Florida Local Users’ Group

2017 Fall Training Forum November 1st – November 3rd, 2017 Tampa, FL

2017 Fall Training Forum Sessions Include: FDOT Roadway Modeling Civil 3D Bentley OpenRoads Autodesk AVAIL Bentley OpenBridge MicroStation CONNECT Bentley AECOSim Building Designer LumenRT/Context Capture Drone Technology Civil Animation Construction LiDAR FDOT Survey Drainage/ SubSurface Utility Autodesk Formit

2017 FLUG Fall Training Forum November 1st - 3rd, 2017 Tampa, Florida Daily Overview 10:30 – 11:45 Wednesday General Registration! (Technology Hub)

12:00 – 5:00 Wednesday General Sessions and Hands-On Workshops!

7:00 – 8:00 Thursday Registration and Breakfast! (Technology Hub) 8:00 – 8:15 Thursday Welcome with Opening Remarks! (Grand Ballroom) 8:15 –9:15 Keynote: "Drone Technology" Thursday (Grand Ballroom) by: Kurt Rasmussen, Bentley and Altavian

9:45 – 5:15 Thursday General Sessions and Hands-On Workshops!

6:00 – 8:00 Thursday Evening Social - Technology Hub - Refreshments Served- Presented by FLUG and Our Partners (Technology Hub) 7:00 – 8:15 Friday Registration and Breakfast! (Technology Hub) 7:30 – 7:45 Friday General Annoucements! (Grand Ballroom)

8:30 – 3:45 Friday General Sessions and Hands-On Workshops! General Registration Information: > Name Badges are required for entrance into all Sessions, Workshops, Evening Social & Meals. Guest Name Badges may be purchased at the FLUG Registration Table. > Workshop Sign-In is required by all Attendees upon entering each workshop! Attendees must Sign-In during each session or workshop applicable to receive credit! Workshop Free Audit Seats will be available on a 1st Come 1st Serve basis. ✰ > Professional Development Hours (PDH Credits) offer (1) Credit per (1) Hour of class. Attendees must Sign-In during each session/workshop to receive credit! Pickup Professional Credit Certificates at the FLUG Registration Table. > FLUG Raffle Tickets are sold at the FLUG Registration Table. **All FLUG Participants are eligible to participate.** > Door Prizes!!! Visit the Support Partners and drop off one card at each Booth! ** FDOT employees NOT eligible to participate.** > FLUG Registration & Workshop fees collected cover all costs of Sessions, Workshops, Meals, FLUG Give-a-ways & Evening Social during the FLUG Training Forum. All FLUG Attendess present are eligible to participate. Please refer to FLUG Disclaimers. 2017 FLUG Fall Training Forum November 1st - 3rd, 2017 Tampa, Florida ✰

Wednesday 1-Nov-17 General Session and Hands-On Workshops

General Session General Session General Session General Session General Session General Session Workshop Workshop Workshop Workshop Revit/AVAIL/FormIt MicroStation V8i FDOT Civil 3D FDOTSS4 Bentley Bridge OpenRoads FDOT MicroStation CONNECT TopoDOT Civil 3D Brandon 1 (35) Brandon 2 (60) Brandon 3 (35) Brandon 4 (60) Brandon 5 (35) Brandon 6 (60) Cypress (56) Equestrian (20) Park (20) Sabal (20) ✰ ✰ ✰ W-1E W-1P W-1S Drawing Production RRR Design & Modeling An Introduction to W-1C Bring your 3D Revit model to RRR Design & Modeling OpenBridge Modeler: QuickStart for MicroStation TopoDOT: Latest tools and AutoCAD/Civil 3D for Innovations in with FDOT Civil 3D State OpenRoads CONNECT CADD-GIS Interoperability for 12:00 - life with Revit Live with OpenRoads What is New! CONNECT Edition for Existing techniques for PointCloud Data MicroStation, GeoPAK and MicroStation V8i Kit - Part 1 of 2 Edition Right of Way Mapping 1:00 Advanced Solutions KCG Corp. Bentley Users Processing OpenRoads Designers Bentley FDOT Bentley FDOT Jamie Owens Richard Perez Alex Mabrich Bentley Certainlty 3D CADDesk Consulting Steve Rick Mike Racca Jimmie Prow John Hazlip/Rebecca Barber Dave Mayer Mike Cook Brian Morse

15 Min BREAK ✰ ✰ OpenBridge Modeler: ✰ Leveraging DWG and RRR Design & Modeling If you can Sketch it up, you How to Model Precast, OpenRoads Best Practice - Other Formats in with FDOT Civil 3D State 1:15 - can FormIt up Steel and Segmental Corridor Modeling MicroStation Kit - Part 2 of 2 2:15 Advanced Solutions Bridges Bentley Bentley FDOT Jamie Owens Bentley Kevin Jackson Steve Rick Mike Racca Alex Mabrich

30 Min "Snack with the Support Partners!" ✰ Stop, Collaborate & Design ✰ Signalization Design using Existing Features Model Using Autodesk’s Creating Traffic BrIM Analytics Product OpenRoads Best Practice - the FDOT Civil 3D State file (SURVRD) in FDOTSS4 2:45 - Collaboration For Revit and Animations Update Drawing Production Kit OpenRoads 3:45 BIM 360 Team Bentley Bentley Bentley FDOT FDOT Advanced Solutions Steve Rick Alex Mabrich Ray Filipiak Randy Roberts Chris Thorpe Jamie Owens

15 Min BREAK ✰ Learn MicroStation Tips & ✰ ✰ OpenBridge Modeler: Managing your Digital Files Tricks. Become more FDOT Signs Application OpenRoads Best Practice - FDOT Earthwork Generate Parametric 4:00 - with AVAIL Productive with for Civil 3D Geometry Stantec Templates 5:00 Advanced Solutions MicroStation FDOT Bentley Denise Broom Bentley Jamie Owens Bentley Randy Roberts Jimmie Prow Alex Mabrich "TechnologyHub Open Come - and our Sponsor visit and Support Partners!!" Steve Rick 2017 FLUG Fall Training Forum November 1st - 3rd, 2017 Tampa, Florida ✰

Thursday 2-Nov-17 General Session and Hands-On Workshops General Session General Session General Session General Session General Session General Session Workshop Workshop Workshop Workshop AECOSim Building General MicroStation CONNECT FDOT Civil 3D FDOTSS4 OpenRoads FDOT OpenRoads / MicroStation OpenBridge / OpenRoads Civil 3D Designer Brandon 1 (35) Brandon 2 (60) Brandon 3 (35) Brandon 4 (60) Brandon 6 (60) Cypress (56) Equestrian (20) Park (20) Sabal (20) Brandon 5 (35) ✰ ✰ ✰ ✰ T-1C ✰ ✰ Introducing The AECOsim Building T-1P ✰ T-1S Design Review QA/QC with Civil 3D – Tips, Tricks and FDOT Automated OpenRoads Best Practice - FDOTSS4 2D Rule Based T-1E MicroStation CONNECT Designer CONNECT Using OpenBridge Modeler and FDOT Civil 3D Automated 9:45 - Bluebeam Revu Trouble Shooting Quantities (Part 1) Terrain Modeling Roadway Design Mastering the Corridor Edition Edition Update LumenRT Quantities 10:45 Bluebeam Advanced Solutions FDOT Bentley FDOT Bentley Bentley Bentley Bentley FDOT Michael Calkins Leo Lavayen Kandi Daffin Ray Filipiak Todd Holt/Chris Thorpe/Matt Kevin Jackson Dave Mayer Mark Enos Alex Mabrich Randy Roberts Sexton

15 Min BREAK ✰ QUANTM DESKTOP Drawing with BIM enlivened – AECOsim FDOT Automated OpenRoads Best Practice - TECHNOLOGY – Road MicroStation CONNECT Building Designer & 11:00 - Quantities (Part 2) Project Management Optimization Planning for Civil Designers LumenRT 12:00 FDOT Bentley Trimble Bentley Bentley Kandi Daffin Jimmie Prow Adrien Patane Dave Mayer Mark Enos

1 1/2 Hr LUNCH

✰ ✰ AECOsim Building ✰ ✰ T-2P ✰ Get Control Over Your Using Terrain in FDOTSS4 Design Survey T-2E T-2S Lifecycle of a Civil 3D Designer for Modeling Techniques - QuickStart for Terrain and CONNECT and V8i Reference MicroStation CONNECT Deliverables for 3D Getting Started with 3D in FDOT 3R Design using Civil 1:30 - Construction Model Transportation and Ramps and Gores Geometry Using OpenRoads Files! Edition Modeling MicroStation CONNECT Edition 3D 2:30 Applied Transit Projects Bentley Technology Axiom Bentley FDOT Bentley FDOT Ken Driscol Bentley Jimmie Prow Bentley Eiren Smith Dave Mayer John Hazlip Steve Rick Mike Racca Mark Enos Christiana Holmes

15 Min BREAK ✰ Integrating Pointcloud and ✰ Conceptualize and FDOTSS4 Design Survey Image data into the Bentley Utilizing Drone and Aerial Civil 3D Parcels - I DEED AECOsim Building Communicate Your Road Complex Terrain Models 2:45 - environment through the Photos It! Designer for Owners Design with OpenRoads for 3D Design 3:45 design process Bentley Advanced Solutions Bentley ConceptStation FDOT Certainty 3D Kurt Rasmussen Leo Lavayen Mark Enos Bentley John Hazlip Mike Cook Ray Filipiak

30 Min "Snack with the Support Partners!" AECOsim Building ✰ Automated Machine Civil 3D in a Bentley Employing your 3D Designer – Tips and Tricks Using Reality Models "TechnologyHub Open Come - and our Sponsor visit and Support Partners!!" "Under Pressure" Guidance using MicroStation World - Lessons Models into Visualization for both the Select Series During Your Design 4:15 - Civil 3D Pressure Pipes OpenRoads - SR9B Case Learned Applications 6 and the CONNECT Process 5:15 David Douglas Assoc., Inc. Study Infrastructure Engineers Inc. Bentley Editions Bentley Jason Panicaro Arcadis Oscar Castaneda, P.E. Kurt Rasmussen Bentley Jimmie Prow Krissy Hoffman Mark Enos 6:00 - 8:00 "Join us at the Technology Hub for our Evening Social - Refreshments Served - Presented by FLUG and Our Partners ! " 2017 FLUG Fall Training Forum November 1st - 3rd, 2017 Tampa, Florida ✰

Friday 3-Nov-17 General Session and Hands-On Workshops General Session Workshop General Session General Session General Session General Session General Session Workshop Workshop Workshop ContextCapture/Micro ConceptStation/ General FDOT Civil 3D FDOTSS4 StormCad/SubSurface OpenRoads CONNECT FDOT OpenRoads Trimble/Civil 3D Station V8i MicroStation Brandon 1 (35) Brandon 3 (35) Brandon 4 (60) Brandon 5 (35) Brandon 6 (60) Cypress (56) Park (20) Sabal (20) Brandon 2 (60) Equestrian (20) ✰ ✰ ✰ ✰ ✰ ✰ ✰ F-1S Integrating point cloud and Reality Modeling Goes Plans Production - Civil Why you Should be Using Moving to OpenRoads F-1C F-1E FDOT Cross Sections in F-1P Comprehensive Workflow Image data for monitoring Mainstream: What’s New Geometry & Civil Cells for Subsurface Utilities and Designer - 1 Where to FDOTSS4 3D Roadway QuickStart using OpenRoads 8:30 - Civil 3D Designing with a Pond for Earthwork Quantities and surface analysis in ContextCapture 2D FDOTSS4 OpenRoads How to Get There Start Modeling ConceptStation 9:30 FDOT Bentley using Trimble’s BC-HCE Certainty 3D Bentley FDOT Bentley Bentley Bentley Bentley Mike Racca Ray Filipiak Trimble Mike Cook Kurt Rasmussen Todd Holt Christiana Holmes Kevin Jackson Alvie Griffith Jimmie Prow Mike Eason

15 Min BREAK ✰ ✰ ✰ ✰ Applying Superelevation Moving to OpenRoads InfraWorks 360 Roadway Enable Reality Modeling Grading in Civil 3D with Under the Surface with Shoulder Rollover in Designer -2 Workspace 9:45 - Design - Fasten Your Seatbelt with Your Mobile Device Feature Lines Subsurface Utilities FDOTSS4 OpenRoads Development 10:45 Applied Software Bentley CADDesk Consulting Bentley FDOT Bentley Ken Driscol Kurt Rasmussen Brian Morse Christiana Holmes Chris Thorpe Kevin Jackson

15 Min BREAK Moving to OpenRoads ✰ ✰ ✰ ✰ F-2P ✰ Civil 3D Surfaces - Editing , Designer -3 F-2S Gain the Competitive Edge Ancillary Features & QuickStart for Roadway Ahead of the Curve Copying, Pasting, StormCad in OpenRoads Understanding Civil 3D: Corridors and 11:00 - with Bluebeam Revu 2017 Borehole Navigator Modeling Using OpenRoads Bentley Combining Surfaces Bentley Workspace Files and Feature Lines 12:00 Bluebeam Stantec Technology Dave Mayer CADDesk Consulting Ray Filipiak Resources Advanced Solutions Michael Calkins Denise Broom Bentley Doug Medley Bentley Leo Lavayen Christiana Holmes "TechnologyHubourSponsor and -OpenandCome visit Support Partners!!" Kevin Jackson 1 1/2 Hr LUNCH ✰ ✰ F-2E Embracing Change: The Including Geotechnical Moving to OpenRoads Creating, Maintaining Creating a Proposed Understanding XML Modeling and Designing 2D/3D future of making "Things" in Data in an OpenRoads Designer -4 Setting up 1:30 - Custom Linestyles Design Profile in Civil 3D Reporting in OpenRoads Curves in MicroStation the Civil Industry Designer Model Drawing Seeds 2:30 Bentley CADDesk Consulting Arcadis CONNECT Edition IMAGINiT Bentley Bentley Steve Rick Brian Morse Kevin Lucht Bentley Harvey Pruit Ray Filipiak Kevin Jackson Dave Mayer

15 Min BREAK ✰ ✰ ✰ Civil 3D Cross Sections - Quality Control Checklist Using Subsurface Utility Moving to OpenRoads Title Block Batch Changes in AccuDraw Advanced (3D) Cut & Fill Volumes - & Tools for Reviewing 3D Quality Control Tools to Designer -5 Setting up 2:45 - CONNECT, V8i and AutoCAD Bentley Material Lists Engineered Models Ensure 100% Confidence Annotations 3:45 Axiom Steve Rick CADDesk Consulting FDOT Bentley Bentley Eiren Smith Doug Medley Matt Sexton Ray Filipiak Jimmie Prow 2017 FLUG Fall Training Forum Presentations - Tentative

Wednesday 11/01/2017

PDH Room Type Title Description Company Speaker Level Credits You’ve built a really great BIM model but how can you show it off to others? Using Revit Live, you can take your 3D modeled design, make it interactive and have the ability to perform a walk-thru. This session will go General Bring your 3D Revit model to life Advanced Brandon 1 through the process of creating a Revit Live presentation from a Revit model and some of the tips and tricks Jamie Owens Intermediate - Expert Session with Revit Live Solutions to keep in mind.

Many professionals enjoy the use of Trimble’s SketchUp because of the ease of drawing lines and extruding them into shapes. Meanwhile these models many times become standalone models and are for reference only once the design gets developed past preliminary design. With the use of Autodesk FormIt 360 General If you can Sketch it up, you can Professional, designers can take the same logic of creating lines into surfaces then into solids. The benefits of Advanced Brandon 1 Jamie Owens Novice - Expert Session FormIt up using FormIt, the designer can work in various different platforms, (PC Desktop, Web Browser or mobile Solutions device (iPad or Android Tablet). This class will equip attendees with the knowledge to take napkin sketches and convert them into intelligent design models that can be taken into Revit to begin the Construction Document phase. This process allows designers to start their Building Information Modeling process sooner.

Stop, Collaborate & Design This session will show the workflow and benefits of using Collaboration for Revit and BIM 360 Team in the General Advanced Brandon 1 Using Autodesk’s Collaboration design workflow. Demonstrating the power from user access of the model to sharing the design with Jamie Owens Novice - Expert Session Solutions For Revit and BIM 360 Team owners/clients.

Tired of searching through your network to find a file that you are not sure where it is at. Now with AVAIL, General Managing your Digital Files with Advanced Brandon 1 finding a file is as easy as a few clicks. With the Revit plug-in, your content library just got even easier to Jamie Owens Novice - Expert Session AVAIL Solutions manage. This demo will show you AVAIL and the ease of use inside and outside of Revit.

Want to save time in design and production? Are you adapting your civil project workflows to the way your design software works? Or would you rather speed up design and save time and money in the process allowing you to explore alternate design options? Come to this lecture and discover how to increase General Drawing Production Innovations individual and team productivity within your civil design projects without a long learning curve. Brandon 2 Bentley Steve Rick Intermediate - Expert Session in MicroStation V8i MicroStation's new drawing production innovations speed design tasks and simplify workflows. Create 2D and 3D designs with ease with the comprehensive wide range of new and enhanced production drafting tools such as the Copy Parallel Tool, Move to Contact Tool, Break Tool Consolidation, Trim to Element Tool (just to name a few) found in the newest version of MicroStation V8i (SELECTseries 3).

Spend less time and save more money by leveraging DWG data in your civil projects with MicroStation. It is a common need for civil projects to incorporate data coming from different sources. Incorporating additional data types in your civil projects produces a more accurate submittal with no need of file conversion or re- General Leveraging DWG and Other Brandon 2 drawing of geometry. MicroStation's interoperability features support a robust variety of data types such as Bentley Steve Rick Intermediate - Expert Session Formats in MicroStation AutoCAD's DWG and geographic shape files without conversion from their native format. Master how to achieve the highest fidelity for viewing, editing, and referencing other file formats. Topics covered in this session include Real DWG, object enablers and much more. 2017 FLUG Fall Training Forum Presentations - Tentative

Wednesday 11/01/2017

PDH Room Type Title Description Company Speaker Level Credits

Creating Traffic Animations that include moving traffic with multiple vehicles is labor-intensive, right ? Not anymore. MicroStation V8i (SELECTseries 3) introduces a streamlined workflow for producing compelling traffic animations saving enormous amounts of time. Streamlining the process of producing these kinds of high quality visualizations for infrastructure projects is a central focus of this Traffic Animation lecture. Maybe you have your roadway already modeled. Come discover the next simple step, animate vehicles General Brandon 2 Creating Traffic Animations moving along the roadway. The new traffic simulation tools, makes it both quick and easy to set into motion Bentley Steve Rick Novice - Expert Session literally hundred of cars along the roadway at varying speeds. Come gain the knowledge of the methods used to let you set up a traffic network of lanes, where the vehicles randomly overtake other vehicles, and to take exits or enter the highway. Select cars from a library adding cars or tractor trailer rigs to your traffic simulation. Vary their paths, speeds and distances. Discover the script traffic tool, where you can edit and delete lanes and vehicles in lanes and easily add a camera to a car to create POV traffic animations.

Learn how to increase your productivity, draw faster and smarter! In the course you will learn and get a Learn MicroStation Tips & General chance to practice a variety of tools, settings and shortcuts to help you get better understanding of drawing Brandon 2 Tricks. Become more Productive Bentley Steve Rick Novice - Expert Session creation, drawing setup, models, references, , attributes, levels, cells and printing. Live training courses with MicroStation are very interactive.

RRR Design & Modeling with Come and discover the process of using a complete set of tools for evaluation, analysis and correction of General Brandon 3 1 FDOT Civil 3D State Kit - Part 1 existing roadway cross slopes, Creating cross sections using the Existing Features Assembly, and design FDOT Mike Racca Novice - Expert Session of 2 modeling capabilities for milling, resurfacing, and overlay projects.

RRR Design & Modeling with Come and discover the process of using a complete set of tools for evaluation, analysis and correction of General Brandon 3 1 FDOT Civil 3D State Kit - Part 2 existing roadway cross slopes, Creating cross sections using the Existing Features Assembly, and design FDOT Mike Racca Intermediate - Expert Session of 2 modeling capabilities for milling, resurfacing, and overlay projects.

This session will provide an overview of the tools available in the Civil 3D State Kit and the process used to General Signalization Design using the Brandon 3 1 create a Signalized Intersection. Included in this session; Creating View Frames, Creating Sheets, Placing FDOT Randy Roberts Intermediate - Expert Session FDOT Civil 3D State Kit Details, Using Entity Manager & The FDOT Traffic Palette.

General FDOT Signs Application for Civil This session will provide an overview of the NEW palette based sign tool within the FDOT Civil 3D State Kit. Brandon 3 1 FDOT Randy Roberts Intermediate - Expert Session 3D Included in this session; Creating, Placing, Saving, Editing, and Recalling a sign assembly.

General RRR Design & Modeling with Learn to use a complete set of tools for evaluation, analysis and correction of existing roadway cross slopes Brandon 4 2 KCG Corp. Richard Perez Novice - Expert Session OpenRoads on TIN surfaces and design modeling capabilities for milling, resurfacing, and overlay projects.

Existing Features Model file General Brandon 4 (SURVRD) in FDOTSS4 Learn the recommended workflow for building the Existing Feature Model on your project. FDOT Chris Thorpe Novice - Expert Session OpenRoads This session will focus on Open Roads End Area Volume tool and the FDOT resources available to develop General Brandon 4 FDOT Earthwork earthwork quantities. Let’s learn how this tool works and what’s needed to get the earthwork quantities Stantec Denise Broom Intermediate - Expert Session you’re looking for. 2017 FLUG Fall Training Forum Presentations - Tentative

Wednesday 11/01/2017

PDH Room Type Title Description Company Speaker Level Credits Overview of the new Bentley's bridge modeling solution and what is new in the latest release. OpenBridge Modeler empowers the engineer to take full advantage of the Open Roads technology; roadway geometry General OpenBridge Modeler: What is Brandon 5 and terrain information in order to layout and study the best alternatives for a bridge location and type. Bentley Alex Mabrich Novice - Expert Session New! Then, a direct connection to LEAP Bridge, LEAP Steel or RM Bridge allows for the final design calculations of the structure

In this session, you will learn how to model different types of bridges using OpenBridge Modeler. Precast OpenBridge Modeler: How to girders, steel beams, and precast segmental boxes will be layed out in an interchange project. Then, creating General Brandon 5 1 Model Precast, Steel and the bridge model, learn how to generate geometry and quantity reports, how to connect to Bentley's Bentley Alex Mabrich Novice - Expert Session Segmental Bridges analytical software depending on the type of bridge, verify vertical and horizontal clearances and publish an i- model for further connectivity with Bentley Navigator and other field applications.

General Review of the latest updates and enhancements in the latest delivery of LEAP Bridge Enterprise, LEAP Steel Brandon 5 BrIM Analytics Product Update Bentley Alex Mabrich Novice - Expert Session and RM Bridge.

General OpenBridge Modeler: Generate In this session, you will learn how to create and manage OpenBridge Modeler Template, how to verify and Brandon 5 1 Bentley Alex Mabrich Novice - Expert Session Parametric Templates test the parametric settings before using it.

At the center of Bentley’s common modeling environment for transportation is OpenRoads. Most of you are familiar with the OpenRoads capability that’s included with InRoads, GEOPAK, and MX today. We are excited General An Introduction to OpenRoads to introduce OpenRoads CONNECT Edition – it will be a best in class roadway design solution that combines Brandon 6 1 Bentley Jimmie Prow Novice - Expert Session CONNECT Edition the InRoads, GEOPAK, and MX capabilities with new and exciting innovation making roadway design better than ever. This will include the long awaited OpenRoads edition of Bentley’s new Documentation Center capability for producing plans, profiles, and sectional drawings.

Join Bentley experts as they share tips and tricks for creating and editing OpenRoads corridor models. Many General OpenRoads Best Practice - Brandon 6 1 of these tips and tricks apply to both OpenRoads Designer, CONNECT Edition and V8i versions of InRoads, Bentley Kevin Jackson Novice - Expert Session Corridor Modeling GEOPAK, MXROAD, and PowerCivil. General OpenRoads Best Practice - Join Bentley experts for tips and tricks using the new OpenRoads Designer cross section and plan sheet Brandon 6 1 Bentley Ray Filipiak Novice - Expert Session Drawing Production layout and annotation tools.

Join Bentley experts as they share tips and tricks for creating and editing OpenRoads geometry. Many of General OpenRoads Best Practice - Brandon 6 1 these tips and tricks apply to both OpenRoads Designer, CONNECT Edition and V8i versions of InRoads, Bentley Jimmie Prow Novice - Expert Session Geometry GEOPAK, MXROAD, and PowerCivil.

In this workshop the user will learn how to create GIS friendly lines, curves and closed polygons with native W-1C Bentley Map feature attributes that meet FDOT CADD/GIS Interoperability Standards for Right of Way John Hazlip / Cypress Workshop CADD-GIS Interoperability for FDOT Novice - Expert Mapping projects. The products of this workshop will be FDOT Parcels, Alignments and Right of Way Lines Rebecca Barber Right of Way Mapping and their associated attributes.

The MicroStation CONNECT Edition features updates to many parts of the software. These updates include the introduction of a ribbon-style (GUI), a relocation of the workspace settings, a W-1E new Backstage, updated tools and dialogs, Property Driven Annotation, a new Explorer replacing Project QuickStart to MicroStation Equestrian Workshop Explorer, Annotative Hatching, Display Rules to control graphical display, Drawing and Named Boundaries to Bentley Dave Mayer Intermediate - Expert CONNECT Edition for Existing help with sheet creation, Sheet Indexing to control parameters of sheets, Attaching Data using Item Types, Users Reports and Tables, plus more! Learn to master these new and exciting features found in the MicroStation CONNECT Edition. 2017 FLUG Fall Training Forum Presentations - Tentative

Wednesday 11/01/2017

PDH Room Type Title Description Company Speaker Level Credits

This hands-on workshop will be broken down into third segments targeted for CAD technicians, survey and mapping professionals and any individual who uses TopoDOT for feature extraction.

Session 1: TopoDOT: Improvements on topography processing tools. Description: This hands-on workshop will explore the latest techniques of feature extraction for topography W-1P mapping and asset collection using TopoDOT. TopoDOT: Latest tools and Park Workshop Certainty 3D Mike Cook Novice - Expert techniques for PointCloud Data Session 2: TopoDOT: Data analysis tools. Processing Description: Dive in point cloud data analysis tools using TopoDOT in this hands-on workshop. We will run tools for surface monitoring, grade & cross slope analysis and more.

Session 3: TopoDOT: General practices Q&A session. Description: We will answer your questions on processing with TopoDOT in this live Q&A session on general practices and feature extraction workflows.

You have been asked to make an AutoCAD Civil 3D deliverable but you are only familiar with MicroStation. Get your feet wet with this introductory session on AutoCAD Civil 3D. We will take a look at some basic editing tools and where to find commands and settings in Civil 3D. You will get an overview on deliverables W-1S using the Pinellas County Civil 3D 2017 CADD Kit as well as the FDOT Civil 3D 2017 State Kit. Walk away with AutoCAD/Civil 3D for CADDesk Sabal Workshop useful skills and a game plan for next steps. Brian Morse Novice - Expert MicroStation, GeoPAK and Consulting OpenRoads Designers Brian Morse and Doug Medley have been teaching FDOT Civil 3D xxxx State Kit to MicroStation users for the past 7 years. Brian Morse has been working with Pinellas County CADD Standards for the past 17 years. We’ll keep the CADD carpet under your feet and not talk over your head. 2017 FLUG Fall Training Forum Presentations - Tentative

Thursday 11/02/2017

PDH Room Type Title Description Company Speaker Level Credits

Ball Room Keynote Drone Technology TBD Bentley / Altavian Kurt Rasmussen Novice - Expert

Design review, plan check and QA/QC are all processes that require many sets of discerning eyes to work together in a collaborative effort to move designs and drawings forward in the project lifecycle. Using Revu's General Design Review QA/QC with Brandon 1 customizable markup tools help improve clarity and standardization across teams, while Bluebeam Studio Bluebeam Michael Calkins Novice - Expert Session Bluebeam Revu brings all eyes to the same documents. In this session, we will look at features and best practices to increase clarity, consistency and efficiency while decreasing the time required for reviews.

Trimble’s Quantm technology is increasingly being used as part of Design-Build applications across North America. The technology can greatly assist contractors & designers with better bids, identifying construction cost savings and rapidly providing optimized estimates to designers allowing for greater flexibility and control QUANTM DESKTOP of their alignment construction costs. General Brandon 1 TECHNOLOGY – Road Trimble Adrien Patane Novice - Expert Session Optimization Planning This seminar is aimed at covering the fundamentals of how Quantm can be used in conjunction with BC-HCE to create & refine a 3D Geometric Design. Focus will be on highlighting key aspects attractive to contractors, allowing them to quickly generate competitive & detailed costed bids as well as improve their construction workflows.

Get Control Over Your Remove the time and frustration of managing MicroStation reference attachments and their settings, using General Brandon 1 CONNECT and V8i Reference Axiom RefManager. Axiom Eiren Smith Novice - Expert Session Files!

LiDAR systems technology produces rich content which can be used beyond the surveying and mapping deliverables. Besides collecting topography information more effectively than any other survey method, this Integrating Pointcloud and technology can be used to provide supplementary information to the design process. We will demonstrate General Image data into the Bentley the use of TopoDOT to compare design to field conditions for clearances, clash detection and surface Brandon 1 Certainty 3D Mike Cook Novice - Expert Session environment through the design monitoring. We will also show how easy it is to create data cross sections to place elevations and label process missing assets. Target Audience: Design and Transportation professionals employing LiDAR technologies for transportation corridors.

In this presentation we will discuss the challenges and lessons learned of working in a Microstation environment implementing Civil 3D for the first time. We will explore the options available to work between the 2 platforms and how you can use them to go from the .dgn to the .dwg world. We will examine the basics Civil 3D in a Bentley General of braking barriers and allowing Bentley users the opportunity to have a smooth transition coming into Infrastructure Brandon 1 MicroStation World - Lessons Oscar Castaneda Novice - Expert Session Autodesk software. Engineers Inc. Learned •Understand the difficulties in implementing Civil 3D in a Microstation-dominant environment. •Learn to use the Data Translator, including its pros and cons, to convert data between the two platforms. •Understand key differences between the two platforms. 2017 FLUG Fall Training Forum Presentations - Tentative

Thursday 11/02/2017

PDH Room Type Title Description Company Speaker Level Credits

The MicroStation CONNECT Edition features many updates to the user interface. These updates include the General Introducing The MicroStation introduction of a ribbon-style graphical user interface (GUI), a relocation of the “workspace” settings such as Brandon 2 Bentley Dave Mayer Novice - Expert Session CONNECT Edition Preferences and Configuration, and more. This course contains a set of exercises that are used to become familiar with the ribbon style interface found in the MicroStation CONNECT Edition.

In the MicroStation CONNECT Edition, there are a host of placement tools that allow you to create new drawing elements efficiently and accurately using tools such as Place SmartLine, Place Circle, Create Region, General Drawing with MicroStation and others. AccuDraw is an intuitive drawing aid that helps you to define exact distances and angles while Brandon 2 Bentley Dave Mayer Novice - Intermediate Session CONNECT for Civil Designers creating new elements or manipulating existing ones. In this course, you will utilize the Place SmartLine tool along with the aid of AccuDraw for precision placement of the lines which will make up the subdivision for your project.

In this course, you will learn to visualize imported point data on the earth surface and display Contours, General Using Terrain in MicroStation Brandon 2 1 Triangles, Voids, Islands, Flow Arrows and many other Terrain Features. You also will learn to label Contour Bentley Dave Mayer Novice - Intermediate Session CONNECT Edition and Spot Elevations. General Utilizing Drone and Aerial See how the use of aerial imagery can improve your 3D mesh models. Learn how you can merge your aerial Brandon2 Bentley Kurt Rasmussen Intermediate - Expert Session Photos and ground imagery to create one cohesive mesh model.

See how your 3D mesh of existing condition be transformed into your design. Quickly create images, videos and real-time presentations of Architecture, Landscape, Urban and Infrastructure Designs. With LumenRT, General Employing your 3D Models into Brandon2 you will 'Tell a Better Story'. Win business through more engaging user experiences while still working in Bentley Kurt Rasmussen Intermediate - Expert Session Visualization Applications Your Design System. Nothing to learn! Quickly bring your scenes to life using tools you know. Enjoy high quality graphics with real-time natural lighting.

General Civil 3D – Tips, Tricks and Whether you’re an AutoCAD Civil 3D novice or guru, there’s always opportunity for improvement. During this Brandon 3 2 Advanced Solutions Leo Lavayen Novice - Expert Session Trouble Shooting session, learn productivity enhancing tips and tricks you can apply to your daily Civil 3D workflows.

As the horizontal construction world continues to catch up with vertical world, we will dive into the use of 3D heavy civil construction models and some workflows associated with the benefits of the 3D model. General Lifecycle of a Civil 3D • Learn why building 3D models for the life of the project are important Brandon 3 1 Applied Software Ken Driscol Novice - Expert Session Construction Model • Discover why laser scanning is used to supplement field data procurement • Discover benefits of 4D modeling and virtual simulation

General Brandon 3 1 Civil 3D Parcels - I DEED It! The fundamentals of Parcels. Best ways to utilize Civil 3D Parcels, create and edit. Advanced Solutions Leo Lavayen Novice - Expert Session

This presentation will walk the user through the setup and design of pressure pipes in Civil 3D. We will discuss styles and labeling for pipes, fittings, appurtenances, etc. We will walk through the process of taking a General "Under Pressure" Civil 3D David Douglas Brandon 3 general 2d layout and converting it into Civil 3D utilizing tools within the software. We will also look at Jason Panicaro Novice - Expert Session Pressure Pipes Assoc., Inc. modifying and/or adding to the already completed design as well as utilizing tools to check for interferences and creating deflections as needed.

Learn the recommended workflow for quantity generation and documentation using Plan Summary Boxes General FDOT Automated Quantities Brandon 4 1 starting with the creation of quantities using GEOPAK's Design & Computation Manager through to the FDOT Kandi Daffin Novice - Expert Session (Part 1) creation of the Summary of Pay Items sheets. Learn the recommended workflow for quantity generation and documentation using Plan Summary Boxes General FDOT Automated Quantities Brandon 4 1 starting with the creation of quantities using GEOPAK's Design & Computation Manager through to the FDOT Kandi Daffin Novice - Expert Session (Part 2) creation of the Summary of Pay Items sheets. 2017 FLUG Fall Training Forum Presentations - Tentative

Thursday 11/02/2017

PDH Room Type Title Description Company Speaker Level Credits

The FDOT Design Survey Workflow has concentrated on the basics of the new workflow. This is an advanced session that will concentrate on details for cleaning up the Design Survey to meet the conditions that will be needed for . SURVRD File: Know your customer - Field Book vs DGN Graphics. TOPORD: Hard General FDOTSS4 Design Survey Brandon 4 surfaces have historically been a problem area - delineating surface features with a sub-base. PAVEMENT FDOT John Hazlip Intermediate - Expert Session Deliverables for 3D Modeling MARKINGS: What to pick up and why. UTILITIES: FDOT ownership vs Utility Company assets BASELINE SURVEY: Where it resides and how to use the ALGNRD file.

Working with and understanding the characteristics of multiple Terrain Models in Bentley's SS4 Open Roads FDOTSS4 Design Survey 3D Civil Models. EXAGGERATING TERRAINS: With a temporary model. General Brandon 4 Complex Terrain Models for 3D ALTERNATE TERRAIN MODELS: What to expect when creating or Importing TIN/LandXML files with and FDOT John Hazlip Intermediate - Expert Session Design without breaklines included. COMPLEX TERRAIN MODELS: Creating a single Terrain Model out of multiple overlapping Civil Terrain Models, TIN files, and LandXML files.

Automated Machine Guidance Join is for an in-depth discussion of how to share OpenRoads models using the ICM (integrated civil model). General Brandon 4 using OpenRoads - SR9B Case The discussion will explore specific settings that affect how the ICM is created and how data is mapped Arcadis Krissy Hoffman Novice - Expert Session Study between OpenRoads and other vendors systems such as the Trimble Business Center. This course is new.

Explore the improved interface, enhanced tools, and exciting new capabilities that will help you improve your General AECOsim Building Designer interoperability, collaboration, personal productivity, and information sharing. Also, see how you can Brandon 5 Bentley Mark Enos Novice - Expert Session CONNECT Edition Update explore the new personalized learning and tips without leaving the product experience with CONNECT Advisor, the new AECOsim Building Designer QuickStart sessions, and new Adaptive Learning offerings.

Enrich your AECOsim Building Designer models to make them look more realistic with LumenRT. Rendering with LumenRT not only saves your time but also provides a huge library of 3D content to add more General BIM enlivened – AECOsim innovative features to your model. Immerse buildings within a real-time visualization environment Brandon 5 Bentley Mark Enos Novice - Expert Session Building Designer & LumenRT populated with moving people, wind-swept plants with seasonal foliage, rolling clouds, rippling water, and animated vehicles. Easily share interactive, immersive 3D presentations with any stakeholder using Bentley LumenRT LiveCubes.

AECOsim Building Designer is a scalable, multi-discipline building design application that enables BIM AECOsim Building Designer for General workflows to develop and design buildings of any size or complexity from office buildings, DOT maintenance Brandon 5 Transportation and Transit Bentley Mark Enos Novice - Expert Session and support buildings, above and below ground rail stations, to multiple building mega-projects such as Projects Airports. Bentley’s federated BIM approach allows quick design alternative exploration and adaptive re-use.

It is a multidisciplinary Building Information Modeling (BIM) software, that also has features and functionality to manage building Spaces and Assets beyond Design and Construction into Operations. This session will cover the tools to Create, Manage, Report, Track, and import data on Spaces, Furniture, Fixtures, and General AECOsim Building Designer for Brandon 5 Equipment (FF&E) across multiple building Models. Building types such as Retail, Office, Healthcare, and Bentley Mark Enos Novice - Expert Session Owners Manufacturing, will be explored. Owners can even leverage existing facilities data by promoting legacy 2D CAD graphics to intelligent building spaces and assets for Space Planning without modeling the entire facility in 3D. AECOsim Building Designer can also reference other BIM models via IFC and Revit® i-models. 2017 FLUG Fall Training Forum Presentations - Tentative

Thursday 11/02/2017

PDH Room Type Title Description Company Speaker Level Credits AECOsim Building Designer – Tips & Tricks will range from Modeling concepts, Drawing Creation, Reporting and Schedules, DataSet General Tips and Tricks for both the Brandon 5 management, BIM properties in 3D , as well as interoperability with other file types such as RFA content, Bentley Mark Enos Novice - Expert Session Select Series 6 and the 3MX, , and Revit i-models. CONNECT Editions

Tips and tricks for working with terrain models including the best way to create a single terrain from multiple General OpenRoads Best Practice - corridors and linear templates, how to create and use graphical filters to create a single composite terrain, Brandon 6 1 Bentley Ray Filipiak Novice - Expert Session Terrain Modeling how to export the terrain to other formats, and more... Many of these tips and tricks apply to both OpenRoads Designer, CONNECT Edition and V8i versions of InRoads, GEOPAK, MXROAD, and PowerCivil.

Join Bentley experts as they share recommendations for organizing OpenRoads project data, files, and General OpenRoads Best Practice - references. Federating and organizing project data, files, and references properly can make all the difference Brandon 6 Bentley Jimmie Prow Novice - Expert Session Project Management in the efficiency of OpenRoads and your design environment. Many of these tips and tricks apply to both OpenRoads Designer, CONNECT Edition and V8i versions of InRoads, GEOPAK, MXROAD, and PowerCivil.

General Modeling Techniques - Ramps Join Bentley experts to learn recommended techniques to model ramps and gores as part of your mainline Brandon 6 1 Bentley Jimmie Prow Novice - Expert Session and Gores roadway corridors.

OpenRoads ConceptStation helps you jump-start your projects by rapidly creating conceptual models that allow you to evaluate design alternatives and estimated costs faster, resulting in improved project decisions. Conceptualize and General Use OpenRoads ConceptStation's powerful modeling capabilities to model roads, rail, intersections, bridges, Brandon 6 1 Communicate Your Road Design Bentley Ray Filipiak Novice - Expert Session tunnels and more. Continuously updated estimated project costs make it easy to evaluate design alternatives with OpenRoads ConceptStation and options. The conceptual models are easily shared with the public and stakeholders using the built in realistic visualizations capabilities.

This presentation covers how a design engineer can quickly create a reality model to use during the design General Using Reality Models During Brandon 6 1 process. From snapping a few photos in the field with a cell phone to a 3D model you can use in the design in Bentley Jimmie Prow Novice - Expert Session Your Design Process a few easy steps using ContextCapture.

Participants will use FDOTSS4 to develop rule based 2D geometry using Bentley’s OpenRoads technology. Students will learn to apply design criteria, Horizontal & vertical geometry, civil cells and how to import/export date from GPK and XML files Workshop Exercises include: • Create Civil Geometry Features in the design file to calculate and define a proposed centerline of construction. T-1C • Apply FDOT Standard Design Criteria validation and reporting. Todd Holt/Chris Cypress Workshop 5 FDOTSS4 2D Rule Based FDOT Novice - Expert • Create Civil Geometry Features in the design file to define the 2D roadway design plan for the proposed Thorpe/Matt Sexton Roadway Design project. • Place several FDOT Civil Cells delivered from within the FDOTSS4 Civil Cell DGN library and modify to meet specific project requirements. • Create Civil Geometry Features in the design file to define the vertical profiles for a proposed centerline. • Save and import data from XML and GPK files. 2017 FLUG Fall Training Forum Presentations - Tentative

Thursday 11/02/2017

PDH Room Type Title Description Company Speaker Level Credits

This course teaches the core skills necessary to work with corridors. The course begins with what 2D and 3D elements get created and how the 2D and 3D models interact with one another. Next you will learn how to T-1E Equestrian Workshop 2 work with multiple templates in a single corridor and transition between them. You will learn how to Bentley Kevin Jackson Intermediate - Expert Mastering the Corridor override template geometry with Point Controls and End Condition Exceptions, how to something other than the existing terrain, and how to assign Superelevation to a corridor.

T-2E Learning 3 Dimensional drawing with MicroStation Connect Edition is an extension of your knowledge of 2 Equestrian Workshop Getting Started with 3D in Dimensional drawing. If you can draw in 2 Dimensions (2D), then all that is needed is to learn how to Bentley Steve Rick Novice - Intermediate MicroStation CONNECT Edition manipulate the AccuDraw compass in 3 Dimensional (3D) space.

This hands-on workshop will introduce you to OpenBridge Modeler and LumenRT. You will learn how to T-1P create a precast girder bridge model. This includes modeling the deck, beams, piers and abutments, bearings Park Workshop 2 Using OpenBridge Modeler and Bentley Alex Mabrich Novice - Intermediate and traffic barriers. Following the creation of the model, you will transition this model to visualization with LumenRT OpenBridge Modeler and LumenRT.

This course is for both new users and users upgrading from previous versions of PowerCivil, Power GEOPAK, T-2P MX, and Power InRoads software to use the OpenRoads Technology SELECTseries 4. You will learn to use the QuickStart for Terrain and software to setup working files, attach existing ground terrain and aerial imagery, and define horizontal and Park Workshop 3 Bentley Christiana Holmes Novice - Expert Geometry Using OpenRoads vertical geometry. After completing this course we recommend you continue your learning with the Technology QuickStart for Roadway Modeling Using OpenRoads course where you will learn how to model a roadway corridor and intersection.

T-1S This workshop will provide exercises using the FDOT Civil3D 2018 State Kit to step through the Sabal Workshop 2 FDOT Civil 3D Automated recommended workflow for the automation of plan quantities, this workshop will cover creation of Summary FDOT Randy Roberts Novice - Intermediate Quantities of Pay Item Sheets, Linking the Spreadsheet reports to the design files, editing the reports, & best practices.

Come and discover the process of using a complete set of tools for evaluation, analysis and correction of T-2S Sabal Workshop 3 existing roadway cross slopes, Creating cross sections using the Existing Features Assembly, and design FDOT Mike Racca Intermediate - Expert FDOT 3R Design using Civil 3D modeling capabilities for milling, resurfacing, and overlay projects. 2017 FLUG Fall Training Forum Presentations - Tentative

Friday 11/03/2017

PDH Room Type Title Description Company Speaker Level Credits

Learn uses of LiDAR data beyond GIS and Survey products. Point cloud data analysis has become an integral part of design and construction. We’ll demonstrate surface monitoring over time, grade & cross slope Integrating point cloud and analysis, Pavement Condition Index (PCI) analysis, speed advisory analysis, clash detection techniques and Brandon 1 General Session Image data for monitoring and much more. Target Audience: Certainty 3D Mike Cook Novice - Expert surface analysis and Surveying professionals employing LiDAR technologies for analyzing existing conditions or conditions over time.

InfraWorks 360 Roadway Understand the capabilities of Roadway Design for InfraWorks 360 software. Learn how to create, edit, and Brandon 1 General Session 1 Applied Software Ken Driscol Novice - Expert Design - Fasten Your Seatbelt stylize roads using the tools in Roadway Design for InfraWorks 360

Discover the latest features included in Bluebeam Revu, the digital workflow and collaboration solution Gain the Competitive Edge trusted by over 1 million architecture, engineering and construction professionals worldwide. In this session, Brandon 1 General Session Bluebeam Michael Calkins Novice - Expert with Bluebeam Revu 2017 you will get an in-depth look at how the enhanced PDF-based takeoff and workflow automation tools released in Revu 2017 span the entire project lifecycle and maximize workflow efficiency.

In this session, we will discuss how to effectively adjust to the technical disruptions of today and the future. Embracing Change: The future We will also look at industry solutions to disruptions past and future as well as new workflows that enable Brandon 1 General Session of making "Things" in the Civil IMAGINiT Harvey Pruit Novice - Expert more productivity and reduced risks. Industry

Title Block Batch Changes in Covers tag, block attribute and text-based title blocks. Also covers tag and block attribute batch editing, using Brandon 1 General Session Axiom Eiren Smith Novice - Expert CONNECT, V8i and AutoCAD Axiom Title Block Manager.

Reality Modeling Goes With ContextCapture, Bentley is making Reality Modeling available to everyone. ContextCapture offers more Brandon 2 General Session Mainstream: What’s New in formats and inputs, combines digital imagery and point-cloud data, and leverages mobile and cloud Bentley Kurt Rasmussen Novice - Expert ContextCapture technology. Discover how you can create models of your existing conditions without leaving the project site using Enable Reality Modeling with Brandon 2 General Session Bentley’s ContextCapture mobile app. Capture your asset, upload them, and obtain a comprehensive 3D Bentley Kurt Rasmussen Novice - Expert Your Mobile Device reality model within minutes using the latest cloud technology. From point and composite curves to b-splines, MicroStation offers an extensive set of tools for creating and editing curve geometry. In this session we will take a look at circumstances where these tools might be used, Brandon 2 General Session Ahead of the Curve Bentley Dave Mayer Novice -Intermediate how curves can be placed, manipulated and refined and how curves serve as the foundation for more complex geometry. Learn how to create and maintain custom linestyles, gain an understanding of Linestyle terminology, what do Creating, Maintaining Custom Brandon 2 General Session all those options mean and discuss storage of them in RSC vs. DGNLIB? Live training courses are very Bentley Steve Rick Intermediate - Expert Linestyles interactive.

Once you are comfortable with the basics of AccuDraw in 2D, and if you have a need or are just curious about working in 3D, it’s time to go the next step with AccuDraw. Learn how AccuDraw behaves in the 3D Brandon 2 General Session AccuDraw Advanced (3D) Bentley Steve Rick Intermediate - Expert world and how to control the AccuDraw Compass to assist you. Take the concepts you already know about working with AccuDraw in 2D and how they function in 3D. Live training courses are very interactive.

This session shows how to convert existing utility linework into pipe networks that can be projected into Brandon 3 General Session 1 FDOT Cross Sections in Civil 3D FDOT Mike Racca Novice - Expert section views 2017 FLUG Fall Training Forum Presentations - Tentative

Friday 11/03/2017

PDH Room Type Title Description Company Speaker Level Credits

This session will provide an overview of the process of creating Gradings using Feature Lines and how Grading in Civil 3D with Manipulating the Feature Line elevations effects the Surface, also will show how to target corridor feature CADDesk Consulting Brandon 3 General Session 1 Brian Morse Novice - Expert Feature Lines lines. Included in this session is; Grading Criteria, Surface Creation, Feature Line Editing, Raising/Lowering Resources Surface, Grading Feature Lines, and Corridor Feature Lines

Civil 3D Surfaces - Editing , This session will provide an overview of the process of Creating Surfaces and Pasting surfaces into other CADDesk Consulting Brandon 3 General Session 1 Copying, Pasting, Combining drawing files and into other Surfaces. Included in this session is; Surface Creation, Extracting Surfaces, Pasting Doug Medley Novice - Expert Resources Surfaces Surfaces, Exporting Surfaces as XML files

This session will provide an overview of the process of Creating and Editing a Proposed Deign Profile using Creating a Proposed Design CADDesk Consulting Brandon 3 General Session 1 FDOT Standards. Included in this session; Creating Surface Profiles, Vertical Geometry Tools, Labeling Curves Brian Morse Novice - Expert Profile in Civil 3D Resources and Tangents

This session will provide an overview of the process of Creating Cross Sections with a Material List that will Civil 3D Cross Sections - Cut & CADDesk Consulting Brandon 3 General Session 1 calculate and list volumns in the FInished Sheets. Included in this session; Sample Line Groups, Section View Doug Medley Novice - Expert Fill Volumes - Material Lists Resources Creation, FDOT Material List, Sheet Creation, and Data Shortcuts.

Design intent describes the geometry rules OpenRoads creates defining how geometry elements relate to other geometry elements and to graphic elements. You determine how rules are defined based on your Plans Production - Civil actions and sequence when creating and editing geometry. Having a good understanding of what rules get Brandon 4 General Session 1 Geometry & Civil Cells for 2D FDOT Todd Holt Novice - Expert created and when is essential when creating civil design models. During this session we will discuss when FDOTSS4 OpenRoads rules are created, best practices for creating geometry (and rules) for different situations, and how and when it is appropriate to drop rules.

This course is for both new users and users upgrading from previous versions of GEOPAK software to use the OpenRoads Technology in SELECTseries 3 & 4. You will learn the basics of placing civil cells. This includes Applying Superelevation gaining an understanding of what civil cell references are and how to use them in a practical workflow. You Brandon 4 General Session 1 Shoulder Rollover in FDOTSS4 will learn to use the civil cells delivered with the product, as well as how to use civil cells taken from external FDOT Chris Thorpe Intermediate - Expert OpenRoads sources and incorporate them into your models. You will learn to edit and re-use civil cells that have been placed within a model.

Ancillary Features & Borehole Navigator are GEOPAK tools commonly used to add feature information to the Ancillary Features & Borehole Brandon 4 General Session 1 cross sections. Please join us in learning about these tools and how they can be used to increase productivity Stantec Denise Broom Novice - Expert Navigator and save time.

In this hands-on course, you will learn to evaluate drainage structures multiple ways including Element Understanding XML Reporting Information and Properties tools, analytic views like labels and color-coding, FlexTables, and queries to filter Brandon 4 General Session Arcadis Kevin Lucht Novice - Expert in OpenRoads specific criteria. You will also learn to detect hard and soft utility conflicts and finally you will place inlets and pipes.

In this hands-on course, you will learn to evaluate drainage structures multiple ways including Element Quality Control Checklist & Information and Properties tools, analytic views like labels and color-coding, FlexTables, and queries to filter Brandon 4 General Session 1 Tools for Reviewing 3D FDOT Matt Sexton Novice - Expert specific criteria. You will also learn to detect hard and soft utility conflicts and finally you will place inlets and Engineered Models pipes. 2017 FLUG Fall Training Forum Presentations - Tentative

Friday 11/03/2017

PDH Room Type Title Description Company Speaker Level Credits

Can OpenRoads Subsurface Utilities design drainage systems like you currently do? Yes it can. Does Why you Should be Using OpenRoads Subsurface Utilities provide me additional capabilities and benefits? Yes it does. What do I need Brandon 5 General Session 1 Subsurface Utilities and How Bentley Christiana Holmes Novice - Expert to know before implementing Subsurface Utilities? How do I ensure success when implementing Subsurface to Get There Utilities? Join us to answer these and other questions during this session.

Building a drainage model is fast and easy, but a LOT happens under the surface when you click Subsurface Utilities buttons. This presentation digs into how OpenRoads and StormCAD unite to provide a Under the Surface with Brandon 5 General Session 1 comprehensive drainage and utility solution. What happens when you click Place Node? or Place Conduit? or Bentley Christiana Holmes Novice - Expert Subsurface Utilities Compute? How do you confirm the results you got? Where did those newly designed pipe sizes come from? How do you constrain the design to your needs? Join us as we answer these questions.

Explore the drainage design capabilities of StormCAD for OpenRoads. We will cover layout of drainage networks, hydraulic analysis of surface inlets and underground piping networks, and see how the use of Brandon 5 General Session 1 StormCad for OpenRoads Bentley Ray Filipiak Novice - Expert scenarios can help you explore options for your drainage design. We will also explore some advanced drainage capabilities.

Including Geotechnical Data in gINT Civil Tools provide the civil designer an easy way to include geotechnical and other data from a gINT Brandon 5 General Session 1 Bentley Ray Filipiak Novice - Expert an OpenRoads Designer Model database in their OpenRoads Designer model.

The Haestad storm water algorithms have been accurately designing projects for decades. How do you Using Subsurface Utility KNOW your project is correctly modeled? Subsurface Utilities has extensive Quality Control tools. In this Brandon 5 General Session 1 Quality Control Tools to Ensure Bentley Ray Filipiak Novice - Expert presentation we will explore the built-in tools and what is set up for Quality Control in the delivered 100% Confidence workspace. Be ready! Be confident!

During this session we will consider the migration path options for moving to OpenRoads Designer from Moving to OpenRoads InRoads, GEOPAK, MXROAD, and PowerCivil SELECTseries 2, 3, and 4 software. Learn what can be done, the Brandon 6 General Session Bentley Kevin Jackson Novice - Expert Designer - 1 Where to Start minimum that must be done, and what Bentley resources and services are available to assist you.

OpenRoads Designer is delivered with a workspace structure designed to be flexible and extendable for Moving to OpenRoads agencies, consulting firms, and users large and small. Different organizations have different workspace needs Brandon 6 General Session Designer - 2 Workspace and those needs are frequently different from project to project. The OpenRoads Designer workspace has Bentley Kevin Jackson Novice - Expert Development been reconfigured to meet the needs of production environments while minimizing the need for you to be a configuration variable expert to setup your projects. This session will explain in simple terms how to use the

Do I need Element Templates? How do I change the color of a Feature created by a template? How do I get Moving to OpenRoads my models to show textures and materials? If you have these or similar questions, don't miss this session! Designer - 3 Understanding Brandon 6 General Session OpenRoads Designer uses on an assembly of DGNLIB files, resource files, libraries, and configuration variables Bentley Kevin Jackson Novice - Expert Workspace Files and that determine how the software behaves. During this session we will discuss important aspects of what is Resources stored in these files and libraries.

Moving to OpenRoads During this session we will discuss all of the details, tips, and tricks to setup the drawing seeds used by the Brandon 6 General Session Designer - 4 Setting up Bentley Kevin Jackson Novice - Expert new OpenRoads Designer cross section and plan sheet tools. Drawing Seeds Moving to OpenRoads During this session we will discuss all of the details, tips, and tricks to setup definitions for the new Brandon 6 General Session Designer - 5 Setting up Bentley Jimmie Prow Novice - Expert OpenRoads Designer annotation tools. Annotation 2017 FLUG Fall Training Forum Presentations - Tentative

Friday 11/03/2017

PDH Room Type Title Description Company Speaker Level Credits

Participants will be introduced to Bentley PowerGEOPAK V8i SELECT Series4 (SS4) OpenRoads Technology Civil Tools; specifically Corridor, Surface Terrain, and Linear Template tools for creating 3D Roadway Design models using the Florida Department of Transportation FDOTSS4 Workspace. Workshop Exercises include: • Create a Terrain Element from the existing surface TIN file to be used as a reference for the project. • Develop Existing Feature 3D model to be shown on cross sections and used in earthwork calculations. F-1C Cypress Workshop 5 • Create 3D Corridor Models of the proposed Roadways for both New Construction and Re-Surfacing. Bentley Alvie Griffith Intermediate - Expert FDOTSS4 3D Modeling • Add 2D Civil Geometry features as references to the Corridor Models for use as design model control lines. • Apply Parametric Constraints for varying template conditions along the corridor. • View Cross Sections for review, updates, and design checks along the project. • Apply Superelevation to the Corridor Model. • Create an animated drive through of the project.

This course is an introduction to the OpenRoads ConceptStation software. In this course you will learn how to F-1E import data for existing conditions, and how to create conceptual roadway designs that include road Equestrian Workshop 3 QuickStart using OpenRoads Bentley Jimmie Prow Novice - Expert corridors and their interactions with intersections, bridges and ramps, including lighting, guardrail and street ConceptStation markings. This course will be taught using the OpenRoads ConceptStation, CONNECT Edition software.

This course is for MicroStation CONNECT users from any discipline, modeling or designing 2D/3 D curves for F-2E functional purpose. It covers end to end workflow of creating curves like helices and spirals used in Modeling and Designing engineering. Both their accurate and approximate forms (using lines and arcs) are presented for some Equestrian Workshop Bentley Dave Mayer Novice - Expert 2D/3D Curves in MicroStation variations like Archimedes and Logarithmic spirals. Geometric concepts like continuity of tangents are CONNECT Edition explained and applied for smoother approximations. Finally, creation of any curve using its mathematical formulation is covered.

In this course, you will learn how to create a design that includes a pond, including the topology and the F-1P Park Workshop 2 flowrate. Bentley Ray Filipiak Intermediate - Expert Designing with a Pond

This course is for both new users and users upgrading from previous versions of PowerCivil, Power GEOPAK, MX, and Power InRoads software to use the OpenRoads Technology. You will learn to model the roadway F-2P corridor using an existing 2 lane urban typical section with curb and cutter and sidewalk, control the QuickStart for Roadway Park Workshop 3 pavement with geometry, and review the 3D corridor model. You will also model a T intersection complete Bentley Christiana Holmes Novice - Intermediate Modeling Using OpenRoads with curb returns and side slopes using a civil cell. Finally, you will place pavement markings on the model. Technology Before completing this course we recommend you complete the QuickStart for Terrain & Geometry Using OpenRoads course.

With the Multi-Line Quantity Software rapidly nearing the end of its lifespan an alternative solution to F-15 obtaining construction quantities is needed. Trimble’s Business Center HCE software provides a more Comprehensive Workflow for modern and accurate approach to fill this need. This is a hands on guide on for using Business Center HCE to; Sabal Workshop 3 Trimble Mike Eason Novice - Expert Earthwork Quantities using Import the EOR’s design data along with the as-built data provided by either the contractor’s or CEI’s Trimble’s BC-HCE surveyor, Calculate accurate earthwork quantities, & Create a professional earthwork report and roadway cross-section sheets that are ready to be printed. 2017 FLUG Fall Training Forum Presentations - Tentative

Friday 11/03/2017

PDH Room Type Title Description Company Speaker Level Credits

This session is intended to show advanced features to maximize the creations of Corridors using Feature F-2S Lines as baselines and targets. Civil 3D 2017 added the functionality to use Feature Lines as Corridors the Sabal Workshop 2 Civil 3D: Corridors and Feature Horizontal or Vertical Baselines and was improved in the 2018 release. This course is NOT intended to Advanced Solutions Leo Lavayen Novice - Expert Lines explain the creation or editing of feature lines or corridors. It will be a fast-paced adventure into exploring several multiple scenarios.