AAlllliiss CChhaallmmeerrss Operator’s Manual
8 & 8B Crawler Operator’s Manual
THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF ALLIS CHALMERS OR IT’S SUCCESSORS. ALLIS CHALMERS AND IT’S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY OR ACCURACY OF THIS MANUAL.
TRADE MARKS AND TRADE NAMES CONTAINED AND USED HEREIN ARE THOSE OF OTHERS, AND ARE USED HERE IN A DESCRIPTIVE SENSE TO REFER TO THE PRODUCTS OF OTHERS. AC-O-8 CLR FIATALLIS®
8-8 crawler tractor operation and maintenance instruction manual
Form 70690758 English FOREWORD
Always furnish serial number if making an inquiry to Dealer or factory about this vehicle.
Many equipment owners employ Dealer's Service Department for all work other than routine lubrication and minor service. This practice is encouraged, as our Dealers are well informed and equipped to render excellent service.
This manual may not be reprinted or reproduced, either in whole or in part, without written permission of Fiat-Allis.
~------IMPORTANT ------,
The information in this manual was current at the time of publication. It is our policy to constantly improve our pro duct; therefore, design changes may affect procedures out lined in this manual. If variances are observed, verify the information through your Dealer.
PUBLICATIONS AVAILABLE FOR MODEL 8B CRAWLER TRACTOR
DESCRIPTION ENGLISH
PARTS CATALOG Crawler Tractor
OPERATION AND MAINTENANCE INSTRUCTION MANUAL 70690758
SERVICE MANUALS Service Specifications 70698542
NOTICE
CONSULT FIAT-ALLIS CONSTRUCTION MACHINERY DEALER FOR PUBLICATIONS. SEE CONSTRUCTION MACHINERY TECHNICAL PUBLICATIONS INDEX (FORM 70658800) FOR ALL AVAILABLE PUBLICATIONS. PUBLICATIONS INDEX (FORM 70658800) IS AVAILABLE FREE FROM YOUR DEALER.
study SAFETY RULES, pages 1 thru 6, thoroughly for the protection of personal and machine safety.
7 TABLE OF CONTENTS
SUBJECT PAGE
SAFETY RULES 1
FOREWORD .. 7
PUBLICATIONS AVAILABLE 7
SERIAL NUMBER LOCATIONS 10
TRACTOR BREAK-IN 11
OPERATING WARNINGS 12
OPERATING CONTROLS AND INSTRUlVIENTS 13 Operating Controls 13 Instruments 16
PREPARATION FOR USE 18
OPERATING INSTRUCTIONS 20
COLD WEATHER PRECAUTIONS 33
PREPARATION FOR STORAGE . 33
LUBRICATION AND SERVICE INSTRUCTIONS 37 General ...... 37 Lubrication and Service Guide 35 Fuel and Lubricant Specifications 36 10 Hour (or daily) Services . . 38 50 Hour (or weekly) Services . 41 100 Hour (2 weeks) Services 41 250 Hour (or monthly) Services 42 500 Hour (3 months) Services . 45 1000 Hour (6 months) Services 48 2000 Hour (or yearly) Services 50 Periodic Services (perform as required) 51
ELECTRICAL SYSTEM 55 8B BULLDOZER . 58 SPE CIFICATIONS . . 62
Study SAFETY RULES, pages 1 thru 6, thoroughly for the protection of personal and machine safety.
8 T-81633 L..------FIG. 1 - 8B ANGLEDOZER------'
Study SAFETY RULES, pages 1 thru 6, thoroughly for the protection of personal and machine safety.
9 SERIAL NUMBER LOCATIONS
T-81634 T-81636 FIG. 2 - TYPE .AND TRACTOR FIG. 4 - CHASSIS AND ENGINE DATA SERIAL NUMBER IDENTIFICATION PLATE
f?J[~5
,::-~.-~" .. ,.".~
.;~ .
T-81635 T-81637 FIG. 3 - TYPE AND ENGINE FIG. 5 - DOZER SERIAL NUMBER SERIAL NUMBER (For the ripper number, see the chassis number plate)
SERVICE SPARE PARTS
Repairs involving major disassembly opera To ensure efficient operation of your ma tion should be entrusted to a Fiat-Allis chine, it is essential that all worn and/or authorized service center where skilled damaged parts be replaced with genuine personnel and suitable equipment, as well Fiat-Allis parts. as genuine spare parts. are available. In placing your order, please specify: - type and chassis number The Fiat-Allis Service Department is at - type and engine number your full disposal for any suggestions or - catalog part number(s) of spare(s) advice you may need should the machine required. develop possible operational troubles. When ordering equipment parts (dozer/or ripper), indicate the type and part number involved.
Study SAF ETY RULES, pages 1 thru 6, thoroughly for the protection of personal and machine safety.
10