Visual NAND Reconstructor

Visual NAND Reconstructor is a powerful and user-friendly tool for chip-off data recovery and digital forensic projects on broken NAND flash storage devices. It has a universal NAND Reader that can read memory of any NAND package.

The NAND reader reads a physical image (dump) out of a chip via a special adapter, then the software processes the physical image and convert it to a logical image with file system.

Typical Scenarios  Physical damage  Electrical damage  Firmware failure  Thermal damage  Non-recognizable disk in OS  Analysis of “non-addressed areas” of NAND

Supported Data Storage Devices USB, SSD, SD card, monolithic flash media, Micro SD card, MS card, XD card, digital voice recorder, MP3 player, tablet, smartphone, other NAND based data storage devices

Supported NAND memory Micron (2Ch), (89h), (98h), Sandisk (45h), Hynix (ADh), Samsung (ECh), other ONFI and non-standard.

Supported Controllers Alcor Micro (AU), Innostor (IS), Jmicron (JMF), Indilinx (IDX), ITE (IT), Lexar (FC), (PS), Samsung, Sandisk, (SM), Skymedi (SK), Solid State Drive (SSD), Flash Drive, Stec, Toshiba (TC), USBest (UT), others

T E C H N O L O G Y M A K E S P O S S I B I L I T Y

Visual NAND Reconstructor

NAND Reader The NAND reader reads a physical image (dump) out of a flash memory chip via a special adapter.

Supported NAND Packages  TSOP48, LGA52 (12x17mm/14x18mm), LGA60, TSOP56, BGA100, BGA152, BGA154, BGA224, Monolithic chips.  Samsung, Sandisk, Hynix, Toshiba, Intel, Micron and others

Data Transfer Protocols  Asynchronous ONFI  DDR  WL tripple address  WL tripple address with DDR

NAND Architectures SLC, MLC, TLC

Power Adjustment  Power adjustment of Core and I/O ports of NAND chips from 1.6V to 4.0V.  Helps to reduce bit errors that appear while memory chip is reading under standard 3.3 Volts.  Voltage level can be adjusted through software.

NAND Access Modes  Read NAND physical image to dump file (data recovery and digital forensics)  Real-time access (Bit error estimation, NAND configuration analysis, ECC-Correction)

I/O Data Bus According to ONFI standard and Samsung recommendations the reader supports 8-bit and 16-bit data bus.

Speed Data transfer rate is 7-10 Mb/s depending on NAND chip.

Interfaces  Mini-USB 2.0 interface for connecting to PC  ZIF interface for adapter connection

T E C H N O L O G Y M A K E S P O S S I B I L I T Y

Visual NAND Reconstructor

Specifications

Item Specification Product Name Visual NAND Reconstructor Model DER-VNR Main Function Automatic/Manual NAND chip-off data recovery and digital forensic Product Kit NAND Memory Chip Reader Adapters set VNR Software Supported Storages USB, SSD, SD card, monolithic flash media, Micro SD card, MS card, XD card, digital voice recorder, MP3 player, tablet, smartphone, other NAND based data storage devices Supported NAND TSOP48, LGA52 (12x17mm/14x18mm), LGA60, TSOP56, BGA100, Package BGA152, BGA154, BGA224, Monolithic chips Samsung, Sandisk, Hynix, Toshiba, Intel, Micron, others NAND Architectures SLC, MLC, TLC Supported Controllers Alcor Micro (AU), Innostor (IS), Jmicron (JMF), Indilinx (IDX), ITE (IT), Lexar (FC), Phison (PS), Samsung, Sandisk, Silicon Motion (SM), Skymedi (SK), Solid State Drive (SSD), Flash Drive, Stec, Toshiba (TC), USBest (UT), others Data Transfer Rate 7-10 Mb/s depending on NAND chip Interface – Connection Mini-USB 2.0 to PC Interface – Connection ZIF interface to Adapter LED indicators Green – USB power Yellow – NAND power Red – Error OS Requirement Windows driver for x64/x86 Windows7/8 platforms, recommended operating system is windows 8 x64 Specifications are subject to change without notice

T E C H N O L O G Y M A K E S P O S S I B I L I T Y