Office/Tech: 641-623-5401

N.C. ORDNANCE STOCK WORK INDEX NEIDNER BUTT PLATE & GRIP CAP REPRODUCTION BUTTPLATES Bedding Supplies ...... 412-418 Shaping/Inletting Tools...... 411-412 Reproductions Of The Factory Originals Buttplates & Grip Caps...... 402-404 Stock Adjusters...... 407-408 Checkered Steel Adds The Hallmark Of Quality High-quality, detailed reproduction buttplates look and feel like the originals and make restoring an Checkering Supplies...... 409-411 Stock Finishing Supplies. . . . 418-420 old rifle or shotgun easy work. Built using original fac- Now back in production, the tory patterns, so you know the screw holes, checkering, Fitting Jigs & Gauges...... 409 Stock Hardware...... 402 classic Neidnerstyle, checkered company brand logos and borders are a perfect match. steel butt plates and grip caps give a secure, no-slip Outside edges grind easily for a perfect fit. Molded from Recoil Pads...... 404-407 Takedown Tools...... 402 surface, plus that touch of traditional elegance. Curved a special, high-strength polyurethane that’s resistant to butt plate with pointed heel tip is functional and com- most solvents. ab STOCK WORK STOCK Recoil Reducers...... 408-409 fortable. Single-screw grip cap is smooth on the outside SPECS: Polyurethane, black. edge with raised, checkered oval in the center. Screws included. ab STOCK # STYLE DIMENSIONS 1 SPECS: Steel, blued, checkered. Butt Plate; 5 /16" (12.8cm) x RIFLE BUTTPLATES ALLAN FOUNDRY LEVER ACTION 1 13 1 /2" (3.8cm). 3" (7.6cm) c-to-c hole spacing. Grip Cap; 1 /16" 5 #100-003-886AT Rem-UMC M10 (5" x 1.7") (4.6cm) x 1 /16" (3.3cm). ORIGINAL STYLE BUTTPLATE #100-003-885AT Rem-UMC M12/141 (4.3" x 1.2") STOCK TAKEDOWN SET #078-010-100AT Checkered Butt Plate, 8D32M15 �� $ 36.00 Classic Shape & Look For #100-003-887AT Rem. M512/550 (4.7" x 1.5") All The Tools Needed #078-010-110AT Checkered Grip Cap, 8D23Q74 �� 25.00 Restoration Or New #100-003-888AT Savage M99 Trademark (4.6" x 1.4") To Prevent Split Stocks #100-003-883AT Stevens Favorite (4.2" x 1.3") Reproduced from original factory designs to The very best possible tools for re- look right when restoring an older gun or build- #100-003-878AT Win. 1894 Pre-64 (4.8" x 1.6") moving most styles of buttstock bolts and ing a custom rifle. Curved, cast steel buttplate #100-003-876AT Win. 1906 (4.1" x 1.1") action spring tube nuts. The thin-walled comes in-the-white, ready for final fitting and #100-003-877AT Win. M61/67/69/72/1910 (4.75" x 1.5") sockets are correct to prevent slipping MCFARLAND bluing. Marlin Lever Action/Winchester 1886 #100-003-879AT Win. M70/88/100 (5.1" x 1.6") and burring. The drag-link bit is round at the drive end, which auto- Hi-Wall models require drilling and counterbor- TRADITIONAL STEEL BUTTPLATE SHOTGUN BUTTPLATES matically centers the blade in the stock bolt hole and makes fitting ing screw holes. Universal model with pointed it into the slot about 1,000 times easier!! Plus, they work for other heel, similar to Neidner style, features counter- A Beautiful, Classic Touch For Custom Rifles #100-003-889AT Browning Auto-5 (5.2" x 1.75") shop jobs, too. #100-003-890AT Browning Superposed 12 Ga. (5.3" x 1.75") 3 bored screw holes for a flush-fit of installation screws. Mounting SPECS: Set - Includes T-handle, 9" (22.9cm) drive extension, (5) /8" screws not included. ab Graceful contour with a slight curve adds an un- #100-003-891AT Browning Superposed 20 Ga. (5.4" x 1.6") (9.5mm) drive sockets, and drag link bit. Sockets & Drag Link - Includes 1 5 SPECS: Steel. In-the-white. Marlin/Winchester - 4 /2" (11.6cm) long, 1 /16" mistakable touch of class to any rifle. Perfect for en- all (5) drive sockets and drag link bit. 3 5 #100-003-892AT Ithaca M37 (4.9" x 1.5") (3.3cm) wide. Universal - 5 /16" (13.2cm) long x 1 /8" (4.1cm) wide. graving, checkering or just leave plain. Blues or case #100-003-880AT L.C. Smith 12 Ga. (5" x 1.7") #080-809-000AT Stock Takedown Set, 8K95K82 ��$ 107.99 #011-002-100AT Marlin Buttplate, 1A24M65 �� $ 27.99 hardens beautifully. All edges have slight draft for #080-027-000AT T-Handle, 8K38N29 �� 39.99 precise fitting. Skeleton models have open centers #100-003-881AT L.C. Smith 16-20 Ga. (4.8" x 1.5") tools takedown #011-002-101AT Winchester Buttplate, 1A24L65 �� 27.99 and rounded attaching point contours that outline #100-003-882AT L.C. Smith Oversized (5.5" x 1.9") #080-212-010AT 9" Extension, only, 8K21C72 �� 24.99 #011-000-001AT Universal Buttplate, 1A25M23 �� 29.99 the stock to show beauty of the wood. Solid models #100-003-884AT Rem. M11 (5" x 1.7") #080-212-006AT 6" Drive Extension, 8K16Q62 �� 17.99 provides wonderful area for checkering and engrav- #080-809-001AT Sockets & Drag Link, only, 8K55N26 �� 72.39 ing. English Style has traditional, pointed heel tip. ab #100-003-873AT Win. 1897 (5.2" x 1.7") 5 SPECS: Mild steel, in-the-white. 5" (12.7cm) long, 1 /8" #100-003-874AT Win. M12/12 Ga. (5.1" x 1.5") (4.1cm) wide, .100" (2.5cm) thick. Supplied with flat top, #100-003-875AT Win. M12/16-20 Ga. (4.9" x 1.6") TREEBONE CARVING 8-24 screws. — Advise # — Rifle Buttplate, 8B12H76 ��$ 14.95 CLASSIC BUTTPLATE #597-000-001AT Skeleton Buttplate, 7E110F89 �� $ 125.00 — Advise # — Shotgun Buttplate, 8B12D76 �� 14.95 STOCK INSERTS #597-000-002AT Solid Buttplate, 7E77H62 �� 87.50 Traditional Style Adds A Touch Of Quality Secure Mounting Of Sling Studs, Recoil #597-000-003AT English Style Skeleton Buttplate, Pads & Triggerguards In Wood Or Classic, pre-war American pattern derived from vari- 7E110P89 �� 125.00 Synthetic Stocks ous Winchester and Sharps models. Slightly curved face #597-000-004AT English Style Solid Buttplate, with pointed heel tip and 18 lpi checkering. ab 7E77H62 �� 87.50 Sling Stud Insert CNC machined, threaded brass bushings SPECS: Investment cast 4140 steel, in-the-white. 5" (12.7cm) UNIVERSAL BUTTPLATE provide added strength and security for screwing down sling studs, long, 1.62" (4.1cm) wide. Replaces Worn, Chipped, Broken Factory Buttplates; recoil pads, and triggerguards in wood, composite, and fiberglass #507-000-001AT Model 70 Classic Buttplate, Preserves Original Appearance stocks. Lets you turn a screw in tight without the worry of stripping 7K48L79 �� $ 55.00 it out of the stock material. Heavily knurled on the outside to hold Speed up the restoration of that classic shotgun or rifle plenty of epoxy bedding for a rock-solid grip between the insert 100 STRAIGHT POLYMER by replacing a worn, chipped, or cracked buttplate with an and stock. Kit available for mounting sling studs, plus a 10-pak of affordable, grind-to-fit replacement of moldable polyure- general-use inserts. ab BUTTSTOCK SPACER thane resin. Durable resin looks and feels like the hard rub-

hardware stock 1 5 SPECS: Brass, knurled. /2" (12.7mm) long x /16" (7.9mm) diameter. All in- OHIO RIFLE COMPANY WINCHESTER Great Looking Spacers; ber, Bakelite, or black plastic used for the original buttplates serts have 10-32 tpi internal threads. Sling Stud Inserts - (2) inserts, (2) on many of these guns, and will not shrink, swell, or crack steel, dome-top sling studs, matte blued. General Use Iserts - (10) 10-32 BRASS BUTTPLATE Easy To Fit, Grind & Finish over time. Proprietary molding process uses the highest-quality tpi threaded inserts. molds engineered to prevent unsightly “flash” and air bubbles on the Checkered Brass Jet black or bright white, buttstock spacers made #080-000-682AT Sling Stud Inserts, 2-pak, 5D6B04 ��$ 6.99 finished product. Grinds easily without flaking or fracturing. Includes Really Dresses Up Your Rifle from strong, lightweight, polymer plastic for superior #080-000-685AT Inserts, 10-pak, 5D25K61 �� 29.99 fine-line, horizontal serrations often found on period buttplates, but sanding and machining characteristics. Slotted hole without the tricky borders that make grinding the sides difficult. Heat Dress up that 1950’s vintage Win- design makes it easy to match up with just about any briefly in boiling water or microwave to soften the resin so it can be chester lever rifle with these checkered hole location. The wide range of thicknesses avail- molded to the contour of your stock; the shape sets up well once buttplates available in gunmetal grey to able let you use them alone or in combination to cooled and is extremely durable. Drilled and counterbored to accept match original receiver finish or natural TALLEY MAGNUM CROSSBOLT adjust rifle or shotgun stocks for length of pull, or to two #12 buttplate screws, available separately. ab brass for a distinctive look. Precision ma- add a decorative and finishing touch to the stock. ab 3 4 3 7 SPECS: Molded polyurethane resin, black. Fitting required. Small - 4 / " chined checkering provides a positive grip SPECS: Black or white polymer plastic. 2 /16" (5.5cm) wide, 5 /8" (14.9cm) 1 15 Distributes Recoil; Adds A Custom Touch 2 16 3 1 1 (12.1cm) long, 1 / " (3.8cm) wide. 2 / " (7.5cm) hole spacing. Medium - 5" on your shoulder without slipping. Con- long. 2 /4" (6.9cm) minimum c-to-c hole spacing with /2" adjustment. /8" 5 15 7 8 16 8 1 1 (12.7cm) long, 1 / " (4.1cm) wide. 2 / " hole spacing. Large - 1 / " (4.8cm) Distributes recoil on heavy magnums. structed from soft brass for easy shaping (3.17mm) /4" (6.35mm) and /2" (12.7mm) thick. 7 wide, 5 /16" (13.8cm). 3" (7.6cm) hole spacing. and fitting to the buttstock, plus easily bends to match curved butt- 1 Heavy-walled tube goes inside the stock, se- #365-100-125AT /8" Black Polymer Spacer, 5F7F67 ��$ 9.99 stocks. Will not rust, break or shrink over time. ab #080-003-975AT Universal Buttplate, Small, 2D12N76 ��$ 14.95 cures between two “bolts” with specially designed heads. With sharp, 1 #365-100-250AT /4" Black Polymer Spacer, 5F8Q04 �� 9.99 squared edges for clean inletting. Finish to match stock contours. ab SPECS: Brass, gunmetal gray or natural finish. Adapts to fit other guns. #080-003-976AT Universal Buttplate, Med., 2D12I76 �� 14.95 1 3 1 1 1 3 7 4 4 8 #365-100-500AT /2" Black Polymer Spacer, 5F11M50 �� 12.99 SPECS: Tube /4" (6.3mm) dia., 1 /8" (3.5cm) long. Heads /16" (11.1mm) dia., 5 / " (13.3cm) long, 1 / " (4.4cm) wide, / " (3.1mm) thick. #080-003-977AT Universal Buttplate, Large, 2D12A76 �� 14.95 1 1 /8" (3.2mm) thick. Machined steel, in-the-white. #100-003-530AT Antique Brass, 7B23L65 �� $ 26.99 #365-101-125AT /8" White Polymer Spacer, 5F7Q41 �� 9.99 #080-000-260AT #12 Buttplate Screws, per doz., 1 #874-005-000AT Magnum Crossbolt, 4G6A40 ��$ 6.96 #100-003-532AT Gunmetal Gray, 7B23P65 �� 26.99 #365-101-250AT /4" White Polymer Spacer, 5F7K89 �� 9.99 8K7H57 �� 10.99

SATISFACTION GUARANTEED bu ttplates & g rip caps PAGE 402 SINCE 1939 Office/Tech: 641-623-5401 KICK-EEZ PACHMAYR SPACER LENARD BROWNELL FOREND TIP/GRIP CAP SETS BUTTSTOCK PITCH SPACER When “Just A Touch More” Is Needed STEEL GRIP CAP Gorgeous Walnut And Redwood - Guaranteed To Please Adjust Stock Fit Without Cutting Stock BLACK - Hard black rubber. NO white Designed By stripe.ab The Old Master Himself STOCK WORK Tapered spacers provide positive or negative pitch 3 3 REDWOOD BURL: - Swirling, deep red, SPECS: 5 /4" (19.6cm) x 2" (5cm) x /16" (4.76mm). angle. Easily finished polymer material blends well with Lenard Brownell designed birdseye burl. Set includes 2 pieces.ba stocks and recoil pads. Pre-drilled, oblong slot adapts to #692-920-002AT BSD-20 Black Spacer, 5K6F83 ��$ 8.99 SPECS: Approximate; sizes vary consider- this continental style steel grip 7 7 15 most hole spacings. ab ably: Large - 2 /8" (7.3cm) x 1 /8" (4.8cm) x 1 /16" 1 WHITE - Pliable, off-white/light tan rub- cap to satisfy his own need for a quality grip cap that would look 1 11 SPECS: Black polymer. 2.2" (5.6cm) wide. 5.8" (14.7cm) long. Tapers /4" (23.8mm); Small - 2 /8" (5.4cm) x 1 /16" (17.5mm) 1 1 1 ber. Sides turn white when you grind like it “belonged” on his superb custom rifles. Now available to 7 (6.3mm) to /16" (1.59mm) and /2" (12.7mm) to /16" (1.59mm). them.ab the trade, this beautiful cap is 8620 steel, which blues, engraves x /16" (11.1mm). 1 #440-105-003AT /4" Buttstock Pitch Spacer, 4D7E18 ��$ 8.39 3 1 SPECS: Approx. 5 /4" (19.6cm) x 2" (50cm) x /16" and color casehardens very well. It is investment cast rather than #461-100-001AT Redwood Tip/Grip Cap Set, 1F18L76 �� $ 20.99 1 #440-105-002AT /2" Buttstock Pitch Spacer, 4D10F48 �� 12.99 (1.59mm). stamped to give a better distribution of material and make a sturdy #692-920-001AT WPS-20 White Spacer, 5K6G62 ��$ 8.50 cap with even, well defined contours and perfect steps. The kind of CALIFORNIA ENGLISH WALNUT - Beauti- grip cap you can install with pride. Classic styling will compliment ful, highly colored and figured, circassian- any rifle whether it be a fancy, engraved work of art, or a first rate type, fancy grade with contrasting figures 100 STRAIGHT hunting rifle. ab and marbling. Set includes 2 pieces.ba 5 13 SPECS: 1 /16" (3.3cm) x 1 /16" (4.6cm). 1 oz. (28 g) wt. Unpolished, in-the- SPECS: Approximate; sizes vary considerably: PITCH BUTTSTOCK SPACER white, with full-length-threaded screw. 1 1 1 DAKOTA CUSTOM GRIP CAP Large - 2 /8" (5.4cm) x 2 /4" (5.7cm) x 3 /2" (9cm). 11 1 3 #095-003-001AT Unpolished L. Brownell Grip Cap, Small - /16" (17.5cm) x 2 /2" (6.3cm) x 3 /8" (8.6cm). Adjust Pull & Pitch Without Cutting The Stock A Stockmaker’s & each, 5K16D29 ��$ 16.99 #461-100-005AT English Walnut Tip/Cap Set, Tapered design allows for negative or positive Engraver’s Dream #095-003-002AT Extra Screw For Grip Cap, 5K5N99 �� 5.99 1F18P76 �� $ 20.99 adjustments in stock pitch without altering the Three custom grip stock; adjusts length of pull. Sands and finishes caps; Traditional Style “A”; beautifully. Slotted holes for universal fit. ab 3 “A” “B” “C” Scalloped Point “B”; and SPECS: Black polymer plastic. 2 /16" (5.5cm) wide. 7 3 Solid “C”; all with an ele- 5 /8" (15cm) long, 2 /4" (6.9cm) minimum c-to-c hole JOHNSON WOOD PRODUCTS 1 1 1 gant, domed profile and beautiful, oval shape. Skeleton caps made spacing. Tapers - /4" (6.3mm) to /16" (1.59mm) positive and negative, /2" N.C. ORDNANCE GRIP CAPS 1 with a 2° draft on the inside edges for faster, cleaner inletting. The (12.5mm) to /8" (1.5mm) positive and negative. Positive is thicker at top or solid cap is left full thickness so it can be deeply engraved in high Reproduction & Universal Models AMERICAN WALNUT TIP/GRIP CAP SET heel and will increase pitch. Negative is thicker at toe and will decrease relief or thinned, lightened or shaped to fit your needs. All are made For Any Project pitch. Kit contains one each of all four tapers. of soft, mild steel for easy shaping, engraving. ab Beautiful Wood For 13 9 #365-112-000AT Pitch Buttstock Spacer Kit, 5F39G74 �� $ 43.99 SPECS: 1 /16" (4.6cm) x 1 /32" (3.2cm). W/high topped 8-24 screws. Precision molded from high-strength Custom Rifle Builds #359-102-001AT Dakota “A” Skeleton Grip Cap, polyurethane to maintain crisp detail for a nice STK# POS. STK# NEG. TAPER PRICE 9E38K85 �� $ 44.99 finishing touch on custom guns or factory fire- Beautifully-figured 1 1 #365-114-125AT #365-114-025AT /4" - /16" 5F8I64 $ 9.99 #359-103-002AT Dakota “B” Skeleton Grip Cap, arms that need authentic looking restoration. American walnut blocks 1 1 Outside edges grind easily to provide a precise let gunsmiths make at- #365-112-150AT #365-112-050AT /2" - /8" 5F13C13 $ 13.99 9E38D85 �� 44.99 fit. Resistant to most solvents. Remington and tractive stock forend tips #359-104-000AT Dakota “C” Solid Grip Cap, 9E38F85 �� 44.99 Winchester models use the original factory and grip caps for custom rifles. Large block for forend tip, small Rem Shotgun patterns so they look and feel like the vintage block for grip cap. Available in Similar Figure, with very similar pat- factory part. Winchester models also include molded-in mounting terns and grains and Matched Figure, with matching patterns and KICK-EEZ BUTTSTOCK SPACER lugs on the back side for a solid fit. Starburst European, Coat of grains. Each set includes two wood blocks. ab 7 15 Arms, and Utility caps are universal designs that can be adapted to SPECS: Actual sizes vary considerably. Large - 2 /8" (7.3cm) long, 1 /16" Easy Fit & Finish With Traditional Appearance 7 1 11 MISCELLANEOUS GRIP CAPS any stock project. ab (23.8cm) wide 1 /8" high (4.8cm). Small - 2 /8" (5.4cm) long, 1 /16" (17.5) 7 SPECS: Polyurethane , black. Rem Shotgun - 1.7" (4.3cm) long x 1.4" wide, /16" high (11.1cm). Fashioned from durable black polymer, these spac- JERRY FISHER - Finish-ground top and (3.5cm) wide. Win Shotgun/M70 Rifle - 1.7" long x 1.3" (3.3cm) wide. Win ers sand and polish to a high quality finish. Slotted gracefully rounded contours. Screw #461-100-003AT American Walnut Tip/Grip Cap Set, Small Rifle - 1.5" (3.8cm) long x 1.2" (3.1cm) wide. Starburst European - mounting holes make it easy to match most screw loca- fits precisely into cap, and bottoms on Similar Figure, 1F14D15 �� $ 15.99 tions for ease of fitting. Three spacer sizes allow custom 1.6" (4.1cm) long x 1.1" (2.9cm) wide. Coat Of Arms - 1.7" long x 1.2" wide. shoulder. Takes engraving well.ba 7 3 #461-100-004AT American Walnut Tip/Grip Cap Set, tailoring for length of pull. Adds a nice final touch to Utility – 1 /8" long x 1 /16" wide. SPECS: Steel, in-the-white, satin finish. Small Matched Figure, 1F18H76 �� 20.99 recoil pad installations. ab - 1.7" (4.3cm) L x 1.23" (3.1cm) W. Medium - 1.75" (4.4cm) L x 1.27" (3.2cm) #100-003-868AT Rem Shotgun Cap, 8B8J54 ��$ 9.99 SPECS: Black polymer plastic. 2.25" (5.7cm) wide, 5.8" W. Large - 1.8" (4.5cm) L x 1.31" (3.3cm) W. #100-003-869AT Win Shotgun/M70 Rifle Cap, 8B8L54 �� 9.99 (14.8cm) long. Hole spacing: 2.6" (6.7cm) min., 3.6" (9.3cm) 1 1 1 #310-301-001AT Small Fisher Grip Cap, 1C30I27 ��$ 32.99 #100-003-870AT Win Small Rifle Cap, 8B8M32 �� 9.95 max. /8" (3.17mm), /4" (6.35mm) and /2" (12.7mm) thick. 1 #310-301-002AT Medium Fisher Grip Cap, 1C30J27 �� 32.99 #100-003-871AT Starburst European Cap, 8B8B54 �� 9.99 #440-701-180AT /8" Stock Spacer, 4D5A00 �� $ 5.59 1 #310-301-003AT Large Fisher Grip Cap, 1C30Q27 �� 32.99 #100-003-872AT Coat Of Arms Cap, 8B8Q32 �� 9.95 GALAZAN #440-701-140AT /4" Stock Spacer, 4D5A10 �� 5.59 1 #100-009-401AT Utility Cap, 8B8A54 �� 9.99 #440-701-120AT /2" Stock Spacer, 4D8K53 �� 9.99 JERRY FISHER 2-SCREW - Two-screw STOCK OVAL & SHIELD design leaves the center area open for embellishments that won’t work with single-screw caps. Counterbored N.E.C.G. holes ensure positive screw seating.ab 1 SPECS: Steel, machined from bar stock. /4" SUNNY HILL 5 25 HARD RUBBER BUTTSTOCK SPACER (6.3cm) thick. 1 /16" (3.3cm) wide. 1 /32" (4.5cm) long. In-the-white. Traditional, Jet Black; #310-300-002AT 2-Screw Grip Cap, 1C30A27 ��$ 32.99 SKELETON GRIP CAP Easy-To-Grind DRESSEL ENGLISH-STYLE - Machined from solid Provides A Hand Crafted,

Traditional, black, hard rubber stock in sizes proportioned in length, width and Custom Look To Any Rifle & g rip caps bu ttplates buttstock spacers add length to any height to look right and compliment any size Ready For Inletting & Engraving rifle or shotgun stock. Grinds beauti- rifle or shotgun. Includes screw with oversized, Traditional style, skeleton grip cap cre- fully and takes a nice polish without a tapered head.ba ates the perfect contrast between wood and Give your customers that touch of personal distinction. All-met- lot of hard work. SPECS: Machined steel, in-the-white, satin finish. Avail- metal for a professional, exhibition grade ap- al shield and ovals are pre-contoured and engrave easily. Includes 3 pearance. Outer edge is machined to form a rear pins for a secure glue or epoxy joint. ab SPECS: Hard rubber, black. 5 /4" (14.6cm) able in Large; 1.85" (4.6cm) X 1.43" (3.6cm), Standard; 1 5 1 stepped contour that provides a shadow-line SPECS: Nickel silver (NS) or 10K solid gold (SG). high, 2" (5cm) wide. Available in 6mm ( /4"), 8mm ( /16"), 12mm ( /2") and 1.78" (4.5cm) X 1.36" (3.4cm), Small; 1.71" (4.3cm) X 24mm (1") thick. 1.29" (3.2cm), Petite; 1.65" (4.1cm) X 1.22" (3.1cm). appearance. Inner edge contains a slight convex curve for faster, 1 cleaner inletting. Includes high-top screws that can be crowned or #661-100-006AT /4" Hard Rubber Spacer, 1F8I50 �� $ 8.50 #258-100-007AT Large Grip Cap, 8E30D61 �� $ 34.99 STOCK # SHAPE SIZE (WXH) FINISH PRICE fitted flush with the cap surface. ab 5 3 #661-100-008AT /16" Hard Rubber Spacer, 1F10P29 �� 10.50 #258-100-005AT Standard Grip Cap, 8E30G61 �� 34.99 SPECS: Chrwome moly, in-the-white. 1.8" (4.6cm) long x 1.3" (3.3cm) #344-130-001AT Oval /4" x 1" NS 4D23K92 $ 24.99 1 5 9 3 #661-100-012AT /2" Hard Rubber Spacer, 1F12F50 �� 12.99 #258-100-003AT Small Grip Cap, 8E30P61 �� 34.99 wide. /32" (4.1mm) thick. #344-130-002AT Shield /16" x /4" NS 4D23B92 $ 24.99 5 15 #661-100-024AT 1" Hard Rubber Spacer, 1F17H52 �� 18.75 #258-100-001AT Petite Grip Cap, 8E30K61 �� 34.99 #848-000-006AT Skeleton Grip Cap, 8D38M02 �� $ 42.00 #344-130-101AT Oval /8" x /16" SG 4D318M32 $ 334.99

order on the web

Orders/Tech: 800-741-0015 brownells.com PAGE 403 BILLINGSLY & BROWNELL PACHMAYR RECOIL PADS MANNLICHER NOSE CAP Protect Shoulders From The Heaviest Recoil; Easily Ground For Proper Fit Adding a good-quality aftermarket rubber recoil pad is an excellent way to get a significant reduction in felt recoil - and a non- Classic Accent For Mannlicher Stocks slip surface that keeps the gun butt in place on your shoulder. Long the industry standard, Pachmayr pads use specially designed The crowning touch on any Mannlicher internal ribbing to gradually absorb the kick over the course of the entire recoil impulse and protect your shoulder. They come with stock. Designed by Lenard Brownell. Made a variety of patterns on the faces, chosen to match the application and make certain your gun will mount easily and hold tightly. from top quality steel. Unpolished. Attaching Screw hole spacing and the taper of the pad’s toe vary with pad size to allow proper fitting to a wide variety of gun stocks. High- screw and nut furnished. ab grade rubber grinds/sands to shape easily for a professional fit. All models available in standard black, while others also come with SPECS: Barrel opening is .640" (16.2mm) dia. (ap- optional brown, which sometimes just looks better on certain guns. 3 proximate). Overall, .915" (23.2mm) high; .850" (21.6mm) long, /4 oz. (21 g) wt. STOCK WORK STOCK #095-004-001AT Mannlicher Nose Cap, 5K20M86 ��$ 22.99 DECELERATOR LIGHTWEIGHT

GALAZAN SC100 D750B F250 WHITE LINE FIELD FACTORY LOGO RECOIL PAD SPORTING CLAYS BLACK BASE BLACK BASE Field shape in a lightweight design. Finely checkered surfaces for fast gun handling without slipping away The Final Detail For An Accurate A 752-style pad with Decelerator material to soak up Famous Decelerator rubber plus smooth sides and ta- from shoulder. ab Restoration recoil, and a hard insert at the heel to slide smoothly over pered, internal ribbing soak up rifle recoil. Classic design SPECS: Small, 1.75" (4.5cm) x 5.10" (13cm). Medium, 1.80" clothing. ab (4.6cm) x 5.35" (13.6cm). Makes your restorations as accurate and with a solid black base (no white line). ab SPECS: Small, 1.68" (4.3cm) x 5.30" (13.5cm); Med., 1.80" SPECS: Small, 1.68" (4.3cm) x 5.30" (13.5cm); Med., 1.80" valuable as possible. These red-brown rub- (4.6cm) x 5.50" (14cm); Large, 1.92" (4.9cm) x 5.75" (14.6cm). STOCK # THICK FACE COLOR SIZE ber pads are exact reproductions of those (4.6cm) x 5.50" (14cm); Large, 1.92" (4.9cm) x 5.75" (14.6cm). .6" .8" = 20.3mm, 1" = 2.54cm. = 15.2mm, .8" = 20.3mm, 1" = 2.54cm. #690-051-157AT .85" Lined Checkrd Black Small used in the early 1900’s. The Hawkins was #690-051-158AT .85" Lined Checkrd Black Medium a commonly-used, turn of the century, af- STOCK # THICK FACE COLOR SIZE STOCK # THICK FACE COLOR SIZE termarket pad. This faithful re-creation has #690-051-168AT .85" Lined Checkrd Brown Medium #690-011-157AT .8" Leather Black Small #690-551-158AT .6" Basketweave Black Medium the original Hawkins logo in the center and — Advise # — F250 White Line Field Pad, 5K22F06 �� $ 24.99 is available with the original diamond/heart #690-011-158AT .8" Leather Black Medium #690-552-158AT .8" Basketweave Black Medium pattern vents or horizontal square vents. The #690-011-159AT .8" Leather Black Large #690-553-157AT 1" Basketweave Black Small Winchester Vented is a copy of the original pad on early 1920’s #690-011-168AT .8" Leather Brown Medium #690-553-158AT 1" Basketweave Black Medium Winchesters that includes the Winchester logo, with the legend 752B #690-012-157AT 1" Leather Black Small #690-553-159AT 1" Basketweave Black Large “MADE IN U.S.A.” above the logo and “TRADE MARK PAT. JUNE 6, #690-012-158AT 1" Leather Black Medium DECELERATOR YOUTH pads recoil 1922” correctly placed below it. Winchester Solid is a solid red pad — Advise # — D750B Decelerator Pad, 5K32D24 �� $ 34.99 modeled after that of many original pre-’64 Winchesters including #690-012-159AT 1" Leather Black Large Smaller Size Looks Correct On Petite Rifles #690-012-167AT 1" Leather Brown Small the Model 70, Model 12, Model 21, plus all lever action and pump Decelerator® pad that’s smaller in all dimensions to models. Raised lettering Winchester logo. Early Noshoc pad pro- #690-012-168AT 1" Leather Brown Medium look and fit right on youth or smaller rifles and shotguns. vides an opportunity to put the correct era pad on many high-grade D752 — Advise # — SC100 Black Base Pad, 5K39I10 �� $ 43.99 Tighter hole spacing makes installation easier with less American guns. Used by Parker, Fox, L.C. Smith, Remington, Win- chance of stock damage. ab chester, and Lefever. Raised lettering reads “NOSHOC” with the leg- OLD ENGLISH BLACK BASE SPECS: 1.68" (4.3cm) wide, 5.30" (13.5cm) high, 1" (2.5cm) thick, 2.50" end “PATENTED JUNE 6, 1922” above the logo and “MADE IN U.S.A” Classic, smooth-sided pad made from famous Decel- (6.35cm) c-to-c hole spacing. below it. The Universal pad comes in red and works well on a variety 1 D200B/D500B erator rubber. Features tapered, internal ribbing. Solid base, #690-110-752AT 752B Decelerator Youth Pad, of custom stocks. Screw holes are 3 /4" apart; midway between these 3 1 no white line. ab 5K31E60 �� $ 34.99 holes is an internal cavity /4" wide and 2 /8" long. ULTRA-LIGHT FIELD PAD SPECS: Small, 1.68" (4.3cm) x 5.30" (13.5cm); Med., 1.80" SPECS: Rubber. Red pad with black base. Hawkins - 5.9375" long x 1.9375" (4.6cm) x 5.50" (14cm); Large, 1.92" (4.9cm) x 5.75" (14.6cm). .6" wide, 1" deep, 3.25" center-to-center hole spacing. Noshoc - 5.344" long BLACK BASE = 15.2mm, .8" = 20.3mm, 1" = 2.54cm. x 1.75" wide, .9" deep, 3.020" c-to-c hole spacing. Winchester Vented TRAP T550 WHITE LINE - 4.75" long x 1.6875", 1" deep, 3.0625" c-to-c hole spacing. Winchester Ultra low-profile pad designed for rimfire and other STOCK # THICK FACE COLOR SIZE Solid - 5.5" long x 1.875" wide, .875" deep, 3.125" c-to-c hole spacing. low-recoil guns ensures fast, yet secure shouldering Trap shooting requires a different shape in a recoil pad 1 3 #690-541-157AT .6" Leather Black Small for accurate, repeated, shoulder positioning and maxi- Universal - 5.5" long x 1.9" wide, /2" (1.3cm) or /4" (1.9cm) deep, 3.25" in the field. Gently concave face helps prevent shoul- (8.2cm) c-to-c hole spacing. dered rifle from slipping. Made of black Decelerator rub- #690-541-158AT .6" Leather Black Medium mum recoil reduction. First choice of Trap Champions everywhere. ab #344-000-010AT Hawkins Recoil Pad, Diamond Vent, ber with solid black base, no white line. Available with #690-541-159AT .6" Leather Black Large SPECS: Medium, 1.95" (4.9cm) x 5.35" (13.6cm) x 1.1" thick. Black, 4D24P62 �� $ 29.99 Stippled or Basketweave pattern molded into face. ab #690-541-168AT .6" Leather Brown Medium SPECS: Two (2) mounting screws included. D200B Stippled with leather face. #344-000-012AT Noshoc Recoil Pad, 4D24I62 �� 29.99 #690-542-157AT .8" Leather Black Small – 1.95" (4.9cm) x 5.40" (13.7cm) x .50" (1.3cm). D500B Bas- #690-211-258AT T550 Trap Pad, 5K27M74 �� $ 30.99 #344-000-014AT Winchester Recoil Pad, Vented, ketweave – 1.80" (4.6cm) x 5.50" (14cm) x .50" (1.3cm). #690-542-158AT .8" Leather Black Medium 4D33C14 �� 39.99 #690-542-159AT .8" Leather Black Large #978-100-001AT Winchester Recoil Pad, Solid, STOCK # THICK FACE COLOR MODEL #690-542-168AT .8" Leather Brown Medium PRE-FIT 4D40H06 �� 40.99 #692-000-020AT .5" Stippled Black D200B #690-543-157AT 1" Leather Black Small 1 ® #344-000-013AT Universal Recoil Pad, /2" Red, #692-000-021AT .5" Basketweave Black D500B #690-543-158AT 1" Leather Black Medium Decelerator Pads, Pre-Contoured For Popular Stocks 4D15L99 �� 15.99 — Advise # — D200B/D500B Decelerator Ultra-Light #690-543-159AT 1" Leather Black Large Unscrew a factory buttplate or pad and screw on Pach- 3 #344-000-016AT Universal Recoil Pad, /4" Red, Pad, 5K13H39 �� $ 14.99 #690-543-167AT 1" Leather Brown Small mayr’s premier model - with no gunsmithing! The hole spac- 4D17N52 �� 19.99 ing usually matches and, where needed, rifle models include #690-543-168AT 1" Leather Brown Medium an adapter/spacer to make mounting easier. The exterior #690-543-169AT 1" Leather Brown Large shape is ground and finished to within .050" of the stock. All D550 #690-000-015AT 1" Leather Red Medium have solid sides and a black base. Rifle pads feature a basketweave KICK-EEZ JR. MODEL RECOIL PAD face so the gun stays on your shoulder. Shotgun pads are Old English- BLACK BASE TRAP — Advise # — D752 Black Base Old English Pad, style with a leather grained face for quick shouldering. ab 5K32N24 ��$ 34.99 Smaller Size Plus Greater Comfort Recoil-absorbing, smooth-sided trap pad with SPECS: Black Decelerator rubber, black base. Designed to fit current production models that were fitted at the factory with an O.E.M. recoil Sorbothane® rubber gives smaller shooters freedom solid black base, no white line. ab pad. 1" (2.5cm) thick. from sore shoulders and pain. Junior size compliments SPECS: Medium, 1.95" (4.9cm) x 5.35" (13.6cm); Large, 2.05" and installs more easily on youth or smaller rifles and (5.2cm) x 5.70" (14.5cm). 1.1" = 2.8cm. STK# Fits shotguns, and stocks that have been shortened. Black STOCK # THICK FACE COLOR SIZE Pachmayr Recoil Pads #690-000-017AT Marlin 336 wood stock base with leather grain textured face. ab #690-521-158AT 1.1" Pigeon Black Med #690-000-004AT Marlin 1895 Guide Gun, 444P, 1894 Ported SPECS: Black. 1.75" (4.4cm) x 4.75" (12cm) x 1" (2.54cm), 2.75" (7cm) cen- Continue ter-to-center hole spacing. #690-521-159AT 1.1" Pigeon Black Lrg #690-601-712AT Rem. 700 ADL/BDL wood stock, curved #440-300-101AT Jr. Recoil Pad, 4D30H19 �� $ 34.99 — Advise # — D550 Black Base Trap Pad, 5K39C86 �� $ 43.99 On The Next Page — Advise # — Pre-Fit Recoil Pad, 5K33G53 �� $ 36.99

SATISFACTION GUARANTEED bu ttplates & g rip caps PAGE 404 SINCE 1939 Office/Tech: 641-623-5401 PACHMAYR RECOIL PADS CONTINUED KICK-EEZ RECOIL PAD Soft, Genuine Sorbothane® DELUXE OLD ENGLISH MAGNUM STOCK WORK

F325 752B F990 DELUXE WHITE LINE FIELD BLACK BASE WHITE LINE FIELD Extremely elegant pads for fine guns. Same internal A favorite design for fast action shooting. Shape, con- Extra thick, extra soft, “Triple Magnum” design. configuration as Presentation pad. Smooth sides, rounded struction and hardness make this pad ideal for shotguns Recoil is distributed over entire pad. Tapered ribbing, edges. Solid black base, no white line. ab or large caliber rifles. ab layered core, with non-bending inserts that prevent SPECS: Small, 1.68" (4.3cm) x 5.30" (13.5cm); Medium, 1.80" SPECS: Small, 1.80" (4.6cm) x 5.15" (13.1cm). Medium, 1.90" unwanted downward movement. Field-style for easier (4.6cm) x 5.50" (14cm); Large, 1.92" (4.9cm) x 5.75" (14.6cm). .6" (4.8cm) x 5.40" (13.7cm). 1" = 2.54cm, 1.1" = 2.79cm. shouldering. ab = 15.2mm, .8" = 20.3mm, 1" = 2.54cm. SPECS: Small, 1.80" (4.6cm) x 5.15" (13.1cm); Med, 1.90" 300 Series 400 Series 200 Series 300 Series 500 Series (4.8cm) x 5.40" 13.7cm); Large, 2.05" (5.2cm) x 5.70" Dual Action Dual Action STOCK # THICK FACE COLOR SIZE STOCK # THICK FACE COLOR SIZE (14.5cm). 1.50" = 3.8cm. #690-111-157AT 1" Stipple Black Small #690-311-157AT .6" Leather Black Small These pads don’t just slow recoil down, they actually cut the kick #690-112-158AT 1.1" Stipple Black Medium #690-311-158AT .6" Leather Black Medium STOCK # THICK FACE COLOR SIZE dramatically by absorbing it! Made from soft, springy, Sorbothane, they end next-day-hurt, tame large caliber flinch and allow recoil- #690-111-167AT 1" Stipple Brown Small #690-312-158AT .8" Leather Black Medium #690-371-257AT 1.50" Leather Black Small sensitive shooters to shoot in comfort. Won’t ever bottom out. Grind #690-112-168AT 1.1" Stipple Brown Medium #690-371-258AT 1.50" Leather Black Med #690-312-168AT .8" Leather Brown Medium and shape like regular pads, just don’t allow heat to build up. 200 — Advise # — F325 White Line Fld Pad, 5K24E42 �� $ 26.99 #690-313-157AT 1" Leather Black Small — Advise # — F990 White Line Field, 5K63F11 ��$ 69.99 Series Dual Action Sporting Clays pad has two layers of Sorbo- #690-313-158AT 1" Leather Black Medium thane for extra protection. The first layer reacts quickly to absorb initial recoil, while the second layer dissipates the remaining energy #690-313-159AT 1" Leather Black Large recoil pads to maximize absorption. Heel is canted approximately 45° for easy #690-313-168AT 1" Leather Brown Medium WANT MORE NEW STUFF? F325B shouldering from the “low gun” position. 300 Series All Purpose — Advise # — 752B Black Base Pad, 5K24F42 ��$ 26.99 Visit our website for daily updates! has a slightly concave face designed for all shooting applications. DELUXE BLACK BASE FIELD 300 Series Dual Action All Purpose pad combines the two-layer absorption properties of the 200 Series Dual Action pads with a flat A favorite design for fast shooting. Shape, construc- back and downward-canted ends for easy shouldering in a wide va- tion and hardness make it ideal for shotguns or large RIFLE riety shooting applications. 400 Series Trap has a more pronounced caliber rifles. ab concave face than 300 Series for fixed-position trapshooting. 500 SPECS: Small, 1.80" (4.6cm) x 5.15" (13.1cm). Medium, 1.90" RP200 500B Series Magnum is designed for heavy recoiling guns and has a flat (4.8cm) x 5.40" (13.7cm). Large, 2.05" (5.2cm) x 5.70" (14.5cm). face and downward canted ends for easy shouldering. All pads fea- 1" = 2.54cm, 1.1" (2.79cm), 1.15" (2.92cm). BLACK BASE BLACK BASE ture solid sides, a black base, and leather-grain textured face. ab SPECS: Sorbothane® visco-elastic polymer. Large - 2.03" (5.1cm) x 5.65" Basketweave rifle pad for the finest custom jobs. STOCK # THICK FACE COLOR SIZE Stippled face grips clothing, prevents rifle movement (14.3cm). Medium - 1.93" (4.9cm) x 5.33" (13.5cm). DA = Dual Action. Solid color base preferred by many. ab during recoil. Solid color base preferred by many. ab Dimensions shown in chart are nominal and can vary due to ambient #690-121-157AT 1" Stipple Black Small SPECS: Small, 1.68" (4.3cm) x 5.30" (13.5cm); Medium, SPECS: Med, 1.85" (4.7cm) x 5.40" (13.7cm). .5" = 12.7mm. temperature and humidity conditions present at the time of manufacture. #690-121-158AT 1.1" Stipple Black Medium 1.80" (4.6cm) x 5.50" (14cm); Large, 1.92" (4.9cm) x 5.75" #690-121-159AT 1.15" Stipple Black Large (14.6cm). .4" = 10.2mm. STOCK # THICK FACE COLOR SIZE STOCK # MODEL SIZE THICK COLOR #690-121-167AT 1" Stipple Brown Small STOCK # THICK FACE COLOR SIZE 15 #690-032-158AT .5" Stipple Black Med #440-000-050AT DA-201-8-L-B Large /16" (2.4cm) Black #690-121-168AT 1.1" Stipple Brown Medium #690-191-157AT .4" Basketweave Black Small 1 #690-032-168AT .5" Stipple Brown Med #440-000-051AT DA-201-10-L-B Large 1 /8" (2.9cm) Black #690-121-169AT 1.15" Stipple Brown Large #690-191-158AT .4" Basketweave Black Medium 15 — Advise # — RP200 Black Base Pad, 5K19P71 ��$ 21.99 #440-000-052AT DA-202-8-M-B Med. /16" (2.4cm) Black — Advise # — F325B Blk Face Field Pad, 5K24A42 �� $ 26.99 #690-191-159AT .4" Basketweave Black Large 1 #440-000-053AT DA-202-10-M-B Med. 1 /8" (2.9cm) Black #690-191-168AT .4" Basketweave Brown Medium 1 #440-000-025AT 301-5-L-B Large /2" (1.3cm) Black 3 — Advise # — 500B Black Base Pad, 5K19D71 ��$ 21.99 #440-301-106AT 301-6-L-B Large /4" (1.9cm) Black 15 S325 RP250 #440-301-108AT 301-8-L-B Large /16" (2.4cm) Black 1 #440-301-110AT 301-10-L-B Large 1 /8" (2.9cm) Black 15 DELUXE WHITE LINE SKEET BLACK BASE RP200 #440-000-054AT DA-301-8-L-B Large /16" (2.4cm) Black 1 This design is based on exhaustive testing by top Flat face with “downward slanting” horizontal grooves #440-000-055AT DA-301-10-L-B Large 1 /8" (2.9cm) Black WHITE LINE 3 skeet shooters and professionals. A medium-sized page comes to shoulder easily without drag. ab #440-302-106AT 302-6-M-B Med. /4" (1.9cm) Black 15 with a superior shape that has the right “feel” so neces- SPECS: Medium, 1.90" (4.8cm) x 5.55" (14.1cm). .5" = 12.7mm. #440-302-108AT 302-8-M-B Med. /16" (2.4cm) Black Stippled face grips clothing, prevents rifle movement sary for both shooter comfort and fast gun handling. ab 1 STOCK # THICK FACE COLOR SIZE during recoil. Contrasting white line. ab #440-302-110AT 302-10-M-B Med. 1 /8" (2.9cm) Black SPECS: Medium, 1.90" (4.8cm) x 5.40" (13.7cm) x 1" thick. 15 #440-000-056AT DA-302-8-M-B Med. /16" (2.4cm) Black Black, with ribbed face. #690-091-158AT .5" Grooved Black Medium SPECS: Medium, 1.85" (4.7cm) x 5.40" (13.7cm). x .5" (12.7mm) 1 thick. Black, stippled face. #440-000-057AT DA-302-10-M-B Med. 1 /8" (2.9cm) Black #690-132-158AT S325 White Line Skeet Pad, — Advise # — RP250 Black Base Pad, 3 5K24F42 �� $ 26.99 5K19D71 �� $ 21.99 #690-031-168AT RP200 White Line Pad, #440-401-106AT 401-6-L-B Large /4" (1.9cm) Black 15 5K19K71 ��$ 21.99 #440-401-108AT 401-8-L-B Large /16" (2.4cm) Black 1 #440-401-110AT 401-10-L-B Large 1 /8" (2.9cm) Black 3 #440-402-106AT 402-6-M-B Med. /4" (1.9cm) Black 15 #440-402-108AT 402-8-M-B Med. /16" (2.4cm) Black PACHMAYR XLT MAGNUM ULTRA-SOFT TRAP PAD 1 Go to the learn tab at #440-402-110AT 402-10-M-B Med. 1 /8" (2.9cm) Black 3 www.brownells.com Super Soft Pads For Longer Shooting Sessions #440-000-044AT 403-6-L-B Large /4" (1.9cm) Black 15 #440-000-045AT 403-8-L-B Large /16" (2.4cm) Black to view videos and 50% softer than the Decelerator™ pad with smooth grinding and fitting characteristics that make this pad easy to install 3 #440-501-112AT 501-125-L-B Large 1 /8" (3.5cm) Black while giving your favorite trap gun classy good looks and providing you with superior comfort. Leather-style face provides read articles on 3 a grippy surface to keep the gun firmly seated on your shoulder. Won’t go “flat” after years of shooting and vertical storage. #440-502-112AT 502-125-M-B Med. 1 /8" (3.5cm) Black your gun. Available in Medium and Large. ab — Advise # — 200/300 Kick-Eez Recoil Pad, SPECS: Black, rubber. Med., 1.95" (4.9cm) x 5.35 (13.6cm). 1.1" (2.8cm) thick. Large, 2.05" (5.2cm) x 5.70" (14.5cm). 1.2" (3.1cm) thick. 4D31D26 �� $ 34.99 #690-000-020AT XLT Trap Pad, Medium, 5K40H61 �� $ 44.99 — Advise # — 400 Kick-Eez Recoil Pad, 4D31J00 �� 34.99 #690-000-021AT XLT Trap Pad, Large, 5K37G99 �� 37.99 — Advise # — 500 Kick-Eez Recoil Pad, 4D31M00 �� 34.99

order on the web

Orders/Tech: 800-741-0015 brownells.com PAGE 405 KICK-EEZ PRE-FIT RECOIL PADS HOGUE MASEN SEMI-AUTO RIFLE SIMS VIBRATION LABORATORY ® Recoil-Absorbing Pads; Easy Drop-In Installation EZG™ GRIND-TO-FIT RECOIL PADS RUBBER RECOIL PAD LIMBSAVER GRIND-TO-FIT SPEED Drop-in replacement buttpad with outstanding Neoprene Elastomer Cushions Painful Recoil - Extra-Length Plus No-Slip Surface MOUNT RECOIL PAD recoil absorption properties reduces felt recoil by, Grinds Cleanly and minimizes flinch for fast, accurate follow up shots Increases stock length to better fit Cushions Felt Recoil, Reduces Muzzle Jump; and no “day after” shoulder pain. These pads are pre- Ultra-soft, space-age, polymerized, synthetic shooters with long arms. Provides a cush- No-Snag Design For Fast Shouldering shaped to fit the factory stock contours and screw rubber pad cushions painful recoil and saves your ioned, recoil absorbing, non-slip surface. spacing, so there’s no grinding, fitting, or drilling. Just shoulder. Customizable - these pads grind cleanly; Replaces original pad with no permanent Recoil-absorbing pad of NAVCOM™ synthetic ma- remove the current buttpad and replace with a Kick- alterations. AR-15/M16 model fits A1 and oversized for the perfect fit on your rifle or shotgun. 3 terial combines the proven effectiveness of the original Eez. Made of Sorbothane®, a unique visco-elastic Polymer base plate flexes slightly to resist cracking A2 trap door buttstocks; adds /4" length. Limbsaver with improved shouldering speed and Anti- polymer that disperses recoil energy outward, away and to fit less-than-perfect stocks. CAR-15 model fits M4-style collapsible Muzzle Jump Technology for fast, accurate follow up STOCK WORK STOCK from the shooter’s shoulder, without distorting or bottoming out. stock; adds 3⁄4". M14/M1A adds 7⁄8". M1 SPECS: Small - 5.3" (13.46cm) tall, 1.68" (4.27cm) wide, ® shots. Beveled heel eliminates the prominent edge that Retains its 100% memory even after thousands of shots. ab 1" (2.54cm) thick. Medium - 5.5" (14cm) tall, 1.8" (4.6 Garand model adds 7⁄8". Ruger model can catch on clothing and slow down shouldering your 3 ® ® SPECS: Sorbothane synthetic rubber, black. Approximately 1 /16" (3cm) fits 10/22 , Mini-14 with serial number beginning “580-” and high- cm) wide, 1" (2.54 cm) thick. Large - 5.7" (14.79cm) tall, ® 1 shotgun. Wear-resistant Easy Glide surface coating thick. Includes (2) mounting screws and installation instructions.* Butt- 2" (5.08cm) wide, 1" 2.54 cm) thick. Includes (2) screws. er, Mini-Thirty , and Model 96™; adds 1 /8". ab further reduces friction between pad and clothing. As pad height measured from heel to toe. Gunsmith fitting required. SPECS: Polyethylene rubber, black. Serrated face. the firearm discharges, the redesigned two-chamber #560-153-700AT AR-15/M16 Recoil Pad, 6E12D95 ��$ 13.99 system inside the pad engages, with the lower chamber compress- STOCK # FITS GUN/STOCK TYPE STK# BLACK STK# BROWN Size #560-153-800AT CAR-15 Recoil Pad, 6E12I00 �� 12.99 ing first to direct the recoil force downward. Two, internal impact 3 #440-000-030AT Beretta, all 5 /8"* wood/synthetic; Baikal, wood; pillars engage to distribute the force and further control the angle #408-000-047AT NA Small #560-153-808AT M14/M1A Recoil Pad, 6E14M45 �� 14.99 Stoeger, wood (some models) #560-153-807AT Ruger Recoil Pad, 6E15B33 �� 15.99 of collapse, reducing muzzle jump by as much as 50%. Grind-to-fit #408-000-048AT #408-000-051AT Medium for custom installations. ab #440-000-029AT Marlin 336/444/450/512; Mossberg 500 AG #408-000-049AT NA Large SPECS: NAVCOM™ synthetic material, black, with black plastic base. Turkey/9200/9300, wood; Rem 870 Wingmaster 1 5 5.085" x 1.815, grinds to approximately 4 /4" x 1 /16 . 3.125" center-to-center (non-Express)/870 Police/11-87 SP (1992 only), — Advise # — EZG Grind Recoil Pads, 8K22L99 ��$ 22.99 hole spacing. wood; Weatherby Vanguard; Winchester 70 SIMS VIBRATION LABORATORY #902-000-098AT Grind-To-Fit Speed Mount Pad, Carbine (.30-06)/Mod 100, wood 7K32L07 �� $ 37.99 ® — Advise # — Pre-Fit Recoil Pad, 4D29C87 �� $ 34.99 LIMBSAVER GRIND-TO-FIT PADS KICK-EEZ Advanced Technology Displaces Recoil; Gives You A Custom-Fit Recoil Pad SPECIAL PURPOSE RECOIL PAD SIMS VIBRATION LABORATORY KICK-EEZ ROCKER RECOIL PAD Space-age, NAVCOM™ polymer, grind-to-fit ® Soft Sorbothane® For pads recoil recoil pad reduces bruising and recoil pain on your LIMBSAVER RECOIL PAD Comes Quickly To Your Shoulder With Difficult-To-Fit Stocks shoulder. Grinds easily using a coarse belt for a perfect- Consistent Comfort & Fit fitting recoil pad. Advanced Simms technology spreads Pre-Fit Pads That Take The Hurt Out Of Rifle & Solid pad with adjustable recoil throughout the entire pad for even recoil dis- Shotgun Shooting Shock-absorbing Sorbothane® really soaks up hole spacing for easier fitting to placement. Available in Small, Medium, and Large. ab recoil. Features a tapered toe for a snug fit that does those “hollow” stocks on Brown- SPECS: Navcom polymer, black. 1" (2.54cm) thick. Small - Energy absorbing, NAVCOM™ material com- not dig into your shoulder. The heel features a round 13 27 7 ing Gold, Beretta 390 and Benelli 4 /16 " (12.2cm) long, 1 /32" (4.7cm) wide; grindable to 3 /8" (10cm) long, bined with dual, airtight chambers and elastic motion contour that lets you bring the gun up fast and easy, 11 3 13 shotguns. Soft, Sorbothane dra- 1 /32" (3.4cm) wide. Medium - 5 /32" (13cm) long, 1 /16" (4.6cm) wide; grind- to reduce recoil-induced shock up to 50% over fac- without grabbing your clothes. Provides repeatable, 1 5 9 1 matically absorbs recoil energy. ab able to 4 /4" (11cm) long, 1 /16" (3.3cm) wide. Large - 5 /16" (14cm) long, 2 /16" tory pads. Gives greater protection for the shooter; consistent gun mounting for greater comfort and ac- 1 7 19 SPECS: Sorbothane. Black. Flat leather face. 2 /4" (5.7cm) W, 6" (15cm) (5.2cm) wide; grindable to 4 /16" (11.3cm) long, 1 /32" (4cm) wide. allows more shooting, without soreness and discom- curacy. Attractive, leather face. ab 15 5 long, /16" (24mm) thick. Includes screws. fort at the end of a long shooting day. Plus, proprietary SPECS: Includes screws. 2" (5cm) x 5 /8" (14.3cm). Thick - Anti-Muzzle Jump Technology helps distribute shock 1.2" (3cm); Thin - .940" (2.4cm) maximum thickness. #440-801-001AT Special Purpose Pad, 4D31P00 �� $ 34.99 #902-000-072AT Limbsaver Grind-To-Fit, Small, 7K36F19 �� $ 37.99 to reduce muzzle rise for faster, more accurate follow #440-000-023AT Thick Rocker Recoil Pad, 4D30M19 �� $ 34.99 up shots. Pre-fit pads; check price line to see if pad fits #440-000-024AT Thin Rocker Recoil Pad, 4D30Q19 �� 34.99 #902-000-073AT Limbsaver Grind-To-Fit, Medium, wood or synthetic stock. ab 7K36B19 �� 37.99 SPECS: NAVCOM synthetic material. Black with black #902-000-074AT Limbsaver Grind-To-Fit, Large, base. Ribbed face. Screw-on replacement requires no fitting for guns REMINGTON 700/870 7K36N19 �� 37.99 with factory recoil pad. Benelli fits 12 gauge, including wood and syn- KICK-EEZ thetic stocked M1, Sport, and Super Black Eagle, and synthetic stocked SUPERCELL™ RECOIL PAD Super Black Eagle II, and wood stocked M2 and Montefeltro. Ruger fits SPORTING CLAYS RECOIL PAD recessed Ruger synthetic stocks, plus Sako 75 and Tikka T-3 Lite synthetic Get 54% Less Felt Recoil For stocks. Browning Gold also fits Ruger 77 and #1. Mossberg 500/835 fits Sorbothane® Absorbs Recoil, All Day Shooting Comfort SIMS VIBRATION LABORATORY post-1999 manufactured guns. ® Plus Altered Design Is Easier To Shoulder Manufactured by Remington, the advanced Su- LIMBSAVER SLIP-ON RECOIL PAD STOCK # FITS PRICE Functional, diagonal cut at the heel won’t catch percell pad provides an amazing 54% reduction in on clothing so it’s easier and faster to shoulder when felt recoil over the standard factory pad. Helps pre- Quick, Easy Solution To Painful Recoil #902-000-021AT Benelli 7K32A08 $ 37.99 3 you’re shooting your favorite sporting clays course. vent flinching for quick, accurate follow up shots, and #902-000-075AT Beretta 5 /8" stocks, all 7K32G08 $ 37.99 Made from exclusive Sorbothane material that’s soft ensures all-day shooting comfort. Lightweight, ad- Slip-on recoil pad installs with ease to displace #902-000-076AT Beretta 5" stocks, all 7K32E08 $ 37.99 vanced polymer construction won’t change the bal- painful shock and recoil. Transfers easily from gun and springy to soak up recoil force and prevent sore, #902-000-064AT Brn. Gold Auto, wood 7K32H08 $ 37.99 ance of your Model 700 ADL/BDL rifle or 870 shotgun. Easy, drop-in to gun and requires absolutely no fitting. Made with next-day shoulder. Can be ground and fit just like con- #902-000-022AT Moss. 835/500, synthetic 7K32J08 $ 37.99 ventional rubber pads. ab installation. Models to fit synthetic and wood stocked guns. ab proprietary NAVCOM™ material for a soft feel and SPECS: Leather face. Includes screws. Large - 2.03" (5.1cm) SPECS: Advanced polymer, black. Synthetic - Fits factory synthetic stock. recoil absorbance. ab #902-000-060AT Rem. 870, wood 7K32C08 $ 37.99 15 1 /16" (2.7cm) thick. Wood - Fits factory wood stock. 1 /16" (2.7cm) thick. SPECS: NAVCOM synthetic material, black. Available in #902-000-062AT Rem. 700 BDL, wood 7K32M08 $ 37.99 x 5.75" (14.6cm). All dimensions are nominal. Medium -1.93" 5 700 - Fits Model 700 ADL/BDL rifles. Includes mounting screws. 870 - small, medium, and large. Small - Approximately 4 /8" (4.9cm) x 5.33" (13.5cm). 1 #902-000-063AT Rem. 700 ADL, wood 7K32N08 $ 37.99 Fits Remington 870 shotguns, 20/12 gauge. Requires original mounting (11.7cm) up to 5" (13cm) high, 1 /2" (3.8cm) wide. Small/ 5 1 #902-000-097AT Rem. 700/870/1100/12 ga. 7K32F08 $ 37.99 STOCK # MODEL SIZE THICK COLOR screws. Medium - approximately 4 /8" (11.7cm) up to 5 /8" (13cm) 3 1 #768-194-840AT Rem 700 Supercell Recoil Pad, high, 1 /4" (4.5cm) wide. Medium - 5" (13cm) up to 5 /4" (13.3cm) high, 11-87, synthetic #440-201-110AT 201-10-L-B Large 1.1" (3cm) Black 5 1 1 3 1 /8" (4.1cm) wide. Large - 5 /4" up to 5 /2" (14cm) high, 1 /4" (4.4cm) wide. #100-002-236AT Ruger (recessed stock)/Sako 7K32H08 $ 37.99 #440-201-108AT 201-8-L-B Large 1.0" (2.5cm) Black Synthetic, 8F18E21 �� $ 19.99 #902-000-079AT Small Slip-On Recoil Pad, 7K29C63 �� $ 34.99 75/Tikka T-3 Lite, synthetic #440-201-106AT 201-6-L-B Large .8" (20.3mm) Black #768-194-830AT Rem 700 Supercell Recoil Pad, Wood, 8F18P21 �� 19.99 #100-002-653AT Small/Medium Slip-On Recoil Pad, #902-000-077AT Savage 110, Wood 7K32B08 $ 37.99 #440-202-110AT 202-10-M-B Med. 1.1" (3cm) Black #767-000-918AT Rem 870 Supercell Recoil Pad, 7K21M65 �� 24.99 #440-202-108AT 202-8-M-B Med. 1.0" (2.5cm) Black Synthetic, 7F25K46 �� 26.99 #902-000-080AT Medium Slip-On Recoil Pad, #440-202-106AT 202-6-M-B Med. .8" (20.3mm) Black #767-000-919AT Rem 870 Supercell Recoil Pad, 7K29I63 �� 34.99 — Advise # — Kick-Eez Sprtng Clay Pad, 4D30L19 �� $ 34.99 Wood, 7F25N71 �� 27.99 #902-000-081AT Large Slip-On Recoil Pad, 7K29G63 �� 34.99 Selection • Service • Satisfaction

SATISFACTION GUARANTEED

PAGE 406 SINCE 1939 Office/Tech: 641-623-5401 PACHMAYR RECOIL-LESS ENGINEERING GUN NUT II CSP SPEEDLOCK ® DECELERATOR SPEED-MOUNT Customize Your Gun’s ADJUSTABLE STOCK HARDWARE ADJUSTABLE BUTT PLATE Length Makes Rifle & Shotgun Combs Fully Adjustable SLIP-ON RECOIL PAD Designed & Used By National High- STOCK WORK Unique, buttstock an- Power Champion, David Tubb Fits Many Different Guns For Inexpensive chor lets you quickly adjust Easy-to-install hardware, in two Recoil Protection kit styles, makes any wood stock stock length by adding, re- Gives full, four-way (length of pull, moving, or switching spac- fully adjustable for comb height Slip-on recoil pad with rounded heel sec- drop at heel, height at comb and angle ers and recoil pads. Steel- and cast. Locking set screws secure tion of slick polymer helps limit friction so rifle of stock) adjustment to any rifle or to-steel thread attachment adjustments. Comb hardware is or shotgun slides smoothly to your shoulder. interchangeable between kits. Ad- shotgun with just a quick turn of the keeps pad from coming wrench. Fully-ground, beautifully- Heel section is specially contoured to avoid 1 justable Disk Kit - features separate loose. Requires drilling /4" shaped fixture is ready to install and use. clothing snag and allow quick shouldering. 1 x 1 /4" holes in the buttstock bases that are inlaid into the stock Decelerator pad face provides great recoil Includes black Pachmayr Presentation for the screw anchor. Spacers and recoil pads not included. ab and comb. Adjustable Plate Kit - has cushioning and stretchable side material flexes pad. ab SPECS: (2) Steel anchors, in-the-white. Approximately 1" (2.54cm) long. (2) a one-piece base that is inlet into the to allow easy installation, while providing plenty of grip to hold pad stock and the insert bases for the comb. Brass only. ab SPECS: Aluminum plates, black, rubber, 15 steel, panhead screws. Approximately 1" (2.54cm) long. 3 3 firmly on stock. Adds /16" to length of pull. SPECS: Machined 360 brass or stainless steel. Gives .168" (4.28mm) cast recoil pad. 2" (5cm) wide, 5 /8" (13cm) long, 3 /8" center-to-center hole 7 #763-000-001AT Gun Nut II, 3F15M77 �� $ 17.99 3 3 SPECS: Decelerator rubber, black or brown. Small - 4 /8" (12.4cm) long x and .50" (12.7mm) height adjustment. Includes bases, sleeves, set screws, spacing Adjustment Limits - + 1 /4" (4.4cm) length of pull, - /4" (19mm) 5 3 1 /8" (4.1cm) wide. Medium - 5" (12.7cm) long x 1 /4" (4.4cm) wide. drop at heel, + 3" (7.6cm) height at comb. 180° rotation of angle of stock. Allen wrenches, comb pattern and instructions. Requires permanent al- 1 #692-000-015AT Small Speed-Mount Slip-On Pad, terations to the stock. 1 /2 lb. (594 g) wt. Includes mounting screws. #840-500-001AT Adjustable Butt Plate, 4H135J43 �� $ 150.99 Brown, 5K23G86 �� $ 25.99 #365-102-000AT Brass Adjustable Disk Hardware Kit, #692-000-012AT Small Speed-Mount Slip-On Pad, GRACO 5F74B68 �� $ 77.99 Black, 5K23H62 �� 24.99 #365-102-100AT SS Adjustable Disk Hardware Kit, #692-000-016AT Medium Speed-Mount Slip-On Pad, ADJUSTABLE BUTT PLATE 5F79B31 �� 81.99 Brown, 5K23J62 �� 24.99 Adjusts For Length, Drop and Rotation #365-104-000AT Brass Adjustable Plate Hardware Kit,

5F75C99 �� 75.99 recoil pads Three-way adjustments for perfect gun fit, MORGAN higher scores and improved shooting comfort. ADJUSTABLE RECOIL PAD Base plate mounts to gun, your pad mounts to pad TAPCO CAR-15/M4 1 plate and the threaded tube provides a total of 1 /8" Customized Fit T6/M4 RECOIL PAD in/out adjustment. Make full turns or stop the ro- For More Comfortable, tation anywhere in 360° and lock with the socket JONES 1 More Accurate Shooting Increase Shooting Comfort & Length-Of-Pull head set screws. Slotted top plate allows 1 /2" vertical adjustment. Slide a Breako recoil reducer (listed elsewhere) into the tube for a STOCK ADJUSTER Get increased shooting comfort No permanent alterations necessary to your M4 neat, compact installation. Combine with Graco’s Adjustable Comb and increased accuracy with the or Tapco T6 collapsible stock to add increased shoot- Hardware (listed elsewhere) to make your own “Try Stock”. ab Fast, Hassle-Free Stock Adjustments original, adjustable pad. Separate, ABS 1 ing comfort, lower felt recoil, plus an additional /2" to 13 SPECS: Matte finished aluminum. 5 /16" (14.7cm) long x 2" (5cm) wide x To Match Any Shooting Style plastic plate with movable, foam core 9 1 the length-of-pull. Rubber pad slips easily over the /16" (14.3mm) thick (adjusted fully “in”). Base plate attaching holes are 3 /4" pad makes your buttstock quickly plastic buttplate; held in position by rubber tabs and (82.5mm) center-to-center. Standard Model for pumps, over/unders and Give greater versatility to your shotgun and easily adjustable for stock pitch, a friction collar. Won’t shoot loose, stays put until it’s side-by-sides has threaded tube centered between attaching holes. Auto or rifle with up to 1" vertical drop, 22° left drop and degree of recoil absorp- removed. Great accessory for competitive shoot- 1 5 Model for Remington 1100, 11-87, Beretta 302/303 etc., positions tube /2" or right tilt, and /16" horizontal offset of the Curved Straight tion, so your gun fits and feels the ers; raised, non-slip surface helps keep your rifle or shotgun on- (12.7mm) closer to top attaching hole to clear action spring tubes. Both recoil pad or buttstock position. Ultra-thin, way it should. Available with either a shoulder during long shooting strings or moving courses of fire. ab 1 1 require drilling 1 /8" (28.6mm) hole in stock. 4 smooth-face, curved, trap-style pad or a straight, checkered-face, 1 multi-position stock plates add only / ", yet SPECS: Rubber, black. Adds /2" (12.7mm) to length-of-pull. Fits current M4 #352-150-100AT Standard Adjustable Butt Plate, provide fast, easy, vertical, horizontal, and hunting-style pad. Installation requires only minor modifications. collapsible stock designs and Tapco T6 stocks. 2E54H53 ��$ 59.99 diagonal adjustments of buttstock position May require plugging and redrilling of pad/buttplate screw holes. ab 1 7 #100-002-500AT Tapco M4/T6 Recoil Pad, 5A10B49 ��$ 10.99 to match changes in shooting style, clothing, or shooting condi- SPECS: Base Plate; ABS plastic, black. 5 /4" (13.3cm) long x 1 /8" (4.8cm)

#352-150-101AT Auto Adj. Butt Plate, 2E54K53 �� 59.99 stock adj u sters 1 tions. Machined steel thread inserts give fast recoil pad changes. wide. Pad; Rubber, black. 5" (10cm) long x 1 /4" (3.1cm) thick. Includes Completely pre-drilled, threaded, and made from easy-to-grind instructions and mounting screws. aluminum. Browning model is pre-shaped and contoured to fit the #557-100-005AT Morgan Straight Pad, complete, Browning Citori Plus and BT99. ab 7E37K23 �� $ 42.99 THE STOCK SHOP SINGLE POINT SPECS: Machined 6061T6 aluminum, anodized, black. Includes mount- CSP PAD ADJUSTER 3 #557-100-004AT Morgan Curved Pad, complete, ing hardware and Allen wrenches. Standard Jones Adjuster - 5 /4" ADJUSTABLE BUTTPLATE 1 1 7E37N23 �� 42.99 Fast, Easy, Three-Way Adjustment (14.6cm) long, 2" (5cm) wide, /4" (6.3mm) thick. Fits recoil pads with 3 /8" #557-100-105AT Straight Shoulder Pad, only, Convenient, Easy To Adjust For Exact Stock Fit c-to-c hole spacing. Browning Adjuster - 5.06" (12.85cm) long, 1.835" Machined aluminum plates give a full 1" vertical (4.66cm) wide, .295" (7.5mm) thick, with slotted lower screw hole for 7E25I20 �� 28.99 1 Adjustable buttplate system has an eccentric cam and /2" horizontal left-right, plus 90° diagonal left- c-to-c spacing of 3.14" to 3.48" (7.97cm to 8.84cm) on the stock side and #557-100-106AT Curved Shoulder Pad, only, that lets you control the position of the buttpad to pro- right adjustment. All adjustments are accomplished 3.12" (7.92cm) on the pad side. Fits Citori Plus and BT-99. Will not fit 525 7E25Q20 �� 28.99 duce a precise, customized stock fit. Improves shooter through a single hole in pad. ab Sporting Clays models. comfort and control for more accurate shooting and SPECS: Aluminum, anodized, black. Total thickness: 3 #763-100-000AT Jones Stock Adjuster, 3F56K85 �� $ 64.99 PREMIUM ADJUSTABLE RECOIL PAD - Premium ver- higher scores. Components come as flat, uncut alumi- .290" (7.4mm). Length: 5 /4" (14.6cm). Width: 2" (5cm). num plates, so you can custom-cut for an exact fit to #365-000-001AT Pad Adjuster, 5F76J63 ��$ 79.99 #763-100-001AT Brwng Stock Adjuster, 3F59M55 �� 67.99 sion with the same adjustability and contours as the thestock. Accepts all popular aftermarket recoil pads. standard model, but with a CNC machined, aluminum Thin model has a single hex head adjustment screw THROUGH-THE-PAD STOCK ADJUSTER - base plate for added strength and rigidity. Available for setting buttpad vertical and horizontal position,plus Thin Unique coupling system between the plates al- with Short or Long base plate for easy fitting to a va- 1 riety of stock sizes. rotation angle. Adds /4" to length of pull. Adjustable LOP model lows you to make adjustments without removing 3 SPECS: Base Plate - Machined aluminum, natural, polished adds two stainless steel extension rods that provide 2 /4" length of the recoil pad from the adjuster and provides more GRACO 1 7 pull adjustment and plus/minus 15° of pitch. Field-tested with over precise horizontal, vertical, and diagonal adjust- finish. Short - 5 /8" (13cm) long x 1 /8" (4.8cm) wide base 5 7 20,000 shells in trap without a glitch. ab ADJUSTABLE PAD PLATE ability than the standard model. Simply drill two plate. Long - 5 /16" (13.5cm) long x 1 /8" wide base plate. Pad 1 5 3 - Rubber, black. 5" (10cm) long x 1 /4" (3.1cm) thick. Includes SPECS: 6061 aluminum, natural finish. 6" (15.2cm) long, 2" (5cm) wide. 3" small /16" to /8" diameter holes in the pad, so you (7.6cm) c-to-c hole spacing. Includes installation hardware and instruc- Complete Adjustment For The Perfect Fit can insert the included Allen wrench to loosen the mounting screws and instructions. 1 tions. Thin – Adjustment range: 2" vertical, /4" lateral, 360° rotation. Ad- Two eccentric cams and multiple mounting hole two hex-head screws and reposition the adjuster. #557-000-001AT Short Curved Premium Pad, 3 7 5 justable LOP – Rods – stainless steel, polished finish, 3" (7.6cm) long, /8" provide a huge range of adjustments for height, cast Allows 1 /16" vertical adjustment, /16" horizontal 7E63K00 ��$ 69.99 3 3 (9.5mm) dia. Adjustment range: 2 /4" (7cm) length of pull, 2" vertical, /8" and rotation. ab offset, and up to 40º left or right tilt. ab #557-000-002AT Long Curved Premium Pad, 11 1 SPECS: Machined 6061 aluminum, black, anodized finish. 5 /16" (14.5cm) lateral, 360° rotation. SPECS: Aluminum, matte finish. Stainless steel cams. 6 /8" 7E63N00 �� 69.99 13 1 1 long, 2" (5cm) wide, /32" (10mm) thick. Fits recoil pads with 3 /8" c-to-c #070-202-400AT Single Point Buttplate, Thin, (15.5cm) high, 2" (5cm) wide. 1 /2" (3.8cm) vertical, .72" #557-000-003AT Short Straight Premium Pad, 3 hole spacing. Includes mounting hardware and Allen wrench. 7K33N26 �� $ 37.50 (18.2mm) horizontal. Adds /8" (9.5mm) to stock length. In- 7E63P00 �� 69.99 #070-000-002AT Single Point Buttplate, Adj. LOP, cludes screws and hex wrenches. #763-000-002AT Through-The-Pad Adjuster, #557-000-004AT Long Straight Premium Pad, 7K99K51 �� 109.99 #352-000-002AT Adjustable Pad Plate, 2E44K38 �� $ 49.99 3F67H30 ��$ 75.99 7E63N00 �� 69.99

order on the web

Orders/Tech: 800-741-0015 brownells.com PAGE 407 GRACO DANUSER COUNTER COIL® GRACO GRACO ADJUSTABLE COMB HARDWARE RECOIL REDUCER RECOIL REDUCTION SYSTEM GRACOIL RECOIL REDUCER The Proper Hardware Put A Hydraulic Shock Absorber Between Mercury-Filled, Fully Adjustable Spring System Cushions Your Shoulder To Make Adjustable Rifle Controls Recoil, Recoil & Your Shoulder Stainless steel piston riding in a Teflon sleeve smoothly soft- & Shotgun Combs Increases Comfort Easy-to-install, precision machined, hy- ens recoil. Improves comfort and concentration for more accurate Lets the shooter infinitely adjust draulic unit can improve the comfort of any rifle Lessens the effects of felt recoil to improve your scores; lets you shooting. Adjustable friction spring lets you fine tune the dampening head placement to get best fit for any or shotgun without huge increases in weight or concentrate on your shooting, not on a bruised shoulder. Perma- effect for heavy and light loads. Buttplate has a wide range of verti- type of shooting: rifle position shooting, changing between scopes changes in gun’s natural balance. Uses smooth, nently sealed cylinders contain mercury that resists recoil to absorb cal and horizontal adjustments. Pad plate is drilled and tapped for and iron sights or using a shotgun for both field and trap shooting. quiet, hydraulic shock absorber action to coun- shock. Provides even more “cushion” for medium to heavy shotgun standard recoil pads. ab Allows comb to adjust four ways: up, down, plus left and right. Comb teract and soften up to 52% of the actual recoil loads and magnum rifles. Shorter skeet model for maximum recoil

STOCK WORK STOCK height is adjusted by sleeves inlet into the cut-off top of the comb, force. Helps improve accuracy because the shooter can maintain control when shooting skeet and sporting clays. Fits in the draw bolt GRACOIL STANDARD - Vertical and horizontal 7 and locked with set screws through side of stock. Left and right ad- concentration on the target and not on painful recoil. Hydraulic hole. May require drilling one /8" diameter hole in some stocks. ab adjustments for drop and cast improve stock fit 7 justment is provided by posts sliding in milled slots in the base plate dampening effect is quickly adjustable to match both the needs of SPECS: /8" (22mm) diameter. Standard 4" (10.1cm) long. 13 oz. (369g). and increase shooting comfort. Thin, pad mount- and locked with set screws. Requires cutting of stock and bedding of the shooter and the recoil of the gun. ab Skeet 3" (7.6cm) long. 9 oz. (255g) wt. ing plates prevent compression pinching and plates and sleeves into stock. Stock cannot be returned to original SPECS: Aluminum plates, brass cylinder. Plates - 2" (5cm) wide, 6" #352-200-101AT Breako Std System, 2E51D20 �� $ 54.99 minimize amount of material to be removed for 1 condition. 350D features easy-to-see graduation marks for exact, (15.2cm) high. Cylinder - 3 /8" (7.9cm) long, 1" (2.5cm) diameter 12 oz. #352-200-102AT Breako Skeet System, 2E45Q92 �� 52.99 easier fitting. Rifle Recoil Reducer has a stronger repeat setting of left and right adjustment. SPL #870 and SPL #1000 (340 g) wt. Requires shortening of stock. Adds 1.25" (3.1cm) to length of compression rate to accomodate the punchier re- are individual sleeves attached to separate circular base plates that pull. Kit includes installation hardware, complete instructions. coil of rifles, and guide pins and mounting screw allow greater flexibility in left and right comb placement and angle. ab #232-100-000AT Danuser Counter Coil, 2C199G99 �� $ 199.99 RIFLE MERCURY SYSTEM - Smaller holes are closer together to accomodate smaller 1 1 SPECS: Aluminum. #425 - 4 /4" (10.8cm) long x 1" (2.5cm) wide x /4" diameter, sealed, mercury-filled rifle stocks. Also recommended for heavier recoil- 1 cylinder can be inletted into rifle 1 (6.3mm) thick. #350 & 350D - 3 /2" (8.9cm) long. Width/thickness same. COUNTER COIL ADJUSTABLE - All the great fea- ing 3" and 3 /2" magnum shotguns. ab forearms. Combine with Standard 1 SPL #870 - .870" (22.14mm) diameter base. SPL-#1000 - 1" (2.5cm) diam- tures of the Counter Coil with the addition of two, SPECS: Aluminum, natural matte finish. 6 /8" (15.5cm) 4" unit in the buttstock to tame 1 3 eter base. SPL models include two each, base plates, posts and sleeves. rotating cams to provide a full range of adjust- high, 2" (5cm) wide. Adjustments - 1 /2" (3.8cm) vertical, /4 " (18.2mm) recoil on magnum rifles and help 5 #352-100-425AT #425 Adjustable Comb Hardware, ment. Lets you easily set vertical and horizontal horizontal, 360 degree rotation. /16" (7.9mm) stroke. Adds 1" (2.5cm) to 2E34I74 �� $ 39.99 plus, left and right cant to fit your needs. ab keep the rifle “balanced”. ab length of pull. May require shortening stock. SPECS: 5" (12.7mm) long, .574" (14.5mm) diameter. 8 oz. (227 g). Installa- #352-100-350AT #350 Adjustable Comb Hardware, SPECS: Aluminum plates, brass cylinder. Plates - 2" #352-110-000AT GraCoil Std. Shotgun Recoil 1 tion requires alteration to forearm. 2E34M74 �� 39.99 (5cm) wide, 6" (15.2cm) high. Cylinder - 3 /8" (7.9cm) Reducer, 2E171C57 �� $ 179.99 #352-205-000AT Rifle Mercury System, 2E45P92 �� $ 52.99 #352-000-008AT #350D Adjustable Comb Hardware, long, 1" (2.5cm) diameter 12 oz. (340 g) wt. Requires #352-000-010AT GraCoil Std. Rifle Recoil Reducer, 2E52E56 �� 59.99 shortening of stock. Adds 1.25" (3.1cm) to length of 2E171P57 �� 179.99 pull. Kit includes installation hardware, complete instructions. #352-100-870AT SPL #870 Adjustable Comb Hardware, UNIVERSAL MERCURY SYSTEM - Fits #232-000-001AT Adj. Counter Coil, 2C269B99 �� $ 269.99 a wide selection of rifles and shotguns. 2E34G74 �� 39.99 GRACOIL ADJUSTABLE LENGTH OF PULL - Compact size fits in buttstocks or 3 #352-000-005AT SPL #1000 Adjustable Comb Quickly gives up to /4" adjustment for length of magazine tubes. Special screw allows Hardware, 2E34Q74 �� 39.99 pull plus drop and cast adjustments. Improves fitting to forearm caps on most shot- 5 stock fit to accommodate different shooting guns. Requires drilling a /16" hole in cap. ADJUSTABLE COMB TRANSFER PLATE - Marks the precise loca- styles. Provides correct fit when wearing heavy Nicely blued and polished to match the finish on most guns. ab tion for the bushing holes in the or light clothing. Allows two shooters to use the C&H RESEARCH SPECS: 3" (7.6cm) long, .840" (21mm) dia. 8 oz. (227 g) weight. comb piece quickly and easily. same gun with equal comfort. ab #352-000-003AT Uni. Mercury System, 2E47E67 ��$ 50.79 1 Before permanently anchoring MERCURY RECOIL SUPPRESSOR SPECS: Aluminum, matte finish. 6 /8" (15.5cm) high, 2" 1 the base plate in the pocket you’ve (5cm) wide. Adjustments - 1 /2" (3.8cm) vertical, .72" 5 cut in the stock, insert the transfer Uses Inertia To Absorb (18.2mm) horizontal, 360° rotation. /16" (7.9mm) stroke. plate with the points of the two, Painful Recoil Adds 1" (2.5cm) to length of pull. May require shorten- hardened steel punch screws facing up. Position the comb piece ing stock. Helps counteract the on the stock, then press down hard or rap it sharply with the heel #352-000-001AT Adj. LOP Recoil Reducer, painful effects of recoil SPEEDBUMP STOCKWORKS of your hand to scribe the exact hole locations. Depth of the scribe Chamber Model 2E269I99 �� $ 269.99 marks can be adjusted by raising or lowering the punch screws with using mercury, one of the KEN RUCKER’S AUTO-BUSTER™ the included Allen wrench. Transfer plate has tapped hole to accept heaviest, densest, liquid el- Stock screw-in plastic knob, also included, for easy removal of plate. ements. Compact, perma- Model RECOIL REDUCTION SYSTEM UNIVERSAL FITTING FIXTURE - SPECS: Aluminum, anodized, red or blue, depending on model. 350TP - nently-sealed, steel case is Firmly secures GraCoil, Graco Adjust- 1 1 1 3 /2" (8.9cm) long, 1" (2.5cm) wide, /4" (6.3mm) thick. 425TP - 4 /4" (10.8cm) made from bar stock; the only moving part is the liquid mercury so Buttstock-Mounted System Tames Felt Recoil; able Butt Plates, recoil pads, or other 1 long, 1" wide, /4" thick. 870TP - Two, .870" (22.1mm) diameter base plates, there’s no wear, no chance of leaks. Mercury’s viscosity varies only Increases Shooter Comfort & Control butt plate hardware while cutting and 1 1 /4" thick. 1000TP - Two, 1" diameter base plates, /4" thick. Each kit includes 1% from 0° F. to 90° F. which means the recoil-fighting performance grinding to proper size and contours. two adjustable punch screws, Allen wrench, and removal knob. is consistent in almost all weather conditions. Stock Models fit in Adjustable, buttstock-mounted recoil absorp- Unique design lets you remove most 1 4 tion system transforms recoil from a sharp, painful #352-000-013AT 350TP Adjustable Comb Transfer rifle or shotgun stocks and are drilled and tapped / "-28 tpi for easy of the excess material quickly with a slap to a slow, manageable push. Ideal for beginners, Plate, 2E15L41 �� $ 20.00 installation and removal. Magazine Tube fits into the 4-round mag- band saw, while preventing damage azine tube of a pump or semi-auto shotgun. Replaces the migratory youth, and smaller-statured shooters, the Auto- to the part caused by excessive heat #352-000-014AT 425TP Adjustable Comb Transfer STOCK ADJ U STERS STOCK bird plug. Includes nylon spring seat adapters for 12 gauge guns, also Buster prevents bad habits, like flinching or lifting buildup from prolonged grinding. Al- Plate, 2E15G41 �� 20.00 fits 20 gauge shotguns with adapters removed. ab your head to avoid recoil, from starting in the first lows you to set the correct heel and #352-000-015AT 870TP Adjustable Comb Transfer SPECS: Machined, stainless steel tubes. Stock 4" A - .875" dia., 11 oz. (312 place and helps experienced shooters overcome toe angles of butt pads and hold them 3 11 Plate, 2E15L41 �� 20.00 g) wt.Stock 4" B - /4" (19mm). Stock 4.25" - /16" (17mm) dia.. Stock - 5" them. May be installed on a wide range of rifles and while grinding. Multiple screw holes in the mounting plates provide 7 #352-000-016AT 1000TP Adjustable Comb Transfer A - .750" (19mm) dia., 11 oz. wt. Stock 5" B - /8" (22mm) dia. Chamber - shotguns, including semi-auto competition shot- compatibility almost all types of hardware and recoil pads. ab 1 Plate, 2E15H41 �� 20.00 5" long x .750" dia., 11 oz. wt. Magazine Tube - 5" (12.7cm) long x .750" guns, with minimal protrusion into the stock. Dual SPECS: Aluminum, anodized, matte red. 4" (10.2cm) long, 1 /2" (3.8cm) 13 (19mm) dia., 11 oz. wt. T-Handle - Aluminum handle, stainless steel shaft. machined aluminum buttplates contain an exclusive wide, 1 /16" (4.6cm) high. Includes mounting hardware and Allen wrench. 1 /4"-28 threads, 3.25" (8.2cm) x 6" (15.2cm). spring system that allows the shooter to customize #352-000-012AT GraCoil Universal Fitting Fixture, #163-100-002AT Standard Stock 4" A Recoil the amount of recoil reduction by selecting interchangeable Light, 2E45N72 �� $ 55.99 Suppressor, 3F45D85 �� $ 49.99 Medium, and Heavy tension springs (included). Rear plate is adjustable for drop at heel and 360° rotation simply by loosening and 100 STRAIGHT #163-000-006AT Standard Stock 4" B Recoil tightening a single Allen head bolt. Comes drilled and tapped to Suppressor, 3F45H85 �� 49.99 1 DEAD MULE RECOIL REDUCER accept a wide variety of aftermarket recoil pads with 3 /8" center-to- #163-000-005AT Standard Stock 4.25" Recoil center hole spacing. Gunsmith installation recommended; requires Can’t Kick Suppressor, 3F45K85 �� 49.99 removal of existing buttpad or plate and shortening the stock. ab Mechanical pis- #163-000-004AT Standard Stock 5" A Recoil SPECS: Body - machined aluminum, natural silver finish. Guide/Spring QUESTIONS BEFORE YOU BUY? 1 ton reduces felt recoil Suppressor, 3F45B85 �� 49.99 System - stainless steel. 6 /8" (15.5cm) tall, 2" (5cm) wide, 12 oz. (340g) without changing the point of impact. Fits in any buttstock with a #163-000-007AT Standard Stock 5" B Recoil weight. Includes light, medium, and heavy spring sets, mounting hard- Ask Our Full-Time Tech Staff 7 1 /8" dia. x 4 /2" deep stock bolt hole. ab Suppressor, 3F45Q85 �� 49.99 ware, Allen wrenches, and installation instructions. 7 1 SPECS: Steel body. /8" (22mm) diameter, 4 /2" (11cm) long. #163-100-001AT Magazine Tube Recoil Suppressor, #100-004-743AT Auto Buster Recoil Reduction 800-741-0015 #365-509-100AT Dead Mule Stock Model, 5F69G99 �� $ 69.99 3F58F69 �� 64.99 System, 9D286G49 �� $ 309.99 RECOIL RED U CERS RECOIL SATISFACTION GUARANTEED

PAGE 408 SINCE 1939 Office/Tech: 641-623-5401 STOCK1911 AUTO WORK 10/22fittin PERFORMANCEg jigs & gaug PARTSes 10/22CHECKERIN PERFORMANCEG SUPPLIES PARTS recoil reducers - - $ 6.99 $ 19.99 $ 32.99 $ 45.00 409

When A Line A When Starts Astray! Starts Saves The Day The Saves ��

PAGE �� ab Handle & Cutter not included Handle & Cutter not Of Checkering Size Checkering Of 1D4K67 4H17P70 ab Easy-to-use template identi Easy-to-use template etter Control Better " (8mm) thick. Fits checkering tools " (8mm) thick. Fits checkering Fast, Accurate Determination Determination Accurate Fast, fies checkering spacings from 16 spacings from fies checkering 16 8K39M64 / 5 �� NO. 131 NO. DEM-BART DEM-BART " (7cm). 4 " - / 8 3 / 1 THE “JOINTER”

" (1.3cm) dia. x " (1.3cm) 2 No. 131 Checkering Riffler, No. 131 Checkering 6C32P99 Jointer Tool, Checkering Gauge, Checkering Finger Rest, 5-pak, Finger Rest, / 1 CHECKERING GAUGE CHECKERING

" (22.2mm) cutting area, 90° only. " (22.2mm) cutting area, CHECKERING RIFFLER CHECKERING 8 / 7 ab Delivers Added Comfort & Added Comfort Delivers Shapes The Diamonds Smoothly, Professionally Smoothly, Diamonds Shapes The Tool Steel, the right hardness so you can resharpen with 60° so you can resharpen hardness Steel, the right Tool 6" (12.7cm) long. “V” is 60°. Approx. 1" (2.5cm) edge. 1" (2.5cm) long. “V” is 60°. Approx. 6" (12.7cm) 9" (22.9cm) x 2 9" (22.9cm) Aluminum. " (3.2mm) wide or less square shank. wide or less square " (3.2mm) 8 / 1 CHECKERING TOOL FINGER REST TOOL FINGER CHECKERING Checkering Rifflers are used by many professional checkerers checkerers used by many professional Rifflers are Checkering A tool that’s not often used until it is needed - and then it’s the used until it is needed - and then it’s often not A tool that’s Polished, grooved Polished, grooved ering, cleaning up damaged or old checkering, and border work. The and border ering, cleaning up damaged or old checkering, a cutting shape, 3-square full a has carry and recommend we 131 No. corners, will cut on 60° angle. File teeth meet exactly square perfect Has approximately diamond grooves. bottom of finest hairline cut at to work with. nice tip. Exceedingly 35° up-bend at SPECS: SPECS: SPECS: file, 3-square and stockmakers instead of bent needle files for pointing-up check bent needle files for instead of and stockmakers most necessary checkering tool you can own! Its main purpose is to most necessary checkering and to make gone astray, which have lines straighten out checkering alive, isn’t a checkerer straight. There layout and other lines really hasn’t had a line one time or another, or rank novice, who, at pro out such a line - without left field. Straightening suddenly head for - can easily drive you right up the wall! A “must-have” a Jointer Tool checkerer. the beginner or professional for #360-318-971AT #080-556-000AT to 32 lines-per-inch. Place over pattern to be measured and match and match to be measured Place over pattern to 32 lines-per-inch. scale. Oblique diamond shape helps provide the lines on the proper layout lines. of determination accurate SPECS: SPECS: #241-000-001AT with chors firmly in place chors firmly bent needle for Great easily. yet repositions set screws, with two files, too. SPECS: finger rest improves improves finger rest and control comfort tool any checkering of shank with a square wide or smaller. An wide or smaller. #084-000-236AT - ab 79.00 24.99 $ 24.99 $ 59.99 $ 150.00 �� " (62cm) wide. Fits " (16mm) drop-at- " (16mm) 2 8 Designs / / 1 5 1C23D04

5B53L39

" (13mm) drop-at-comb, " (13mm) drop-at-comb, 2 Full-scale templates templates Full-scale / 1 1C23G04 Full-Scale Dimensions Full-Scale 9A72Q87 For Duplicating Classic Duplicating For by master stock maker by master stock maker you to Fisher allow Jerry his classic stock duplicate critical designs. Features almost are dimensions that " (6.3cm) pitch-down. Winchester " (6.3cm) 2 / 1 " (136cm) long x 24 2 / 1 � �� PROJX " length-of-pull, " length-of-pull, 2 / - - 1 JERRY FISHER JERRY " (34.3cm) length-of-pull, length-of-pull, " (34.3cm) 2 / 1 nder ROBERT LOUIS CO. LOUIS ROBERT " pitch-down. Mauser 98 Template, Winchester 70 Template, 9A139K31 Shotgun Combo Gauge, Magnetic Extension, Stockmaker’s Fit Board, Stockmaker’s 2 / 1 ab SHOTGUN COMBO GAUGE COMBO SHOTGUN Gun and rest not included rest Gun and STOCKMAKER’S FIT BOARD STOCKMAKER’S CUSTOM STOCK TEMPLATE CUSTOM STOCK " (19mm) drop-at-heel, 2 " (19mm) drop-at-heel, Perfect Fit Shotguns 4 Mauser 98 35" (89cm) long x 23" (58cm) wide. Mauser Heavy paper. / Laminated template. 53 template. Laminated 3 ives You Precise Precise You Gives Lightweight, aluminum gauge measures length of pull, drop at at pull, drop of length gauge measures Lightweight, aluminum Innovative, easy-to- Innovative, Measurements For A For Measurements " drop-at-heel, 2 " drop-at-heel, For Fitting Over/U Fitting For 8 / impossible to measure accurately from an actual stock for easy an actual stock for from accurately impossible to measure reference stock. Great blank or an existing layout on your favorite stock. rifle custom own your designing for point starting and source measured 22" barrels, Mauser 98 is a lightweight sporter design for Winchester maximum muzzle O.D. the bolt face, with .525" from long actions with 22" to M70 is a medium weight sporter stock for barrels. 24" comb, comb, SPECS: SPECS: - Stock dimensions: 13 5 M70 - Stock dimensions: 13 #310-000-002AT #310-000-001AT gun Combo Gauge to the rib or barrel using a magnet for hands- using a magnet for or barrel gun Combo Gauge to the rib easy drop tool for Extension adds 20" to steady the operation. free pitch. of 180 degrees measures protractor Plastic measurement. Aluminum. Overall length 28" (71cm) Gauge - Aluminum. Overall length 28" Combo Shotgun SPECS: (58.5cm). - Aluminum. Overall length 23" Extension Magnetic comb and heel, and angle of pitch to give a precise fit. Units of of fit. Units pitch to give a precise and angle of comb and heel, numbers in both inches and in bold, easy-to-read are measurement and has to 24" pull length of world-wide use. Measures metric for 28", you can accurately length of With a 29.5". an overall length of the Shot “glues” Optional 23" Magnetic Extension drop. measure #100-002-155AT #100-002-154AT over/under shotguns with barrels up to 30" long. with barrels over/under shotguns work out of fitting shot work out of guns to customers. Simply at pull, drop the length of and read lay your shotgun on the board all over/under shotguns with barrels and pitch for comb, cast off/on easy-to-read with large, template up to 30" in length. Bench sized paper is laminated Heavy-duty, a tough job easy. numbers makes convenient storage. to most solvents. Rolls up for resistant SPECS: use board take’s the guess take’s board use #100-004-269AT - - - - - order on the web ab

$ 99.99 $ 40.85 " (9.5mm) " (9.5mm) 8 " (22.2mm) / brownells.com 8 3 / 7 �� ab �� Professional, Lets You Do Fast, Do Fast, You Lets One of the most dif most the of One 8K85C72 " (3.5cm) wide x " (3.5cm) DROP AT HEEL DROP AT No-Mar Pad Installation Pad No-Mar 8 8K34L07 ficult aspects of fitting a ficult aspects of pad has always been recoil pad to the final fitting of wood because it is so easy to hit the stock with the file or strip, sanding disc, - and ruin the finish. The B&R Recoil Pad Fitting Jig stock of risk the removes damage by letting you fin ish the pad completely off - the stock. - and away from / " (3.1cm) wide x " (3.1cm) 3 LENGTH OF PULL 16 / 3 B&R RECOIL PAD PAD B&R RECOIL FITTING JIG - - - Recoil Pad Fitting Jig, Recoil Pull & Drop Gauge, PULL & DROP GAUGE & DROP PULL Steel support is 20¼" (51.4cm) long. Steel triangle legs are ap long. Steel triangle legs are Steel support is 20¼" (51.4cm) Long “Leg” is 24" (61.0cm) long x 1 (61.0cm) is 24" “Leg” Long Stock Fitting Stock Fast, Accurate Accurate Fast, Operation is simple. First, cut the stock to the length and pitch is simple. First, cut the stock to the Operation reduces and finish stock the to all damage eliminates Jig The The Jig is composed of two basic pieces: (1) an adjustable tri two basic pieces: (1) The Jig is composed of Proper stock “Pull” stock “Pull” Proper Measurements For For Measurements required to fit the customer. Attach the pad to the stock, and sharply the pad to the Attach to fit the customer. required to the pad transfer the stock on the pad. Then scribe the outline of its sup Jig on put the pitch, of angle the Jig, set the of base plate the - to a simple 15 minute exercise pad mounting operation the entire one. making the job an easy and highly profitable is 3½" (9cm) long. base plate long. Aluminum 11¼" (29.2cm) proximately Includes instructions. angle on which the pad is mounted to be dressed to size, and (2) a and (2) to size, dressed is mounted to be angle on which the pad disc table. to the sanding attaches universal support that the scribed line just removing of the pad to the point port, and dress test (this is necessary as the line was drawn outside the stock). Finally, by hand, if needed. fit the pad to the stock and do any final dressing into the pad - and you carried correctly the stock are The lines of fit! a perfect have SPECS: #080-000-868AT thick. er’s shooting proficien shooters few yet cy, or is, it what understand either may stock a why box, the fit right out of length to be or have ened or shortened to fit find To him personally. you must measure a customer, pull for the correct oil Gauge, beautifully made of him! Our Pull & Drop designed tool is a professionally finished solid cherry, and quickly Accurately to do two important jobs: 1) the shooter’s forearm of pull and drop the measure and authenticity to your 2) Add professionalism and trigger-finger. and to generate sales, to increase Drop” and “Pull of explanation custom fitting jobs. more for pull and drop in correct interest SPECS: thick. Short “Leg” is 6" (15.2cm) long x 1 is 6" (15.2cm) thick. Short “Leg” is one of those gun is one of is vitally functions that the own important to #080-033-000AT " - - - - 8 / 7 $ 19.99 $ 80.79 $ 61.99 $ 61.99 $ 56.99 $ 56.99 $ 56.99 $ 66.99 �� PRICE

(8.9cm) long, 6 " (8.9cm) 2 ab 3K51F71 3K51B71 / 3K47A35 1 3K47C35 " (2.2cm) diameter. " (2.2cm) diameter. 3K47Q35 8 / " (22.2mm) diameter. " (22.2mm) diameter. 7 2E69B65 8 / 3K61A85 7 ab " 2 / 1 3" 3" 3 4" 4" LENGTH ab Aluminum cylinder with cylinder Aluminum Reinforcement Plates Reinforcement Absorbs & Redirects Recoil Redirects & Absorbs - - 800-741-0015 springs and piston absorbs recoil recoil and piston absorbs springs bounce. Fits barrel to minimize butt shotgun in hole drawbolt Prevents Grinding Into Steel

Brass templates lets you know Brass templates where the steel reinforcement plates plates reinforcement steel the where recoil in all closed-side Pachmayr are cutting into you from pads to keep pad. Place them when shaping a recoil and pad new the behind template the clearance visibly check the amount of ab �� RECOIL REDUCER RECOIL PACHMAYR " Forstner drill bit centered, and stop collar and " Forstner drill bit centered, 8 RECOIL REDUCER REDUCER RECOIL / ADJ. 7 Adj. Non-Adj. Non-Adj. Adj. Non-Adj. Recoil Reducer Drill Fixture, Reducer Recoil Recoil Pad Grinding Templates, Recoil 5K17B14 Reducer, The MAX Recoil " diameter works in bored holes or drawbolt chan in bored " diameter works 8 / 7 GRACO GRACO EDWARDS EDWARDS Recoil Reducers Recoil uttstocks For Tubular Tubular For Buttstocks

Brass templates. Set of four for small, medium, large and large and large small, medium, large for four Set of Brass templates. (7.62cm) long, 6 oz. wt., 3 long, 6 oz. 3" (7.62cm) Aluminum, silver. Steel, blue finish. Includes locating plate, drill guide bushing, drill plate, Steel, blue finish. Includes locating Aluminum, polished finish. 5" (12.7cm) long x Aluminum, polished finish. 5" (12.7cm) " diameter, tubular recoil reducers. Steel fixture saves you saves fixture Steel reducers. tubular recoil " diameter, 8 DRILL FIXTUREDRILL / 7 STOCK # STOCK Everything you need to drill Everything

Inlets RECOIL PAD GRINDING TEMPLATES GRINDING PAD RECOIL Adjustable - 1" (2.5cm) diameter. Adjustable - 1" (2.5cm) coil away from your cheek. 3" model fits Krieghoff and others with others and fits Krieghoff model 3" cheek. your from away coil and combs. adjustable pads SPECS: stock or, drill a hole in rifle stocks. Adjustable model directs felt re felt model directs Adjustable stocks. drill a hole in rifle stock or, (10.2cm) long, 6 oz. wt. Non-adjustable - wt. Non-adjustable oz. long, 6 wt., 4" (10.2cm) oz. locks onto bit shank to prevent drilling too deep on the first pass. onto bit shank to prevent locks and use the drill bit plate locating the Once hole is started, remove the way. of and guide bushing to drill the rest (2.2cm) diameter Forstner bit, stop collar with setscrews, Allen wrench, Allen wrench, with setscrews, (2.2cm) diameter Forstner bit, stop collar instructions. and complete SPECS: SPECS: ing a decent profit. Sturdy, blued steel locating plate attaches to to attaches plate blued steel locating Sturdy, ing a decent profit. slotted to is and pad screws existing recoil gun’s buttstock using the Nylon-lined guide bushing keeps hole spacing. adjust to any screw tool steel the hardened tered holes in buttstocks for install for holes in buttstocks tered ing hours of “eye-balling” and trial and error, so you can provide your so you can provide and trial and error, “eye-balling” hours of cost, while still earn a reasonable customers a valuable service at straight, correctly located and cen located straight, correctly

#352-000-009AT Orders/Tech: #690-000-019AT SPECS: SPECS: pads. magnum Pachmayr recoil left while shaping. Set of four templates work with small, medium, templates four left while shaping. Set of pads. magnum recoil and large large, #100-001-949AT nels of wood stocks, easily glued into synthetics. wood stocks, nels of SPECS: “THEREDUCER - RECOIL MAX” maximum Extra-length provides magnum rifles for reduction recoil and shotguns. 7.5 oz. (213g) wt. oz. 7.5 #100-000-316AT #100-000-312AT #100-000-314AT #100-000-315AT #100-000-311AT 10/22 PERFORMANCE PARTS 10/22checkerin PERFORMANCEg supplies PARTS 10/22 PERFORMANCE PARTS STOCK1911 AUTO WORK they imagined. performance. Beginnersfindthat checkering isnotasdifficult as diamonds. Professionals appreciate thesetoolsfor theirconsistent as youchecker. hold replaceable cutterheadrigidlyandeliminate tendencytorock control andminimumfatigue. Steel shank is slotted at thetip to handle isshapedfor precise quickly interchangeable. SPECS: rows and exceedingly precise checkering. as checkering progresses from righttoleft.Produces verystraight lows a fine guideline. Left-hand blade has teeth and cuts a new row No. 3LEFTHANDSPACING TOOL -Smooth,right-handbladefol SPECS: deepening tool. other blademarks thenextrow. Thisisacombination spacerand ing rows after marking.Onebladefollows aguidelinewhilethe No. 2DU shapedwithteethonbothsides. “V” and todeepenrows after theyare marked inwithspacingtools. -Usedfor makingtheoriginallayout No. 1 SINGLE LINE C UTTER SPECS: ter w/handle, No. B-1 border cutter and checkering gauge. 90˚ cutters. only,cutter only,cutter w/handle,No.4guideline No.2line No.S-1cut SPECS: (9cm) shank — Advise# #241-100-002AT #241-100-001AT #241-010-000AS #241-600-018AQ #241-600-016AQ Triple Skip LineR Skip LineL No. 4 No. 3 No. 2 STYLE Slanted cutterteethmake deep,evengrooves andsharppointed Hardwood, steel-ferruled Holds Cutter Rigidly STOCK # See chartfor lpi,Stock#andprice. See chartfor lpi,Stock# andprice. 7 Set includes: No. 1C single line cutter w/handle, No. 1F cutter 1F No. w/handle, cutter line single 1C No. includes: Set

1 / HANDLE -Usedfor markingrows andfor deepen AL CUTTER 2 #241-400-016AT #241-200-016AT #241-300-016AT #241-530-016AT " (19cm) overall length. 4" (10.2cm)overall length.4" (19cm) " 3 handle, wood long STK# 16LPI ab NA NA Checkering StarterSet,1D33C36 No. 1Coarse, No. 1Fine, 1D4I42 Dem- Dem- LPI 18 16 #241-400-018AT #241-200-018AT #241-300-018AT #241-502-018AT #241-530-018AT #241-501-018AT Bart Checkering Handle,only, Bart Replacement Cutters, LessHandles;AllDem- ab � Wide Selection Of Head Designs For Every Situation; CutTrue,Wide Selection Of Head Designs For Every SharpDiamonds STK# 18LPI sharp, true diamonds. Cutters are a miniature raspthat willquicklycut to getstartedproperly. Eachcutteris beginners wouldhave therighttools stockmaker BillMcGuire tobesure ering toolsselectedbyprofessional 1D4J31 Quickly Interchangeable Heads; Smooth-Cutting, Rasp-Type Heads; Practical assortmentof check 1D4B31 PAGE #241-600-022AQ #241-600-020AQ DEM-BART � STARTER SET #241-400-020AT #241-200-020AT #241-300-020AT #241-502-020AT #241-530-020AT #241-501-020AT STK# 20LPI The �

STOCK # DEM-BART 410 Basic Kit � #241-400-022AT #241-200-022AT #241-300-022AT #241-502-022AT #241-530-022AT #241-501-022AT STK# 22LPI REPLACEMENT CUTTERS REPLACEMENT $ 46.99 LPI 20 22 $ 6.20 $ 5.99 CHECKERING SETS 5.99 1 / 2 - - - - " #241-400-024AT #241-200-024AT #241-300-024AT #241-502-024AT #241-530-024AT #241-501-024AT STK# 24 LPI final border around thelayoutorpattern. No. B final border around thelayoutorpattern. No. B SPECS: spaced pattern. Has equalizingeffect onlines-per-inch toassure even,correctly- - Three cutting blades. Used after pattern lay-out. TRIPLE CUTTER SPECS: left, “L” orright,“R”. SKIP LINE&R-Self-guiding,skip-one-linecuttersw/teethon SPECS: that therighthandbladeiscuttingblade. No. 4RIGHTHANDSPACING TOOL -IdenticaltoNo.3, except SPECS V-Shape. and canbere-bent tosuit.Cutterbladesfurnishedinfinecutonly. ners, curves and out-of-the-way places. The shank ismild steel complete withhandles. 90°cutters. SPECS: #241-001-100AT #241-001-000AT #241-150-001AS — Advise# #364-500-520AT #364-500-518AT #364-500-516AT #241-150-002AS Gets intothosetightcor STOCK # Gets Into Tight Places -2 TOOL - A narrow, bordering tool which is used to put the -1 TOOL -Awide,bordering toolwhichisusedtoputthe : 7" (17.9cm) overall.4"(10.2cm) handle,3"(7.6cm) shank.90°cutter. Set includes:Nos.C1,F1,S1andStyle2,34cutters, See chartfor lpi,Stock# andprice. See chartfor lpi,Stock# andprice. See chartfor lpi,Stock# andprice. Bart Cutters Fit AllDem- S-1 TOOL #241-200-026AT #241-530-026AT STK# 26LPI 1D54H14 Dem- NA NA NA NA 1D3P21 S-1 Checkering Cutter, only, 1D8M42 S-1 Checkering Tool Complete, B B -2 Narrow, -1 Wide, art Master Checkering Set, Bart MasterCheckering Set, LPI 20 18 16 SATISFACTION GUARANTEED � #241-200-028AT � checkering withacompleteset. the neophytewhowantstostartout professional inmind,yetagreat setfor needed isaveiner. Designedwiththe the onlyadditionaltoolthat maybe ers. Handlesallcheckering beautifully; � STK# 28LPI 1D3D72 - A favorite setof MasterStockmak NA NA NA NA NA 1D3K72 Bart Handles Designed For The Pro

#364-500-528AT #364-500-524AT Handle and90°CutterAssemblies � MASTER SET SINCE 1939 STOCK # #241-200-032AT � STK# 32LPI NA NA NA NA NA

1D4M31 1D5H22 1D4A90 1D4N31 1D4L90 1D4B31 PRICE LPI 28 24 $ 64.99 $ 10.99 $ 5.99 $ 5.99 $ 6.99 $ 5.99 $ 5.99 $ 5.99 $ 5.99 $ 5.99 3.99 - #364-453-216AT #364-452-116AT #364-401-003AT #364-300-316AT #364-200-216AT skill levelincreases. Gauge, Patterns andInstructions. Border-Vex,V-Edger, Pointer- Long, Veiner, Jointer,60° JT Pinsetter, Rule SPECS: structions; 60°spacers, 90°cutters. erer’s Rule;LayoutGauge;Illustrated In Border-Vex; V-Edger; Pointer Long; Check SPECS: #364-900-016AT — Advise# #364-900-028AT #364-900-024AT #364-900-022AT #364-900-020AT #364-900-018AT #364-500-520AT #364-500-518AT #364-500-516AT #364-102-090AS #364-100-090AS #364-106-601AS #364-100-060AS #364-102-060AS STK# 16LPI Affordable andeasilyexpandedas STOCK # Set includes6complete tools:2-Edge Spacer, 3-Edge Spacer, Includes 4tools:2-Edge Spacer; short radiuspatterns. No. PSPOINTER-SHORT -Fine-toothfinishingtoolfor deepen thecheckering aswelltofinishtheoutline. line andguidelinesof thecheckering pattern andto No. V A See chartfor lpi,Stock #andprice. No. KL & KR SKIP CHECK - accuracy. 60°.Seechartfor lpi,Stock #andprice. a timefor greater speed,oronegroove at atimefor No. S-3THREE-EDGE SPACER -Spacetwogrooves at 60°. Seechartfor lpi,Stock #andprice. groove whilethesecondridesinapreviously cutgroove. No. S-2TWO-EDGE SPACER -Oneedgecutsanew as aborder. Erasessomeoverruns.Saves time. No. BCNORDER-CONCAVE -Cutsaconcave groove LEADER SET Great Starter Set -EDGER -Single-edgetoolusedtoscore theout Leader Set,4F59G66 #364-453-218AT #364-452-118AT #364-401-004AT #364-300-318AT #364-200-218AT 22 LPIPremierSet, 20 LPIPremierSet, 18 LPIPremierSet, 16 LPIPremierSet, 28 LPIPremierSet, 24 LPIPremierSet, BCN orderConcave, No. V-Edger 60°, No. PSPointer, Short,90°, No. PSPointer, Short,60°, No. V-Edger 90°,

ab 20 18 16 STK# 18LPI LPI ab Complete, Professional Quality

start checkering includingde handles. a patterns. Cutters fit all Gunline tailed instructionsandsample Positive, Spring-Pinned Heads;Smooth Cutting;Long Lasting #364-500-528AT #364-500-524AT #364-453-220AT #364-452-120AT #364-401-001AT #364-300-320AT #364-200-220AT 4F7M06 4F7K06 Skip-one-line cuttersw/teethonleft(KL)orright(KR).60°.20and22lpiare universalleft/right. � - - 4F128G98 4F128G98 4F128P98 4F128D98 4F128A98 4F128F98 Everything youneedto STK# 20LPI PREMIER SET STOCK # 4F5I77 GUNLINE CHECKERING SETS GUNLINE REPLACEMENT CUTTERS GUNLINE REPLACEMENT � b ab � 4F5J98 4F5D98 � � � � � � � ab � #364-453-222AT #364-452-122AT #364-401-002AT #364-300-322AT #364-200-222AT � 28 24 $ 64.99 ab $ 139.99 139.99 139.99 139.99 139.99 139.99 STK# 22LPI LPI Office/Tech: $ 6.99 $ 7.99 $ 7.05 ab 6.99 7.99 ab - - #364-600-618AT #364-600-622AT #364-600-616AT offset, 3-1/2" shank.H-3offset, 3-1/2" sharpbendfor Pointershort.2-3/4"shank. dles. H-1 offset for goodrear view, longshank.H-2 3-1/2" curved,no lustrated Instructions.60°spacers, 90°cutters. Pointer-Long, Veiner, Checkerer’s Rule,LayoutGauge,Patterns andIl SPECS: #364-000-013AS #364-175-012AS #364-002-200AS #364-003-300AS #364-001-100AS #364-004-000AS #364-101-902AS #364-101-901AS #364-105-603AS #364-101-602AS #364-105-602AS #364-105-601AS #364-101-601AS — Advise# STOCK # 4" longwoodhan #364-453-224AT #364-452-124AT #364-401-005AT #364-300-324AT #364-200-224AT Every Cutter Every Get One For Includes: 2-Edge Spacer, 3-Edge Spacer, Border-Vex, V-Edger, STK# 24 LPI left direction. 60°.Seechartfor lpiStock #andprice. safe edgefollows lastrow cut.Reversible,cutsinrightor No. SDTWO-EDGE SPACER -Onecuttingedge,one left direction. 60°.Seechartfor lpiStock #andprice. teeth” edgesfollow lasttworows cut.Cutsinrightor No. SETHREE-EDGE SPACER - Reversible - Two “no Medium (M)andFine(F). used to“Point-Up” diamonds,finishoutline.60°and90°, No. PL-60 &PL-90 POINTER-LON G -File-typecutters BV-XW (extra-wide)comesin16lpisets.60°. comes in20-28lpisets,BV-W (wide)comesin18lpisets. der around thepattern. Erasesoverruns.BV-N (narrow) No. B V-N & Camp Perry Set,4F101Q25 Camp Perry 12, H3Replacement Pins, 4F3M80 12, H1/H2Replacement Pins, Gunline H-3 Handle, Gunline H-2 Handle, Gunline H-1 Handle, Checkerer’s Rule, B B B PL-90M Pointer, PL-90F Pointer, PL-60M Pointer, PL-60F Pointer, GUNLINE HANDLES V-XW BorderVex, V-W BorderVex, V-N BorderVex, LPI 22 18 16

- #364-453-228AT #364-452-128AT #364-401-006AT #364-300-328AT #364-200-228AT 641-623-5401 B and accessoriestoensure success.a Standard handleswiththeproper cutters all woods.Sixcompletetools;Offsetand to finish,simplecomplexpatterns, in V-W The“ Works” Set For STK# 28LPI � Do anycheckering jobfrom layout BORDER-VEX -Cutaconvexbor CAMP PERRY SET ab 4F7K06 4F7C06 #364-600-620AT #364-600-624AT 4F7J06 4F7Q06 4F3E27 4F7N06 4F7Q06 4F7H06 STOCK # 4F7L99 4F6G40 4F7K62 SD SE KL/KR S-3 S-2 � � � � � 4F3G61 � Beginners & Pros � � STYLE �

� � � � ab $ 109.99 LPI 20 24 b $ 8.99 $ 8.99 $ 8.99 $ 8.99 $ 7.99 PRICE $ 8.99 $ 7.99 $ 7.99 4.99 8.99 6.99 3.99 7.99 7.99 7.99 7.99 7.99 3.99

ab ab ab - - STOCK1911 AUTO WORK CHECKERING SUPPLIES shaping/inletting tools " 2 / 1 ab ab $ 9.99 $ 9.99 $ 9.99 $ 9.99 $ 9.99 $ 9.99 $ 9.99 21.99 $ 4.99 $ 10.99 $ 21.99 $ 34.99 $ 38.00 " (8.2cm), " (8.2cm), 4 / 411 1 PRICE

" (7.9cm), 1 " (7.9cm), 8 ab 9A7F33 9A7J33 / 9A7K33 9A6P96 9A7N33 1 9A7G26 9A7Q33 �� 9A10M07 Inletting �� PAGE �� Action Square While Square Action 1D18A31 1D18I31 Only Way You Can Keep Keep Can You Way Only FITS ab

7E34B99 5A38E00 ives A Visual Fit Check Fit Visual A Gives

2A4G76 Intense blue paste clearly marks Intense blue paste clearly marks Springfield/Krag Win. 70 Mauser Enfield Rem 700/721/722 110/WBYMKV Sav Dakota 6.5 Arisaka 6.5 Arisaka 7.7 Sako, Howa, Sako, WBY S&W 1500, Vanguard " (4.8mm) dia. Sold in pairs. " (4.8mm) 16 high spots on parts being fitted. / 3 Bart Veiner, Bart Veiner, PRUSSIAN BLUE PRUSSIAN FORSTER "-25 "-32 "-22 "-30 "-28 4 4 4 4 4 / / / / / THREAD " (12cm) length. Handle overall is 3 VEINER 6x.9mm 6x.75mm 6x1mm 1 1 1 1 1 4 / 3

Puts the cutting edge " (8.2cm) long blade. " (8.2cm) 6 Palm Chisels, FS76 Gouge Slip, Prussian Blue, 60° Dem- 90° Dem- 4 / QTY 1 Each Each Each Pair Pair Pair Pair Pair " (11.7cm) overall length. Handle is 3 overall " (11.7cm) 8 / 5 PERMATEX PERMATEX " (11.4cm) overall length. Handle is " (11.4cm) INLETTING GUIDE SCREWS 2 oz (21.2g) tube. oz / 4 ACCESSORIES 1 / 3 Approx. 3" (7.6cm) long. 3" (7.6cm) Approx. 6" (15.2cm) long. 6" (15.2cm) 4 STOCKMAKING DEM-BART Holds Sharp Edge Sharp Holds Headless, extra-long design so you can repeatedly take barreled barreled take so you can repeatedly Headless, extra-long design Short, compact veiner compact veiner Short, STOCK # STOCK " (3.2cm) with 3 " (3.2cm) " (3.8cm) shank. " (3.8cm) 4 2 / / 1 1 Compact Design, Takes & Takes Design, Compact #319-415-605AT #319-415-707AT #319-415-721AT #319-415-070AT #319-415-098AT #319-415-170AT #319-415-270AT #319-415-700AT #615-100-006AT #657-071-076AT 1 PALM CHISELS - PALM SPECS: SPECS: SPECS: SPECS: GOUGE SLIP - A universal sharpener for gouges and curved edges. Also used for lapping inside or outside curved surfaces. SPECS: SPECS: screws. stock without removing action in and out of directly at your fingertips and snuggles the your fingertips and snuggles at directly handle in your palm to give total control finish- every working angle. Blades are at hardened. polished and properly ground, #100-001-581AT (3.8cm) shank. 90° - 4 shank. (3.8cm) SPECS: 60°- 4 SPECS: puts you closer to your work closer you puts when making maneuverability all-angle and no-slip control firm, for diamond for work. Perfect or any border curved lines, fleur-de-lis is curved shaft V shaped Tool-steel, junctions. border cleanup at edge. sharp and holds Takes efficiency. cutting increase to upward put it down fact, we couldn’t natural…in handle feels Palm-sized good scrap wood in sight! on every piece of until we’d carved 1 #241-026-090AT #241-026-060AT " " - - 32 64 / / 5 11 – ¼" 48.99 48.99 44.99 44.99 44.99 58.00 50.00 50.00 42.00 42.00 " (2mm) $ 44.99 $ 58.00 64 " (4.4mm) " (4.4mm) / �� " (3.6mm) " (3.6mm) 5

64 64

/ / 11 9 Type 3 Type Type 4 Type Type 1 Type – " (4mm) skew, " (4mm) skew, ��

32 �� / For Inletting & Inletting For Precision-made Precision-made �� 5 " (2.4mm) veiner, veiner, " (2.4mm) cutter works 4 cutter works Type 9K42J99 �� Detailing Stocks Detailing 32 " " (3.6mm) bent parting, bent " (3.6mm) " (5.6mm) bent chisel. bent " (5.6mm) / 8 High-Quality Tools High-Quality Tools 3 32 64 / " (5.6mm) straight chisel, straight " (5.6mm) / / 3 wood carving tool sets contain a variety of for gouges and chisels or just inletting stocks 7 9 32 / 7 Linoleum Cutting Set Cutting Linoleum " (2.8mm) gouge, " (2.8mm) " (4.4mm) skew, skew, " (4.4mm) 64 ab ab / 3C50J00 3C50N00 3C42P00 3C58G00 64 7 / " (4.8mm)) gouge, ¼" (6.4mm) gouge, ¼" (6.4mm) " (4.8mm)) 3C42G00 3C58J00 – 11 16 / 3 �� " - - 8 / 5 �� works well at bringing the dia bringing well at 3 works Type " (3.2mm) gouge, " (3.2mm) 8 " " (9.5mm) chisel, " (9.5mm) " (5.6mm) skew, skew, " (5.6mm) 8 / " (2mm) bent " parting, (2mm) bent 16 1 / 32 3 / Mini Carving Mini parting. straight Set – " (3.2mm) 64 / " (3.2mm) veiner, veiner, " (3.2mm) ULLMAN PRECISION ULLMAN 3 8 7 8 / / 5 / 9K46G99 9K46C99 1 1 U.J. RAMELSON U.J. " (9.5mm) bent chisel. bent " (9.5mm) 8 Palm Handle Carving Set, Palm Handle Linoleum Cutting Set, Set, Palm Handle Mini Woodcarving CarvingPalm Handle Subminiature Set, CarvingPalm Handle Microminature Set, 9K42N99 9K42G99 Straight Handle Carving Set, 9K42M99 1, Push Tool, Type 1, Pull Tool, Type Push Tool, 3, Type Pull Tool, 3, Type Tool, Push 4, Type Tool, Push 4, Type / " (3.2mm) gouge, " (3.2mm) 3 8 " (2.4m) bent parting, bent " (2.4m) / 1 32 / HAND CHECKERING TOOLS CHECKERING HAND 3 " (7.9mm) gouge, " (7.9mm) " (4mm) chisel, WOOD CARVING TOOL SETS CARVING WOOD 16 32 / " (3.2mm) veiner, veiner, " (3.2mm) / Carbide cutters. Wooden handles. 90° only. Carbide cutters. Wooden 5 8 5 / 1 These Doiron, single-line, single-line, Doiron, These " (9.5mm) skew, skew, " (9.5mm) " (3.2mm) bent parting, bent " (3.2mm) 8 8 / Makes Precise Single Line Cuts Single Precise Makes / (4mm) bent chisel. (4mm) bent (4.4mm) chisel, (4.4mm) gouge, cleaning up the corners after bedding. Each kit comes with six differ bedding. Each cleaning up the corners after ¼" (6.4mm) bent gouge, bent ¼" (6.4mm) 1 ent-size tools, perfect for the novice or seasoned pro alike. Shanks Shanks alike. seasoned pro the novice or for tools, perfect ent-size and polished tool steel, then ground hardened machined from are smooth, easy carving. Palm Handle - Designed to a sharp edge for ideal for your fingers close to the cutting edge, so these are to keep a handle features half-round work. The wide, comfortable intricate rolling it from prevent spot to index the tool in your hand and flat Cutting Linoleum Standard, in available Handle Palm bench. your off Carving Set and Microminiature Set, Mini Carving Set, Subminiature that cylindrical handle Conventional Carving Set. Straight Handle - around. hand you can wrap your entire Handle Straight and Standard Handle Palm SPECS: Subminiature CarvingSubminiature Set – 3 skew, skew, veiner, veiner, Microminiature Carving chisel. Microminiature Set bent (6.4mm)) gouge, (6.4mm)) #100-011-217AT #100-011-218AT #100-011-215AT #100-011-216AT #100-004-976AT #100-004-975AT well at straightening lines in hard to reach spots, and tracks well over spots, and tracks to reach lines in hard straightening well at run true. All tools are straight lines that convex surfaces, giving you push or pull models. in either available ing lines easy. Designed to cre Designed to ing lines easy. lines, the crisp precise, ate job at It also does a fantastic areas. to reach monds to point in hard The medium length cutting radii in borders. SPECS: carbide checkering tools have tools have carbide checkering handles wooden comfortable make to shapes special and 90° checker cutting straight, cutter is ideal for layout for 1 cutter is ideal Type lines. Used for and straightening the tight spots, reaching #100-017-455AT #100-017-456AT #100-017-457AT #100-017-590AT #100-017-591AT #100-017-454AT - order on the web $ 87.99 $ 593.99 brownells.com

�� " (6.35mm) Hard " (6.35mm)

4 / �� 1 ab Henckel Gouges, (1) Henckel " (3.8cm) wide. " (3.8cm) 2 / 1 8K511A85 Blank Henckel Chisels, Henckel " (14.4mm) 8K72E56 16 / 9 " (14.4mm). " (14.4mm). 16 / 9 " (21cm) high, 1 4 / " (3.97mm), " (3.97mm), 1 32 / 5 " (9.5mm), " (9.5mm), 8 / 3 From A Semi-Inletted A Semi-Inletted From Stckmker Starter Set, Stckmker Checkering Cradle, Checkering Locks All Stocks In Best Position Stocks All Locks For No Strain Layout & Checkering & No Strain Layout For CHECKERING CRADLE CHECKERING All The Tools To Create A Finished Stock A Finished Create To Tools The All " (105cm) long, 8 2 / 1 " (3.97mm), " (3.97mm), STOCKMAKER’S STARTER SET STARTER STOCKMAKER’S Kit contains: 1 ea.; Kit contains: 41 32 / 5 (1) - 8" (20.3cm) Cabinet File. (2) - #3 File. (1) - 8" (20.3cm) Vulcanite rd. " (12.7mm) 2 / All the chisels, files, gouges, scrapers and other tools required and other tools required gouges, scrapers chisels, files, All the A cradle makes checkering so much easier - and the results so - and the results so much easier checkering A cradle makes 1 Acid Brushes. (1) Hand Carving Inletting Black. (2) - #1 of bottle Knife. (1) - #50 Patternmaker’s Rasp. (1) - File Handles. (1) - Curl Scraper Kit. (1) - #50 Patternmaker’s x x 4" (101.60cm) Mallet. (2) - 2" (50.80cm) Rawhide SPECS: SPECS: 1 ea.; sandpaper in 120, 220, 280 grit. 2 each, 220, sandpaper in 120, No-Fil Pads. 2 each, Adalox Felt Pencil. 600 grit. (1) “Marks-On-Anything” 400, Durite sandpaper in 320, to turn a rough-cut, semi-inletted blank into a finished gun stock. semi-inletted to turn a rough-cut, need to do the job selected all the tools you Support Staff Our Tech them purchasing of price the over 10% than more save right. You separately. #080-761-000AT gresses. Convenient also for stock inletting, sanding, staining and Convenient also for gresses. vise. Comes a sturdy to the bench, or lock into finishing. Bolt directly complete with all holders, bolts and instructions. SPECS: much better - that we have never met a professional stockmaker stockmaker never met a professional we have much better - that important the most of cradle! Two who did not use a checkering 1) It allows you to work cradle are: good checkering a advantages of the across checker the stock as you with both hands and rotate controlled the most comfortable, at the work area keeping pattern, trying to the clumsy and difficult task of position. This eliminates to the point of stock - sometimes almost a stationary work around from correctly the pattern following standing on your head - and kills the that wobble the back and forth 2) Prevents to border. border securely tools. If the stock is not the checkering cutting action of This movement lets the cutter cutter. held, it will move with the it almost impossible to cut straight, even the stock and makes “grab” rugged wood low in cost, of depth. Simple in design, uniform lines of up Adjustable to hold rifle stocks construction and highly practical. Mannlicher-style) except all stocks to 33" long (which will include without Holds the stock rigidly, and forends. and all shotgun stocks pro work the as stock the of turning permits yet finish, marring #080-026-000AT - - ab ab $ 7.99 25.99 25.99 $ 73.99 $ 25.99 $ 29.99 �� Straightens JOINTER Crooked Lines Crooked

ab - - �� ab 8K21L85 8K21G85 8K21M85 �� 4F27N04 GUNLINE 1D6N19 Create a no-slip gripping surface gripping no-slip a Create 800-741-0015

Fast Alternate To Checkering To Alternate Fast on a stock, forend or handgun grip handgun or forend stock, a on to lay out in far less time than it takes Sharply pointed an area. and checker cutting diamonds in 12, 16 or 20 lines " (22.2mm) cutting area. �� ack To Life To Back Checkering Old Bring 8 / 7 Bart Oil, STOCK & CHECKER OIL " (9.5mm) diameter. 5" (12.7cm) long. 5" (12.7cm) diameter. " (9.5mm) 8 / 3 60° Jointer Tool, Dem- 12 lpi Stippling Punch, 16 lpi Stippling Punch, 20 lpi Stippling Punch, 8K53G56 Checkering Restoration Kit, Restoration Checkering WOOD STIPPLING PUNCHES WOOD

Hi-carbon tool steel, 2 fl. oz. (59 ml) net contents jar. (59 ml) net contents 2 fl. oz. Steel, blued. Kit contains one each of the following: F1 cutter with handle and the following: one each of Kit contains CHECKERING RESTORATION KIT RESTORATION CHECKERING DEM-BART DEM-BART Comfortable wooden handle and hardened steel cutter give wooden handle and hardened Comfortable Waterproof, low sheen, London-type oil fin Waterproof, Restoring a vintage stock, or one that’s seen a lot of action in the action in seen a lot of one that’s Restoring a vintage stock, or

Seals & Protects Freshly Cut Checkering Freshly Protects Seals & Everything You Need To To Need EverythingYou SPECS: SPECS: you complete control when you need to straighten out checkering when you need to straighten out checkering you complete control Besides straightening, the tool course. off gone have which lines laying out the critical, intersecting, master lines. for is perfect #364-000-011AT SPECS: SPECS: cess and the wood is sealed and protected. Will cess and the wood is sealed and protected. not plug up the diamonds or become yellowish in time. Contains no silicas or pigment fillers. ish is ultra thin to soak in deep and seal the open Brush in, brush out ex checkering. poors after SPECS: SPECS: or fine patterns. coarse, medium per inch let you choose from #080-061-016AT #080-061-020AT #241-820-002AT #080-061-012AT

#080-000-363AT Orders/Tech: shank, 90° veiner, hand carving knife, 2 oz. (59ml) stock & checker oil, (59ml) stock & checker 2 oz. knife, hand carving shank, 90° veiner, instructions. nylon brush, and Gunline ruler, ring the wood. Complete instructions included. ring the wood. Complete instructions SPECS: tion. Also included are a Gunline Ruler for precise line spacing and precise a Gunline Ruler for tion. Also included are dust and grime without mar removing Nylon Brush for a Brownells duck blind or deer woods, just got a lot easier! We’ve put together put got a lot easier! We’ve duck blind or deer woods, just tools and oil you need to sharpen up dull, rounded has the a kit that a pre- Kit includes it back to life. bring and really checkering off single-line for F1 cutter with handle and shank assembled Dem-Bart lines and designs, intricate touching up a 90° veiner for restoration, lines, and a 2 ounce jar restoring for Hand Carving Knife a Brownells the final restora protecting Oil for & Checker Stock Dem-Bart of shaping/inletting tools 10/22 PERFORMANCE PARTS 10/22B EDDINPERFORMANCEG SUPPLIES PARTS STOCK1911 AUTO WORK #310-150-002AT #310-150-001AT #310-150-003AT SPECS: cutting headsizes. tools, each with twodifferent sized heads.Measurements given are tool steel, sharpened and ready to use. Instructions included. Three on thedirection of thegrain.”Precision-ground from toughalloy like apencilandworkfrom righttoleft,orleftright,depending letting scraperIhave everused,andIhave triedafew. Justhold (12.7mm). Octagon,1"(2.5cm) and Jerry Fishersays:“In 20 yearsof stockmakingthisisthebestin #772-000-001AT #191-202-910AT #772-000-002AT #191-205-820AT SPECS: Choose leftorrightcut. blade flat ontheworksurfacetocutperfectly straight,cleanedges. gives youcompletecontrol of thetool,andlongshaft helpskeep en. Comfortable handle als, easy touse, and sharp made withqualitymateri Flat - 14 tpi,8"(20.3cm) long, SPECS: Flat -12tpi,10"(25.4cm) long,1"(2.5cm) wide;Half- Round/ cheekpiece, etc.).Unusual,no-clogdesign. (cuts smoothcross grain, too)! Hold at a60°angletoedges(butt, will make “sawdust”cuts.Finesandingis usuallyallthat’s necessary at anincredible rate. Forfinishwork,theweightof thefilealone ing of combs,gripareas. Withheavy pressure, thewoodrolls off #360-313-841AT metals, plasticsandwood. knobs, around thewrist,tangandgrip.Great onhard rubber, soft shadowline cheekpieces,shapingcombsorschnables,inlettingbolt places easilywhere asquare-ended filejustwon’tfit.Fantastic for 2nd cutandflat 2ndcut.Becauseof specialshape,youcangetinto 4 different cuttingfaces:half-round bastard, flat bastard, half-round SPECS: at thepoints. Cut Clean, Perfect Edges Super sharp,hand Covers every operation from rough shaping to final contour Once you’vetriedthisfile,you’llknowwhyfolks loveit.Givesyou STOCK MAKINGSKEWCHISELS Steel shaft/blade, woodhandle.8 8" (20.3cm) long. Large, 1"(2.5cm) and

JERRY FISHER Octagon FisherScraper, Small FisherScraper, Large FisherScraper, Skew ChiselLeft, Skew ChiselRight, 1A39A99 Half-Rnd/Flat No-ClogFile, Flat No-ClogFile, 1 ab 4 Cutting Faces In OneFile / VULCANITE FILE Superb For Shaping Wood NO-CLOG FILES 2 Round Vulcanite File, HALF-ROUND ab ROYAL ARMS 1 / 2 - - - " (12.7mm) wideandtapersto 23 � 3 / / 32 4 " (19mm).Small, " (18.3mm) wide. 11 / 16 PAGE SCRAPERS " (17.5mm). 2G14D99 1A41P99 11 2G14C99 / 16 " (22.1cm)long. Used For Many Years 1C12K86 1C12I86

412 6C45I99 Famous stockmaker One Of The Best 1C12K86 5 � /

� 8 " (15.9mm) and � � � � � 1 / 8 " (3.2mm) $ 45.99 $ 14.99 $ 41.99 $ 14.01 14.99 39.99 14.01 14.01 By 1 / 2 - - " #772-100-001AT — Advise# #319-416-702AT #319-416-032AT #319-416-002AT #319-000-003AT #319-416-700AT #319-416-982AT #319-416-172AT #191-188-460AT #772-100-000AT #772-100-004AT #772-100-003AT #772-100-002AT #191-188-610AT (11.1mm). #49issecond cut,#50issmooth cut. sharpen. recesses. Hardened andheat treated toholdanedge,stilleasy job where tinyamountsof material mustberemoved from tight Curved scrapers.473" (12mm).Setincludes5tools. length. Chiselsavailableinright- orleft-handcut.Width:Straight and SPECS: just awhisker of wood. guard or rear tang recesses. SPECS: Teeth are coarserthantheWood Files. the mostusefulwoodraspfor “almost final”shapingandfinishing. problems, doesnotgougeintowoodorsnagcross-grain. Probably ers and friends. Theunusual tooth design eliminates most “filling” suggestion of many, manygoodgunsmithandstockmaker custom tang tofront. We have beenlookingfor thesefor manyyearsat the wider radiusalso.Edgesare cut(have teeth)andtaperslightlyfrom surface. Raspishalf-round shape,butslightly wider thanusual with is desired. Comesintwocuts,secondorsmooth,10"longcutting net Raspsmadeespeciallyfor woodfilingwhere asmoothfinish Of Wood In Very Tight Removes Thin Cuts PATTERNMAKERS’ CABINET RASPS STOCK # Finishes aninletting The famousNicholsonShoemakers’ and Patternmakers’ Cabi 1095 steel shaft1095 steel andblade,woodhandle.7 12 Places Chisels cutathinshaving of woodfrom around trigger 5 / STOCK INLETTING TOOLS STOCK INLETTING 8 " (19cm) overall length. (19cm) " FORSTER Favorite Of Professional Stockmakers Stockmaker’s Handscrews,9A15K39 Stock Tools Set, BladeScraper,Curved Straight BladeScraper, Left HandChisel, Right HandChisel, #50 CabinetRasp, #49 CabinetRasp, For Shaping & Finishing THREAD 1 1 6x1mm 10-32 1 1 1 / / / / / 4 4 4 4 4 ab "-32 "-25 "-28 "-22 "-30 SATISFACTION GUARANTEED ROYAL ARMS STOCKMAKER’S Scrapers get into tight recesses, remove Sold inpairsonly. Screw lengthsvaryfordifferent the guns. SPECS: stock toaction. makers for finalaccurate fittingof the Recommended byleadingstock Win 70 Springfld/Krag Wby MkV Sav 110;Dakota; Rem 700/721/722; Mauser 98 Enfield Sako Ruger 7 HANDSCREWS / Fast - PositiveSeating 8 2G59L99 " (22.2mm) wide, tapers to wide, (22.2mm) " Handles are 3"(7.6cm) long. 2G12I99 8K66A99 1A49F99 2G12H99 ® SINCE 1939 MarkII 2G12H99 2G12N99 ab � � FITS � � � 1 / 2 " (19cm)overall �

� �

$ 17.99 $ 49.99 $ 12.99 66.99 59.99 12.99 12.99 12.99 7 / 16 - - - - ′ handles have steel hoops to prevent splitting. Final honing is re hardened toRc61for superiorstrength andsharpness.Hornbeam Handle –approx. 4"(10.2cm) long, 4" (10.2cm) long,sweep/cutwidthgiveninpricelines (1"=25.4 mm); SPECS: quired prior touse. #080-076-500AT #080-076-375AT #080-076-250AT #080-076-050AT #080-076-037AT #080-076-025AT — Advise# #080-076-000AT SPECS: and that “whisker” of woodunderneath! ever designed for the fine, controlled removal of the inletting black ruin tooledgesasdoessandpaper. Withoutadoubt,thebesttool and dust;yetwon’twork-harden woodasdorasps,or leave gritto Just drawtoward youacross work.Makes themostbeautifulcurls zines. Notintendedtorough outbarrel channel,sodon’tbeardown. barrel channel.Flat onesperfect for fittingfloorplates, tangs,maga blade widths.Sizes smallenoughfor triggerhole;big enoughfor clearance underthehandlefor tightplaces.Available in2styles-3 Shaped for positivefingertipcontrol of bladethrufullstroke. Finger ity tempered toolsteel,withenoughhefttoeliminate any “flexing”. 1 tendency tofollow woodgrain,gougeordigin.Madeof bestqual / 2 " (12.7mm). Setincludesoneof each. Forged SteelHoldsIts Edge German steelchiselsare STOCK # STRAIGHT OUGE STRAIGHT OUGE STRAIGHT OUGE STRAIGHT CHISEL STRAIGHT CHISEL STRAIGHT V CURVED #541-000-011AT #541-000-008AT #541-000-006AT #541-000-005AT #541-000-004AT #541-000-013AT #541-000-001AT STRAIGHT OUGE #541-000-012AT Two styles:CurvedandStraight, 3sizes: Carbon steel,woodhandle.Dimensionsvary:Chisel–approx. TWO CHERRIESTWO CHISEL GOUGE -CHISEL Curl Scraper, each, Curl ScraperSet, ROBERT LARSON 12mm Strgt, 6mm Strgt, 4mm StrgtGouge, 14mm StrgtChisel, 4mm StrgtChisel, 6mm StrgtV-Chisel, 8mm Curved Gouge, 8mm Curved 10mm Strgt, FIT CURL SCRAPERS control of theedgeandalmostno the cuttingedge;yougetcomplete Handles are placedat rightanglesto fit that separates “Pros” from “duds”. sible curlof woodtogetthat exact Straight Straight Straight Curved Curved Curved STYLE 13 / 16 Made toremove thetiniestpos " (21mm)dia. 1D44M92 “Like It 8K113Q87 1D56I56 1D44J92 8K27G86 ab For That Final, 1D28K26 1D44Q92 Grew There” Fit 1D28F26 1 / 1D45P94 4 � 1D44E74 � " (6.3cm), � � � �

� � � � HARD 3 /

8 � " (9.5cm), $ 31.99 $ 129.99 SIZE 3 3 $ 64.99 1 1 1 1 $ 50.99 $ 50.99 $ 50.99 $ 32.99 $ 32.99 $ 52.99 $ 50.99 / / / / / / 4 4 2 2 8 8 Office/Tech: " " " " " " - - - - #364-700-000AT ready for barrel withoutgouging,raspingorfinalsanding.Cush free cut,shaves outexcess wood,leaves barrel channelsmoothand tools complete withhandlesandcutters. 11 perpak.Bbl.BeddingTool Setincludes 1" diameterreplacement cuttersare sold9perpak,allother sizes aresold SPECS: pressure. Afavorite withpros. angle toremove woodwithout“diggingin”regardless of amountof ioned-cutter designkeeps hardened steelcutterdiscsat correct — Advise# — Advise# — Advise# — Advise# #419-100-001AT #364-700-900AT #364-700-875AT #364-700-750AT #364-700-687AT #364-700-625AT #364-700-562AT #364-700-500AT #364-000-005AT #364-000-004AT #364-000-003AT #364-000-002AT #364-000-001AT (13.2mm) high.Includesinstructions. SPECS: barrel movement.Onlyminorinlettingof theforearm required. extension and gives you an adjustable tensioning screw to regulate pact shiftasbarrel heats up.Steel beddingblockattaches toreceiver — Advise# — Advise# three cutters,screws andpins. SPECS: mounted cuttersshave outwoodwithout“diggingin”. BEDDING TOOL STK# BARREL Cutting Head At Full Control Of All Times With STK# TOOL Perfect, chatter- All Cuts 10" (25.4cm) overall.Cutlengthapproximate 1 Steel, bluefinish.1.28"(3.2.cm) long,.74" (18.9mm) wide,.51" 8 1 / 2 OCTAGON BEDDINGTOOL " (21.6cm)" length Cut overall.

4F15A30 4F27K31 7 7 Replacement Cutters,except Barrel eddingTool, except Replacement Cutters,4F18E91 Octagon BeddingTool, 4F35Q99 BARREL BEDDING TOOL / / 8 8 " or1"Cutters,4F17I60 " or1"BarreleddingTool, 4F29M87�

Fine Tune TheB arrel ForConsistentAccuracy Barrel eddingTool Set, #1 Accurizer,

Stabilizes thebarrel toprevent pointof im 641-623-5401 HICKS DESIGNS � � STK# RPL.CUTTERS #364-701-900AT #364-701-500AT #364-701-687AT #364-701-625AT #364-701-562AT #364-701-750AT #364-000-009AT #364-701-875AT #364-000-010AT GUNLINE TTER PAK CUTTER STK# RPL ab GUNLINE ACCURIZER NA NA NA 9A51Q03 1 / 1 / 2

2 ", " (12.7mm)." handle, Includes 9 / � 16 ", � 4F133J30 5 7 / / 8 8 7 ", " &1", / RUGER #1 8 � 11 " & 1", " &1", 1 / / 16 4 � " (3.2cm). " and 1" (2.5cm) 7 13 3 11 1" (2.5cm) 7 3 11 5 9 1

/ / / / / / / / / Hand Work / 8 4 2 8 8 4 16 16 16 " (22.2mm) " (19mm) ab 16 " (12.7mm) " (22.2mm) " (19.0mm) " (15.9mm) Hours Of � " (14.3mm) " (17.5mm) " (20.6mm) " (17.5mm) 3 / Saves 4 Size Rubber Size " bedding $ 143.99 � $ 29.99 $ 38.99 $ 56.99 20.99 32.99 7 18.99 16.99 / 8 " and ab - - STOCK1911 AUTO WORK bedding supplies " - - - - - 8 / 5 9.15 9.99 ab 27.99 27.99 57.12 " wide, 18.99 16 $ 27.99 129.99 $ 58.95 / 5 $ 129.99 � 413

" (3.3cm) wide, " (3.3cm) 16 / 5

" (14.4mm) and " (14.4mm)

16 " (7.1cm) long. Pilot: long. Pilot: " (7.1cm) " (7.9mm) diameter. diameter. " (7.9mm) - �� / - - - - 16 9 3A26J53 16

�� / PAGE / �� 5 13 3A26B53 �� p & Simplifyp Pillar "(23.2cm) long, 1 "(23.2cm) 8 / 1 REMINGTON 700 REMINGTON Bedding Installations 9D58K95 8K15J44 �� 9D54I55 Piloted counterbores allow Piloted counterbores " (21cm) long, 1 4 Speed U / " (7.3cm) long. " (7.3cm) 1 8 / 7 you to accurately drill stocks drill stocks you to accurately pil holes for with existing screw " (6.3mm) and " (6.3mm) 4 " (6.3mm) shank. " (6.3mm) / 4 1 / �� 1 �� 8K9G15 9D9Q99 �� ab " (3.1mm) pilot hole. 2 pilot " (3.1mm) 8 / 1 GRAND MASTERS " Counterbore, " Pilot, " Counterbore, " Pilot, 16 8 16 4

/ / / / Rem 700/Wby Bedding Studs, Rem 3A26C53 Mauser 98 Bedding Studs, Win M70 Bedding Studs, SA Aluminum Bedding Block, 3B122G58 LA Aluminum Bedding Block, 3B122M58 9 5 1 5 .292" Ruger Pilot, BEDDING V-BLOCK BEDDING ab to Action Screws Action to ," (3.1mm) shank, ," (3.1mm) 8 / 1 AIRCRAFT COUNTERBORE AIRCRAFT Studs - Steel, natural finish. Bushings - Poly Studs - Steel, natural Aluminum, in-the-white. SA - 8 Counterbore: HSS Steel, Counterbore: Accuracy GUNWORKS WHIDDEN Easy-to-use system aligns the action with the Lightweight aluminum V- block eliminates receiver movement receiver eliminates block V- Lightweight aluminum For Improved Improved For For Professional Results Without Damage Damage Without Results Professional For " (1.8cm) high. 4.3 oz. (122g) weight. LA (122g) weight. oz. - 9 high. 4.3 " (1.8cm) fitting and bedding to stock. Requires weight. (128g) oz. " high. 4.5 BOLT ACTION RIFLE BEDDING STUDS RIFLE ACTION BOLT 4 4 Stabilizes Action Stabilizes / / out damaging the original screws. Polymer bush out damaging the original screws. action ings, two on each stud, seal the threaded out inlets to keep holes and bottom metal screw get from parts overflow and help prevent epoxy ting permanently bonded in the stock. Kits avail Winchester Remington 700/Weatherby, able for Mauser 98. and Model 70, SPECS: - Stainless Steel. 2 Washer/Nuts mer. chined ridges provide full contact and alignment with the receiver receiver and alignment with the full contact provide chined ridges similar bar of plus allows interchangeability without skim-bedding, Pre-drilled multiple rifles. can use one stock for actions, so you reled time-consuming ma and eliminate factory hole spacing to match adhesion allow superior bedding sides Serrated chining and fitting. all short action for Available installation. rock-solid the stock and a to (SA) and long action (LA) hinged inletted for Remington 700 stocks blind magazines. Fits right hand actions only. and floorplates SPECS: 3 3 Win M70 kit contains (3) studs, (3) washers and (6) hex Win M70 kit contains (2) studs, (2) washers and (4) hex nuts. nuts. Other kits contain bottom metal for a professional bedding job with a professional bottom metal for for improved accuracy from your Remington 700. Precision ma Precision 700. your Remington accuracy from improved for #713-000-098AT #713-000-097AT #100-004-040AT #713-000-096AT #100-004-039AT (15.8mm) diameter cutter, cutter, diameter (15.8mm) Carbon steel, lar bedding, with no fear of the cutter wandering. Interchangeable Interchangeable wandering. cutter the of fear no with bedding, lar allowing two cutters to do the versatility, increased pilots provide Pi quick and easy. adding pillar bedding blocks six. Makes work of most accommodate to in popular sizes available and cutters lots bedding needs. SPECS: Pilot fits Ruger 77 stocks. fits Ruger 77 Ruger Pilot .292" #549-884-407AT #549-890-220AT #549-890-216AT #080-000-018AT #549-884-365AT - - - - ab

® 39.97 10.99 10.99 89.95 14.99 45.99 $ 10.99 $ 24.99 $ 49.99 " (6.3cm) " (6.3cm) 2 " (9.5mm) " (9.5mm) / 8 1 Bedding arand & Garand / 3 ��

�� " (15.9mm) and " (15.9mm) 10/22 8 �� / ® �� 5 �� Specialized fix Specialized During M14/M1A Barrel M14/M1A Tension Tension Properly Center & �� 4F9H93 4F9Q93 4F9A93 tures ensure the ensure tures relationships correct and tension between Receiver and Barrel, dur group Trigger ing bedding. “U”-bar holds triggerguard ab 8K35Q00 " (17.5mm) wide. Garand " (17.5mm) 4F13K39 4F42J54 16 / 8K40B53 " (2.7cm) wide, " (2.7cm) - - - " (12.7mm), " (12.7mm), 11 2 16 / / 1 1 3Z22H18 " (3.8cm) diameter, 2 diameter, " (3.8cm) 2 / 1 CUSTOM RUGER �� GUNLINE " (4.1cm) long, " (4.1cm) 8 / 5 " (2.9cm) high, 1 " (2.9cm) 8 / Cutters, " Barrel Bed Jr. Cutters, " Barrel Bed Jr. 1 Cutters, " Barrel Bed Jr. 4 8 2 / / / Bedding System, Garand Bedding Kit, Bedding Kit, M1A/M14 Bedding Fixture Kit, Combination 8K73D17 1 5 3 Handle, Barrel Bed Jr. Set, Barrel Bedder Jr. BARREL BEDDER JR BEDDER BARREL BEDDING FIXTURES Accuracy ab " (1.1cm) diameter drill. For use with wood factory or custom 16 Aluminum bushing, adhesive-backed foam pressure pads. In pressure foam Aluminum bushing, adhesive-backed “U”-bar - Steel, 1 Steel 9" (22cm) long. Set in and cutters, wooden handle, shank / 7 BEDDING SYSTEM VOLQUARTSEN Stabilizes Action For Improved For Stabilizes Action Lightweight aluminum receiver bush receiver aluminum Lightweight Gunline’s unique, no-chatter disc cutting system on an inletting disc cutting system on an inletting no-chatter Gunline’s unique, " diameter drill with preset stop that al stop that " diameter drill with preset " (19mm) dia. 6 cutters per pak. " (19mm) dia. 6 Precise “Shaving” Cutters & Rasp Handle For Close-In Work Rasp Handle For Close-In & Cutters “Shaving” Precise 16 4 / / stocks. long. Kits include Loop, Spacer, Instructions. Combination Kit includes Instructions. Combination Spacer, long. Kits include Loop, instructions. Spacer, M1A/M14 M1 Spacer, “U”-bar, ing combines with a foam pressure pad to pad to pressure ing combines with a foam ac improved your action for help stabilize using Easy to install and eliminates curacy. parts leave can that bedding epoxy messy permanently bonded to the stock. Includes 7 the bushing. stock inletting for lows precise of variety a fit pads pressure size Different plus the combinations, stock and barrel a tight hold during continuous recoil. adhesive backing provides SPECS: SPECS: SPECS: SPECS: cludes Spacer - Aluminum, 1 Spacer partially open during bedding. Spacer centers barrel in channel and partially open during bedding. Spacer centers barrel positioning. stock-to-barrel uniform creates thick. M1A/M14 Spacer - Aluminum, Spacer 1 thick. M1A/M14 #080-727-000AT #080-727-014AT #930-000-055AT #080-727-001AT SPECS: SPECS: cutter paks, of and 3 sizes cludes 1 handle 3 rasp-style handle. Rubber cushioned cutter discs. Smooth, shaving- Rubber cushioned cutter rasp-style handle. type cut. #364-702-625AT #364-702-750AT #364-702-001AT #364-702-000AT #364-702-500AT " - order on the web 2 / 1 31.99 26.99 26.99 23.99 $ 31.99 19.99 19.99 23.99

brownells.com

�� " (11.4cm) x 5 " (11.4cm) 2 / 1 5L13L35 ® �� 5L13E35 ab �� 5L16A49 5L16E49 Brown GLASBED Kit, Non-Flammable, 5L19F67 Black GLASBED Kit, Traditional, 5L23I18 Brown GLASBED Kit, Traditional, 5L23H12 Black GLASBED Kit, Non-Flammable, 5L19J45 Brown GLASBED Kits, Non- Flammable, per each, Traditional, per Black GLASBED Kits, Traditional, each, per Brown GLASBED Kits, Traditional, each, Black GLAS BED Kits, Non-Flammable, per each, IS OUR GUARANTEE!! OUR IS If you’re GLASIf you’re a guns, one at BED bedding one gun or a lot of Your choice of Traditional or Non-Flammable Release Agent. or Non-Flammable Traditional choice of Your - 6 or More - - 6 or More - - 6 or More - - 6 or More - GLASBED #081-050-002AT time, this is for you. Easy, no-mess, no-waste mixing...stay-in- one- no-mess, no-waste you. Easy, time, this is for and pot life molecular structure...long spot feature...sophisticated complete guarantee your stock bedding. We no-fear curing time for 100% - period. satisfaction, inletting to the metal”. The brown is a nice, medium, “walnutty” inletting to the metal”. The brown stocks. blends well with most popular wood shade that • we can ship the Non-Flam however, equally effective, Both are the mable version by air if you need it fast, or if you live outside Continental U.S.! #081-050-100AT #081-050-101AT #081-050-001AT GLAS with Hardener (30 ml) Resin, 1 fl. oz. BED KIt - Includes 1 fl. oz. or Non-Flammable), in, 4cc Release Agent (Traditional Dye mixed 4 swabs, Two Release Agent Application Two (13.9cm) square sheets of Sandpaper to roughen stock surfaces, to roughen Sandpaper sheets of square (13.9cm) Instructions. and Complete, Illustrated sticks Spreader Two - - - - GLAS bedding divider and divider USE minutes. When the 800-741-0015

We took our time-proven ACRA took our time-proven We 100% SATISFACTION P MIXING NO-CUP • TTER-SMOOTH CONSISTENCY BUTTER-SMOOTH YOUR YOUR N, UN, • PRE-COLORED • READY TO TO READY • PRE-COLORED • TH NYLON EPOXY NYLON GTH SUPER-STREN •

formulation and made it in two colors: fiberglass-stock-black fiberglass-stock-black and made it in two colors: formulation ® GLAS the “black magic” stage stock bedding out of BED takes GLAS the gun owner single best choice for bedding is the BED

20 minute “pot life” gives you more time to do the actual time to do the actual gives you more 20 minute “pot life” Supplied in your choice of pre-dyed colors, either black or pre-dyed Supplied in your choice of The Easy-To-Knead formulation of GLASBED bedding and the of formulation The Easy-To-Knead A unique, stable, molecular lattice structure that will not crack, that structure A unique, stable, molecular lattice Less than 1⁄10 of 1% shrinkage so the tight fit needed for best so the tight fit needed for 1% shrinkage Less than 1⁄10 of Nylon Derivatives are formulated in GLASBED bedding, giving formulated are Nylon Derivatives A Butter-smooth consistency that won’t run, drip or leach out consistency that A Butter-smooth Longer cure time - The exclusive, controlled molecular struc controlled time - The exclusive, Longer cure • NO-R • or gunstock-walnut-brown. Then, we packaged it in a neat, divided, it in a neat, Then, we packaged or gunstock-walnut-brown. get You serves as its own mixing container. that “bag” polypropylene to mix and bed and hardner resin pre-measured the right amount of No cups or spoons to clean lot left over. one sporter stock without a our traditional bottle of a of your choice get You to spill. no dye and allows version, which Non-Flammable Release Agent or our new, us to ship GLAS a Also included are BED by air if you need it NOW! to apply the Release Agent with, some Sandpaper Swabs couple of inside the stock and help get the wood or fiberglass to rough-up or stock finish left in the inletting, plus two any mold releases rid of you put the GLAS to let sticks Spreader you bedding everywhere BED easy-to-under want it. Then, we include our detailed, illustrated, • four together for and hardener squish the resin the open and squeeze the bag mixing is done, cut one corner of GLASBED bedding out into the stock. mixed brown. The black matches black synthetic stocks and “brings the and “brings black synthetic stocks The black matches brown. • unique packaging makes for easy mixing. Just pull the pull Just mixing. easy for makes packaging unique to cracks resistance bedding gives exceptional GLASBED of ture when fully cured. and stress • craze or “sugar-out” as will other 1-to-1 epoxies which do not have which do not have as will other 1-to-1 epoxies or “sugar-out” craze this structure. • accuracy stays that way - TIGHT! accuracy stays that • superb “thin strength”, shock resistance and stability over normal shock resistance superb “thin strength”, extremes. temperature • • being placed in the stock. after between wood and metal from and makes it truly user-friendly for everyone — especially the first- for it truly user-friendly and makes And, it’s loaded with all the best features: timer. stand Instructions that walk you through the process, step-by-step, the process, walk you through stand Instructions that get everything you need to so every stock you bed will be right. You compact package. GLASBED bed a stock in one handy, ing involved, and nothing to clean up afterwards. The proportions The proportions clean up afterwards. ing involved, and nothing to and the working time is long a mistake, exact so you can’t make are positioned even a novice “bedder” to get everything enough for the GLASBED bedding begins to set up. Plus, long before correctly the busy shop for it a natural use make the convenience and ease of and experienced stock man. tency that only GLAS that tency customers whose dealer can; the BED bedding way to bed their rifles most “goof-proof” the easiest, looking for are and accurizing guns with black fiberglass or the gunsmith restocking no measur There’s time saver! It’s a real or traditional wood stocks. GEL who wants to give his gun the accuracy and shot-to-shot consis who wants to give his gun the • with no fear that the epoxy will set up before you’re done. Especially you’re will set up before the epoxy that with no fear the first-time user. nice for Orders/Tech: 10/22 PERFORMANCE PARTS 10/22B EDDINPERFORMANCEG SUPPLIES PARTS STOCK1911 AUTO WORK its primepurposeistoaccurize arifle. dealers, stock manufacturers and gunsmiths - but the factremains: Granted, itisasuperiorbeddingcompoundusedandsoldassuchby for theexclusive purposeof makingarifleshootmore accurately. the action-good,strong, andreliable beddingitis,too.” hours. Whenthemetalisremoved, theresult isperfect beddingfor with release agentcomingwiththekit)andsetasidefor about24 gets madewhensightingintheirgameriflesafter usingACRA the woodwellwithACRA blank yousimplycutouttoomuchwoodallthewayaround, gob accuracy.” and there-vitalized rifleshouldrespond withconsiderablybetter willbefound anexcellent preparation tocorrectLAS poorbedding using thesamematerials asintheKit. aged, orifanimproper jobisdonethefirsttime,itcaneasilybefixed Thus, it makes the perfect recoil shoulder. Should it ever be dam qualities, resists alkalies andwillnotrot ordeteriorate. own great strength and resistance tobreakage orwarpage! there inthe ACRA barrel and actionthat anystampingmarks inthesteelwillalsobe ding job,thebetterjob.Soperfectly doesACRA the manyunusualfeatures of ACRA the aircraft industry. Thesewehave adaptedtogunwork.Someof guns…and of thehunterswhohave sentus“before andafter” tar won bigbore regional andPerrymatches withACRA proud, too, of themanyindividualshootersandteamswhohave chemical action.So,ahard surfaceindicates ahard interiorready This isveryimportanttoyouasashooter, for thetighteryourbed To quoteL.R.W. inthe ACRA As themanufacturers of ACRA “It’s aboonfor thelazy, too,becauseifyouare inlettingastock 5) -U 4) -ACRA 3) -ACRA 2) -ACRA 1) -ACRA The basicmaterials usedinACRA

nlike paints or air drying plastics,ACRA nlike paintsorairdrying asitsnameimplies,isanaccurizingmaterial designed GLAS, LAS shrinkslessthan1/10thof1%whenhardening. GLAS LAS isacidproof, waterproof,GLAS hassuperiorinsulating LAS actuallystrengthensyourstockbecauseof its GLAS LAS ishighlyresistant toimpact and will not dent. GLAS …impossible to“Bed” anycloser.GLAS “THE AMERICANRIFLEMAN” “THE SUPERIOR STRENGTH PROVEN IN THE FIELD American Rifleman “Dope Bag”,“ACRA GLAS ® , putthemetalin(properly treated wecannothelpbutbevery GLAS, PAGE are: GLAS are those developedfor GLAS

414 LAS hardensby GLAS fityour GLAS sed GLAS GLAS. G - - - - and for resale todealerandretail accounts. agent inahurry. shipments toarrivewhen you need an ACRA inside andoutsidetheContinentalU.S.; nomore waitingfor ground be transported byair, immediately upon request, safely and legally bedding compoundandmetal.Non-Flammable ReleaseAgentcan same manner. Both form a smooth, vinyl-like coating between the indentical physicalcharacteristics,andare appliedinexactlythe stock butnottothebarreled action.Bothproducts present nearly Flammable ReleaseAgentselectivelyletsACRA himself -andwantsthe bestresults. manufacturers…a great boonfor themanwholikes todo the job ding barreled actionsintoinlettedstocks purchased from stock the fulltimestockmaker. the super-duper stockwhere thesametechniquesare usedasby plete inlettingjob,theaccurizingof anerratic shooting gunandfor tip oncertainjobs. ding around receivers, at thechamberonbarrel andat theforend There are ajillion glues butonlyoneACRA tofixit!But,weplaythisdown.We areLAS notinthegluebusiness. G that hasbeenbustedandsomeoneundoubtedlyusedACRA without number. What itamountstoisthis:You namesomething skis, sleds, tables, and gun stocks chairs, cribs, cars, radios, TV’s, tomers have repaired everythingfrom falseteeth,toiletbowls,pipes, letters inourfilesmake oneshake hisheadinwonder. Itseemscus ally stick“anything toanything”(except certainpoly-plastics).The of theirgunsbeingAccurized withACRA Check amongyourshootingfriendsandnotehowmanyare proud your gun,yougetthesatisfaction of having donethejobyourself. reled benefitwhenusingACRA take yourtimeanddotheFirstClassJobyouare capableof doing. inletted stock before it starts to harden. There’s no needto rush, so youhave ample time to properly seat the barreled action inthe before then. hardness in48hours,altho’itcanbeworked, sandedandfinished perature. Itthen“kicks over”andbeginstoharden, reaching full for finishing.Themixture becomeshotbefore reaching settingtem - Thebondingstrength of ACRA or tobedandaccurize gunstheyare stocking; also,tosimplifybed ruin thewood. dirty lookingwhere allowedtosoakinand,rare cases,actually Oils andsolventswilleventuallymake themostbeautifulof woods twist, forcing theguntoshootdifferent groups ondifferent days. being absorbedbythestockcancausefinestwoodstowarpor stock againstallmoisture, gunoils,solventsandsprays.Moisture PROFESSIONAL STOCKMAKERS: -Forobtainingskin-tightbed STOCK MAN UFACTURERS: -Forspecialcustomaccurizingjobs Our traditionalReleaseAgentandournew, easy-to-ship,Non- GUN HOBB GUNSMITHS: -Forthecompletegamutof stockwork-thecom 8) - 7) -ACRA 6) - ACRA 10) -ACRA 9) -ACRA Being a superior bedding compound, you get a double- bar • • • hasbeencompoundedbyourresearch engineers GLAS LAS has a shelflifeofover5 years! GLAS LAS hasanotherfeature that isstrictlyasidebenefit GLAS INCL ACCURIZE WITHACRA EASY-TO- LAS completelysealstheinlettedsideof thegun GLAS YISTS ANDBUFFS:-To accurize theirpresent guns UGH STOCK PROTECTION”“THORO WHO LACK DYESUDES BROWN &BLACK ACRAGLAS BONDING STRENGTH USES ACRA SATISFACTION GUARANTEED RELEASE A USE KIT -Inadditiontoaccurizing GLAS: isphenomenal-willactu GLAS LAS AND WHY GLAS GENT SINCE 1939 GLAS. GLAS! kit or extrarelease GLAS GLAS bondtothe GLAS ® ------Brown Dye,BlackDyeenoughtobed2Rifles.CompleteInstruc tions. 7 ACRA 5 Paks BlackDyeandInstructions. oz. capacityMixingCups,50Sticks, 5Packets Brown Dye, Hardener, 3fl. oz. (89ml)ReleaseAgent,8oz. (227g)Floc,24 3 ACRA We guaranteeACRA Kit. Thesetellyouhowtomixanduse.FOLLOW THEMCAREFULLY. a first-rate ’glassbeddingjob. to theirgunandmake sure othersknowthey’vetaken thetimetodo contrast at thejoiningof barrel andstocktoaddapointof distinction But, youdon’thave tomatch thecolor, manyshooterslike tocreate the cupwilldarken somewhat whentheACRA out thedyefor aclosermatch. Justremember, thecoloryouseein light walnut,ormaple,myrtle,cherry, etc.,youmaywanttoleave nicely matches “normal”walnutbutifyourstockisexceptionally color of yourindividualstock-woodorsynthetic.Thebrown dye them youcancolortheACRA or brown -wefurnishtwospecial,acrylicdyeswitheachKit.With #081-003-004AT #081-005-030AT #081-003-065AT #081-005-120AT #081-005-029AT #081-005-121AT #081-007-004AT #081-005-122AT #081-007-003AT #081-007-032AT #081-007-033AT #081-009-016AT #081-010-012AT #081-001-050AT #081-003-002AT #083-001-005AT #081-005-028AT #081-003-064AT #083-001-000AT / 8 fl.oz. (26ml)ReleaseAgent,Floc,2MixingCups,Stick, Complete, easy-to-follow Instructionsare packaged witheach ACRA • SIMPLIFIES G INLETTIN • • KIT-2fl.oz. (59ml)Resin, GLAS SHOPKIT-28fl.oz. (828ml)Resin,7fl.oz. (207ml) GLAS isamber-clear.GLAS To make itmatch yourstock-black ACID & WATERPROOF STRENGTHENS STOCK ACRA ACRA 1H84C14 Acraglas Hardener, 28 oz.AcraglasResin and7oz. ACRA ACRA 1H21Q60 ACRA Acraglas Hardener, 120 oz.AcraglasResin and30oz. 1H22A03 7 oz.AcraglasHardener, 1H46J64 28 oz.AcraglasResin, 1H145F17 120 oz.AcraglasResin, 1H4M86 3 oz.BottleRelease Agent, 1H48P03 30 oz.AcraglasHardener, Release Agent, 3 oz.BottleNon-Flammable Acraglas, Acraglas, Release Agent, Quart BottleNon-Flammable Qt BottleRelease Agent, 1H1G96 Graduated MixingCups,1dozen, Fiber GlassFloc, 50 MixingSticks, Black Dye,5packets, Brown Dye,5packets, INSTR 100%. GLAS ACRAGLAS PRICES ACRAGLAS GLAS LAS Kit, GLAS LAS ShopKit,Non-Flammable, GLAS ShopKit, GLAS Kit,Non-Flammable, GLAS UCTIONS AND COLOR � � � � � � � � BULK Q mixtoblendproperly withthe GLAS ab

1H4L86 1H20K20 5L7Q82 1H4D64 ANTITIES 1H62Q81 1H175K77 7 /

8 1H84K13 3H4F78 fl.oz. (26ml)Hardener,

3H4M82 �

� � 1H22N24 1H22C18

� isinthestock. GLAS

� � � � �

� �

$ 24.99 164.99 $ 99.99 $ 69.99 199.99 24.99 54.99 99.99 26.99 50.99 29.99 29.99 Office/Tech: 2.49 9.99 5.99 5.99 5.99 5.99 5.99 - #080-911-098AT #804-000-009AT #080-000-417AT #080-000-418AT #080-000-419AT Long sleeve1 diameter center hole(letterdrillsize N).Shortsleeve1"(2.5cm) nominal. rear, triggerguard screw ferrule that pre Machined upperandlowerplates are contoured tofittheinlet SPECS: SPECS: screw application. stock screws. Can be shortened for front rifle actionthat uses.250"diameter, rear tions and can be easily adapted to fit any wall, stainlesssteelferrule fitsallM98ac Perfect for fast,pillarbedding;ourheavy- curacy andkept thestockfrom splitting. vented overtightening,maintainedac plate; (2)drillbushings- includes: (2)LA/SAupperplates; (2)BDLLA/SAlowerplates; (1)ADLlower SPECS: 9 ing. FitsRem.700BDL/ADLlongactionandshortstocks. For strength, steelAllenheadscrews toprevent movementwhendrill ting of thestockfor addedsupportandare heldtogetherwithhigh Sold 2ea. .375"long, (9.5mm)OD, ID.(7mm) .279" frequent disassemblywon’tloosenthesesleeves. gripping area for beddingepoxy toguaranteethat eventhemost or Combo of 1each.Instructionsincluded. Ends Stock Crush, Increases Accuracy / 16 " diameterpillarsonly. A modern update of theoriginal M98 Jig -6061Aluminum,natural finish.Bushings/screws -steel.Kit Machined aluminum. 304S seamlesstubing.1 PILLAR BEDDINGSLEEVES PILLAR SCORE HIGH 1 / 2 " (3.8cm) nominal.Cuttofit.Soldinpairs of Long, Short, PILLAR DRILLING JIG PILLAR M98 StockFerrules, 9 Pillar BeddingSleeveCombo, Long PillarBeddingSleeves, Short PillarBeddingSleeves, ab / Ultimate Action-To-Wood Fit For Superb 16 " PillarDrillingJig, STOCK FERRULES

9 / 641-623-5401 16 "; (1) ab 9 sleeves provide arock-solid fitbe epoxies. Exteriorgrooves maximize with ACRAGLAS® familyof bedding methods, thesesleevesworkbest than traditionalstock-to-metal fitting ing ortarget rifle.Far more stable maximize accuracyfrom yourhunt tween bottommetalandactionto / Sporting RifleAccuracy 9 16 / 1 16 " (14mm) diametersleeve,.3" (7.5mm) / " dia.drill;alignment tool. 4 REMINGTON 700 " (3.1cm) Strong, lightweightaluminum

- - - stocks for beddingpil to inletRemington700 making off-center holes. wandering off trackand for easydrillingwithout with hardened steelguides piece, aluminumfixture screws. Heavy duty, two- alignment withtheaction lars andensure precise 8K5J49 MAUSER 98 4K249J99 For Precise A quickandeasyway Pillar Alignment 8K9M67 � � 8K9B67 8K9L67 ab � Bedding � � $ 249.99 � $ 11.99 $ 6.99 11.99 11.99 - - - - - G10 PILLAR ® BEDDING SLEEVES ADJUSTABLE PILLAR BEDDING KITS ACRAGLAS GEL STOCK WORK Stable In Hot & Cold Weather; • NYLON EPOXY DERIVATIVE Easy To Machine • buTTER-SMOOTH CONSISTENCY Machined fiberglass bedding sleeves provide a solid fit between • MIXES WITH ATOMIZED METALS bottom metal and action to maximize accuracy from a hunting or • INCLUDES BROWN & BLACK DYES target rifle. G10 can’t corrode and is highly resistant to dimensional Over the years we had hundreds of customer requests for an ep- changes from extreme heat or cold Application gun sold separately oxy accurizing compound with a butter-smooth consistency which conditions, so these sleeves won’t shift due to temperature fluctua- would neither run, drip or leach out from between wood and metal tions. Easy to machine for custom stock work and fitting to Rem- Fast, Mistake-Proof Pillar Bedding after being placed in the gun stock. After many years of research and ington or round-bottom actions. Work best when installed using testing, we perfected a modified version of our popular ACRAGLAS® Brownells ACRAGLAS® family of bedding epoxies. Exterior grooves Convenient kit contains everything you need to pillar bed one that gives the same super accurizing bedding job and also meets maximize gripping area for epoxy to guarantee that even frequent bolt action rifle. Includes our aluminum Adjustable Pillar Bedding those specialized smooth application features you have asked for. disassembly won’t loosen these sleeves. ab Sleeves with threaded steel sleeves that allow precise adjustment to In formulating ACRAGLAS GEL, we took advantage of the latest 9 SPECS: Machined G10 fiberglass. /16" (14mm) O.D., .3" (7.5mm) diameter fit individual rifles, eliminating the need to specially machine a set of epoxy technology to create a butter-smooth type of ACRAGLAS: - center hole (letter drill size N). Short - 1" (2.5cm) nominal length; Long pillars for each rifle. Reversible design allows sleeves to be used in • Nylon Derivatives are formulated in ACRAGLAS GEL, giving vast- 1 - 1 /2" (3.8cm) nominal length. Cut to fit. Instructions included. Sold 1 flat- or round-bottomed receivers. The pre-colored (brown) ACRA- ly greater “thin strength”, shock resistance and stability over normal per pak. BED™ bedding compound comes in a convenient, easy-to-use car- temperature extremes. tridge application system. For your first bedding project, purchase #080-000-742AT Short G10 Pillar Bedding Sleeve, • Slightly less shrinkage than that of ACRAGLAS, which has an b eddin g s u pplies 8K12F73 �� $ 14.99 the reusable Application Gun separately, then for future jobs, just 9 amazing 1/10th of 1%. aluminum; STAINLESS STEEL - All the attributes of steel particles but purchase a new Bedding Kit. Kit also available with a /16" Forstner- #080-000-743AT Long G10 Pillar Bedding Sleeve, type drill bit to cut the recesses in the stock for the sleeves. ab • 1-to-1 mixing ratio gives a stable, molecular lattice structure to with a medium gray finish and no fear of rust formation on surface 8K12F85 �� 14.99 SPECS: Application Gun must be purchased separately. Kit #1 contains 2 ACRAGLAS GEL that will not crack, craze or sugar-out as will other of bedding. ab bedding sleeves, 1.6 fl. oz. (50ml) brown ACRA-BED™ cartridge, 2 mixing 1-to-1 epoxies which do not have this structure. Further, 1-to-1 mix ACRAGLAS GEL PRICES 7 ratio, by volume, simplifies mixing and measuring small amounts tips, /8 fl. oz. (26ml) release agent, 4 oz. (113g) modeling clay, 2 application accurately. ACRAGLAS GEL KIT - 2 fl. oz. (59 ml) Resin, 2 fl. oz. (59 ml) Hard- 7 sticks, 2 brushes, and instructions. Kit #2 contains everything in Kit #1 plus ener, /8 fl. oz. (26 ml) Release Agent, Measuring Spoon, re-useable 9 3 /16" (14.2mm) dia. wood drill with /8" (4.7mm) dia. shank. • Slightly longer pot life to give the user more time when doing the actual bedding. Poly Mixing Dish, Mixing Stick, Brown Dye, Black Dye and Com- HOLLAND REMINGTON 700 #081-060-003AT Pillar Bedding Kit #1, 1H52D94 �� $ 57.99 plete Instructions. • Longer cure time - The molecular structure of ACRAGLAS GEL BEDDING PILLAR SYSTEM #081-060-004AT Pillar Bedding Kit #2, 1H74L96 �� 84.99 has been controlled so that for the first few hours after the epoxy #081-014-004AT ACRAGLAS GEL 4 oz. Kit, 1H24L68 �� $ 29.99 #081-000-021AT Application Gun, 1E26M59 �� 29.99 sets it remains slightly flexible, making it easy to trim away excess #081-014-007AT ACRAGLAS GEL 4 oz. Kit, 9 Self Centering Action Screws #080-060-562AT /16" Wood Drill, 8K32Q18 �� 36.99 compound. Non-Flammable, 1H30D53 �� 34.95 Improve Accuracy #081-000-029AT Mixing Tips, 5-pak, 1E7Q52 �� 9.00 • Readily blends with atomized metal particles, making it possible ACRAGLAS GEL SHOP KIT: - 8 fl. oz. (237 ml) Resin, 8 fl. oz. (237 ml) for the user to create his own reinforced epoxy whenever such type Hardener, 3 fl. oz. (89 ml) Release Agent, Measuring Spoon Set, 2 82°, tapered-head action epoxy is desired. re-useable Poly Mixing Dishes, 25 Wide Mixing Sticks, 3 Paks Brown screws self-center within the • Can be dyed the same as ACRAGLAS to match the characteristics Dye, 3 Packets Black Dye, Instructions. bedding pillar; keeps screw shank of the gun stock being worked on. #081-017-016AT ACRAGLAS GEL 16 oz. Shop Kit, from touching pillar and ruining 1H53H10 �� $ 64.99 accuracy. Hex head screws allow The above features of ACRAGLAS GEL give you an idea of how for precise torquing; great looks. completely we fulfilled your requests for a companion product for #081-017-017AT ACRAGLAS GEL 16 oz. Shop Kit, Pillars are counterbored to recess PILOTED FORSTNER BIT ACRAGLAS…The ACRAGLAS GEL stay-in-one-spot feature…so- Non-Flammable, 1H53I74 �� 65.99 phisticated molecular structure…slightly longer pot life and curing screw heads below the level of the stock for added protection from BULK QUANTITIES damage. Bedding pillars feature deep epoxy grooves that hold extra time…the ability to mix in metal, make this a product we are proud bedding material for a super strong bond. ab to offer and which, of course, we guarantee 100% as to quality of #081-015-004AT 4 oz. ACRAGLAS GEL 2 oz. Resin & 2 product, or your money back. oz. Hardener, only, 1H13J13 �� $ 14.99 SPECS: Aluminum. 613" (15.5mm) diameter. .256" (6.5mm) diameter Drill Holes For Pillar Bedding Without A Jig hole. ADL: 1.4" (3.5cm) and 1.3" (3.2cm) long. BDL: .85" (.21.6mm) and RELEASE AGENT #081-017-116AT 16 oz. ACRAGLAS GEL, 8 oz. Resin & 8 1.4" (3.5cm) long.Steel screws, black oxide finish. Self-piloted bit cuts straight and clean; opens up existing stock Our traditional Release Agent and our easy-to-ship, Non-Flam- oz. Hardener, only, 1H40J17 �� 44.99 9 #403-000-012AT ADL Bedding System, 3K40J00 �� $ 40.00 screw holes to accept /16" diameter bedding pillars. ab mable Release Agent selectively lets ACRAGLAS GEL bond to the #081-017-117AT 8 oz. Resin, 1E23D53 �� 26.99 9 1 SPECS: Steel, blue. Bit - 5" (12cm) long, /16" (14mm) diameter, /2" (12mm) stock but not to the barreled action. Both products present nearly #081-017-118AT 8 oz. Hardener, 1E21P42 �� 24.99 #403-000-017AT BDL Bedding System, 3K40F00 �� 40.00 1 dia. shank. Pilot - 1 /2" (3.8cm) long, .312" (7.9mm) dia. identical physical characteristics, and are applied in exactly the same #081-017-128AT 1 Gallon ACRAGLAS GEL 64 oz. Resin #080-909-000AT Piloted Forstner Bit, 8K91P19 �� $ 109.99 manner to form a smooth, vinyl-like coating between the bedding & 64 oz. Hardener, only, 1H152H17 �� 159.99 compound and metal. Non-Flammable 27.95 Release Agent can be transported by air, immediately upon request, safely and legally #081-017-129AT 64 oz. Resin, 1H77B68 �� 89.99 inside and outside the Continental U. S.; no waiting for ground ship- #081-017-130AT 64 oz. Hardener, 1H77L69 �� 89.99 ments to arrive when you need an ACRAGLAS GEL kit, or extra re- #081-007-003AT 3 oz. Bottle Release Agent, 1H4M86 �� 5.99 lease agent, in a hurry. RUGER® 77/M77® MARK II #081-007-004AT 3 oz. Bottle Non-Flammable Acraglas, ADJUSTABLE PILLAR USING GLASS FLOC Release Agent, 1H4L86 �� 5.99 BEDDING PILLARS The advantages of glass floc are already incorporated in the lat- #081-007-032AT Qt Bottle Release Agent, 1H22C18 �� 29.99 BEDDING SLEEVES tice, molecular structure of ACRAGLAS GEL, so the addition of floc #081-007-033AT Quart Bottle Non-Flammable Faster, Easier & More Precise is not recommended or needed. Inventory Just Two Sleeves & Acraglas, Release Agent, 1H22N24 �� 29.99 Bedding ATOMIZED METALS Fit All Types Of Stocks #081-000-044AT Measuring Spoon Set, 8F2H51 �� 3.99 Pre-machined aluminum pillars Atomized (finely powdered) metals can be added to ACRAGLAS #081-020-006AT 6 oz. ACRAGLAS GEL Mixing Dishes, GEL to increase both tensile and compression strength, along with Contoured adjustment rings solve the difficult problem of bedding per 10, 1H7H88 �� 9.99 higher impact resistance. This feature allows you to duplex-bed move on a fully threaded shaft so Ruger bolt action centerfire rifles. The front pillar is cut to match the guns using reinforced ACRAGLAS GEL where the re¬coil lug con- #081-001-050AT 50 Mixing Sticks, 1H4D64 �� 5.99 you can size them for an exact fit 60 degree angle of the receiver screw; pre-notched with the correct tacts the bedding and un-reinforced ACRAGLAS GEL or ACRAGLAS #083-001-005AT Brown Dye, 5 packets, 3H4M82 �� 5.99 without cutting, filing or machin- contour and angles to fit against the bottom of the recoil lug and for the less stressed areas of the stock. Atomized metals can be #083-001-000AT Black Dye, 5 packets, 3H4F78 �� 5.99 ing. Sold as a pair, long for Rear screw, short for Front screw. ab set square with the floorplate hinge. Fits all Ruger 77 and M77 Mark 7 added in ratios from 1 part metal to 4 parts mixed bedding, up to #081-021-004AT Atomized Aluminum, 5 oz. (142 g) net SPECS: Sleeve - steel, .296" (7.5mm) ID, /16"-20 tpi. Adjustment Ring - alu- II rifles except VT target models. ab 1:1 ratio of metal to bedding mix. We offer five atomized metals: minum, .560" (14mm) OD. Front - .700" (17mm) long. Rear - 1.16" (2.9cm) SPECS: Aluminum, natural finish. Front - .600" (15.2mm) long, .535" weight, 1H11C68 �� 14.99 ALUMINUM - Very malleable with excellent machinability for easy long. Requires alterations to stock. Sold pairs only. (13.6mm) dia. Rear - 1.145" (2.9cm) long, .535" (13.6mm) dia. #081-021-104AT 12 oz. Atomized Steel, 1H20A36 �� 24.99 drilling, tapping, shaping; STEEL - Offers a full 10% increase in ten- #080-910-000AT Adjustable Pillar Bedding Sleeves, #080-000-007AT Ruger 77/M77 Mark II Bedding Pillars, sile and compression strength over un-reinforced bedding; requires #081-021-204AT Atomized Stainless Steel, 12 oz. (340 8K22P28 �� $ 25.99 8K11Q09 ��$ 13.99 metal working tools for trimming and shaping and is heavier than g) net weight, 1H16C51 �� 19.99

order on the web

Orders/Tech: 800-741-0015 brownells.com PAGE 415 STEEL BED™ ACRAGLAS® ACRA-QUICK™ & ACRA-20™ SOLVENT & THINNER Mixes Perfectly, STAINLESS STEEL-FILLED EPOXY, Hardens Fast, Holds RIFLE-BEDDING COMPOUND Great For Tool Cleanup & Special Mixes Like Iron Lets you thin all the Acra products to the exact Our revolutionary STEEL-BEARING consistency needed for each job. Thin Acraglas ACRAQUICK/ACRA-20 • Ultimate Bedding Compound For to “paint” the barrel channel for a moisture-proof Wood & Fiberglass Stocks family of two part ep- seal, or use as a super tough stock finish. Or, thin oxies is unmatched for mixture to fill cracks and voids. Great to clean up overruns from strength, hardening

STOCK WORK STOCK • 72% Stainless Steel For Superior Bedding Strength stock and metal. Clean tools and bench after a bedding job. Re- speed, and their ability moves unset Acra products from hands and clothes. Doesn’t affect • Shrinks Less Than 1/10 of 1% to bond to almost any hardened strength. Won’t soften Acra products once they set. ab material. They bond to • No-Run Formula SPECS: 1 quart (946ml) can. wood, metal, ceramics, #083-022-032AT Acraglas Solvent & Thinner, and most plastics with • 1-to-1 MIXING RATIO, Easy, Pre-measured System 5L17P66 ��$ 21.99 all the famous strength and holding power of ACRAGLAS. Once Or Use Measuring Spoon For Smaller Amounts cured, they’re virtually impervious to the effects of moisture, sun- light, frigid temperatures, solvents, detergents, and most chemicals. • Now With Black & Brown Dyes Unlike lesser adhesives, they will not shrink, crack, or weaken over time. All ACRA epoxy formulas harden strong enough to handle in • Stainless Steel Particles CAN’T RUST or CAUSE ACRA-WELD™ CARTRIDGES minutes and cure to full strength in 24 hours. And, they all dry clear. RUST On Adjacent Metal Standard ACRA-QUICK 3-MINUTE EPOXY has a mixed work- Because of the extremely high stainless steel content, it’s tough The Best Possible Epoxy In An ing time of 2-3 minutes and is strong enough to handle 5 minutes • WON’T Compress, Crumble Or “Sugar” Under to dye STEEL BED to match wood tones but, our latest dyes are so Easy-To-Use Applicator after application (at 70˚F). ACRA-QUICK and ACRA-20 are semi- Heaviest Semi-Automatic Or Magnum Recoil powerful that you can get a useable brown color for wood stocks fluid formulas that flow well, fill gaps, and get into those hard-to- The most sophisticated ep- Impact and a very good black for synthetics. Another choice is to paint reach spots. ACRA-20 has a longer, 15-20 minute working time and the STEEL BED along with the synthetic stock. If you want the best oxy compound yet formulated reaches handling strength in 60 minutes. It will set up in tempera- • Make Form-Fitting Vise Jaws possible color match on a wood stock, you can use STEEL BED for for repairing, restoring, filling and tures down to 0˚F, and it can be colored with any of our ACRAGLAS recoil lugs and pillar bedding and ACRAGLAS® or ACRAGLAS GEL® bonding wood, metal, concrete, dyes. ACRA-QUICK GEL sets up in 3-5 minutes, and their no-drip • Strengthen Barrel Channels (which are more easily dyed) in those places where the bedding glass, and ceramics. Our unique formulas are perfect for repairs where gravity works against you. will be visible. applicator gun makes it to apply All ACRA epoxies come with a reusable, no-mess, application • Repair Jigs & Fixtures Too the precise amount you need. gun that automatically blends the resin and hardener to a perfect STEEL BED really is the ultimate, steel bearing bedding com- Has many times the strength of 1-to-1 ratio as you apply it to the work area. ab pound. Besides being incredibly strong and tough, it’s very easy to polyesters and withstands vibra-

B EDDIN G S U PPLIES • Shim Scope Mounts For Perfect Fit To Receiver SPECS: Each kit contains: 1.6 fl. oz. (50 ml) epoxy cartridge (Acra-Quick, use. The mixing ratio is a simple, 1-part Resin to 1-part Hardener, tion, oils, practically all acids, sol- Acra-Quick Gel, or Acra-20, depending on kit), 2 mixing tips, 1 applica- • Pillar Bed Action & Floorplate by volume, and the creamy, no-run texture means STEEL BED will vents, and abrasion. Gap-filling tion gun. stay where it’s put. ba formula means parts do not have to fit perfectly for maximum bond. #081-000-023AT Acra-Quick Kit, 1H36M91 ��$ 41.95 • “Glue-In” Bedding Can be colored using our Water Soluble Dyes, Epoxy Black, or liquid 1 ® #081-000-025AT Acra-Quick Gel Kit, 1H36A91 �� 41.95 2 ab What is STEEL BED? Simply the most advanced, toughestever STEEL BED KIT - (1) 1 / fl. oz. (44 ml) net contents jar Resin; (1) ACRAGLAS Dyes. Working time of 15-20 minutes. 1 7 #081-000-024AT Acra-Quick 20 Kit, 1H39G45 �� 44.99 bedding and stabilizing, steel bearing, epoxy compound for wood 1 /2 fl. oz. (44 ml) net contents jar Hardener; (1) /8 oz. (26 ml) net SPECS: Set contains: 1 (one) 1.6 fl.oz. (50ml) ACRA-WELD cartridge, 2 contents jar Acraglas Non-Flammable™ Release Agent; (1) Mea- mixing tips and application gun. Refill Kit contains: 1 (one) 1.6 fl.oz. (50ml) and fiberglass gun stocks. Designed specifically for GUNS, to give REPLACEMENT ACRA PRODUCTS the incredible impact resistance that’s possible only by surrounding suring Spoon, (1) Re-useable Poly Mixing Dish, (2) Mixing Sticks (1) ACRA-WELD cartridge, 2 mixing tips. the action with a layer of solid, never-rust stainless steel and the Brown Dye Pak, (1) Black Dye Pak and (2) Release Agent Applica- #081-025-003AT ACRA-WELD Kit, 1H39E84 �� $ 44.99 #081-000-017AT 50 ml Acra-Quick w/2 Mixing Tips, skin-tight, epoxy-matrix fit so vital for superb accuracy. Through tors; Instructions. #081-025-004AT ACRA-WELD Refill Kit, 8K14N21 �� 15.99 1H14K13 �� $ 15.99 a unique blending process, there’s actually more stainless steel (by #081-040-003AT 2-Gun Steel Bed Kit, 5L40E44 �� $ 50.99 #081-000-021AT Application Gun, 1E26M59 �� 29.99 #081-000-018AT 50 ml Acra-20 w/2 Mixing Tips, 1 weight) than epoxy in STEEL BED - 2 /2 times more steel than in 1H11N82 �� 13.45 STEEL BED SHOP KIT: - (1) 8 fl. oz. (237 ml) net contents jar Resin; #081-000-029AT Mixing Tips, 5-pak, 1E7Q52 �� 9.00 competitive products. 7 #081-000-020AT 50 ml Acra-Quick Gel w/2 Mixing (1) 8 fl. oz. (237 ml) net contents jar Hardener; (1) /8 oz. (26 ml) net 1 Tips, 1H11E92 �� 13.45 STEEL BED shrinks less than /10 of 1% and won’t compress, contents jar Acraglas Non-Flammable™ Release Agent; (1) Mea- crumble or “sugar” under the most punishing magnum or semi- suring Spoon Set, (5) Re-useable Poly Mixing Dishes, (25) Mixing #081-000-021AT Application Gun, 1E26M59 �� 29.99 auto recoil. Fiberglass stockmakers use it to support the recoil lugs Sticks (5) Brown Dye Paks, (5) Black Dye and (25) Release Agent ® #081-000-029AT Mixing Tips, 5-pak, 1E7Q52 �� 9.00 of their lightweight mountain rifles; military armorers and civilian Applicators; Instructions. ACRAGLAS DYES shooters use it under the most grueling conditions without break- #081-040-016AT STEEL BED Shop Kit, 1H105N09 ��$ 121.99 Actually Dyes The Epoxy down or deterioration. For Perfect Color STEEL BED BULK QUANTITIES: We tested and abused STEEL BED every way possible and, once Traditional Brown, Jet we were convinced of its amazing superiority, test samples went #081-040-017AT 8 oz. Resin, 1E39D82 �� $ 44.95 Black, Camo Green and White ACRA-RELEASE™ to armorers, gunsmiths and competitive shooters. They tested #081-040-018AT 8 oz. Hardener, 1E51B44 �� 55.99 “Toner” dyes actually mix with STEEL BED in “real life” situations - it met and exceeded every de- Easy-To-Use, Positive Release Agent For #081-040-019AT 16 oz. STEEL BED, 8 oz. Resin and 8 any epoxy to give even, true mand made of it! No cracking, crazing or “sugaring”. Group sizes color throughout. Use straight All “Acra” Products (The One We Use!!) got smaller. All the guns tested - semi-auto, 1000 yard, bolt-action oz. Hardener only, 1H94G57 �� 99.90 #081-040-064AT 64 oz. STEEL BED, 32 oz. Resin and 32 for stock bedding or mix with White “Toner” to match wood for crack According to famed stockmaker Bill McGuire match rifles, benchrest guns and hunting rifles - performed better repair, patching, invisible bedding lines. When bedding fiberglass after bedding with STEEL BED. oz. Hardener only, 1H268Q77 �� 309.99 of Wenatchee, Wash., “I can honestly say it (ACRA- stocks that are to be painted using our Camo Paints, the Brown, Jet RELEASE) is the best and cleanest release I have Black and Camo Green colors are a perfect match, so bedding lines ever used”. Specially formulated to apply easily, yet won’t show. Brown is also the same as in ACRAGLAS and ACRAGLAS gives sure, positive release for all “Acra” products in ® GEL Kits. Use a very small amount of Jet Black to duplicate grip all types of bedding under varying conditions. (You PARRISH REMINGTON 700 caps, buttplates, etc., in casting molds. White “Toner” doesn’t cast still have to cover all surfaces with it!!) Ideal for ir- One end comes pre-contoured to match the bottom radius of the pure white; use to lighten other colors. ab regular shapes. Cuts cleanup time. Recoats missed PILLAR BEDDING Remington 600/700 series round receivers. Deeply grooved blocks SPECS: Packaged 1 fl. oz. (30 ml) dye in screw-cap plastic jar. Try-Pak areas easily. Will not affect fit/tolerances. Clear, but hold extra bedding compound for a solid bond to the stock. Instruc- contains 1 jar of each color. stays “oily” so you can both see and feel the cov- BLOCKS tion sheet explains how to determine correct block length and install #081-030-300AT ACRAGLAS Dye Try-Pak, 1H29K36 �� $ 34.95 erage. Wipes off metal and cured epoxy with 1,1,1 Improves Accuracy; Contoured To Fit the blocks for maximum accuracy gain. Easily adapted to any round- STOCK # COLOR STOCK # COLOR Trichloroethane. Works great with all our epoxies: The Round, Remington Receiver bottomed receiver, or square up and use on flat bottoms too. ab ACRAGLAS®, ACRAGLAS GEL®, STEEL BED™, ACRA- SPECS: Aluminum. 1.44" (36.5mm) long, .562" (14.3mm) diameter body, #081-030-001AT Black #081-030-003AT Brown WELD™, ACRA-QUICK™, and most others! ab Eliminate stock “crush” when tight- #081-030-002AT White #081-030-004AT Green ening guard screws by supporting the .280" (7.1mm) diameter hole, pair weighs .7 oz (19.8g). SPECS: 16 fl. oz. (473 ml) Aerosol. receiver on these solid aluminum blocks. #720-200-700AT Pillar Bedding Blocks, 2G10A53 �� $ 11.99 — Advise # — ACRAGLAS Bulk Dye, 1H9E44 �� $ 10.95 #081-028-000AT ACRA-RELEASE Aerosol, 1H25Q99 �� $ 32.99

SATISFACTION GUARANTEED

PAGE 416 SINCE 1939 Office/Tech: 641-623-5401 ACRAGLAS® PROFESSIONAL BEDDING SYSTEM ACRA-BED™ PRE-COLORED EPOXY TRIGGER GROUP SURGICAL TUBING

For Fast Bedding & BEDDING BLOCK Constant Pressure To Hold STOCK WORK Stock Repairs Where You Want It - Replaces The Trigger Assembly During How You Want It “Goof-proof” ep- Bedding Jobs oxy formula makes The stretchiest, pullingest, ® small bedding jobs Solid Delrin block takes the place of self-tightening clamp you can and stock repair easy the trigger assembly so you don’t have to fill buy…Pure Gum Surgical Latex for beginners and yours with clay, or wrap it with tape - and Tubing! Wrapped around a busy professional then clean all that up after bedding - to keep bedding compound out split gun stock, it will draw the gunsmiths alike. The convenient application gun automatically when ’glas bedding your stock. Just remove your trigger assembly, glue line so thin it looks like mixes the resin and the hardener as you apply a precise amount attach the blank and spray with release agent. Simple to install, quick part of the grain, with no “clamp marks” in the wood and no slip- of Acra- Bed exactly where you need it—no mess, no waste. Thick, and mess-free to remove. ab ping or pulling-off of the joint. For holding all irregular surfaces it ® 1 1 smooth consistency makes it stay put, and a 20-minute work time SPECS: Delrin , white. Remington 700 - Approx. 1 /2" (3.8cm) wide, 2 /4" is unsurpassed - gluing, forming, jigging, aligning - use the Pulling 29 lets you position parts and work the product into place before it (5.7cm) high, /64" (11.5mm) thick; Mauser 98 will vary. Power of surgical tubing. (It also makes excellent slingshot rubbers.) sets. Hardens to the touch in 12 hours; cures completely in three #080-000-206AT Rem. 700 Trigger Group Bedding Use no knots. Tuck over one end and wrap over it, as shown, when days. Comes in two colors: a “walnutty” medium brown that blends Block, 8K25J54 �� $ 29.99 pulling the tube around the part being held. Make the final tuck as The industry-standard stock bedding compound for more than with most wood stocks, and black to match popular black, synthetic #080-000-207AT Mauser 98 Trgr Group Bedding Block, shown. A small wedge or wood dowel simplifies making this final a generation, Acraglas is now available in a full-featured kit with stocks. Use the non-flammable release agent to prevent the epoxy 8K25A83 �� 29.99 tuck. Guaranteed to hold! everything the professional gunsmith needs for taking on almost from bonding where you don’t want it to stick. ab Choate’s Rifle Shop, Palmdale, CA., reports, “I have been using any-size bedding or repair job. Available with original-formula SPECS: Kit contains application gun, 1.6 fl. oz. (50ml) Acra-Bed cartridge, my piece of tubing for 8 years and repaired stocks split end-toend 1 Acraglas, the hard, durable, non-shrinking bedding and accurizing /4 fl. oz. (7.4ml) release agent, 2 mixing tips, and instructions. Refill Pak using ACRAGLAS®. It will stick to ACRAGLAS, but pulls right off with bedding supplies compound preferred by riflesmiths all over the world, or longer- contains 1.6 fl. oz. Acra-Bed cartridge and 2 mixing tips. no damage to the tubing. Use it for forend tips, grip caps, cracked curing Acraglas Gel, with its butter-smooth consistency that won’t #081-042-014AT Brown Acra-Bed Kit, 1H37E22 ��$ 41.95 SCORE HIGH REMINGTON 700 and split stocks …” run, drip, or leach, and a stable, molecular lattice structure that won’t #081-042-013AT Black Acra-Bed Kit, 1H37Q22 �� 41.95 Stocked in 2 weights. Type A is for light, multiple wrap jobs. Type crack, craze, or “sugar out.” These self-contained kits come with ev- STOCK BEDDING BLOCK KIT B is for long pull or where greater tension is desired. ab #081-042-011AT Brown Acra-Bed Refill Pak, 1H15B81 �� 16.99 1 1 3 erything you need to get the job done—except the rifle. Both include SPECS: Type A - /8" (3.2mm) I.D., /4" (6.3mm) O.D. Type B - /16" (4.8mm) #081-042-012AT Black Acra-Bed Refill Pak, 1H13I14 �� 14.95 5 plenty of hardener, dyes, release agent, solvent/ thinner, measuring/ Eliminates Bedding I.D., /16" (7.9mm) O.D. mixing cups, applicators, masking materials, and instructions. You #081-000-029AT Mixing Tips, 5-pak, 1E7Q52 �� 9.00 Disasters; #084-076-001AT Type A Surgical Tube 12 ft., 4H12J37 �� $ 16.99 also get fast-setting Acra-Quick™ and Acra-20™ two-part epoxies Provides A Clean, for fast repairs. Acra-Quick/Acra-20 are unmatched for strength, #084-076-002AT Type B Surgical Tubing 12 ft., hardening speed, and their ability to bond to almost any material, Professional Look 4H13D20 �� 17.99 including wood, metal, and plastics with all the famous strength and Aluminum ® holding power of Acraglas. The kit also includes the reusable, “goof DEVCON filler blocks proof” applicator gun that automatically mixes epoxy and hardener replace the in to a precise 1-to-1 ratio for proper bonding as you apply it to the EPOXY METALS Remington 700 work area. All of this comes packed in a convenient, go-anywhere REUSABLE SYRINGES Putty Or Liquid For Strong, bot¬tom metal “ammo box” carry/storage case. ab to prevent ep- ® Machinable Rifle Bedding Accurate Dispensing Of ACRAGLAS , SPECS: Both kits contain 16 oz. Acraglas solvent/thinner, 3 oz. release oxy overflow ® agent, 14 oz. Acra-Release aerosol, 50 ml Acra-20 cartridge, 50ml Acra- ACRAGLAS GEL , Two-part epoxy forms maximum- that can cause parts to be permanently bonded to the stock. CNC Quick cartridge, applicator gun, 1 oz. brown dye, 1 oz. black dye, 16 oz. Wood Glues & Greases strength rifle bedding, and helps repair machined to slightly oversize dimensions to ensure original or cus- masking clay, (100) mixing sticks, (50) 1 oz. mixing cups, (25) applicator non-critical metal parts. Fills voids, cracks tom parts fit stress-free with little to no extra cleanup. Produces a Put just the right swabs, (12) applicator brushes, (2) epoxy mixing pads, 36 yds. 2" bed- and machine marks; excellent bonding straight, flat, bedded surface that looks custom-molded for a truly amount of cutting com- ding tape, 12 ft. surgical tubing, and instructions, all packed in a tough, strength for many wood-to-metal and professional look. BDL Kits include filler blocks for both the maga- pounds or greases exactly molded-polymer carrying case with lift-out tray. Acraglas Kit includes 28 metal-to-metal applications. Machinable after 4 hours; fully cures zine well and the floorplate assembly to allow bedding the sides of where you want them. oz. Acraglas resin, 7 oz. Acraglas hardener, 8 oz. Acraglas floc, and (4) in 16 hours, or reduce cure time by applying heat per the manufac- the magazine well if desired. Filler blocks remove easily after the Great for getting into tight measuring spoons. Acraglas Gel Kit includes 8 oz. Acraglas Gel resin, 8 turer’s instructions. Highly resistant to chemicals and acids. Steel, bedding has hardened; simply tighten the extraction screws against places. Clean up easily; use oz. Acraglas Gel hardener, and (10) 8 oz. plastic mixing cups Aluminum and Titanium available as putty. Steel also available as liq- the provided bolt recess rod. Models for BDL short (SA) and long again and again. Try-Pak #080-000-633AT Prof. Acraglas Bedding System, uid for easy flow into tight areas, and making molds, fixtures and light action (LA) rifles available. ADL includes a filler block to replace the has 2 of each size. 8K188C58 ��$ 205.95 gauge forming dies. Steel Putty and Titanium Putty meet Mil-Spec triggerguard on ADL short and long actions. Extra long screw pro- SPECS: Polypropylene, 10cc - 1 11 1 #080-000-634AT Prof. Acraglas Gel Bedding System, DOD-C-24176B(SH), Steel Liquid meets Mil-Spec MMM-A-1754, vides leverage to gently lift out the block after bedding. ADL/BDL 5 /4" (13.3cm) overall, /16" (17.5mm) diameter. 30cc - 6 /4" (15.9cm) overall, 1 1 8K190H72 �� 212.99 and Aluminum Putty meets Mil-Spec DOD-C 24176B. ab Kit includes all filler blocks for bedding ADL/BDL short and long 1" (2.5cm) diameter. 50cc - 7 /2" (19cm) overall, 1 /4" (3.2cm) diameter. action rifles. ab SPECS: Steel Putty - 1 lb. (454g) resin, 3.4 oz.(96.4g) hardener. Steel Liquid #081-100-610AT 10cc Syringe, 6-pak, 1H11L20 �� $ 14.99 - 1 lb. resin, 2.6 oz. (73.7g) hardener. Aluminum Putty - 1 lb. resin, 3.3 oz. SPECS: 6061 aluminum filler blocks, bead-blasted finish; steel, blued 11 #081-100-630AT 30cc Syringe, 6-pak, 1H12I84 �� 14.99 (93.6g) hardener. Titanium Putty - 1 lb. resin, 4.6 oz. (130.4g) of hardener. hardware. BDL Kit includes floorplate block, magazine block, /16" dia. All include instructions. bolt recess rod, hardware and Allen wrench. ADL includes triggerguard #081-100-650AT 50cc Syringe, 6-pak, 1H16M56 �� 19.99 ITW PHILADELPHIA RESINS block and hardware. ADL/BDL Kit includes all blocks and hardware for #081-100-000AT Syringe Try-Pak, 1H12L85 �� 14.99 #262-100-101AT Epoxy Steel Putty, 2F36G99 ��$ 36.99 ADL and BDL short and long action. MARINE-TEX #262-100-102AT Epoxy Steel Liquid, 2F38C99 �� 38.99 #804-000-013AT BDL Bedding Block Kit, SA, #262-000-001AT Epoxy Aluminum Putty, 2F71N21 �� 76.37 4K94P99 �� $ 94.99 Handy Size, Ready To Mix & Use #262-000-002AT Epoxy Titanium Putty, 2F101B99 �� 101.99 #804-000-012AT BDL Bedding Block Kit, LA, High strength epoxy plugs holes, seals 4K94P99 �� 94.99 cracks and makes repairs in wood, alumi- #804-000-011AT ADL Bedding Block, SA/LA, num, and steel. Putty-like consistency, will 4K22I14 �� 22.99 “LITTLE BITTY” CUPS not run or drip. Impervious to solvents. Vir- #804-000-010AT ADL/BDL Bedding Block Kit, No-Mess, No-Waste, Small Quantity Mixing tually no shrinkage or expansion. ab MODELING CLAY 4K199A99 �� 199.99 SPECS: 5-to-1 mix ratio. 30-40 minute work Accurately measure and mix smaller time. Hardens in 4-5 hrs. Contains resin, cata- amounts of our fine family of Acra™ Bedding lyst, mixing cup, mixing stick, instructions. 32 Easily and Cheaply Fill Products for stock repairs or quick fixes, without waste, in these oz. size does not include cup or stick. Action Recesses Re-use strong, plastic, medicine cups. Also, perfect working containers for #904-301-002AT 2 oz White Marine-Tex, 4K12A61 �� $ 17.49 small amounts of paint, stain, stock finish, cold blue or any non-tri- Clay Filler Over & Over chlor- or non-TCE-based gunsmithing liquids. Graduations clearly #904-301-102AT 2 oz Gray Marine-Tex, 4K11M23 �� 15.99 Use this simple, inexpensive clay rial filling those voids and making action removal very difficult! ab marked in drams, ounces, cc’s, milliliters, and tablespoons for con- #904-303-014AT 14 oz White Marine-Tex, 4K32H99 �� 38.99 to prevent bedding headaches! Fill SPECS: Light tan color, non-drying, regular consistency; eight 4 oz. (113g) venience and ease of measuring. ab #904-303-114AT 14 oz Gray Marine-Tex, 4K32K99 �� 38.99 recesses or voids around the triggerguard, magazine cut, or any ma- sticks per pak. 2 lb. (.9 kg) total weight. SPECS: 1 fl. oz. (30 ml) plastic cups packaged in bags of 25 each. #904-304-001AT 32 oz Gray Marine-Tex, 4K79H29 �� 86.99 chine cuts ahead of or behind the recoil lug. Prevents bedding mate- #046-100-002AT Modeling Clay, 4A9J25 �� $ 14.99 #081-010-125AT “Little Bitty” Cups, 1H5L07 �� $ 6.99

order on the web

Orders/Tech: 800-741-0015 brownells.com PAGE 417 PASCO .010" PIPE WRAP TAPE CERTISTRIP WALNUT FINISH REPAIR KIT Exact Spacing When STOCK REPAIR PIN KIT Heavy Duty - So Tough It Even Strips All-Finish “Hot” Repair Free-Floating Barrels Remington and Browning Epoxy Sticks In Colors Use With Finishes Each layer of tape is exactly Fill voids, fix scratches, ACRAGLAS®, .010" thick and provides a nice, uni- The most potent stripper we’ve found. dents and gouges in walnut form gap to properly float barrels ACRA-QUICK™ or Fast, easy-to-use. Water cleanup. Works like stocks with these sticks plus a pallet knife and a heat source. ab 3 3 to improve accuracy by eliminating ACRA-20™ honest-to-goodness magic in removing SPECS: 6" (15.2cm) long x /8" (9.52mm) high x /4" (19mm) wide. Kit con- stock-to-barrel pressure. Can also For Stronger- those incredibly tough epoxy finishes. Mini- tains one of each shade listed below, plus two additional shades. be used when bedding lugs. Than-New Repairs mal grain raising; requires only light sanding #826-775-105AT Dk Walnut Repair Stick, 8K6M43 �� $ 6.99 SPECS: 100 feet (30.5m) long roll, 2" (5.1cm) wide, .010" (.25mm) thick. before refinishing. Wear rubber gloves. Use On Cracked/Split #826-775-119AT Walnut Repair Stick, 8K6P43 �� 6.99 #100-001-354AT .010" Pipe Wrap Tape, 1A6D21 �� $ 6.99 adequate ventilation. Apply with a natural STOCK WORK STOCK Stocks bristle brush. ab #826-775-168AT American Walnut Repair Stick, SPECS: 1 qt. (32 fl. oz./946 ml) and 1 gal. (128 fl. oz./3.8 L) containers. 6B6N99 �� 6.99 With this Kit, plus #826-775-000AT Finish Repair Kit, 6B26L78 �� 27.99 ACRAGLAS and a #173-100-032AT 1 Quart Certistrip, 5L30I12 ��$ 36.99 vari-speed drill, you can do quick, easy, sure-to-hold repair jobs on #173-100-125AT 1 Gallon Certistrip, 5L99D36 �� 122.99 cracked or broken stocks. Pins go in easily, won’t further split the stock; cannot pull or shoot out; can be cut off at any length. Made BEDDING/MASKING TAPE of “half- hard” brass alloy. 60° flat-top threads for best holding. After Extra-Heavy Duty For Abrasive Blasting broken surfaces are coated with ACRAGLAS and clamped tightly, ABRASIVE WOOLS drill pin hole with drill provided. Coat pin with ACRAGLAS also, and DURITE WATERPROOF High-density, PVC tape easily protects run it into hole with vari-speed drill at slow speed. After cured, cut When Wet Or Dry Paper Is A Bronze Wool - Can be carefully polished sides of 1911 Auto slides, pis- used for just about everything off and dress ends. ab Must - Durite Is The Answer tol frames, or shotgun and rifle receivers from 1 SPECS: 2 /2" (6.3cm) overall length with 2" (5.1cm) threaded. Kit contains: that steel wool is used for. Will abrasive grit in the blast cabinet. Withstands 1 3 1 12 each of /8" (3.2mm) and /32" (2.4mm) Stock Repair Pins, plus (1) /8" Sanding media developed es- not rust, nor is it as abrasive as high blast pressures up to 100 psi. ab 3 (3.2mm) & (1) /32" (2.4mm) jobber length drills. pecially for wet sanding of wood steel wool. It’s just about per- SPECS: Black, available in 1" (2.5cm) wide x 36 yds #080-565-000AT Stock Repair Pin Kit, 8K29M33 ��$ 35.99 finishes to get the Dull London fect for rubbing down a nicely (33m) long or 2" (5cm) wide x 36 yds long rolls. 1 look, or on steel before polishing. blued gun that has just a bit of #080-565-125AT 12, /8" Stock Repair Pins, 8K20E70 �� 27.99 rust or crud that must be removed. It will not rub through blue and #084-092-101AT 1" Bedding/Mask Tape, 4H7F22 �� $ 10.99 3 Great on 1911 frames and slides. #080-565-093AT 12, /32" Stock Repair Pins, 8K23J21 �� 29.99 - 3 or More - 1" Bed/Mask Tape, per each, 4H7F22 �� 10.99 Works great wet or dry. Silicon the long, soft strands resist break down and sharding off into work. carbide grain; strong, waterproof, Great for removing stripper-softened stock finish, or whiskering #084-092-001AT 2" Bedding/Masking Tape, during finishing. 4H13H33 �� 16.99 backing paper. ab SPECS: 9" (22.9cm) x 11" (27.9cm). SPECS: #00 (Fine) and #1 (Medium) #3 (Coarse). Packed 3 pads in bag - 3 or More - 2" Bed/Mask Tape, per each, SATELLITE CITY per grade. 4H13H33 �� 16.99 STOCK # GRIT STOCK # GRIT #439-200-101AT #00 Bronze Wool Pads, 8K9B64 �� $ 10.49

BEDDING SUPPLIES HOT STUFF INSTANT GLUE #657-250-220AT 220 #657-250-400AT 400 #439-200-201AT #1 Bronze Wool Pads, 8K9Q64 �� 10.49 #657-250-320AT 320 #657-250-600AT 600 Repairs Wooden Stocks, Fixes Gun #439-200-300AT #3 Bronze Wool Pads, 8K9F99 �� 9.99 Parts In As Little As Five Seconds — Advise # — 50 Sheets Durite, one grit, not asst., 7E68L08 ��$ 68.08 MILD STEEL STEEL WOOL - Get Quick bonding, industrial-grade, the exact abrasive action you need DOUBLE ULTRA-FINE 1200 GRIT WET OR DRY PAPER For folks Measuring Spoon Set cyanoacrylate adhesives make short - for all kinds of jobs. Highest quality wanting the “high-shine” finishes. Follow with our Five “F” Com- work of clear finish filling, fiberglass and “wool”; full range of cuts. pound for an eye-popping gleam. For Mixing Bedding Compounds & wooden stock repairs, sight mounting SPECS: 5 grades: #0000 Super Fine; SPECS: 12" (30.5cm) x 12" (30.5cm) sheets. 1200 grit. Other Stuff In The Shop and general shop work. Bonds almost #000 Extra Fine; #00 Very Fine; #0 instantly to leather, vinyl, rubber, wood, #657-251-900AT 1200 Grit Durite, 5 or more sheets, Fine; and #1 Medium. 8 pads per pack. Four stainless steel measuring laminates, plastic, fiberglass and Kevlar. each, 7E2Q75 �� $ 2.75 spoons with high-polish, anti-stick #439-300-400AT #0000 Steel Wool, 8K5C67 ��$ 6.99 Most repairs require only a drop. Origi- #439-300-300AT #000 Steel Wool, 8K5B67 �� 6.99 finish have a gazillion uses around nal Formula - Ultra thin; wicks into the 1 1 the shop. Sizes: /4 teaspoon (1 mL), /2 smallest crack and bonds in only five #439-300-200AT #00 Steel Wool, 8K5L67 �� 6.99 teaspoon (2 mL), 1 teaspoon (5 mL), seconds. Use to make invisible repairs STOCK IRON #439-300-100AT #0 Steel Wool, 8K5J67 �� 6.99 and 1 tablespoon (15 mL). on wooden stocks, and fill chips in clear #439-300-101AT #1 Steel Wool, 8K5P67 �� 6.99 #081-000-044AT Measuring Spoon Set, 8F2H51 ��$ 3.99 finishes. Super “T” - Thick consistency Just The Right Size & Shape to fill gaps and voids on rough surfaces. 10 to 25 second working For Raising Stock Dents time. ab SPECS: 1 oz. (28 g) or 2 oz. (28 g) wt. Applicator tip bottles. Hold this teflon-coated, professional qual- #862-000-001AT 1 oz. Hot Stuff, 2F5D26 �� $ 5.99 ity, stock iron close to a dampened stock to quickly create the steam needed when raising DICO ABRASIVE WOOL #862-100-002AT 2 oz. Hot Stuff, 2F8Q86 �� 10.99 dents. Compact, angled head and long, plastic Long-Lasting, Rust-Free OLD FASHIONED WHITING #862-000-004AT 1 oz. Super “T”, 2F5I79 �� 6.99 handle give precise control. Variable heat control gives just the right Alternative To Steel Wool

STOCK FINISHING SUPPLIES STOCK #862-101-002AT 2 oz. Super “T”, 2F8K64 �� 10.99 temperature. Heavy-duty for continuous use. Quickly Draws Excess Oil Out 5 3 SPECS: 115v. 165 watts. 1 /8" (3.2cm) x 4 /4" (12cm) head. Of Gun Stocks #862-110-000AT Instruction Book, 2F00DDS �� .00 Synthetic, non-metallic al- #875-100-002AT Stock Iron, 5G26K98 �� $ 33.99 ternative to steel wool is long Simple “paint-it-on, brush-it-off” NCF QUICK AEROSOL ACCELERATORS - Forces Hot Stuff and lasting and won’t rust or shed process literally draws soaked-in grease Super T to cure instantly for a super-tough bond. Stays active for fibers. Use on wood, plastic, or and oils out of any oil-finished or oil- up to three minutes. Low-evaporation, long shelf-life formula. ab metal to produce a desired fin- soaked gun stock. Especially useful on #862-000-007AT 6 oz. Quick Accel., 2F10C77 ��$ 16.99 ish, or to clean away rust, car- military stocks. Same method as de- EPOXY MIXING PADS bon, dirt, or crud deposits. Lasts longer than steel wool—when the fibers get clogged with debris, just scribed in the traditional gunsmithing SUPER SOLVENT - ALWAYS have on hand, just in case you glue Always Have A Clean books and just as effective now as then. your fingers together. Dissolves fully cured Hot Stuff glues. ab wash the pad with cold water, air dry, and it’s ready to reuse on other Mixing Surface Just make a thin paste of Whiting and #862-105-002AT Super Solvent, 2F7E35 ��$ 9.99 projects. Safe for use with cleaning and stripping solvents. Coarse methanol or TCE, acetone, or toluene Slick, plasticized paper is for fast rust removal and smoothing rough wood; Medium is for and paint it onto the stock, then brush REPLACEMENT TIPS - Hot Tips replace clogged bottle tips; extra glued on two edges so it paint surface preparation, pre-soldering and pre-brazing cleaning; if off after it dries and darkens with oil. friction snap caps included. Pro-Tips - Very fine tip applicators for won’t curl up. Use the top Fine is for metal and wood surface finishing. ab Warming gently speeds process. Repeat if needed. ab jobs that require only a tiny amount of adhesive applied to a spe- one, tear it off, toss it, and SPECS: Synthetic abrasive material. SPECS: 1 lb. (454 g) or 3 lbs. (1.4 kg) net weight. cific area. Friction fits over the top of the standard tip. ab there’s a fresh one waiting. ab #032-000-011AT Abrasive Wool, Coarse, 2C3E09 ��$ 3.49 #083-032-100AT 1 lb. Whiting, 5L7B19 �� $ 8.99 #862-106-000AT Hot Tips, box of 2, 2F2G35 �� $ 4.99 SPECS: 4" (10.2cm) x 4". 100 sheets per pad. Sold per 3 pads. #032-000-010AT Abrasive Wool, Medium, 2C3K09 �� 3.49 #083-032-300AT 3 lb. Whiting, 5L11I22 �� 14.45 #862-107-000AT Pro-Tips, box of 12, 2F1B93 �� 4.99 #081-031-003AT Epoxy Mixing Pads, 1H8B41 �� $ 10.99 #032-000-009AT Abrasive Wool, Fine, 2C3N09 �� 3.49

SATISFACTION GUARANTEED

PAGE 418 SINCE 1939 Office/Tech: 641-623-5401 SANDING DISCS STOCK FINISHING ACCESSORIES SHEET FELT PADS PILKINGTON Fast Off/On Disc & Grit Change For Polishing Pads, Vise CLASSIC SPIRIT STAINS ANTIQUE WOOD STAINS - Transparent dyes that en- Resinal Metalite Pressure-Sensitive Jaws; Three Densities Original Factory Colors For Classic Results

hance woods’ natural grain without obscuring or dull- STOCK WORK Discs lay flat for longer life. Resists disc ing. Deep penetrating. Won’t raise grain. ab Great for rubbing, polish- Use the same rich, clear-colored stains as Master clogging. For coarse-to-fine metal fin- SPECS: 4 fl. oz. (118 ml) net contents in metal can. ishing and all wood finishing. Sold in ing, and hand buffing on wood Gun Builder Phil Pilkington does to match the look 3-Paks. ab #519-200-104AT Antique Walnut Stain, 9A13J99 ��$ 13.99 or metal. Soft for tight curves; and luster of classic guns. Special solvent minimizes #519-200-204AT Antique Maple Stain, 9A14G99 �� 14.99 Medium for rounded and grain raising, lets these stains mix with most stock STOCK # DISCS PRICE gradual curves; Hard for flat finishes for big time-savings, better final job. ab STOCK & CHECKER OIL - Waterproof, low sheen, surfaces. ab SPECS: 2 fl. oz. (59 ml) glass bottles. Stain in three colors: 6" (15.2cm) 1 London-type oil finish is ultra thin to soak in deep and SPECS: 2" (5.1cm) x 4" (10.2cm) x /4" (6.3mm). Wool felt. Pre-'64 - Reddish brown like older U.S. guns. English #925-060-220AT 220 5B5G99 $ 5.99 seal the open poors of the wood. Use as a stock finish #839-295-301AT 3 Soft Felt Pads, 9C7B85 �� $ 7.85 Red - More red like English/ European guns. Gold & Brown - Same look 8" (20.3cm) or to seal freshly cut checkering. Will not plug up the #839-295-302AT 3 Medium Felt Pads, 9C8H99 �� 8.99 as old acid stain, works wonders on curly maple, good on walnut ,too. Thinner - Used to thin the stains. #591-080-060AT 60 1E10L45 $ 10.99 diamonds or become yellowish in time. Contains no #839-295-303AT 3 Hard Felt Pads, 9C7Q99 �� 7.99 silicas or pigment fillers. ab #591-080-080AT 80 1E7Q54 $ 7.54 #839-295-000AT Asst. Felt Pads, 1 pad ea. of above #703-300-904AT Stain Thinner, 3K22E25 �� $ 22.25 1E7P74 SPECS: 2 fl. oz. (59 ml) net contents jar. #591-080-120AT 120 $ 7.99 densities, 9C7G99 �� 7.99 STOCK # COLOR STOCK # COLOR 1E6H93 #241-820-002AT Dem-Bart Oil, 1D6N19 �� $ 7.99 #591-080-220AT 220 $ 6.93 #703-300-204AT Pre-'64 #703-300-104AT Gold & Brown #591-080-320AT 320 1E7K99 $ 7.99 BROWNELLS STOCK RUBBING KIT - All #703-300-304AT English Red 10" (25.4cm) the right materials so you can produce in- — Advise # — Classic Spirit Stain, 3K23B00 �� $ 23.00 #591-100-060AT 60 1E14I56 $ 14.99 comparable, hand-rubbed stock finishes BIRCHWOOD CASEY #591-100-080AT 80 1E14K99 $ 14.99 that have been a part of fine custom gun #591-120-036AT 36 1E24I25 $ 24.25 making for generations. Plus, works to re- TRU-OIL STOCK FINISH store dull, worn finishes. ab #591-120-060AT 60 1E19D67 $ 19.67 For A Deep, Rich Hand-Rubbed Finish SPECS: Kit contains 1 pt. (16 fl. oz./473 ml) lin- #591-120-120AT 120 1E18C68 $ 19.99 seed oil, 8 oz. (227 g) rottenstone, (3) 4" (10.cm) Without The Hassle ART’S GUN STOCK FILLER 1 #591-120-220AT 220 1E14F99 $ 14.99 x 2" (5cm) x /4" (6.35mm) medium felt pads and Easy to use, quick-drying finish brings out The Original Formula, Fills & Stains, Protects #591-120-320AT 320 1E17D80 $ 17.80 instructions. the warm, natural beauty and feel of your wood #083-038-000AT Stock Rubbing Kit, 3H24K90 �� $ 29.99 stock. Tru-Oil is a purified, triple-processed A combination of the finest oils, ultra-fine stock blend of natural oils that penetrates into the filler and the traditional Herter’s stains bring out the ROTTENSTONE - Genuine, triple fine, Rotten- grain to seal out moisture and make the surface warmth and hidden beauty of any gunstock. Quickly fills the pores and seals the wood with natural oils R. GALE LOCK CO. stone powder. The same that’s been used by of the wood even harder and tougher. Dries professional stock finishers for generations. Mix clear, with no grain clouding or yellowing, and it’s so fast drying - and preservatives. French Red - a rich walnut color GUN STAIN with linseed oil; becomes a fast, but fine-cutting 30 to 90 minutes per coat for an average of 3 coats - that a stock with just a hint of red; closely matches pre-’64 Win- abrasive that’s easily worked over the finish with a can be filled and finished in one day! chesters and older Brownings. Walnut - a vivid, rich brown en- Penetrates Without Raising The Grain felt pad. Use on fully dried finishes only. ab Mars repair in minutes with pad dampened in Tru-Oil and rubbed hances real walnut and darkens lighter hardwoods. Clear - no stains SPECS: 3F grade. Plastic jar. 8 oz. (227 g) and 1 lb. (454 g). over spot. Achieve either High or Low luster finishes easily. Just included, intended to enrichen and enhance the grain on birdseye Traditional, spirit-based stains for less maple, myrtle, or other fancy-grained, light-colored woods. ab #083-039-008AT 8 oz. Rottenstone, 5L10L74 ��$ 13.99 knock off unwanted gloss with fine steel wool or abrasive paper, sanding and faster recoats. Beautiful, vibrant or Stock Polishing Compound. An exceptional hand rubbed finish! SPECS: Oil base filler and stain. 16 fl. oz. (473 ml), 8 oz.fl. (237 ml). #083-039-016AT 1 lb. Rottenstone, 5L15J15 �� 19.99 colors compliment the finest hardwoods. ab Use multiple coats for a high-gloss finish or for a satin finish cut #464-101-000AT French Red Filler, 16 oz, 4F29E45 �� $ 29.45 SPECS: 4 fl. oz. (118 ml) resealable bottle. Dark Wal- back with Birchwood Casey Stock Sheen and Conditioner. Perfect #464-101-008AT French Red Filler, 8 oz., 4F16G99 �� 16.99 nut - very dark, great on birch and maple stocks. PUMICE - Genuine 3F pumice powder produces for refinishing stocks for an unfinished stock first use Birchwood #464-101-108AT Walnut Filler, 8 oz., 4F16H99 �� 16.99 Early American - a medium dark walnut with red a soft satin finish. Use to rub out a stock before Casey Clear Sealer & Filler. Dries clear, won’t blush or yellow. ab stock finishing supplies highlights. 1776 Antique - red/yellow highlights. finishing with rottenstone. Mix with linseed oil SPECS: 3 fl. oz. (89 ml)) or 8 fl. oz. (237 ml) can. Dries in 90 to 120 minutes, #464-101-808AT Clear Filler, 8 oz., 4F16I99 �� 16.99 Gives curly maple an antique look. Good for pre- to make a mild, fine abrasive. Use on fully dried cures in 48 hours. '64 Winchester. 1787 Golden- gold/yellow-brown finishes only. ab FRENCH RED STAIN - French Red stain gives a rich, walnut color #167-009-220AT 3 oz. Tru-Oil, 1K5J87 �� $ 6.99 highlights. Enhances walnut and curly maple. 1864 English - with soft SPECS: 3F grade. Plastic jar. 8 oz. (226 g) or 1 lb. (.45 kg). with just a hint of red. Closely matches pre-’64 Winchesters and brown/yellow tones, lighter than Golden. 1884 Black - dark chocolate #083-057-008AT 8 oz. Pumice, 5L8K94 �� $ 11.99 - 3 or More - 3 oz. Tru-Oil, per each, 1K4E75 �� 6.80 older Brownings. Stain only, no fillers or sealers. SPECS: Oil based stain. 8 oz. fl. (237ml) brown with yellow highlights. Has less black than Dark Walnut. #083-057-016AT 1 lb. Pumice, 5L12N75 �� 16.99 #167-009-800AT 8 oz. Tru-Oil, 1K9F71 �� 11.99 #346-069-004AT Dark Walnut, 6D18P92 ��$ 19.99 - 3 or More - 8 oz. Tru-Oil, per each, 1K6N99 �� 11.79 #464-000-003AT French Red Stain, only, 4F15P99 �� $ 15.99 #346-165-004AT Early American Walnut, 6D18L92 �� 19.99 #346-177-604AT 1776 Antique Walnut, 6D18J92 �� 19.99 TRUOIL STOCK FINISH KIT - Economical kit with everything for deluxe finish. ab #346-178-700AT 1787 Golden Walnut, 6D18Q92 �� 19.99 1 SPECS: Kit contains: 3 oz. TruOil, 2 /2 oz. Stock #346-186-400AT 1864 English Walnut, 6D18J92 �� 19.99 1 Sheen & Conditioner, 2 /2 oz. Walnut Stain, fine #346-188-400AT 1884 Black Walnut, 6D18A92 �� 19.99 PETER VANDERHAVE and coarse sandpaper. 00 steel wool, Burlap cloth. ACRA-COAT™ WOOD MILITARY STOCK STAIN #167-121-000AT TruOil Stock Finish Kit, 1K13J39 ��$ 13.99 Tough Epoxy Gives Added Stock Protection Mix & Match Military Stock Colors OIL STOCK FINISHES Gives wood and plastic stocks a durable, Use alone or mix for an exact color match to re- weatherproof finish. Not a one-shot wonder fin- store U.S. military stocks. Alcohol-based; penetrates PURE TUNG OIL - 100% pure, natural tung oil without BLUE WONDER ish, but one you apply in multiple, thin coats until additives or driers, for beautiful, hand-rubbed, in-the- and dries quickly. Formula VII - deep brown with you reach the desired luster. Resists all but the wood finishes. strong purple tones. Formula XII - medium brown. WOOD SHINE most aggressive bore solvents. Normal cure time, SPECS: 16 fl. oz. (473mL) or 32 fl. oz. (946mL). Formula XIII - light brown with red tone. Formula one week, shortened by warming stock to 90° XIX - deep brown. Formula XX - gives birch, maple, and soft woods, #586-501-016AT Pint Tung Oil, 6H18L17 �� $ 24.99 Restores & Beautifies Wood Surfaces F. Replacement Nozzle - The easy solution for a uniform, dark, walnut color; enhances natural walnut, too. Kit con- clogged nozzles. Clean Out Nozzle - Use only to #586-501-032AT Quart Tung Oil, 6H30J60 �� 42.99 tains one, 2 oz. bottle of each formula except Formula XX. ab Simple wipe on/wipe off formula penetrates clear a plugged pickup tube. ab SPECS: Individual Bottles - 4 fl. oz. (120 ml) plastic bottle. Kit - Includes (1) 2 deep into wood to restore the original luster of BOILED LINSEED OIL - Clear, linseed oil, double boiled SPECS: Aerosol. 12 oz. (340 g). Clear Matte or Gloss fl. oz. (59 ml) bottle of each formula except Formula XX. Includes instructions. your valuable wood stocks, handgun grips, gun finish. Nozzles are correct size for Acra-Coat - Wood, and double filtered to remove any impurities. Contains #500-104-001AT Formula VII, 4 oz. Bottle, 5Z21L29 ��$ 24.57 cases, or presentation cases. Blended formula driers for 4-6 hr. curing. ab sold in Paks of 12. Clean Out Nozzle not intended #500-104-002AT Formula XII, 4 oz. Bottle, 5Z21M29 �� 24.57 with natural oils covers minor scratches, returns for spraying. SPECS: 1 pint (473mL) or 1 quart (946mL). moisture to dried out wood and protects against #500-104-003AT Formula XIII, 4 oz. Bottle, 5Z21H43 �� 24.72 #083-070-112AT Matte Acra-Coat Wood, 3H9J63 �� $ 11.99 #083-040-016AT Pint Linseed Oil, damage from UV light. Doesn’t leave behind a slip- 5L19D20 �� $ 24.99 #500-104-004AT Formula XIX, 4 oz. Bottle, 5Z21J29 �� 24.57 pery residue. ab #083-070-012AT Gloss Acra-Coat Wood, 3H10E12 �� 13.99 #083-040-032AT Quart Linseed Oil, #500-104-005AT Formula XX, 4 oz. Bottle, 5Z19H24 �� 24.80 SPECS: 4 fl. oz. (118 ml) squeeze bottle. #084-179-002AT Replacement Nozzle B, 1F2N12 �� 2.59 5L24Q84 �� 31.99 #500-104-000AT Military Stain Kit, 5Z35I68 �� 38.99 #100-005-002AT Wood Shine, 6C5H20 �� $ 5.99 #084-179-004AT Clean Out Nozzle, 1F2L75 �� 3.29

order on the web

Orders/Tech: 800-741-0015 brownells.com PAGE 419 CHEM-PAK PRO-CUSTOM OIL CHEM-PAK AEROSOL VELVIT OIL TAPASTRING GUNSTOCK FINISH Gun Sav’R CUSTOM OIL Stains & Protects Wood With One Coat GUITAR POLISH RED & BLUE Easy-to-apply wood finish seals, fills, Tung Oil & Urethane Dries Quickly To A GUNSTOCK FINISH stains, and protects wood in just one coat. Optical Grade Polishes Durable, Hard Coating Remove Scratches & Enhance Fast-Drying, Easy-To-Use, Run-Proof Aerosol Gives an attractive, lustrous appearance The Luster Of Fine Wood Penetrates wood to seal out moisture and and dries completely in 24 hours. Resists quickly fill the grain. Produces a hard, tough fin- Our Tech Department gave this aerosol finish five abrasion and harsh chemicals. #200 Natu- Finishes ish that dries tack-free in as little as 2-3 hours; stars. A super-tough, professional-looking stock fin- ral for lighter color and #420 Deep Walnut Our Gun Techs discovered dries to full cure in 48 hours. Tung oil-modified ish applied in only hours without runs or sags. Fills as for darker color. Includes instructions for these amazing wood polishes urethanes resist scuffing, marring and will not it coats so you won’t spend extra time cutting-back best results. ab during a visit to the renowned chip, crack or peel. Dries to a soft gloss; can be or sanding in. Dries to the touch in only 45 minutes #100-014-933AT Velvit Oil #200 Natural, half-pint, and can be recoated in as little as six hours. Gives gunsmithing school in Trinidad STOCK WORK STOCK polished to a high gloss or cut to a satin finish. ab 9A12D21 �� $ 12.99 Colorado, and have been using SPECS: 9 fl. oz. (267 ml). an attractive satin finish. Specially formulated, oil- #100-014-931AT Velvit Oil #200 Natural, pint, modified urethanes resist scuffs and scratches but 9A15F92 �� 16.99 them ever since! Formulated by one of the instructors for use on #209-642-009AT Pro-Custom Oil Gunstock Finish, provide the look and feel of traditional, hand-rubbed oil finishes, high-quality guitars, they’ve become the polish of choice for count- 9K12F51 ��$ 14.99 without all the hard work. Will not cloud or discolor with age. Avail- #100-014-934AT Velvit Oil #420 Deep Walnut, half- less factory and custom gunstocks for equally superior results. The able in an airbrushable Liquid or handy Aerosol that dries uniformly pint, 9A15H77 �� 16.99 secret of these formulas is in the superior grade of polishing media without the aggravating splotches so common in many aerosol #100-014-932AT Velvit Oil #420 Deep Walnut, pint, selected for the mix – the same used to polish the windows on LAUREL MOUNTAIN PERMALYN STOCK “furniture” finishes. ab 9A15B92 �� 16.99 U.S. spacecraft. The 3 micron Red formula is ideal for polishing out #209-101-014AT Aerosol Satin Custom Finish, 14 oz. scratches and imperfections on old or newly refinished gunstocks FINISH & SEALER (397g), 9K13D92 ��$ 16.49 and should be used with light pressure to prevent over-polishing of delicate surface finishes. Blue formula uses ultra-fine, 1 micron #209-000-002AT Satin Liquid Finish, 8 oz., 9K11B09 �� 12.99 Tough, Waterproof; Favorite Of Pros “ORIGINAL” STOCK polishing media to refine the luster after use of Polish Red or to blend imperfections in extremely delicate finishes. Biodegradable Developed by Rick Schrieber, used and rec- RUBBING COMPOUND and environmentally friendly with no smeary waxes, silicones, or ommended by John Bivins and Joe Balickie in damaging chemicals. ab their stockmaking video (also Rifle #87 and May Produce Deluxe Finishes On Wood 3 3 ® SPECS: 2 oz. (.059 l) jar. Includes (1) one 2 /4" (6.9cm) long x 1 /4" (4.5cm) ’84 Muzzle Blasts). Made with oil-modified poly- LIN-SPEED GUNSTOCK OIL 1 Strongly recommended for new finishes to wide x /2" (1.3cm) thick felt polishing pad and instructions. urethanes that give the superior water resistance The Famous, Real, Kettle-Boiled Linseed Oil rub and blend all those high “shine” and “dull” of the plastics without the brittleness, temperature #100-003-107AT 3 Micron Red Polish, 4B10M32 �� $ 12.97 flat spots into one superb master-quality finish. sensitivity and later touch-up problems. Produce #100-003-108AT 1 Micron Blue Polish, 4B10N32 �� 12.97 Pure linseed oil, specially refined to dry Great for rejuvenating an old gunstock which high-quality, “in-the-wood” or “built-up” finishes to delight even in just 2 to 3 hours to a tough, hard, easy-to- has a good, original finish underneath the grime the pickiest pro. Both contain the same basic resins and polymers. touch-up finish. So simple to use, you can and light scratches. The results of either project The Sealer penetrates deeper into the wood, while the Finish does a even leave sanding dust to help fill pores. Apply can only be described as dramatic! Apply with Sheet Felt Pads. ab better job of filling pores in open-grained woods. ab RENAISSANCE WAX & CLEANER stain (if desired) and follow with finger-dunks SPECS: 4 fl. oz. (118 ml) or pint (16 fl. oz./473 ml) net contents. SPECS: 4 fl. oz. (118 ml) or 1 qt. (32 fl. oz./946 ml) cans. of Lin-Speed. Smooth out with the heel of your Outstanding Quality, Used On Priceless Heirlooms #519-300-004AT 4 oz. Stock Finish, 9A12C73 ��$ 12.99 #083-021-004AT 4 oz. Rubbing Compound, 5L9I88 �� $ 12.99 hand and set aside to dry. First coat will “freeze” In Museums Worldwide #519-301-004AT 4 oz. Stock Sealer, 9A10M81 �� 11.99 sanding whiskers for easy removal, ending #083-021-016AT Pt. Rubbing Compound, 5L33L32 �� 42.99 #519-300-032AT 1 Qt. Stock Finish, 9A34J99 �� 34.99 time consuming steaming and de-whiskering. Stop working so hard MICRO-CRYSTALLINE WAX, CLEANER, POLISH - Imparts a at your stock finishing! Sand it well, then APPLY Lin-Speed and LET #519-301-032AT 1 Qt. Stock Sealer, 9A28P38 �� 28.99 beautiful, glowing luster and moisture resis- DRY! Available in 2 oz. jar, halfpint can, or in finishing kits. Starter tance to wood, leather, marble, ivory, natural Kit includes 2 oz. Lin-Speed, 3 pads of #000 steel wool, pair of stone and metal; resists fingerprints, dust and food service gloves and instructions. Pro Finishing Kit includes 2 oz. wear. Helps prevent oxidation, removes oil and PILKINGTON Lin-Speed, nine 3" x 4" Mico Mesh abrasive sheets from 1500 grit to TRIPLE “F”™ COMPOUND grime; leaves the treated surface with a trans- 12,000 grit, cushioned sanding block, sandpaper sheets in 180, 220 “Ultra-Fine” Stock Rubbing Compound lucent, warm glow. Restores cloudy stock CLASSIC GUNSTOCK FINISH and 320 grit, two #000 steel wool pads, pair of food service gloves finishes. Acid-free, dries clear, won’t discolor and 28-page booklet by the original developers of Lin-Speed. ab Almost twice as fine as our “Original” Clear Or Colored For “In-The-Wood” or yellow. SPECS: 2 fl. oz. (59 ml) net contents jar. 8 fl. oz. (237ml) per can. Stock Rubbing Compound…so it removes SPECS: Paste wax, white color. 2.3 oz. (57 g). Or “Built-Up” Finishes #543-100-002AT 2 oz. Lin-Speed, 3D8M29 �� $ 9.99 very little material. Greatly enhances the #053-050-200AT Renaissance Wax, 9K22F50 �� $ 24.99 Use Red-Brown Classic to match all those pre- #543-000-003AT 8 oz. Lin-Speed, 3D17D49 �� 19.99 look and feel of any stock finish by evening out and brightening the existing finish. On PRE-LIM SURFACE CLEANER - Restores metal '64 guns that actually had the stain in the finish. Gold #543-000-001AT Lin-Speed Starter Kit, 3D12N09 �� 13.99 & Brown warms walnut, gives light woods a rich col- a glossy finish, gives a bright, jewel-like lus- surfaces without scratching. Paste mix of Neu- #543-000-002AT Lin-Speed Pro Finishing Kit, 3D38D89 �� 42.99 ter. For a satin finish, cut back Tru-Oil® or burg silica chalks, petroleum distillates, and or. Tint Clear with Spirit Stains for any look wanted, ® faster finishing. Fills pores easily, dries hard. Works Lin-Speed with 600 grit paper, apply a small amount with a soft water burnishes away stubborn powder burns as an oil finish or build up like varnish. Each bottle cloth and rub until it achieves the look you want, then buff off with and brass deposits from revolver frames and includes a 3,000 word, step-by-step instruction booklet. ab a clean, soft cloth. Gives a magnificent depth and glow. Can also use bolt faces. Lifts away surface rust safely and SPECS: 2 fl. oz. (59 ml) net contents. to remove fine scratches on stocks or furniture. ab effectively from blued and stainless surfaces, SPECS: 2 fl. oz. (59 ml) or 10 fl. oz. (296 ml) net contents. returning the factory shine, and leaving them #703-350-602AT Gold & Brown Classic Finish, 3K24B25 �� $ 24.25 #083-028-302AT 2 oz. Triple “F”, 5L4K85 �� $ 5.99 silky-smooth. ab #703-350-502AT Red-Brown Classic Finish, 3K24C25 �� 24.25 FIVE “F”™ COMPOUND #083-028-310AT 10 oz. Triple “F”, 5L9J08 �� 10.99 SPECS: Paste cleaner, tan color. 7 fl. oz. (200 ml).

STOCK FINISHING SUPPLIES STOCK #703-350-402AT Clear Classic Finish, 3K23F50 �� 23.50 Even Finer Than Ultra-Fine #053-000-001AT Pre-Lim Surface Cleaner, 9K25F95 �� $ 25.95 We really didn’t believe it when cus- PILKINGTON LINSEED STOCK tomer Don Newman said he’d found a “T” SHIRT SQUARES rubbing compound that would bring a R. GALE LOCK CO. Soft, Absorbent, Classy Rag, Eliminates RUBBING OIL Triple “F”™ finish up to a “real” shine. We tried it; he’s right and here it is. If you’re Robbing The Underwear Drawer CARNAUBA GUN WAX Add That Linseed “Glow” going for that “Shinier than a brass bed in Now, when you need the perfect, 100% cotton wiping or clean- Enhances The Natural Beauty Of Wood a sportin’ house” look, Five “F” will do it. Gives any wood stock a soft, glowing luster. Great ing rag you won’t have to reach for your favorite old “T” shirt. These We knocked a brand new Remington finish back a bit, brought it up Protects and beautifies with natural car- after-season wipe down to maintain a healthy finish. high-quality, cleaning and wiping squares are knitted, not woven, to just below original with Triple “F” and then got out the Five “F”. nauba, and nothing that can dull or cloud Red-Brown and Gold & Brown are especially good from 5.3 oz., heavyweight cotton material that will not ravel, lint or The resulting gloss and depth are unbelievable! Can be used to give gun finishes. Soft Paste rubs on easily, buff on checkering, won’t plug the diamonds. Apply with string apart, even after repeated washings. Convenient 12" x 12" size luster to satin finishes, too. To get “Hi-Shine”, start with “Original” and with soft cloth. Liquid covers hard-to-get-to areas. ab rottenstone to enhance the oil’s polishing action. ab is just right for polishing, cleaning, staining and finishing applica- work up thru Five “F”. Great for scratch removal on fine surfaces like SPECS: Paste - 2 oz. (57 g) wt. in resealable tin. Liquid - 2 fl. oz. (59 ml) SPECS: 2 fl. oz. (59 ml) net contents. tions, plus shop cleanup and dusting. Highly absorbent right from plexiglas or plastic lenses. ab the package, not treated with silicone or fillers; becomes even softer wt. in plastic bottle. #703-355-602AT Gold/Brown Linseed Oil, 3K25A99 �� $ 25.99 SPECS: 2 fl. oz. (59 ml) or 10 fl. oz. (296 ml) net contents. and more absorbent, wash after wash. ab #346-036-002AT Paste Gun Wax, 6D18Q92 ��$ 19.99 #703-355-502AT Red-Brown Linseed Oil, 3K25N75 �� 25.75 #083-028-502AT 2 oz. Five “F”, 5L9E54 ��$ 10.99 SPECS: 100% cotton, 12" (30cm) x 12", Pack of 3 dozen. #346-037-002AT Liquid Gun Wax, 6D18D92 �� 19.99 #703-355-402AT Clear Classic Linseed Oil, 3K23K00 �� 23.00 #083-028-510AT 10 oz. Five “F”, 5L23J36 �� 29.99 #856-112-036AT “T” Shirt Squares, 6E20E52 �� $ 23.99 Cannot ship outside Continental U.S. Shipped UPS or FedEx Ground only within U.S.

SATISFACTION GUARANTEED

PAGE 420 SINCE 1939 Office/Tech: 641-623-5401