used to replace special housings in High frequency possible many cases. Predictable service life

igubal® utilises all the advantages of the high performance www.igus.eu/igubal plastics employed. They can be used in dry operation Double spherical bearings and coupling bars.

48 49 chainflex® cables ...... last in e-chains® 1,244 cables available PVC, PUR, from stock TPE outer jacket Flexible cables used in energy chains need special Temperatures -40°C to +90°C depending on application design and manufacture to last through many cycles, For highly dynamic applications in energy chains high speeds and accelerations, as well as demanding Special design prevents cable failure environmental conditions. Electromagnetic compatibility and "corkscrewing" and compliance with standards and guidelines such Over 1,040 types off the shelf as UL, CSA, VDE, Inter- and Profibus are also taken Highly abrasion-resistant jacket materials for granted today. The igus® chainflex® product range (PVC, PUR, TPE) Highly flexible extends from energy chain compatible control cables, and durable Guarantee servo cables, motor cables, as well as robot cables to www.chainflex.eu Hydrolysis and bus cables, data cables, encoder cables and fibre optic microbe-resistant cables.

Cold flexible down month guarantee to -40°C

UV-resistant Tested! In the largest lab of its kind, igus® Cologne

Cables for constantly flexing movements and long service life in energy chains® – chainflex®.

e.g. chainflex® CF130.UL/140.UL – PVC control cable for medium loads. Cost effective, flame-retardant, temperatures -5°C to +70°C. www.igus.eu/CF140

e.g. chainflex® CF38 – TPE motor cable for extreme requirements in outdoor applications, UV-resistant, -40°C to +90°C. www.igus.eu/CF38

Cold test -40°C Objective: To determine the maximum service life of igus® chainflex® TPE cables e.g. chainflex® CF98 / CF99 – for heavy duty use and especially for small radii. TPE- outer jacket, at temperatures of -40°C. PVC- and halogen-free, cold-flexible, resistant to hydrolysis and microbes. www.igus.eu/CF99 Test setup: An igus® CF35 TPE cable was moved in an e-chain® in the igus® climate container at a travel of 7 m and a speed of 1.5 m/s at -40°C. Result: The test was ended after 3.7 million double strokes. The cable exhibits e.g. chainflex® CF THERMO – PUR thermocouple cable for high load requirements, little wear and is fully functional. PVC and halogen-free, resistant to hydrolysis and microbes. www.igus.eu/CFThermo

50 51 e-chains® for any application ...... and installation methods

Gliding surfaces Easy to assemble Dirt repellent ESD/Atex igus® e-chains® and e-chainsystems® are for long service life pin and bore outer contour version available suitable for universal applications II 2 GD Carry sensitive bus, data and fibre optic cables, as well as energy forms such as electricity, gas, air and liquids in one system Many types of orientation and application For high dynamic loads and tough service life requirements For all environments and climates (from -40°C to +120°C) Easy to clean Compact installation Also as detectable material or as ESD/ATEX version Very quiet Cross bars snap Magnetically Enclosed or open construction types operation due to open on both Smooth, detectable Simple modular assembly on site, as well as quick structural stop sides for quick cable-friendly material (on Strong stop dogs retrofitting of cables brake filling interior request) for high strength

www.igus.eu/e-chains A system for carrying energy, data and media – e-chains®.

Tested! In the largest lab of its kind, igus® Cologne

Over 5,000 tests for e-chains® in the largest lab of its kind, igus® Cologne. On a floor area of 2,750 The small, strong The versatile one – The Allrounder – m² igus® tests the durability of e-chains® and cables, always suitable for the application and place of allrounder chain – System E2/000 System E4.1 use. E2 micro system The E2/000 system combines The E4.1 system is the best Small e-chain® with rugged stop easy and versatile assembly igus® e-chain® in our product dog system and large pin/bore and installation with ruggedness range. With the igus® E4.1 for up to 25% longer unsupported – high strength combined with system, the service life of your length and 100% higher additional low-noise operation, long service application can be extended loads (compared to identical life for cables and many mounting even further and costs are further igus® types). A built-in "brake" options. The design features are lowered. E4.1 is easy to open, minimises impact noise and very uniform in all E2/000 models. quiet in operation and versatile in smooth contours ensure optimum Mechanical engineers all over use. Whether standing, hanging, cable protection. A chain opener the world rely upon this range. circular on short or long travels, at (included) saves significant time high speeds or harsh environment. when opening the e-chain®. E4.1 is often the first choice.

www.igus.eu/E2micro www.igus.eu/E2000 www.igus.eu/E4.1

52 53 www.igus-packaging.eu Find and calculate faster

For all tasks - for all batch sizes

Different industries need different solutions. Whether in mechanical engineering, automotive manufac- turering or in the robot industry – igus® offers customised support for specialised applications.

igus® already has many years of experience and specialised resources for many industries.

www.igus.eu/iglidurfinder www.igus.eu/industry

The iglidur® product finder shows you the right plain be- aring solution for your application with just a few clicks. With a direct link to the online catalogue with much more information and direct price display.

A wide range of other online tools, such as configura- tors, service life calculators, and product finders, can be found at www.igus.eu/online

www.igus-packaging.eu

Visit our industry website for more information, products and application examples as well as online tools.

54 55 Research & Development 15,000 tests per year

Better for the environment

Because iglidur® is free of Lubrications, no contaminants are discharged to the environment. The low weight of iglidur® polymer plain bearings also help make them environmen- tally attractive.

The igus® quality assurance The quality policy of igus® is to identify and meet customer needs, and to always be a competent and reliable supplier. igus® has always been com- mitted to produce products at the best availa- ble quality level, and to consistently develop innovative solutions.

Better products for less - a key element is the industry's largest test lab. 2,750 m2 lab, more than 15,000 tests and 2 billion test strokes per year. RoHS

The igus® lab and field experience

Cutting costs while also guaranteeing maximum pro- cess reliability – only those who conduct intensive research and testing will successfully bridge this gap. The industry's largest test lab conducts more than two billion test cycles per year on a total of 107 test rigs.

This means they can be relied upon completely in the field. Tribology testing in the plain bearing lab, www.igus.eu/test igus® Cologne. Extensive test database What is probably the world's largest database was created from more than 15,000 test. This database gives us the ability to select the right product for your specific application.

56 57 igus® Services

Harnessed energy supply systems with cables and connectors. igus® delivery service - fast & reliable.

readychain® readycable® From 24 hrs or same day* Fully harnessed systems in 3-10 days, 1,600 sys- igus® provides more than 4,000 harnessed cables All catalogue parts and individual components tems per week in 12 readychain® factories world- for drive technology according to 24 different for instance: one e-chain® link, 6 metre e-chain®, wide – optimised assembly time and better cash manufacturer standards. Professionally produced, 3 strain reliefs, one iglidur® Q2 plain bearing, one motion plastics® flow. 100% tested. drylin® linear plain bearing Eliminate storage costs for cables, e-chains® and Servo, power and signal-/encoder cables For over 50 years, we have been connectors No cutting charges, no surcharges for small 24 - 48 hrs* driven by a single vision – motion Cut turnaround times by half quantities and packaging Customised systems plastics®: Innovations from plastics Flexibility for order fluctuation Cable length accurate to the centimetre per for instance: 11.46 m e-chain® with interior that move machinery. Reduce the number of suppliers and orders by 75% customer spec separation, guide rails, mounting brackets; 2.46 m Minimise your machine downtime Smallest bending radius from 7.5 x d drylin® profile rail with 2 carriages Our core technology are tribo- System guarantee - according to application Reduce storage costs and increase cashflow polymers - high-performance plastics, From stock in 24-48 hrs 3-5 business days that we engineer for optimised friction Harnessed systems and wear. This technology makes us www.igus.eu/readychain www.igus.eu/readycable for instance: simple, harnessed e-chainsystems® a world-leader in the development with cables without connectors; lead screw unit and manufacturing of energy supply based on specific requirements systems and plain bearings.

The igus® installation service 10 business days Complex systems and machined components Ensure prefessional installation, avoid downtimes and for instance: harnessed e-chainsystem® with cables additional costs - with the igus® e-chainsystem® ins- of all types and connectors, interfaces, fittings, tallation service machined shafts to drawing, or mechanically Products and services from a single source – with shortened plain bearings, or tool-based injection- low logistics costs for you moulded parts igus® system guarantee, customised for each application

www.igus.eu/assemblyservice * Products leave our facility within the indicated time. The indicated delivery time means time until shipping of goods.

58 59 ® igus® Brazil igus® Italy igus® India igus Santo Amaro Robbiate (Lecco) Bangalore

Márcio Marques Matteo Zaniboni Abhay Madanlal Kothari specialists ... Phone: +55-11 35 31-44 57 Phone: +39-039 59 06 1 Phone: +91-93 25 94 00 99 ... for the packaging industry – Fax +55-11 35 31-44 88 Mobile: +39-335 75 70 517 Fax: +91-80-45 12 78 02 E-mail: [email protected] Fax: +39-039 59 06 222 E-mail: [email protected] close to you worldwide. E-mail: [email protected]

igus® Germany igus® China igus® Japan igus® Korea Cologne (Headquarters) Shanghai Tokyo Incheon City Head of Industry Management

Ahren Xia Seita Abe Sean Kim Lars Braun Phone: +86-21-51 30 31 46 Phone: +81-3 (5819) 2030 Phone: +82 32 821 29 11 Phone: +49 2203 9649-218 Fax: +86-21-51 30 32 38 Fax: +81-3-(5819) 2055 Fax: +82 32 821 29 13 Fax: +49 2203 9698-218 E-mail: [email protected] E-mail: [email protected] E-mail: [email protected] Mobile: +49 172 2561826 E-mail: [email protected]

igus® Germany igus® Austria igus® Asean (ID, MY, SG, TH, VN) igus® Mexico Cologne (Headquarters) Ampflwang Singapore Toluca Industry Manager Christoph Föttinger Ryan Ong Francisco Marquez Jan Michels Phone: +43-76 75-40 05-17 Phone: +65 6487 1411 Phone: +52-1-72 22 64 39 23 Phone: +49 2203 9649-775 Fax: +43-76 75-32 03 Fax: +65-6487 1511 Fax: +52-728284-3187 Fax: +49 2203 9698-775 E-mail: [email protected] Mobile: +65 9642 2939 E-mail: [email protected] Mobile: +49 173 5415565 E-mail: [email protected] E-Mail: [email protected]

igus® Germany igus® Canada igus® Spain igus® Switzerland Cologne (Headquarters) Concord, ON Barcelona Neuendorf Industry Manager Kevin Wright Shadi Lara Rojas Lutz Alof Bastian Mehr Phone: 001-905-760-8448 Phone: +34 936 473 973 Phone: +41-76-380 97 15 Phone: +49 2203 9649-140 Mobile: 001-416-570-1411 Fax: +34 936 473 951 Fax: +41-62-388 97 99 Fax: +49 2203 9649-334 Fax: 001-905-760-8688 Mob.: +34 678 669 064 E-mail: [email protected] Mobile: +49 172 4008998 E-mail: [email protected] E-mail: [email protected] E-mail: [email protected]

igus® Germany igus® France igus® Taiwan igus® UK Cologne (Headquarters) Fresnes (Paris) Taiwan Northampton Industry Manager Julien Villard Sean Hsiao Chris Foot Andrej Schmidt Phone: +33.1.49.84.98.16 Phone: +886-4-2358-1000 Phone: +44-16 04-67 72 40 Phone: +49 2203 9649-7734 Fax: +33.1.49.84.03.94 Fax: +886-4-2358-1100 Fax: +44-16 04-67 72 45 Fax: +49 2203 9649-334 Mobile: +33.6.42.15.80.72 E-mail: [email protected] E-mail: [email protected] E-mail: [email protected] E-mail: [email protected]

60 61 igus® worldwide igus® offices 10 Canada 19 Egypt 28 Iran 39 Morocco igus® Office Canada IEE International Company Tamin Ehtiajat Fanni Tehran AFIT igus® distributors 201 Millway Ave. for Electrical Engineering (TAF CO.) 5, Rue Amir Abdelkader 44 59 21 UNIT 25 2nd floor, 25 Orabi St No. 36, West 4th St. , Et- 20300 Casablanca 20 1 Germany Concord Down Town, Cairo tehad Ave. Damavand Rd. Phone +212 522 633769 Ontario L4K 5K8 Phone +202 25767370 Tehran - 1658674583, Iran Fax +212 522 618351 34 ® igus GmbH Phone +1 905 7608448 Fax +202 25767375 Phone +98-21-7712 0809 [email protected] 10 29 67 17 47 36 5 50 Spicher Str. 1a Fax +1 905 7608688 [email protected] Fax +98-21-7679 0430 42 16 54 51147 Köln [email protected] [email protected] 40 Mexico P.O. Box 90 61 23 70 6 1 55 25 68 20 Estonia ® 51127 Köln igus México S. de R.L. de C.V. 58 22 60 4 15 52 49 11 Chile ® 29 Ireland Phone 02203 9649-0 igus OÜ Boulevad Aeropuerto Miguel 48 7 37 9 9 57 32 Fax 02203 9649-2 22 Vendortec Lõõtsa 4A igus® Ireland Alemán 160 Int. 135 65 28 [email protected], www.igus.de San Martín # 2097 Tallinn 11415 Caswell Rd Col. Corredor Industrial Toluca Lerma 31 23 Maipú – Santiago Phone +372 667 5600 Northampton NN4 7PW Lerma, Estado de México C.P. 52004 64 35 61 2 Argentina Phone +56 2 7105825 Fax +372 667 5601 Phone +44-1604 677240 Phone +52 728284 3185 39 19 30 33 12 [email protected] [email protected] Fax +44-1604 677242 Fax +52 728284 3187 51 24 62 Borintech SRL [email protected] [email protected] 40 66 41 Av. Elcano 4971 12 C1427CIH Buenos Aires China 21 Finland 14 2 6 63 72 ® 30 Israel 41 Myanmar Phone +5411 4556 1000 igus Shanghai Co., Ltd. SKS Mekaniikka Oy 71 38 46 Fax +5411 4556 1000 No.46 Warehouse, Martinkyläntie 50 Conlog LTD Sea Lion Co. Ltd. 13 53 [email protected] 11 Debao Road, WGQ FTZ, 01720 Vantaa P.O. Box 3265 181 Bo Myat Tun St 49 Romania 18 2 7 Shanghai 200131, Phone +358 20 7646522 17 Hamefalssim Str. Botataung TechCon Industry SRL 45 3 Australia P. R. China Fax +358 20 7646824 Industrial Zone Kiryat Arie Yangon 11161 Myanmar Calea Crangasi nr. 60 Phone +86 21 51303100 [email protected] Petach-Tikva 49130 Phone +95 (0)1 29 97 97 060346 Bucuresti 8 Treotham Automation Pty. Ltd. Fax +86 21 51303200 Phone +972 3 9269595 Fax +95 (0)1 20 27 51 Phone +40 21 2219-640 14 Sydenham Road [email protected] Fax +972 3 9233367 [email protected] 22 France Fax +40 21 2219-766 11 69 Brookvale NSW 2100 [email protected] [email protected] ® 56 3 43 Phone +61 2 9907-17 88 13 igus SARL 42 Netherlands 2 Fax +61 2 9907-1778 Colombia 49, avenue des Pépinières [email protected] Colsein Ltda Parc Médicis 31 Italy igus® B.V. 49 Romania Parque Industrial Gran 94260 Fresnes igus® S.r.l. Sterrenbergweg 9 Hennlich SRL 4 Austria Sabana Edificio / Building 32 Phone +33 1 49840404 Via delle Rovedine, 4 3769 BS Soesterberg Str. Patria, Nr17 Tocancipá, CUN 251017 Fax +33 1 49840394 23899 Robbiate (LC) Phone +31 346 353932 ® 310106 Arad igus polymer Phone +57-1-519-0967 [email protected] Phone +39 039 5906.1 Fax +31 346 353849 Phone +40 257 211119 Innovationen GmbH [email protected] Fax +39 039 5906.222 [email protected] Fax +40 257 211021 Ort 55 55 Slovenia 60 Switzerland 66 United Arab 70 USA 23 Greece [email protected] [email protected] 4843 Ampflwang Hennlich, d. o. o. igus® Schweiz GmbH Emirates igus® inc. Phone +43 7675 4005-0 14 Costa Rica Chrismotor s.a. 42 Netherlands - 32 Japan Plain bearing Industrijska tehnika Winkelstr. 5 Unigroup (FZE) 257 Ferris Avenue Fax +43 7675 3203 Enesa Equipos 71, Sp. Patsi str. 50 Russia Podnart 33 4622 Egerkingen P.O. Box 14349 ® 1st floor Rasana [email protected] Neumaticos S.A. 118 55 Athens igus k.k. Elcee Holland BV OOO Hennlich SI-4244 Podnart Phone +41 62 3889797 Building M602 East Providence Del Colegio Marista Phone +30 210 34 25574 Arcacentral 15F, 1-2-1 Kinshi, Kamerlingh Onnesweg 28 Ozernaja 16 Phone +386 4 53206-10 Fax +41 62 3889799 Sharjah Intern. Airport Freezone RI 02914 5 Belarus 100 este, 200 sur, 25 este Fax +30 210 3425595 Sumida-ku Tokyo JAPAN NL-3316 GL Dordrecht building 1, office 4 Fax +386 4 53206- 20 [email protected] P.O. Box 120300 Phone +1 401 4382200 Urbanizacion Ciruelas [email protected] Zip 130-0013 Phone +31 78 6544777 170008 Tver [email protected] Sharjah - UAE Fax +1 401 4387270 SOOO Hennlich Alajuela, Costa Rica Phone +81 358 192030 Fax +31 78 6544733 Phone +7 4822 787 180 Phone +971 6 5578386 [email protected] Kharkovskaya Str. 90-8 Fax +81 358 192055 [email protected] 61 Syria Phone +506 2440-2393 23 Greece Fax +7 4822 630 180 56 South Africa Fax +971 6 5578387 Minsk, 220015 Fax +506 2440-2393 [email protected] [email protected] ETTA Systems [email protected] Phone +375 17 207-1828 [email protected] J. & E. Papadopoulos S.A. igus® Pty. Ltd. Al-Hamra St. Shalan Building 71 Venezuela Fax +375 17 207-3921 12 Polidefkous str 43 New Zealand 33 Jordan Unit 29 12850 Damascus Neumatica Rotonda C.A. [email protected] Piraeus, 185 40 Automation Equipment Ltd. 51 Saudi Arabia Midline Business Park Phone +96 311 332 5519 66 United Arab 15 Croatia Emirates Prolong Av. Michelena Phone +30 210 4113133 Al Hezam Adtech 26 Tawn Place AFI Cnr Le Roux & Richards Drive Fax +96 311 334 2639 C.C. Atlas Locales B-10 y 6 Belgium/Luxembourg Hennlich, Industrijska Fax +30 210 4116781 Abu Alanda Street ,Building No. 1 PO Box 5656 Khalaf Bin Hesham Street Midrand 1682 [email protected] Power & Technology Trading B-11 d. o. o. [email protected] Amman Hamilton ® Box 9998 Phone +27 11312-1848 Co. L.L.C Valencia, Edo. Carabobo igus B.V.B.A. Stupničkoobreška 17 Phone +962 64 170100 Phone +64 7 8490281 31423 Dammam Fax +27 11312-1594 Jagersdreef 4A 62 Taiwan Salehi Building, Shop No. 1 Phone +58 241 832.64.64 Stupnički Obrež 24 Hong Kong Fax +962 64 169993 Fax +64 7 8492422 Phone +966 38740033 [email protected] First Industrial St. +58 241 832.32.50 2900 Schoten ® 10255 Gornji Stupnik [email protected] [email protected] Fax +966 38470077 igus Taiwan Company Ltd. Industrial Area 2. +58 241 838.88.19 Phone +32 3 330 13 60 Phone +385 1 3 874334 Sky Top Enterprises Ltd. [email protected] 5F, No. 35, 24th Road Fax +32 3 313 79 71 Room 1806 ; Block C; Wah 57 South Korea P.O. Box 33372 SHJ Fax +58 241 832.62.83 Fax +385 1 3 874336 34 Latvia 44 Norway Taichung Industrial Park Sharjah - UAE [email protected] [email protected] [email protected] Tat Industrial Center; Wah Sing igus® Korea Co. Ltd. Taichung 40850 Street; Kwai Chung Hong Kong igus® OÜ 52 Serbia + Montenegro Phone +971 6 5421300 ASI Automatikk AS 613-14 Namchondong, Phone +886 4 2358-1000 Fax +971 6 5423700 Phone +852 23318928 Lõõtsa 4A Ingv. Ludvigsensgate 23 Namdonggu Fax +886 4 2358-1100 72 Vietnam 7 Bosnia + Herzegovina 16 Czech Republic Hennlich doo Beograd [email protected] Fax +852 24269738 Tallinn 11415 3007 Drammen Radomira Markovica 1/3 Incheon City, 405-846 [email protected] ® Hennlich d.o.o. igus Singapore Pte Ltd HENNLICH s.r.o. [email protected] Phone +372 667 5600 Phone +47 9006 1100 11222 Beograd / Srbija Phone +82 32 82129-11 The Representative Office in HCMC Dzemala Bijedica 185 Českolipská 9 Fax +372 667 5601 [email protected] Phone +381 11 63 098 17 Fax +82 32 82129-13 67 United Kingdom Avaz Business Centar 63 Thailand An Khanh Plaza, 3A Floor 412 01 Litoměřice 25 Hungary [email protected] Fax +381 11 63 098 20 [email protected] igus® 63 Pham Ngoc Thach Street 71000 Sarajevo ® igus® Thailand Co., Ltd Tel. e-chains ® 45 Peru [email protected] Caswell Rd Ward 6, District 3, Phone +387 33 45 14 39 +420 416 7113 32 igus Hungária Kft. 10 Floor, Unit C1 Fax +387 33 45 14 39 Ipari Park u.10. 35 Lebanon 58 Spain Northampton NN4 7PW Ho Chi Minh City, Vietnam Tel. Plain bearings PROIGUS S.A.C. Thanapoom Tower Phone +44 1604 677240 Phone +84 8 38204466 [email protected] 1044 Budapest Mecanix Shops 53 Singapore– ASEAN HQ ® +420 416 7113 39 Calle Bolivar 388/of. 203 igus S.L. 1550 New Petchaburi Road Fax +44 1604 677242 Fax +84 8 38204080 Phone +36 1 3066486 Gebran Safi ® Fax +420 416 7119 99 Miraflores igus Singapore Pte Ltd Ctra. Llobatona, 6 Makkasan Ratthawi [email protected] [email protected] 8 Brazil [email protected] Fax +36 1 4310374 Charles Helou Avenue Lima 18 – Perú 84 Genting Lane Polígono Noi del Sucre Bangkok 10400 Thailand [email protected] Beirut Phone +51 1 2414370 ® #06-03 Cityneon Design Centre 08840 Viladecans – BCN Phone +66 (0)2 652 7325 igus do Brasil Ltda. Phone +961 1 486701 Fax +51 1 2428608 Singapore 349584 Phone +34 936 473950 Fax +66 (0)2 652 7326 68 Ukraine Avenida Marginal Norte da 17 Denmark 25 Hungary Fax +961 1 490929 [email protected] Phone +65 64 87 1411 Fax +34 936 473951 [email protected] Cominpro Ltd. via Anhanguera 53.780 igus® ApS [email protected] Fax +65-64 87 1511 [email protected] Vila Rami – Jundiaí Tech-Con Kft. Romena Rollana 12, Nordre Strandvej 119A 46 Philippines [email protected] 64 Tunisia Office 220 CEP 13206-245 – SP DK-3150 Hellebæk Vésõ utca 9-11 Phone +55 11 3531-44 87 1133 Budapest 36 Lithuania 59 Sweden 61058 Kharkov Phone +45 86 603373 Silicon Exponents Corp. BOUDRANT Phone +38 0577174914 Fax +55 11 3531-44 88 Phone +36 1 4124161 Hitech UAB 54 Slovakia ® Fax +45 86 60 32 73 Suite 6A, 8414 Dr. A. Santos igus ab 53, Avenue de Carthage Fax +38 0577174914 [email protected] Fax +36 1 412 4171 Terminalo g. 3 ® [email protected] Ave., Sucat, igus Slovakia s.r.o. Knut Påls väg 8 1000 Tunis – Tunisia [email protected] [email protected] 54469 Biruliskiu k. (Kauno LEZ) 1700 Paranaque City, Fatranská 3 256 69 Helsingborg Phone +216 71340244 Kauno raj. Metro Manila Phone +46 42 329270 Fax +216 71348910 9 Bulgaria 18 Ecuador 949 01 Nitra 26 India Phone +370 37 323271 Phone +63 2 8250126 Slovakia Fax +46 42 211585 [email protected] 68 Ukraine igus® EOOD Fax +370 37 203273 Fax +63 2 8250141 Ecuainsetec ® Mob. +421 949 459 409 [email protected] Hennlich Ukraine LLC (HQ) 2, Lui Ayer str., fl.4, off. 4 El Zurriago E9-32 y el Vengador igus (India) Pvt. Ltd. [email protected] [email protected] [email protected] 1404 Sofia, Bulgaria 36/1, Sy No. 17/3 65 Turkey Kramatorska Street 15 Quito 84100 Slovyansk City, Phone +359 2 850 8409 Euro School Road, 59 Sweden – the-chain igus® Turkey Phone +593 2 2253757 37 Macedonia, Albania, 47 Poland Slovakia Donetsky Region Fax +359 2 850 8409 Fax +593 2 2461833 Dodda Nekkundi Industrial 54 OEM Automatic AB Güzeller Org. San. Bölg. [email protected] Area, - 2nd Stage Kosovo ® Phone +38 06262 33540 [email protected] igus Sp. z o.o. Hennlich s.r.o. Box 1011 Dalagatan 4 Galvano Teknik San. Sit. [email protected] Mahadevapura Post Hennlich DOOEL ul. Działkowa 121C Račianska 188 573 28 Tranås Cumhuriyet Cad. 2/32 Bangalore 560048 Boris Kidric 88 02-234 Warszawa Phone +46 75 2424100 Gebze / Kocaeli 9 Bulgaria 19 Egypt SK-831 53 Bratislava Phone +91 80 45127800 1200, Tetovo MK Phone +48 22 8635770 Phone +421 2 50202504 Fax +46 75 2424159 Phone +90 (0) 262 502 14 08 69 Uruguay Hennlich OOD, BG Fedicom Trading Fax +91 80 45127802 Phone +389 44614411 Fax +48-22 8636169 +421 2 50202505 [email protected] Fax +90 (0) 262 502 14 19 Larrique Rulemanes SA 4003 Plovdiv, Bulgaria Mohamed Fayed Sami & Co. [email protected] Mob. +389 76 200 770 [email protected] Fax +421 2 50202520 [email protected] 147A, Brezovsko shose Str., Galicia 1204 12, El Mahaad El Swissri St., [email protected] [email protected] ® Rota center, fl. 3 59 Sweden – dry-tech Montevideo-Uruguay Flat 10 – 2nd Floor-Zamalek 27 Indonesia 48 Portugal Phone +598 29021773 Phone +359 32 511 326 Cairo – A.R of Egypt Colly Components AB 65 Turkey Fax +359 32 621 929 PT igus® Indonesia 38 Malaysia ® 55 Slovenia Fax +598-29084824 Phone +202 27362537 igus Lda. Raseborgsgatan 9 HIDREL Hidrolik Elemanlar [email protected] [email protected] Fax +202 27363196 German Centre Suite 6040-6050 igus® Malaysia Sdn Bhd R. Eng. Ezequiel igus® d.o.o. P.O. Box 76 Sanayi ve Ticaret A.S. [email protected] Jalan Kapten Subijanto Dj. Suite 1601-1, Level 16, Campos, 239 Tržaška c. 134 164 94 Kista Percemli Sk. No. 7 BSD City Tower 2, Wisma AmFirst, 4100-231 Porto 1000 Ljubljana Phone +46 8 7030100 Tünel Mevkii Tangerang 15321 Jalan 7/15 (Jalan Stadium), Phone +351 22 6109000 Slovenija Fax +46 8 7039841 34420 Karaköy / Istanbul Phone +62 21 537 61 83 / 84 47301 Kelana Jaya, Selangor Fax +351 22 8328321 Mob. +386 (0)30 601 610 [email protected] Phone +90 212 2494881 [email protected] Phone +603 7880 5475 [email protected] [email protected] Fax +90 212 2920850 Fax +603 7880 5479 [email protected] [email protected] 62 63

EN_wordmap_270916.indd Alle Seiten 27.09.2016 17:38:21 /9001:2008

/16949:2009® igus is certified in accordance with ISO 9001:2008 and ISO/TS 16949:2009 in the field of energy supply systems, cables and harnessing, as well as plastic bearings. /newsletter Free of charge! Learn more about trends and inno- vations from the igus® motion plastics® world. Many exciting applications and videos, from your industry as well. Register here: www.igus.eu/newsletter

igus® GmbH Spicher Str. 1a 51147 Cologne Germany Phone +49 2203 9649-145 Fax +49 2203 9649-334 [email protected] www.igus.eu

© 2014 igus® GmbH

Published by igus® GmbH, Germany MAT0071573.20 Issue 10/2016 Subject to technical alterations