Character Sets

Total Page：16

File Type：pdf, Size：1020Kb

E Character Sets This appendix provides character sets available for this printer. Available character sets depend on the emulation selected. They are as follows: • Common to IBM 2390+ emulation and Epson EP2 emulation Default sets • IBM 2390+ emulation Set 1 and set 2 • Epson EP2 emulation National character sets These character sets include different characters and symbols that are in accordance with the intended languages or usages. Note that some character sets, even if they have the same character set name, may not have certain characters or symbols, depending on the resident fonts selected. For details, see the table at the end of this appendix. Common to IBM 2390+ Emulation and Epson EP2 Emulation The ASCII character set and the National Replacement Character sets are given in Appendix C. The following eighteen character sets are available. Code pages 437, 437Greek, 850, 851, 852, 853, 855, 857, 858, 860, 863, 864, 865, 866, 869, 920, 923 and USSR GOST. Character Sets Code Page 437 Code Page 437Greek E-2 Character Sets Code Page 850 Code Page 851 E-3 Character Sets Code Page 852 Code Page 853 E-4 Character Sets Code Page 855 Code Page 857 E-5 Character Sets Code Page 858 Code Page 860 E-6 Character Sets Code Page 863 Code Page 864 E-7 Character Sets Code Page 865 Code Page 866 E-8 Character Sets Code Page 869 Code Page 920 E-9 Character Sets Code Page 923 Code Page USSR GOST E-10 Character Sets IBM 2390+ Emulation IBM Set 1 and 2 IBM character set 1 and IBM character set 2 IBM SET1 IBM SET2 E-11 Character Sets Epson EP2 Emulation National Character Sets The following fifteen character sets are available. USA, France, Germany, UK, Denmark 1, Sweden, Italy, Spain 1, Japan, Norway, Denmark 2, Spain 2, Latin America, Korea, and Legal Common Characters The following table shows characters common to the fifteen “national” character sets. NR indicates characters that differ with languages. E-12 Character Sets National Characters The following table shows “national” characters that differ with languages. Character codes correspond to NRs in the preceding table. E-13 .

Copy Link

Recommended publications

Cumberland Tech Ref.Book
Forms Printer 258x/259x Technical Reference DRAFT document - Monday, August 11, 2008 1:59 pm Please note that this is a DRAFT document. More information will be added and a final version will be released at a later date. August 2008 www.lexmark.com Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. © 2008 Lexmark International, Inc. All rights reserved. 740 West New Circle Road Lexington, Kentucky 40550 Draft document Edition: August 2008 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time. Comments about this publication may be addressed to Lexmark International, Inc., Department F95/032-2, 740 West New Circle Road, Lexington, Kentucky 40550, U.S.A. In the United Kingdom and Eire, send to Lexmark International Ltd., Marketing and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ. Lexmark may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
[Show full text]
Guía Del Usuario T5040 Impresora De Sobremesa MARCAS REGISTRADAS Centronics Es Una Marca Comercial De Centronics Data Computer Corporation
Guía del usuario T5040 Impresora de sobremesa MARCAS REGISTRADAS Centronics es una marca comercial de Centronics Data Computer Corporation. PCL y PCLXL son marcas comerciales de Hewlett-Packard Company. IBM y IBM PC son marcas comerciales de International Business Machines Corporation. Apple, AppleTalk, TrueType, Laser Writer y Machintosh son marcas comerciales de Apple Computer, Inc. Microsoft, Windows, Windows 9x, Windows ME, Windows 2000, Windows NT, Windows XP y MS-DOS son marcas registradas de Microsoft Corporation. PostScript es una marca comercial de Adobe Systems Inc. Todos los demás nombres o las demás marcas de productos son marcas comerciales de sus respecti- vas empresas u organizaciones. Guía del usuario Contenido Contenido Introducción 1 Características de la impresora 1 Interfaces 1 Emulaciones 1 Símbolos convencionales 1 Acerca del presente manual 2 1 Vista de conjunto 3 Vista de frente 3 Vista con la tapa abierta 3 Vista de atrás 4 2 Instalación 5 Desembalar la impresora 5 Colocar la impresora 6 Comprobar la tensión de la impresora 8 Conectar la impresora 9 Encender la impresora 10 3 Driver de impresora y firmware 11 Driver de impresora 11 Instalar un driver de impresión en Windows 95/98/ME 11 Instalar un driver de impresora en Windows 2000/2003/XP 11 Instalar un driver de impresora en Windows 7 13 Instalar un driver de impresora en Windows Vista 14 Otros sistemas operativos 15 Cambiar los ajustes de impresora 16 Propiedades de formularios (Windows 2000/2003/XP/ Vista/Windows 7/2008) 17 Cargar firmware 18 Interfaz 18 I
[Show full text]
Programmer's Manual SP2000 Series
Dot Matrix Printer SP2000 Series Programmer’s Manual TABLE OF CONTENTS 1. Control Codes (Star Mode) ......................................................................... 1 1-1. Control Codes List .............................................................................. 1 1-1-1. Character Selection .................................................................. 1 1-1-2. Print Position Control ............................................................... 3 1-1-3. Dot Graphics Control ............................................................... 4 1-1-4. Download Graphics Printing .................................................... 4 1-1-5. Peripheral Device Control ........................................................ 4 1-1-6. Auto Cutter Control (SP2500 type printers only) .................... 5 1-1-7. Commands to Set the Page Format .......................................... 5 1-1-8. Other Commands...................................................................... 6 1-2. Control Code Details ........................................................................... 7 1-2-1. Character Selection .................................................................. 7 1-2-2. Print Position Control ............................................................. 17 1-2-3. Dot Graphics Control ............................................................. 25 1-2-4. Download Graphics Printing .................................................. 28 1-2-5. Peripheral Device Control .....................................................
[Show full text]
IGP® / VGL Emulation Code V™ Graphics Language Programmer's Reference Manual Line Matrix Series Printers
IGP® / VGL Emulation Code V™ Graphics Language Programmer’s Reference Manual Line Matrix Series Printers Trademark Acknowledgements IBM and IBM PC are registered trademarks of the International Business Machines Corp. HP and PCL are registered trademarks of Hewlett-Packard Company. IGP, LinePrinter Plus, PSA, and Printronix are registered trademarks of Printronix, LLC. QMS is a registered trademark and Code V is a trademark of Quality Micro Systems, Inc. CSA is a registered certification mark of the Canadian Standards Association. TUV is a registered certification mark of TUV Rheinland of North America, Inc. UL is a registered certification mark of Underwriters Laboratories, Inc. This product uses Intellifont Scalable typefaces and Intellifont technology. Intellifont is a registered trademark of Agfa Division, Miles Incorporated (Agfa). CG Triumvirate are trademarks of Agfa Division, Miles Incorporated (Agfa). CG Times, based on Times New Roman under license from The Monotype Corporation Plc is a product of Agfa. Printronix, LLC. makes no representations or warranties of any kind regarding this material, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. Printronix, LLC. shall not be held responsible for errors contained herein or any omissions from this material or for any damages, whether direct, indirect, incidental or consequential, in connection with the furnishing, distribution, performance or use of this material. The information in this manual is subject to change without notice. This document contains proprietary information protected by copyright. No part of this document may be reproduced, copied, translated or incorporated in any other material in any form or by any means, whether manual, graphic, electronic, mechanical or otherwise, without the prior written consent of Printronix, LLC.
[Show full text]
Owner's Manual
OWNER’S MANUAL LED TV* *LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your TV and retain it for future reference. MT44* MT45* www.lg.com 2 TABLE OF CONTENTS ENGLISH ENGLISH 37 - SETUP Settings TABLE OF CONTENTS 37 - PICTURE Settings 40 - AUDIO Settings 3 LICENSES 42 - TIME Settings 42 - OPTION Settings 4 ASSEMBLING AND PREPARING 43 - LOCK Settings 4 Unpacking 44 TELETEXT 6 Parts and buttons 7 - Using the joystick button 44 Switch On/Off 10 Lifting and moving the TV 44 Simple Text 11 Setting up the TV 44 - Page selection 11 - Attaching the Stand 44 - Programming a colour button in LIST 13 - Detaching the Stand mode 15 Mounting on a table 44 Fastext 17 Mounting on a wall 44 - Page selection 45 Special Teletext Function 19 MAKING CONNECTIONS 46 MAINTENANCE 19 Antenna Connection 20 Other Connections 46 Cleaning Your TV 46 - Screen, frame, Cabinet and stand 22 REMOTE CONTROL 46 - Power cord 46 Preventing “Image burn” or “Burn-in” on your TV screen 23 WATCHING TV 23 Turning the TV on for the first time 47 TROUBLESHOOTING 23 Watching TV 23 Managing programmes 49 SPECIFICATIONS 23 - Automatically setting up programme 24 - Manually setting up programme 25 - Editing your programme list 25 - Selecting a programme on the programme list 26 Using additional options 26 - Adjusting aspect ratio 27 - Using the input list WARNING y If you ignore the warning message, you 28 ENTERTAINMENT may be seriously injured or there is a 28 Connecting USB storage devices possibility of accident or death.
[Show full text]
ANSI® Programmer's Reference Manual Line Matrix Series Printers
ANSI® Programmer’s Reference Manual Line Matrix Series Printers Printronix, LLC makes no representations or warranties of any kind regarding this material, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. Printronix, LLC shall not be held responsible for errors contained herein or any omissions from this material or for any damages, whether direct, indirect, incidental or consequential, in connection with the furnishing, distribution, performance or use of this material. The information in this manual is subject to change without notice. This document contains proprietary information protected by copyright. No part of this document may be reproduced, copied, translated or incorporated in any other material in any form or by any means, whether manual, graphic, electronic, mechanical or otherwise, without the prior written consent of Printronix, LLC Copyright © 1998, 2012 Printronix, LLC All rights reserved. Trademark Acknowledgements ANSI is a registered trademark of American National Standards Institute, Inc. Centronics is a registered trademark of Genicom Corporation. Dataproducts is a registered trademark of Dataproducts Corporation. Epson is a registered trademark of Seiko Epson Corporation. IBM and Proprinter are registered trademarks and PC-DOS is a trademark of International Business Machines Corporation. MS-DOS is a registered trademark of Microsoft Corporation. Printronix, IGP, PGL, LinePrinter Plus, and PSA are registered trademarks of Printronix, LLC. QMS is a registered
[Show full text]
Okidata 320/390/420 Turbo
Okidata 320/390/420 Turbo Microline Printers Specifications Print Method: Okidata 320/420: 9-Pin (0.34 mm dia.) serial impact dot matrix Okidata 390: 24-Pin (0.20 mm dia.) serial impact dot matrix Graphics Resolution: PRINTERS Okidata 320/420: 240 (H) x 216 (V) DPI maximum (Epson®/IBM®) Okidata 390: 360 (H) x 360 (V) DPI maximum (Epson/IBM AGM) Print Speed** (cps): Okidata 320: NLQ: 75; Utility: 300; High Speed Draft: 390; Super Speed Draft: 435 Okidata 390: LQ: 105; Utility: 315; Super Speed Okidata 320 Turbo Microline Draft: 390 (15 cpi) Okidata 420: NLQ95; High Speed Draft: 5p 510; Utility: 570, Super 570 Feed Rate: Standard Features 5.0 ips • Vertical tabs Emulations: • Long-lasting, self-inking ribbon cartridge Okidata 320: Epson EX-PPR II and OKI® Microline® Okidata 390: Epson ESC/P2, IBM ProPrinter® and • Bit image graphics for plotting charts, graphs and drawings IBM AGM • Full ASCII character set Okidata 420: Epson Fx IMB Pro Point Micro • Friction and adjustable pin feed paper handling Interface: Okidata 320/390/420: IEEE 1284 bidirectional Okidata 320/420 Turbo*: parallel; Windows® 95 plug and play compatible, USB • Nine-pin, long-life print head (parallel input) Okidata 390: Centronics® and IEEE 1284 • Centronics®-compatible parallel interface bidirectional parallel • Near letter-quality printing at 63 characters per second Compatibility: • 80 columns with standard characters, 160 columns with condensed characters Windows® XP, 2000, 98/95 • Front access panel for quick and easy control of type size, print quality and other
[Show full text]
ANSI® Programmer’S Reference Manual
® ANSI® Programmer’s Reference Manual ANSI® Printers Programmer’s Reference Manual ® Trademark Acknowledgements Printronix, Inc. Unisys MTX, Inc. Memorex Telex Decision Systems InternationalDecision Data, Inc. makes no representations or warranties of any kind regarding this material, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. Printronix, Inc. Unisys MTX, Inc. Memorex Telex Decision Systems InternationalDecision Data, Inc. shall not be held responsible for errors contained herein or any omissions from this material or for any damages, whether direct, indirect, incidental or consequential, in connection with the furnishing, distribution, performance or use of this material. The information in this manual is subject to change without notice. This document contains proprietary information protected by copyright. No part of this document may be reproduced, copied, translated or incorporated in any other material in any form or by any means, whether manual, graphic, electronic, mechanical or otherwise, without the prior written consent of Printronix, Inc.Unisys.MTX, Inc. Memorex Telex. Decision Systems International.Decision Data, Inc. Copyright © 1998, 2010 Printronix, Inc. All rights reserved. Trademark Acknowledgements ANSI is a registered trademark of American National Standards Institute, Inc. Centronics is a registered trademark of Genicom Corporation. Dataproducts is a registered trademark of Dataproducts Corporation. Epson is a registered trademark of Seiko Epson Corporation. IBM and Proprinter are registered trademarks and PC-DOS is a trademark of International Business Machines Corporation. MS-DOS is a registered trademark of Microsoft Corporation. Printronix, IGP, PGL, LinePrinter Plus, and PSA are registered trademarks of Printronix, Inc. QMS is a registered trademark and Code V is a trademark of Quality Micro Systems, Inc.
[Show full text]
D Printer Commands 207 D Printer Commands
Appendix D Printer commands 207 D Printer commands Overview Most software applications do not require you to enter printer commands. See your computer and software documentation to find the method for entering printer commands, if needed. This appendix includes: z Understanding PCL 5e printer command syntax z Selecting PCL 5e fonts z Common PCL 5e printer commands Note The table at the end of this appendix contains commonly used PCL 5e commands (See “Common PCL 5e printer commands” on page 212). To order a PCL 5/PJL Technical Reference Documentation Package, see www.hp.com/support/lj9000. Overview Appendix D Printer commands 208 PCL 5e PCL 5e printer commands tell the printer which tasks to perform or which fonts to use. This appendix provides a quick reference for users familiar with PCL 5e command structure. Note Unless PCL 5e backward compatibility is required, HP recommends that PCL 6 printer drivers be used to take full advantage of all printer features. The PCL 5e printer driver in this printer is not backward compatible with older printers that use PCL 5e printer drivers. HP-GL/2 The printer has the ability to print vector graphics using the HP-GL/2 graphics language. Printing in the HP-GL/2 language requires that the printer leave PCL 5e language and enter HP-GL/2 mode, which can be done by sending the printer PCL 5e code. Some software applications change languages through their drivers. PJL HP’s Printer Job Language (PJL) provides control above PCL 5e and other printer languages. The four major functions provided by PJL are: printer language changing, job separation, printer configuration, and status readback from the printer.
[Show full text]
FUJITSU Dl7600pro DOT MATRIX PRINTER USER's MANUAL
FUJITSU DL7600Pro DOT MATRIX PRINTER USER'S MANUAL IMPORTANT NOTE TO USERS READ THE ENTIRE MANUAL CAREFULLY BEFORE USING THIS PRODUCT. INCORRECT USE OF THE PRODUCT MAY RESULT IN INJURY OR DAMAGE TO USERS, BYSTANDERS OR PROPERTY. While FUJITSU ISOTEC has sought to ensure the accuracy of all information in this manual, FUJITSU ISOTEC assumes no liability to any party for any damage caused by any error or omission contained in this manual, its updates or supplements, whether such errors or omissions result from negligence, accident, or any other cause. In addition, FUJITSU ISOTEC assumes no liability with respect to the application or use of any product or system in accordance with descriptions or instructions contained herein; including any liability for incidental or consequential damages arising therefrom. FUJITSU ISOTEC DISCLAIMS ALL WARRANTIES REGARDING THE INFORMATION CONTAINED HEREIN, WHETHER EXPRESSED, IMPLIED, OR STATUTORY. FUJITSU ISOTEC reserves the right to make changes to any products described herein without further notice and without obligation. Using This Product in High-risk Situations This Product is designed, developed and manufactured as contemplated for general use, including without limitation, general office use, personal use, household use, and ordinary industrial use, but is not designed, developed and manufactured as contemplated for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could lead directly to death, personal injury, sever physical damage or other loss(hereinafter “High Safety Required Use”), including without limitation, nuclear control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system.
[Show full text]
User Guide IGP for SIDM Printers
User Guide IGP for Dot Matrix Printers Mantenimiento Periféricos Informaticos C/Canteras, 15 28860 Paracauellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/ IGP for Dot Matrix Printers User Guide Scope This User Guide is to be considered as an enhancement to the standard documentation of your printer. Hence keep the printer’s standard documentation ready as your particular printer model is pictured in detail. 2 Mantenimiento Periféricos Informaticos C/Canteras, 15 28860 Paracauellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/ Table of Contents Table of Contents Subject Listing SCOPE........................................................................................................................................................... 2 CHAPTER 1: CONTROL PANEL ............................................................................................................ 7 BASIC ELEMENTS ........................................................................................................................................ 7 MENU STRUCTURE ...................................................................................................................................... 8 MENU PARAMETERS.................................................................................................................................... 9 MENU PRINTOUT EXAMPLE....................................................................................................................... 17 WEBPANEL ENHANCEMENTS ...................................................................................................................
[Show full text]
Forms Printer 248X/249X
Forms Printer 248x/249x Technical Reference October 2000 www.lexmark.com Third Edition (October 2000) The following paragraph does not apply to the United Kingdom or any country where such provisions are inconsistent with local law: LEXMARK INTERNA- TIONAL, INC. PROVIDES THIS PUBLICATION “AS IS” WITHOUT WAR- RANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions of the publication. Improvements and/or changes in the product(s) and/or the program(s) described in this publication may be made at any time. Publications are not stocked at the address given below; requests for publications should be made to your point of purchase. A form for reader's comments is provided at the back of this publication. If the form has been removed, comments may be addressed to Lexmark International, Inc., Department F95/035-3, 740 New Circle Road N.W., Lexington, Kentucky 40511-1876, U.S.A. Lexmark may use or distribute any of the information you sup- ply in any way it believes appropriate without incurring any obligation to you. Lexmark is a trademark of Lexmark International, Inc. Other trademarks are the property of their respective owners. © Copyright Lexmark International, Inc. 1993, 2000. All rights reserved. UNITED STATES GOVERNMENT RESTRICTED RIGHTS This software and documentation are provided with RESTRICTED RIGHTS.
[Show full text]