S6 Flash Memory Controller S6

S6 Flash Memory Controller

The Hyperstone S6 Flash Memory Controller together with provided application and flash specific firmware offers an easy- S6 Block Diagram Controller & CPU Flash Memory Interface & Handling to-use turnkey platform for high reliability and performance flash solutions compliant to MMC4.2 and SD 2.0 interfaces. n High performance 32-Bit Hyperstone RISC microprocessor n Dual channel direct flash memory access (DFA) n 10 to 60 MHz clock frequency using adjustable internal n Supporting all control signal for NAND type flash memory n Patented wear leveling together with ECC ensuring highest reliability and endurance oscillator connection Instruction Register File for RISC Unit 1.8V Core Regulator n Optimized 32-Bit RISC core, instruction set, and firmware for flash handling Cache 96 Registers 32-Bit Wide n 16 KB internal Boot ROM n Supporting direct connection of up to 4 flash memory chip n Dual channel Direct Flash Access unit (DFA) for interleaved operations 1.8V Flash Regulator n 20 KB internal RAM enables (CE) – 2 per channel n Large sector buffers for highest MLC performance n Card operation current of less than 25 mA n 2 times 4KB large page buffers per channel achieving optimal Interrupt 1.8V – 3.3V Charge Pump n Most power efficient design together with power saving features ALU/Shifter n Automatic power-down mode during wait periods, power performance for SLC and MLC flash chips with 4KB page size Controller 32-Bit n Smart and custom features possible by simple firmware upgrades Channel 0 saving mode incl. automatic wake-up and sleep mode with n Flash memory power down logic and flash memory write n Additional UART to connect external devices such as security controllers Icc < 120 µA protect control 2 x 4KByte Flash n ASSP with no need for external voltage regulators, detectors or diodes 32-Bit Timer Sector Buffer Control n Dual supply voltage 1.8V and 3.3V n Error Correcting Code (ECC) capable of correcting 4 symbols n Exceptional power loss protection also with MLC flash through optimized firmware handling n On-chip voltage regulator for 1.8V and charge pump for in a 512 Bytes sector with additional CRC n Turnkey solution including firmware, manufacturing kit, test and development hardware, and reference schematics for Load/ SRAM ECC/CRC 3.0V flash memory power supply n Supporting all current and future vendor flashes and techno- DFA Store Unit 20 KByte Unit n SD Card or MMC Watchdog On-chip voltage regulator for 1.8V processor core supply logies (NAND, AG-AND, MLC/SLC, NROM, …) by firmware 4 Flash n Internal voltage detector upgrades Memory Targeted Applications Compliance & Performance n Optimized die size, shape and pad layout for multi die n Firmware storage in flash memory Chips n SecureDigitial™ – SD Cards for industrial and consumer n Fully compliant to SD 1.01, 1.10, and 2.0 standards Power Down packages, and die stacking n Firmware is loaded into internal memory by the boot ROM 8-Bit wide applications n Fully compliant to MMC 3.31, 4.1, and 4.2 standards Control n Flash management including mapping of logical block n microSD cards for consumer and mobile applications n 2 times 4KB large page buffers per channel achieving optimal addresses (LBA) to corresponding physical block addresses (PBA) ECC/CRC n MultiMediaCards™ (MMC) Bus ROM DFA n performance for SLC and MLC flash chips with 4KB page size Bus Interface 16 KByte Unit Host Interface & Compliance Bad Block Management Controller n eMMC embedded Flash n Sustained read and write up to 24 and 23 MB/s respectively n Fully compliant to the SD 1.01, 1.10, and 2.0 (SDHC) n Wear leveling n n Multi-Chip-Packages (MCP) using SLC in SD mode 32-Bit RISC Core 2 x 4KByte Flash standards Power Loss Protection n SmartCards n Sustained read and write up to 22 and 9 MB/s respectively Sector Buffer Control n Fully compliant to MMC 3.31, 4.1, and 4.2 standards n Interleaving, cache, and multi-plane programming

using MLC in SD mode Channel 1 n Additional General Purpose UART and optional … and many more n Sustained read and write up to 42 and 25 MB/s respectively ISO 7816-3 interface Order Information using SLC in MMC mode n n S6-LAK05 --- LGA 54, RoHS, -25 to +85 °C Sustained read and write up to 42 and 9 MB/s respectively UART 1 Debug n S6-0ABD0 --- KGD / Wafer using MLC in MMC mode Control Card SD/MMC Logic interface Register n Data transfer rate to flash-memory of up to 40MB/s per channel UART 2 Encryption SD 2.0/MMC4.2 Interface The Hyperstone S6 Flash Memory Controller together with provided application and flash specific firmware offers an easy- S6 Block Diagram Controller & CPU Flash Memory Interface & Handling to-use turnkey platform for high reliability and performance flash solutions compliant to MMC4.2 and SD 2.0 interfaces. n High performance 32-Bit Hyperstone RISC microprocessor n Dual channel direct flash memory access (DFA) n 10 to 60 MHz clock frequency using adjustable internal n Supporting all control signal for NAND type flash memory n Patented wear leveling together with ECC ensuring highest reliability and endurance oscillator connection Instruction Register File for RISC Unit 1.8V Core Regulator n Optimized 32-Bit RISC core, instruction set, and firmware for flash handling Cache 96 Registers 32-Bit Wide n 16 KB internal Boot ROM n Supporting direct connection of up to 4 flash memory chip n Dual channel Direct Flash Access unit (DFA) for interleaved operations 1.8V Flash Regulator n 20 KB internal RAM enables (CE) – 2 per channel n Large sector buffers for highest MLC performance n Card operation current of less than 25 mA n 2 times 4KB large page buffers per channel achieving optimal Interrupt 1.8V – 3.3V Charge Pump n Most power efficient design together with power saving features ALU/Shifter n Automatic power-down mode during wait periods, power performance for SLC and MLC flash chips with 4KB page size Controller 32-Bit n Smart and custom features possible by simple firmware upgrades Channel 0 saving mode incl. automatic wake-up and sleep mode with n Flash memory power down logic and flash memory write n Additional UART to connect external devices such as security controllers Icc < 120 µA protect control 2 x 4KByte Flash n ASSP with no need for external voltage regulators, detectors or diodes 32-Bit Timer Sector Buffer Control n Dual supply voltage 1.8V and 3.3V n Error Correcting Code (ECC) capable of correcting 4 symbols n Exceptional power loss protection also with MLC flash through optimized firmware handling n On-chip voltage regulator for 1.8V and charge pump for in a 512 Bytes sector with additional CRC n Turnkey solution including firmware, manufacturing kit, test and development hardware, and reference schematics for Load/ SRAM ECC/CRC 3.0V flash memory power supply n Supporting all current and future vendor flashes and techno- DFA Store Unit 20 KByte Unit n SD Card or MMC Watchdog On-chip voltage regulator for 1.8V processor core supply logies (NAND, AG-AND, MLC/SLC, NROM, …) by firmware 4 Flash n Internal voltage detector upgrades Memory Targeted Applications Compliance & Performance n Optimized die size, shape and pad layout for multi die n Firmware storage in flash memory Chips n SecureDigitial™ – SD Cards for industrial and consumer n Fully compliant to SD 1.01, 1.10, and 2.0 standards Power Down packages, and die stacking n Firmware is loaded into internal memory by the boot ROM 8-Bit wide applications n Fully compliant to MMC 3.31, 4.1, and 4.2 standards Control n Flash management including mapping of logical block n microSD cards for consumer and mobile applications n 2 times 4KB large page buffers per channel achieving optimal addresses (LBA) to corresponding physical block addresses (PBA) ECC/CRC n MultiMediaCards™ (MMC) Bus ROM DFA n performance for SLC and MLC flash chips with 4KB page size Bus Interface 16 KByte Unit Host Interface & Compliance Bad Block Management Controller n eMMC embedded Flash n Sustained read and write up to 24 and 23 MB/s respectively n Fully compliant to the SD 1.01, 1.10, and 2.0 (SDHC) n Wear leveling n n Multi-Chip-Packages (MCP) using SLC in SD mode 32-Bit RISC Core 2 x 4KByte Flash standards Power Loss Protection n SmartCards n Sustained read and write up to 22 and 9 MB/s respectively Sector Buffer Control n Fully compliant to MMC 3.31, 4.1, and 4.2 standards n Interleaving, cache, and multi-plane programming

Content is subject to change without prior notice. S6 is a trademark of Hyperstone GmbH. Other brand, product, or company names are property of the respective holder. Warranties, implied or expressed as well as liabilities for any damage resulting from using provided information in this document are excluded until part of a separate written contract. HS-Mkt-AM-08-02-02