Band FAQs INTERNAL

HUAWEI Band FAQs

2015-12-2 Huawei Confidential Page 1of 35

HUAWEI Band FAQs INTERNAL

Contents

1 Introduction to the Band ...... 1

2 How long is the battery life? ...... 3

3 Which phone models are compatible with the Band? ...... 3

4 What is the difference between the Band, the TalkBand B1, TalkBand B2, and

ColorBand? (For Huawei Knowledge Base only) ...... 4

5 What is the Band made of? ...... 4

6 Getting started ...... 5

7 Why doesn't the Band come with a pin? What sort of pin should I use to power the Band on/off via the pinhole button? ...... 5

8 How do I wake up the screen? ...... 6

9 Why doesn't the screen turn on when I touch it? ...... 6

10 Why is the screen-on time so short? ...... 7

11 Why doesn't the Band respond properly when I swipe the screen? ...... 7

12 How can I move between screens? ...... 7

13 How can I change the watch face? ...... 8

14 Can I use the Band when it isn't paired with my phone? ...... 8

15 Can I pair my Band with more than one phone? ...... 9

16 Why can't I establish a connection? ...... 10

17 How can I find my Band's Bluetooth name? ...... 11

18 Can I connect my phone to other Bluetooth devices after pairing it with my

Band? 12

19 How can I charge my Band? ...... 12

20 What charging currents does my Band support? ...... 12

21 How long does it take to charge the Band? ...... 12

22 How can I check the battery status? ...... 13

23 Why won't my Band charge properly? ...... 14

24 Will my Band display low battery alerts? ...... 14

2015-12-2 Huawei Confidential Page 2of 35

HUAWEI Band FAQs INTERNAL

25 Why does the battery drain so quickly? How can I improve the battery life? .. 15

26 Does the Band support incoming call alerts? ...... 15

27 When I receive an incoming call, why does the Band sometimes display a number rather than a name? ...... 15

28 How can I decline an incoming call? ...... 16

29 How do I use the smart alarm? ...... 17

30 Why does my alarm go off too early or too late? ...... 17

31 How do I use event reminders? ...... 17

32 How do I use the activity reminder feature? ...... 18

33 Will activity reminders work if my phone is powered off? ...... 18

34 Can I receive SMS/email notifications on my Band? ...... 18

35 When I receive a notification, the Band vibrates but the screen does not turn on.

Why? 19

36 My Band does not display message notifications. What can I do? ...... 19

37 Message notifications are intermittent. Why? ...... 20

38 How do I use smartcare notifications? ...... 20

39 How does the Band record exercise and sleep data? ...... 20

40 Why is sleep data inaccurate? ...... 21

41 How can I view monthly activity or sleep data? ...... 21

42 How do I track an activity using my Band? ...... 22

43 The step count on the Band differs from the step count on my phone. Why? .. 23

44 Why is the calorie count on my Band inaccurate? (For Huawei Knowledge

Base only) ...... 23

45 Why is the distance count on my Band inaccurate? (For Huawei Knowledge

Base only) ...... 24

46 How do I update the Band and Huawei Wear app? ...... 24

47 After connecting the phone to the Band, I am prompted to connect to UP. Can I log in using my Huawei ID? ...... 25

48 How can I avoid losing my personal data? ...... 25 2015-12-2 Huawei Confidential Page 3of 35

HUAWEI Band FAQs INTERNAL

49 The Band failed to sync with the Huawei Wear app. What can I do? ...... 26

50 The data in the Huawei Wear app and on the Band are different. Why? ...... 26

51 How do I restore the Band to factory settings? ...... 26

52 Why does the OTA update fail or take such a long time? ...... 27

53 The screen doesn't always turn on when I rotate my wrist. Why? ...... 27

54 Why doesn't the screen wake up when I rotate my wrist while lying down? .... 27

55 Why don't gestures work when I have just woken up? ...... 28

56 When I rotate my wrist, the screen-on time is too short. Why? ...... 28

57 Can I use the Huawei Wear app when my phone is in safe mode? ...... 28

58 How do I download the Huawei Wear app? What should I do if I can't download it? ...... 28

59 How waterproof/dustproof is my Band? ...... 29

60 How should I clean the Band's strap when it is dirty?...... 29

61 Is it possible to change the strap? ...... 29

62 How can I prevent the screen from being scratched or scuffed? ...... 30

63 What should I do if the screen is blank, has vertical or horizontal lines, or if the

Band freezes or fails to start up? (For Huawei Knowledge Base only) ...... 30

64 The Band's vibration intensity is weak. Why? (For Huawei Knowledge Base only) 30

65 When using an Android phone, why does my Band not display message notifications during the night? ...... 30

66 The Band's dial is round, but the display area is square. Why? ...... 31

2015-12-2 Huawei Confidential Page 4of 35

HUAWEI Band FAQs INTERNAL

1 Introduction to the Band

1. The Band sports a wide range of useful features. You can track your activity, set fitness goals, monitor sleep quality, and set smart alarms and event reminders. The Band also has an activity reminder feature that reminds you to get up after a period of inactivity. You can rotate your wrist to wake up the screen and navigate through menus. Activity and sleep data can be uploaded to the Huawei Wear app in real time. The Band also has an IP68 water-resistance rating. 2. The Band is available in three colors (Cream, black, and white).

There is a charging port and pinhole button on the back of the Band.

3. Basic product specifications Item Description

2015-12-2 Huawei Confidential Page 1of 35

HUAWEI Band FAQs INTERNAL

Item Description

Dimensions (H x W x  Long version: 244.4 mm × 38 mm × 9.5 mm D) (9.62 in. x 1.50 in. x 0.37 in.)  Short version: 229.4 mm × 38 mm × 9.5 mm (9.03 in. x 1.50 in. x 0.37 in.)

Weight Approx. 25 g

Battery capacity 70 mAh Bluetooth range 10 m (with no obstructions) Water and IP68 dust-resistance rating External ports Pogo pin USB port

4. Unsupported features (For Huawei Knowledge Base only)

Feature Description

Install third-party apps Not supported

Unlock phone Not supported

Heart rate monitor Not supported Control camera on Not supported phone Find phone Not supported Cycling Not yet supported Hiking Not supported Climbing stairs Not supported Bluetooth calls Not supported

Note: The Band is primarily designed to track your activity, monitor sleep quality, and display message notifications. We have concentrated on providing the best possible user experience for these features. For this reason, the above features are not yet supported. 2015-12-2 Huawei Confidential Page 2of 35

HUAWEI Band FAQs INTERNAL

2 How long is the battery life?

This depends on how the Band is used. The battery will last for approximately 3 days with normal use or 14 days in standby mode (i.e. when not worn and with notifications, incoming call alerts, and activity tracking disabled).

3 Which phone models are compatible with the Band?

Important: Please ensure that your phone is in the following list and meets the system version requirements. Function Activity tracking, sleep monitoring, sedentary reminders, smart alarm, event reminders, message viewing, incoming call notifications, incoming call rejecting, and time display Manufacturer

Huawei 6, honor 6plus, honor 7, honor 7i, honor 4c, honor X2 Honor

Huawei G7, G8, Mate 7, Mate S, , P7, P8, P8lite, P8max, Y550

Apple iPhone4s, iPhone5, iPhone5s, iPhone5c, iPhone6, iPhone6 plus, iPhone6s

Samsung Galaxy Note3, Galaxy Note4, Galaxy s5, Galaxy s6, Galaxy s6 Edge, Galaxy s6 Edge+, Galaxy Note5

Other , LG-G3, LG-G4, Sony Z3

Note: The above table includes all models that have passed compatibility tests. We are still in the process of testing other models and are continuing to add new models to the list.

2015-12-2 Huawei Confidential Page 3of 35

HUAWEI Band FAQs INTERNAL

*System version requirements:  Phone: Android 4.4.4 and later; iOS 7.0 and later  Huawei Wear app: Android 12.11.05 and later; iOS 12.10.3 and later

4 What is the difference between the Band, the TalkBand B1,

TalkBand B2, and ColorBand? (For Huawei Knowledge Base only)

The Band features a state-of-the-art 3-axis motion sensor which tracks your activity, monitors your sleep quality, and displays important notifications. It is a sporty, fashionable accessory that is the perfect complement to your phone and helps you to monitor your health. The Band sports an OLED touchscreen that supports swipe, hold and touch gestures. Bluetooth calling and Bluetooth music playback are not supported. The device has an IP68 dust and water-resistance rating.

The TalkBand B1 has a sporty design, while the TalkBand B2 has a more corporate aesthetic. The TalkBand B2 has a 6-axis motion sensor for more accurate activity recognition. It also comes in a premium gold version with a leather strap. The TalkBand B2 also has an OLED touchscreen that supports swipe, hold and touch gestures. It can be connected to two phones and used to find your phone and control your phone's camera. It has an IP57 dust and water-resistance rating.

The ColorBand tracks your activity and monitors your sleep quality. Users must switch between activity and sleep modes manually. The ColorBand does not display message notifications, but it can be used to find your phone and control your phone's camera. It has an IP57 dust and water-resistance rating.

5 What is the Band made of?

Please refer to the table below for information on the materials used to make the Band. Part Material Strap Made of dermatologically-tested TPU with an additional smooth coating for a comfortable wearing experience.

Stainless Made of strong, anti-corrosive 316L stainless steel for steel rim lasting shine and durability. Screen Made of strong transparent material with a hard, scratch-resistant coating. Rear housing Smooth, dermatologically-tested coating.

2015-12-2 Huawei Confidential Page 4of 35

HUAWEI Band FAQs INTERNAL

6 Getting started

Follow the steps below to start using your Band. 1. Download the Huawei Wear app from the Google Play store or Apple App Store. 2. Connect your Band to the charger. The Band will power on automatically and enter pairing mode.

Note: You can also power the Band on/off using the pinhole button on the back. When pressing the pinhole button, we recommend that you use a SIM eject pin or a ballpoint pen. Do not use needles or other sharp objects as these may damage the button. 3. Enable Bluetooth on your phone, search for your Band using the Huawei Wear app and then touch HUAWEI Band-XXX. 4. Touch √ on your Band to pair it with your phone.

7 Why doesn't the Band come with a pin? What sort of pin should I use

to power the Band on/off via the pinhole button?

1. The Band will power on automatically when you connect it to the charger. You do not need to power it off during use. 2. If you wish to forcibly power your Band on/off using the pinhole button, we 2015-12-2 Huawei Confidential Page 5of 35

HUAWEI Band FAQs INTERNAL

recommend that you use a SIM eject pin or a ballpoint pen. Do not use needles or other sharp objects as these may damage the button.

8 How do I wake up the screen?

You can wake up your Band's screen using any of the three methods below: 1. Knock the screen.

2. Rotate your wrist: (i) Wear the Band on your wrist and keep your wrist level. (ii) Quickly rotate your wrist by approximately 90 degrees while keeping your wrist level. The screen will turn on in less than 1 second. Practice rotating your wrist until you get the hang of turning on the screen.

3. Lift your wrist. When the Band is on your wrist and your arm is pointing downwards, you can lift your wrist to wake up the screen.

9 Why doesn't the screen turn on when I touch it?

The screen may not turn on straight away when the Band is placed on the charger or when it is too tight on your wrist. Try touching the screen again or wake up the screen by rotating or lifting your wrist.

2015-12-2 Huawei Confidential Page 6of 35

HUAWEI Band FAQs INTERNAL

10 Why is the screen-on time so short?

In order to prolong the battery life, the screen-on time is set to 3 seconds. This should be sufficient to view the time and activity data. If you want to keep the screen on, keep touching or swiping the screen.

11 Why doesn't the Band respond properly when I swipe the screen?

Ensure that you apply sufficient pressure to the screen and swipe slowly from one side or the middle of the screen to the other. Swipe gestures work better when you place a larger area of your finger on the screen.

12 How can I move between screens?

You can change the screen that is displayed using either of the following methods: 1. Swipe the screen. By default, the home screen displays the time. Swipe left or right to view your step count, calorie count, or sleep data.

2. Rotate your wrist: (i) Wear the Band on your wrist and keep your wrist level. (ii) Turn on the screen. (iii) Quickly rotate your wrist by approximately 90 degrees whilst keeping your wrist level to navigate to the next screen.

2015-12-2 Huawei Confidential Page 7of 35

HUAWEI Band FAQs INTERNAL

13 How can I change the watch face?

There are two ways to change the watch face: 1. Touch and hold the home screen until the Band vibrates. Swipe up or down to select the desired watch face and then confirm your selection by touching the screen.

2. Swipe the screen until is displayed, then touch the screen and select . Swipe up or down to select the desired watch face and then confirm your selection by touching the screen.

14 Can I use the Band when it isn't paired with my phone?

You must pair your Band with your phone when you use it for the first time in order to sync the time from your phone. Once the time has been synced, you can use the Band to view the time, track your activity, and monitor your sleep quality without pairing it with your phone. However, to receive incoming call alerts and message notifications on your Band, you must pair it with your phone via Bluetooth and ensure that the Huawei Wear app is running. We recommend that you add the Huawei Wear app to the list of protected apps to prevent your phone from killing the app in the background. On the Huawei P7, the list of protected apps can be accessed by going to Settings > Protected apps. Find the Huawei Wear app and turn on the corresponding switch.

2015-12-2 Huawei Confidential Page 8of 35

HUAWEI Band FAQs INTERNAL

15 Can I pair my Band with more than one phone?

You can only pair the Band with one phone. Once you have established a Bluetooth connection with your phone, you will not be able to find your Band in the list of Bluetooth devices on other phones. If you wish to pair your Band with another phone, first unpair the Band from your phone. 1. If you are using an Android device, open the Huawei Wear app, touch the Band icon in the top-left corner to access the settings, and then touch the UNPAIR button at the bottom of the screen.

2015-12-2 Huawei Confidential Page 9of 35

HUAWEI Band FAQs INTERNAL

2. If you are using an iPhone, simply disable Bluetooth on your phone to terminate the Bluetooth connection and then pair your Band with another phone.

Note: When you touch Forget This Device in your iPhone's Bluetooth settings, your phone may still attempt to re-establish the connection with your Band. If so, disable Bluetooth and then try pairing your other phone with the Band.

16 Why can't I establish a Bluetooth connection?

When you pair your Band with your phone, the two devices need to interact with each other. The Bluetooth connection will be lost if the devices go out of range (10 m with no obstructions) or if there is strong interference. The Bluetooth connection may become unstable when the distance between the devices approaches the maximum range. If you cannot pair your Band with your phone, try following the steps below: 1. Ensure that you have enabled Bluetooth on your phone. If Bluetooth is disabled, turn on the Bluetooth switch and place your phone next to the Band to try and establish a connection. 2. Make sure that you use the Huawei Wear app to establish the Bluetooth connection. Do not connect to the Band via your phone's Bluetooth interface. 3. Verify that you have selected the correct Band. Your Band will appear as HUAWEI Band-XXX on your phone. XXX represents the last three digits of your Band's MAC address. You can view the MAC address on the back of your Band. 4. If you are using an Android device, verify that the Huawei Wear app is running in the background. We recommend that you add the Huawei Wear app to the protected apps list. On the Huawei P7, the list of protected apps can be accessed by going to Settings > Protected apps. Find the Huawei Wear app and turn on the corresponding switch.

2015-12-2 Huawei Confidential Page 10of 35

HUAWEI Band FAQs INTERNAL

5. If the Bluetooth connection is lost, your phone will automatically attempt to re-establish the connection. If the connection is not re-established, open the Huawei Wear app and swipe down on the screen.

6. If you still can't establish the Bluetooth connection, close the Huawei Wear app in the background and open it again (or restart your phone). Then try to pair the devices.

17 How can I find my Band's Bluetooth name?

The Bluetooth name of your device is HUAWEI Band—XXX. XXX represents the last three digits of your Band's MAC address. You can find your Band's MAC address using either of the following methods:

1. Find your Band's MAC address on the back of your Band and note the last three digits. 2015-12-2 Huawei Confidential Page 11of 35

HUAWEI Band FAQs INTERNAL

2. Open the Huawei Wear app and touch the Band icon in the top-left to access the settings. You can find the MAC address underneath the Restore factory settings option.

18 Can I connect my phone to other Bluetooth devices after pairing it

with my Band?

You can only pair the Band with one phone. You may be able to pair your phone with more than one Bluetooth device, but this will depend on your phone's Bluetooth specifications.

19 How can I charge my Band?

Use the charger provided to charge your Band. Wipe the charging port dry before connecting your Band to the charger to prevent the charging contacts from corroding. Corrosion may cause your charger to short circuit or pose other risks.

20 What charging currents does my Band support?

The Band supports the following charging currents (with 5 V power supply): 0.5 A, 1 A, 1.5 A, 2 A. If the charging current exceeds the maximum supported current, the Band will automatically limit the current to prevent damage to the battery.

21 How long does it take to charge the Band?

A full charging cycle takes approximately 1.5 hours. The battery icon on the Band's screen indicates the current battery level. Once the charging process is complete, the battery icon will stop blinking and the screen will turn off after approximately 10 seconds.

2015-12-2 Huawei Confidential Page 12of 35

HUAWEI Band FAQs INTERNAL

22 How can I check the battery status?

You can check the battery status using either of the following methods: 1. The Huawei Wear app. When your phone is paired with your Band via Bluetooth, you can check the battery status from the settings screen in the Huawei Wear app (the battery level will be displayed as a percentage).

2. Your Band's home screen.  Wake up the screen to view the remaining battery level.

 If you are not using the default watch face, swipe right to view the battery status.

2015-12-2 Huawei Confidential Page 13of 35

HUAWEI Band FAQs INTERNAL

Note: The Band only displays the approximate battery level and does not display a percentage (apart from when it is charging). If you wish to view detailed battery information, use the Huawei Wear app.

23 Why won't my Band charge properly?

If your Band doesn't charge, check that the charging port is free of dirt. Salt residue from sweat or other dirt might be blocking the charging port. If this is the case, the metal terminal will not be able to conduct electricity and your Band will not charge. Wipe the dirt off the charging port using a cotton swab (or gauze) dipped in rubbing alcohol and then try to charge your Band again. If your Band still doesn't charge, press the pinhole button on the back of the Band for at least 10 seconds to forcibly restart the Band. Once you have done this, reconnect your Band to the charger to see if it will charge.

24 Will my Band display low battery alerts?

When the battery level is lower than 10%, a low battery icon ( ) will be displayed on the Band's screen and your Band will vibrate.

2015-12-2 Huawei Confidential Page 14of 35

HUAWEI Band FAQs INTERNAL

25 Why does the battery drain so quickly? How can I improve the

battery life?

The battery life will depend on how you use the Band. Follow the steps below to increase the battery life: 1. Turning on the screen and syncing data to the Huawei Wear app will significantly decrease battery life. Reduce the number of times that you turn on the screen or sync data. 2. Enabling message notifications will decrease the battery life. You can disable message notifications in the Huawei Wear app. 3. Pairing your Band with your phone via Bluetooth will significantly decrease the battery life. Terminate the Bluetooth connection when you do not need to connect your Band to your phone.

26 Does the Band support incoming call alerts?

Yes. Your Band will vibrate when you receive an incoming call.

27 When I receive an incoming call, why does the Band sometimes

display a number rather than a name?

Once you have paired your Band with your phone, your Band will be automatically granted permission to access your phone's contacts. When you receive an incoming call, the caller's name will be displayed on your Band if the caller is in your contact list. If not, the caller's number will be displayed. If the caller is in your contact list but the caller's name is not displayed, try following the steps below: If you are using an Android device, you may have accidentally disabled the Access contacts permission for the Huawei Wear app. Go to Permission manager and turn on the switch next to Trust this application or allow access to contacts.

2015-12-2 Huawei Confidential Page 15of 35

HUAWEI Band FAQs INTERNAL

If you are using an iPhone, disable Bluetooth in your phone's Bluetooth settings, then re-enable Bluetooth and re-establish the connection with your Band.

Alternatively, you can unpair your Band from your phone. Select — to restore factory settings and then open the Huawei Wear app to re-pair your Band with your phone.

28 How can I decline an incoming call?

You can use the Band to decline an incoming call when it is paired with your phone. When you receive an incoming call, follow the onscreen instructions to swipe to decline the call. Android device:

iOS device:

2015-12-2 Huawei Confidential Page 16of 35

HUAWEI Band FAQs INTERNAL

29 How do I use the smart alarm?

With the smart alarm, your Band wakes you up within a set period of time before your alarm when you are in a light state of sleep. If you are not in a light state of sleep, the alarm will not go off before the scheduled time. To configure the smart alarm, ensure that your Band is paired with your phone via Bluetooth, enter the alarm time in the Huawei Wear app and touch √ to confirm the settings and sync the alarm data to your Band. Note:

1. On Android, follow the in-app instructions. On iOS, return to the main app screen, then swipe down to sync the alarm settings to your Band. The alarm settings will not take effect until they have been synced. 2. If your Band is not paired with your phone when you configure the smart alarm settings, open the Huawei Wear app and sync the settings to your Band when the Bluetooth connection is re-established.

30 Why does my alarm go off too early or too late?

If you have set a smart alarm, your Band will vibrate earlier than scheduled if it detects that you are in a state of light sleep. To turn off the alarm, swipe up or touch X at the top of the screen.

When the alarm goes off, touch another area on the screen to activate the snooze function. The Band will let you sleep for another 10 minutes before vibrating again. Your Band will snooze automatically if you don't touch the screen. This can be done a maximum of three times.

31 How do I use event reminders?

1. Open the Huawei Wear app. Touch to open the Band settings screen and then select Alarm settings.

2015-12-2 Huawei Confidential Page 17of 35

HUAWEI Band FAQs INTERNAL

2. Touch the Add alarm button and then set the alarm time, repeats and event name. 3. Touch the √ symbol in the top-right corner. 4. Sync the alarm settings to the Band: On Android, follow the in-app instructions to sync data. On iOS, go to the main app screen and then swipe down to sync data.

The Band will remind you of an event at the designated time. You can configure up to five event reminders.

32 How do I use the activity reminder feature?

You can use the Huawei Wear app to configure the activity reminder interval, start time, end time and repeats. Your Band will check whether you have been active during the designated period. If you haven't been active, the Band will remind you to do some exercise.

33 Will activity reminders work if my phone is powered off?

Your phone is not needed once a reminder has been set but your Band must be powered on.

34 Can I receive SMS/email notifications on my Band?

Your Band currently supports SMS and email notifications. You can enable/disable these in the Huawei Wear app. The Band will vibrate when you receive a message. You can swipe up on the screen to view the message. Note: 1. Your Band can only display three screens worth of text. To view the next message, swipe up again. 2. If a message is too long, you will not be able to read it in full on your Band. Please use your phone to read the entire message. 3. Message notifications on your Band will vary depending on your phone's operating system. 2015-12-2 Huawei Confidential Page 18of 35

HUAWEI Band FAQs INTERNAL

35 When I receive a notification, the Band vibrates but the screen does

not turn on. Why?

To protect your privacy, the screen will not turn on when you receive message notifications. If the screen turns on too frequently, this could distract the user and shorten battery life.

36 My Band does not display message notifications. What can I do?

If message notifications are not displayed, please try the following: 1. Ensure that your phone and Band have a working Bluetooth connection and that they sync properly. 2. Open the Huawei Wear app and check that the message notification feature is enabled. 3. Ensure that switches are turned on for the notifications you want to receive. Android users can choose the notifications they want to receive in the Huawei Wear app. Note: If you are using EMUI 3.0, select Huawei Contacts to enable SMS notifications. iOS users should go to Settings > Push Messages and turn on switches for notifications they want to receive. Note: Currently only SMS and email notifications are supported. 4. Please ensure that message notifications are displayed in the status bar on your phone. 5. Android users should verify that the Huawei Wear app is running in the background. We recommend that you add Huawei Wear to the list of protected apps. On the Huawei P7, the list of protected apps can be accessed by going to Settings > Protected apps. Find the Huawei Wear app and turn on the corresponding switch.

2015-12-2 Huawei Confidential Page 19of 35

HUAWEI Band FAQs INTERNAL

37 Message notifications are intermittent. Why?

1. Please ensure that message notifications are displayed in the status bar on your phone. 2. Android users should verify that the Huawei Wear app is running in the background. We recommend that you add Huawei Wear to the list of protected apps. On the Huawei P7, the list of protected apps can be accessed by going to Settings > Protected apps. Find the Huawei Wear app and turn on the corresponding switch.

38 How do I use smartcare notifications?

The Band supports smartcare features. Huawei phones can automatically recognize flight, train, and hotel bookings or scheduled meetings and display relevant icons as reminders. Note: Smartcare is currently only supported on the Honor 7 and P8. Support for other models will be added soon.

39 How does the Band record exercise and sleep data?

The Band features a state-of-the-art 3-axis motion sensor which can monitor your sleep patterns and exercise (walking, running etc.). Motion sensors monitor the size, frequency and order of movements to determine whether the user is sleeping or exercising. 2015-12-2 Huawei Confidential Page 20of 35

HUAWEI Band FAQs INTERNAL

40 Why is sleep data inaccurate?

Sleep state is deduced from wrist movements made while the user is asleep. This data is captured with a capacitive sensor, using a pioneering multi-parametric approach.  Sleep readings are too low: If frequent wrist movements are detected, the Band may determine that the user is awake and discard sleep data. If the user takes a nap lasting less than 20 minutes, this might not be detected by the Band and sleep data will not be recorded.  Sleep readings are too high: Sensors may interpret that the user is asleep if wrist movements are infrequent and resemble those of a sleeping person. This can lead to data inaccuracies. For example, when you watch television or use a tablet, infrequent or limited wrist movement may cause the Band to determine that you are asleep. The development team is currently optimizing sleep sensor algorithms and will release improvements in future updates.

41 How can I view monthly activity or sleep data?

1. View data for an activity You can swipe up or down on the screen to view activity data while exercising.

Walking Running Calories

Note: The running icon is not displayed unless running activity is detected. You can also connect the Band to your phone and use the phone app to view activity data.

2015-12-2 Huawei Confidential Page 21of 35

HUAWEI Band FAQs INTERNAL

2. View monthly data. In the app, go to the fitness/sleep data screen and touch the monthly data icon at the bottom.

42 How do I track an activity using my Band?

Turn on the screen and swipe until you reach the activity screen . Touch and

2015-12-2 Huawei Confidential Page 22of 35

HUAWEI Band FAQs INTERNAL

hold the icon until the countdown ends. The Band will then begin recording data.

: Pause timer

: Resume timer

: View activity duration, data, and calories burned

43 The step count on the Band differs from the step count on my phone.

Why?

The Band uses a state-of-the-art 3-axis motion sensor which is sufficiently accurate for everyday usage. The following factors could give rise to step count discrepancies: 1. Unlike other step counters, wristbands can detect and discard invalid data, such as steps counted when users are at the office, moving their arms while static, brushing their teeth or eating. Products which cannot detect and discard false counts will give an artificially high step count. 2. When not exercising, we sometimes still move our arms or body. If this is done regularly for some time, the motion sensor may incorrectly interpret this as walking activity and increase the step count. Note for hotline staff: If a user reports regular data inaccuracies, please send relevant information to the development team. You should include usage information, benchmark details, phone model number, app version, and Band version.

44 Why is the calorie count on my Band inaccurate? (For Huawei

Knowledge Base only)

The calorie count is calculated using the user's height, gender, weight, age, and activity data from the motion sensor. In order to avoid inaccurate calorie counts, users should input their personal metrics (gender, height, weight and age) when they first use their Band. Running on a treadmill is different to real running, where a runner's stride can vary. This can lead to inaccurate distance readings and discrepancies in the calorie count.

2015-12-2 Huawei Confidential Page 23of 35

HUAWEI Band FAQs INTERNAL

45 Why is the distance count on my Band inaccurate? (For Huawei

Knowledge Base only)

The distance is calculated using the user's height, gender, weight, age, and activity data from the motion sensor. In order to prevent inaccurate distance readings, users should input their personal metrics (gender, height, weight and age) when they first use their Band. The Band does not have a GPS and calculates distance traveled using an algorithm. This can lead to small data inaccuracies. It is recommended that you use the Huawei Wear app on your phone to record more accurate and detailed activity data.

46 How do I update the Band and Huawei Wear app?

Before updating, please ensure that your Band and phone have a working Bluetooth connection. Updating your Band: in the Huawei Wear app, touch the settings icon in the top-left corner, and then touch Update HUAWEI Band. The Band will check for the latest software version and perform an update.

Update Huawei Wear: In the Huawei Wear app, touch the little person icon in the top-right corner and then select About > App update. When the screen displays Updating..., your phone will check for and apply any updates.

2015-12-2 Huawei Confidential Page 24of 35

HUAWEI Band FAQs INTERNAL

Note: The Band will disconnect from Bluetooth during the update. Please wait patiently until the update is complete.

47 After connecting the phone to the Band, I am prompted to connect to

UP. Can I log in using my Huawei ID?

When you connect to UP, Band data is uploaded to the servers of our partner, Jawbone UP. Jawbone can perform data analysis on sleep, walking, and running data that is uploaded. You must download the Jawbone app to use this feature. You cannot use your Huawei ID with UP. It is necessary to register for a separate UP account. UP offers support for multiple wristband devices, allowing you to keep all of your data in one place.

48 How can I avoid losing my personal data?

Your Band can store seven days' worth of data. It is recommended that users sync their Band to the cloud on a daily basis. When you perform a sync, data is backed up to the cloud. Before syncing data, please ensure that: (i) you have the latest version of the Huawei Wear app; (ii) there is a working Bluetooth connection between your Band and phone; (iii) both your Band and phone have sufficient charge. Follow the steps below to sync your data:

1. Open the Huawei Wear app and touch to enter the Band settings menu. Touch Log in then choose any login method. 2. Once you have logged in, go to the Huawei Wear screen and swipe down to sync data.

3. You can sync data in the cloud to other phones by logging in with the same Huawei ID.

2015-12-2 Huawei Confidential Page 25of 35

HUAWEI Band FAQs INTERNAL

Note: If you change your Huawei ID while using your Band, your data will be stored across two separate accounts. This could lead to data inconsistencies. Your Band will power off automatically when battery is low. If the Band is then left uncharged for a long period, your data may be lost. Please ensure you charge your Band when battery is low.

49 The Band failed to sync with the Huawei Wear app. What can I do?

If the sync failed, please try the following: 1. Ensure that your Band and phone have a working Bluetooth connection and that your phone has the latest version of the Huawei Wear app. 2. Disconnect then reconnect your Band and phone using Bluetooth and then try to sync again. Note: Android users should select the UNPAIR button at the bottom of the settings screen in the Huawei Wear app. iOS users should turn off Bluetooth on their phone to disconnect from the Band. 3. If you still cannot sync data, please close the Huawei Wear app and any background process. Once you have done this, re-open the app and try to sync again.

50 The data in the Huawei Wear app and on the Band are different.

Why?

1. There is more data in the app: If you use the same Huawei ID to sync data to the cloud from different wristbands, data will be aggregated, regardless of which phone you sync it from. 2. There is more data on the Band, or data is missing: If you sync data from your Band using different Huawei IDs, there will be more data on the Band than in the app.

51 How do I restore the Band to factory settings?

There are two ways to restore factory settings:

1. Restore using the Band. (1). Swipe the screen until you see the icon and select

it. (2). Swipe the screen until you find the restore icon and select it. 3. Select the √ icon to complete the factory restore. 2. Restore using the Huawei Wear app. First, ensure you have a working Bluetooth connection between your Band and phone. Open the Huawei Wear app and touch

to enter the Band settings menu. Touch Restore factory settings to restore your Band to factory settings. 2015-12-2 Huawei Confidential Page 26of 35

HUAWEI Band FAQs INTERNAL

Note: If you restore your Band to factory settings, all activity, sleep and time data will be deleted. You will also need to re-pair the Band with your phone.

52 Why does the OTA update fail or take such a long time?

1. Before updating your Band, please ensure you have at least 30% battery. 2. Update times can vary depending on network performance. Please ensure you have a reliable 3G/ or Wi-Fi connection. 3. OTA updates require a reliable Bluetooth connection between your phone and Band. Usually updates take less than 10 minutes. If updates take longer than this, please be patient and do not attempt to use the Huawei Wear app or your Band in the meantime. 4. If the Huawei Wear app or Band notifies you that the update failed, please reboot your Band and then try again. Keep trying until the update is successful.

53 The screen doesn't always turn on when I rotate my wrist. Why?

The Band's responsiveness can vary from person to person. If the Band does not respond after you rotate your wrist, try the following: 1. Hold your wrist horizontal while wearing the band. 2. Quickly rotate your wrist by approximately 90 degrees whilst holding your arm level. The screen should turn on in less than 1 second. Practice rotating your wrist until you can make the screen turn on every time.

54 Why doesn't the screen wake up when I rotate my wrist while lying

down?

The screen must face upwards before being rotated in order to wake up the screen. When lying down, it may be easier to wake up your Band by touching the screen.

2015-12-2 Huawei Confidential Page 27of 35

HUAWEI Band FAQs INTERNAL

55 Why don't gestures work when I have just woken up?

The wrist-rotate gesture is suspended while you are asleep to avoid disrupting your sleep. When you have just woken up, the Band is still in sleep mode and gestures are disabled. To leave sleep mode, you can swipe the screen three times or get up and move around. You should then be able to use the wrist-rotate gesture again.

56 When I rotate my wrist, the screen-on time is too short. Why?

In order to improve battery performance, the wrist-rotate gesture only turns on the screen briefly. There should be enough time to view the time and date.

57 Can I use the Huawei Wear app when my phone is in safe mode?

The Huawei Wear app doesn't work when your phone is in safe mode or low power mode.

On some phones, the Huawei Wear app may be killed when the screen turns off. This may prevent some functions from working. We recommend that you add the Huawei Wear app to your phone's protected app list. On the Huawei P7, the list of protected apps can be accessed by going to Settings > Protected apps. Find the Huawei Wear app and turn on the corresponding switch.

58 How do I download the Huawei Wear app? What should I do if I

can't download it?

Please scan the QR code below or search for and download Huawei Wear from Google Play or the App Store.

2015-12-2 Huawei Confidential Page 28of 35

HUAWEI Band FAQs INTERNAL

If you are unable to download the app, try using a different phone. When registering a Huawei ID, if you do not receive a verification SMS, it could be because it has been intercepted by your phone, or due to a server error. It is recommended that you log in with a different Huawei ID, or try to register again later. Note: On Android, if your phone displays the message indicating that the app cannot be installed due to unknown sources, go to Settings > Security > Unknown sources and enable unknown sources.

59 How waterproof/dustproof is my Band?

The Band has an IP68 dust and water resistance rating and is suitable for everyday use. You can wear your Band while washing your hands, having a cold shower or washing your car. Please do not wear the Band while diving or scuba diving. You should not wear your Band while swimming as there is a risk it could be damaged. The Band cannot currently monitor swimming activity. Note: To avoid corrosion, please do not let your Band come into contact with seawater.

60 How should I clean the Band's strap when it is dirty?

If the strap is dirty, please clean it with a damp tissue or wet cloth. Please note the following precautions: 1. Do not use any strong chemicals, detergents or cleaning equipment as these may corrode or damage the Band's strap or screen. 2. Before cleaning, please disconnect the Band from the charger. 3. The Band has an IP68 dust and water resistance rating and is suitable for everyday use, but is still vulnerable to moisture. To avoid condensation damage, please wipe your Band with a dry cloth or tissue and air sufficiently after cleaning it.

61 Is it possible to change the strap?

The strap cannot be changed. If your strap is damaged, please take the Band to a service center for repair. 2015-12-2 Huawei Confidential Page 29of 35

HUAWEI Band FAQs INTERNAL

Note: If the user asks, please inform them that they must pay for such repairs.

62 How can I prevent the screen from being scratched or scuffed?

The Bands have all passed rigorous anti-scratch and anti-abrasion tests and are fitted with a screen protector by default. Please do not place your band in close contact with metal objects such as keys that might scratch the screen.

63 What should I do if the screen is blank, has vertical or horizontal

lines, or if the Band freezes or fails to start up? (For Huawei

Knowledge Base only)

1. Check that the charger is functioning properly. 2. Connect to charger and charge for 1.5 hours. 3. Use a SIM eject pin or ballpoint pen to press down the pinhole reset button (hold down for 10s and then release). Do not use needles or other sharp objects as these may damage the button. 4. Ensure you have the latest version of firmware. Note for hotline staff: If the Band still does not function after trying the above, please take your band to ASC for repair.

64 The Band's vibration intensity is weak. Why? (For Huawei

Knowledge Base only)

Vibration intensity is a subjective measure. We welcome feedback from users and will release improvements where necessary in later updates.

65 When using an Android phone, why does my Band not display

message notifications during the night?

Open the Huawei Wear app and select Settings > Push Messages. The default notification period is from 8:00 to 22:00. This means that you will not receive message notifications after 22:00. You can change these times if needed.

2015-12-2 Huawei Confidential Page 30of 35

HUAWEI Band FAQs INTERNAL

66 The Band's dial is round, but the display area is square. Why?

1. Square screens allow text to be displayed properly and offer a better reading experience. 2. Because the display area is smaller than the dial, the battery should last for longer. 3. This design approach does not affect the Band's appearance or display performance.

2015-12-2 Huawei Confidential Page 31of 35