Industrial Trainning Institutes, Hoshangabad T C R PACKAGE NAME MECHANICAL HAND TOOLS PACKAGE NO CENTER DRILL CHASER TAPE DIE

Public Disclosure Authorized Disclosure Authorized Public Public PACKAGE NO SPANNER SCREW DRIVER PACKAGE NO SCRAPPER PACKAGE NO GRINDER WHEEL DRESSER PACKAGE NO TONG TRAMMER

PACKAGE NAME MECHANICAL HAND DEVICES PACKAGE NO ANGLE PLATE VICE SURFACE GAUGE PACKAGE NO SHAPER PACKAGE NO SWAGE BLOCK SOLDERING IRON PACKAGE NO V BLOCK BORING TOOL PACKAGE NO BRAKE DRUM CARBURETTOR

Public Disclosure Authorized Disclosure Authorized Public Public PACKAGE NO EQUIPMENT ACCESSORIES PACKAGE NO HAND DRILL M C SOLDERING IRON PACKAGE NO MARKEING TABLES TIMMONS PACKAGE NO SLEEVES PACKAGE NO OIL CAN PACKAGE NAME MEASURING TOOLS MECHANICAL PACKAGE NO RULE SPIRIT LEVEL CALIPER DIVIDER PACKAGE NO GAUGES PACKAGE NO PACKAGE NO METERS Public Disclosure Authorized Disclosure Authorized Public Public PACKAGE NO MILLING CUTTERS

PACKAGE NO SAFETY DEVICES PACKAGE NAME MACHINES TO BE PROCURE FROM DIRECTORATE PACKAGE NO CNC MACHINES PACKAGE NO LATHE MACHINES PACKAGE NO MILLING MACHINE Public Disclosure Authorized Disclosure Authorized Public Public PACKAGE NO SHAPPING MACHINE AND SLOTTER PACKAGE NO WELDING MACHINES PACKAGE NO DRILL MACHINE AND GRINDER PACKAGE NO COMPRESSOR JACK HOIST PUMP PACKAGE NO VEHICAL CAR W D PACKAGE NO MOTOR LORRY JEEP PACKAGE NO TRACTOR PACKAGE NO MOTOR MECHANIC EQUIPMENT PACKAGE NO PETROL ENGINE PACKAGE NO FURNITURE GRAND TOTAL

PACKAGE NAME - MACHINES (TO BE PROCURE FROM DIRECTORATE)

Turner Fitter Machi Welder Trac.Mech Moter nist Mech I Q A Sl No Items T C V P

PACKAGE NO CNC MACHINES CNC Trainer Lathe with all access. 1 1300000 1300000 D C.N.C.Milling Trainer with all access. 1 1500000 1500000 D C.N.C. Drilling Trainer with all access. 1 800000 800000 D T 3600000 PACKAGE NO. 23 - LATHE MACHINES Lath all geared hade stock S.S. and S,C. height of centre over bed 15 cm, gap head complete with accessories e.g. pump, all fitting and splash guard driving plate with drives, face plate 3 1 250000 250000 D Jaw and 4 Jaw chucks fixed and travelling steady compound turret tool post, taper turning attachment, fixed and running centres, driving dogs straight and bent tails. Lathe general purposes all gearedheight of centres 150mm to below between centres 150mm supplied 3 300000 900000 with 3 jaw & 4 jaw chuck, face plate, taper turning attachment steadies etc. and set of lathe tool. Lathe tool room s.s & s.c (all geared type) 15 cm centre hight 120 cm between center Machine to be motorised and supplied with coolant installation, 1- jaw indipendent chauck 250 mm , 3 jaw self centering chauk 150 1 250000 250000 mm, fixed steady, travelling steady face plate, driving plate,1 way tools post draw in type collents set up to 25 mm ,0.5 mm relieving attachments. D Capstan Lathe 250mm sawing, 25mm spindle bore with all accessories and 1 270000 270000 attachements including collet chuck and set T 1670000 PACKAGE NO. 24 - MILLING MACHINE Milling machine plain type horizontal 1 400000 400000 (Motorised) No.2 with all attachment D Universal Horizontal Milling M/c 1 550000 550000 D Milling machine vertical No.1 1 400000 400000 (Motorised) with all attachments D Surface Grinder 1 400000 400000 D T 1750000 PACKAGE NO. 25 - SHAPPING MACHINE AND SLOTTER Shapping M/c 450mm stroke (Motorised with all attachement) 2 D Shapping M/c 305mm stroke (Hydraulic) with all attachement 1 D Slotter 180mm stroke (Motorised)with all attachments 1 150000 150000 D T 1350000 PACKAGE NO. 26 - WELDING MACHINES TIG Welding set Complete 300 1 200000 200000 ampr.AC/x D Single Phase welding Transformer - 50A to 150A (Air Cooled) 2 20000 40000 Transformer welding continyous welding current with Accessories 300A, 400A 1 100000 100000 D Welding Generator DC rotary set 200 - 300 1 200000 200000 1 amps with all accessories CO2 Welding Machine complete 400 amps 1 200000 200000 1 (1 set) Power hacksaw 1 80000 80000 1 Braze weld equipment Erazer which can be 1 50000 50000 1 used with exiting welding transformer T 870000 PACKAGE NO. 27 - DRILL MACHINE AND GRINDER AG-7 Grinder 1 Drilling machine bench 1 HP to drill up to 12.5 mm dia 3 10000 30000 Drilling machine bench sansitive 0-12 mm cap motorised with chuck and key 2 7000 14000 D Drilling machine pillar 20mm capacity 1 15000 15000 Cylindrical grinder 1 400000 400000 D D.E. Grinder 30cm wheel Motorised pedestel Type 1 5000 5000 Radial drill M/c 1200mm area motorised with tapping attachments 1 500000 500000 D Tool & cutter grinder 250mm to admit 450mm between centre-fully motorised work head supplied with tool rest of different types table clamps and other attachments 1 400000 400000 D Grinder with two 18 cm wheels with twist 1 0 1 drill grinding attachment. Power Machine 1 80000 80000 D T 1451500 PACKAGE NO. 28 - COMPRESSOR,JACK,HOIST, PUMP Compressor capacity 12 c ft. piston type with pressore guage , Spray gun etc. 1 15000 15000

Air compressor- 2 stage- 500 litre with 5 hp 1 18000 18000 1 motor and air receiver Hydraulic hoist 1 20000 20000 Hydrolic jack HI - LIET ( trolley type ) 3 20000 60000 D A Lifting jack screw type 3050 kg. 4 10000 40000 4 D A Arbor press hand operated ½ ton 2 10000 20000 2 D A Chain pulley block –3 ton capacity 2 15000 30000 2 D A Fuel pump. 1 15000 15000 1 D A Water pump & oil pump.(1 each) 1 15000 15000 1 D T 233000

PACKAGE NO. 29 - VEHICAL (CAR) - 4 Wheel Drive I Turner Fitter Machi Welder Trac.Mech Moter Q A nist Mech Sl No Items T C V P

Motor car in runing condition ( indian make ) 1 600000 600000

T PACKAGE NO. 30 - MOTOR LORRY, JEEP

I Turner Fitter Machi Welder Trac.Mech Moter Q A nist Mech Sl No Items T C V P

Motor lorry in runing condition ( disel ) ( indian make ) 1 700000 700000 Motor vehicle in running condition (diesel 1 450000 450000 1 heavy) T

PACKAGE NO. 31 - TRACTOR I Turner Fitter Machi Welder Trac.Mech Moter Q A nist Mech Sl No Items T C V P

Wheel type tractor fitted with diesel engine with standered accessories and special tool ( 25 ,35 , 45 ) draw bar HP of different make 1 400000 400000 Grawler type tractor fitted with diesel with diesel engine with standard accessories and 1 400000 400000 1 special tools ( 50 to 60 draw-bar H.P ). Trailing type three bottom mould board 30 1 25000 25000 1 cm. Size with coulter and jointer. Rear axle assembly T-gear box steering box assembly of the diesel engine tractor.(1set 1 150000 150000 1 each) T 975000

PACKAGE NO. 32 - MOTOR MECHANIC EQUIPMENT I Turner Fitter Machi Welder Trac.Mech Moter Q A nist Mech Sl No Items T C V P

Wheel balancing unit 1 300000 Wheel allignment machine 1 150000 T PACKAGE NO PETROL ENGINE Petrol engine ( 2 stroke ) motor cycle / scooter 1 15000 15000 D Petrol engine (running condition,car type) 1 150000 150000 1 T

PACKAGE NO. 34 - FURNITURE I Turner Fitter Machi Welder Trac.Mech Moter Q nist Mech A Sl No Items T C V P

Racks Steel - 6 shelves Hight 6’ x 3’ width x 18 4000 72000 4 4 4 2 2 2 15" depth

T

PACKAGE NO. 20 - MILLING

I Turner Fitter Machin Welder Trac.Mech Moter Q ist Mech A Sl No Items T C V P

Cylindrical cutter 63×90x27m.m.bore dia ( Addison Make) 4 4 Cylindrical cutter 80×90x27m.m. bore dia ( Addison make) 3 3 D P involute gear cutter set of 8 no 16",10",8"DP HSS bore dia(Addision make) 2 2 Doub;e angle unequal cutter 80×32×70º x27mm bore dia (Addision make) 4 4 Double angle unequal cutter 100×36×75ºx27mm bore dia(Addision make) 4 4 Double angle unequal cutter 50×12×55ºx27 mmbore dia(Addision make) 4 4 Double angle unequal cutter 63×18×60ºx27mm bore dia(Addision make) 4 4 Dove tail cutter HSS 60º,45º 8 8 Drill flutting cutter HSS different size bore dia 27 mm(Addision make) 4 4 cutter 8,10,12,14,16 m.m. 4 4 Equal angle cutter 45º 100 x27mm bore dia(Addision make) 2 2 Equal angle cutter 60º 100x27mm bore dia (Addision make) 1 1 Shell & mill cutter H.S.S. 75x50x27 mm bore dia(Addision make) 12 12 Side and face cutter 100×10x27 bore dia(Addision make) 4 4 Side and face cutter 100×12x27mm bore dia(Addision make) 4 4 Side and face cutter 160×10x27mm bore dia(Addision make) 5 5 Side and face cutter 200×20x27 bore dia(Addision make) 6 6 Side and face cutter 80×8x27m.m bore dia(Addision make) 4 4 Side and face cutter 160×16x27mm bore dia(Addision make) 2 2 Single angle cutter 63×18×45º LHx27 mm bore dia(Addision make) 2 2 Single angle cutter 63×18×45º RHx27mm bore dia(Addision make) 1 1 Single angle cutter 63×18×60º LHx27 mm bore dia(Addition make) 2 2 Single angle cutter 63×18×60º RHx27 mm bore dia (Addision make) 1 1 Slitting saw cutter HSS 100x6x27 mm bore dia (Additsion make) 4 4 T slot cutter HSS different size 8 8 Equal angle cutter 90º 100 x27mm bore dia(Addision make) 2 2 T

Industrial Trainning Institutes, Hoshangabad

PACKAGE NAME - MECHANICAL HAND TOOLS T Q A Sl No Items T C Required Qty. Trade wise R V

Turner Fitter Machi Welder Trac.Mech Moter nist Mech PACKAGE NO. 1- CENTER DRILL,CHASER,REAMER, TAPE&DIE

P Center drill A1 to 5 (set) 4 2500 10000 4 P Centre 10 cm. 40 150 6000 24 16 P Centre punch 9 mm x 127 mm 23 150 3450 23 N O Chaser ,hand W/W 9 to 40 T.P.I set of 11 1 2500 2500 1 P internal.(1 set) N O Chaser hand W/V 9 to 40 T.P.I. set of 11 1 2500 2500 1 P external.(1 set) Collapsible Tap with attachment (4 nos. 2 1500 3000 2 N O P each) P Combination Drill A-2.5 and A-1 28 800 22400 28 P Coventry Type Die Head (Self opening ) 2 2000 4000 2 P Die Handle 4 1500 6000 4 P Drill chuck 0.20 with taper shank 2 2500 5000 2 P Drill Drift 2 150 300 2 P Drill HSS taper shank 8,10,12,16,20,22,25 (set) 4 8000 32000 4 P Drill twist S.S .1/8” to ½”x 1/64 “ set. 2 1000 2000 2 P Drill twist S/S 1.5to 12mm by 0.5 mm 5 1000 5000 3 2 P Drill twist T/S mm to 25 mm x 1.5. 2 1200 2400 2 P Drill, copper 10 x 15 1/2 mm. 2 2000 4000 2 P Extractor stud EZY-out 4 2000 8000 4 H.S.S. hand reamer adjustable 11to 12, 12 to 1 5000 5000 1 P 13, 13 to 15, 15 to 16mm. (1set) H.S.S. hand , parallel 8 to 12 by 1.5 2 5000 10000 2 P mm. H.S.S. machine reamers 3 to 19 mm in steps 1 5000 5000 1 P of 1.5 mm. H.S.S.hand reamer 3.5 to 12.5 mm in steps 1 5000 5000 1 P of 1.5 mm set of 12. P Hand Chaser M- 12 & M - 16 (External) 4 600 2400 4 P Hand Chaser M- 12 & M - 16(Internal) 4 600 2400 4 Hand Reamer adjustable cover max 9,12,18 1 4000 4000 1 P mm set of 3. Hand Reamer taper 4-9 mm set of 6 OR 4- 1 3000 3000 1 P 7mm set of 4. Hand reamer, adjustable 10.5 to 11.25 mm, 11.25 to 12.75 mm, 12.75 mm to 14.25 mm 2 4000 8000 2 P & 14.25mm to 15.75 mm Number drills H.S.S.(parallel shank) 3-14mm 8 4000 32000 8 P by 0.5 (set) P Number punch 6 mm and letter punch 6 mm (each)1 1000 1000 1 P Prick punch 15 cm. 8 200 1600 4 4 P Punch center 10 cm . 52 100 5200 28 24 P Punch figure set 3 mm 2 800 1600 2 P Punch hollow 6.7 and 9 mm set. 2 800 1600 2 P Punch hollow 6mm to 19 set of 5. 4 750 3000 4 P Punch letter set 3 cm.(1 set) 1 800 800 1 P Punch letters set 3 mm.(1set) 1 500 500 1 P Punch letters set 3mm 2 800 1600 2 P Punch round 3mm x 4mm set of 2 4 150 600 4 P Punch, hollow, 6, 7, 8, 9, 10.5 & 12mm set 2 750 1500 2 P Reamer 6mm to 25mm by 1mm 2 12000 24000 2 P Reamer adjustable 10mm to 15mm by 7.5mm 2 2200 4400 2 Reamer machine straight flute 6 to 25 mm 2 8000 16000 2 P (set) P Reamer parallel 12 -16 mm of 5. 2 4000 8000 2 P Reaner Adjustable 10 to 20 mm (set) 1 5000 5000 1 P Tap & Die B.A. No. 0 to 10 in a box 2 5000 10000 2 P Tap & Die B.S.F. up to 1 inch (set) 2 5000 10000 2 P Tap & Die B.S.W. up to 1 inch (set) 1 5000 5000 1 P Tap & Die metric set up to 25 mm (set) 1 3000 3000 1 P Tap (adjustable) 4 1500 6000 4 Taper shank twist drill set 6.30mmx1.5mm 2 800 1600 2 P to suit radial drilling machine P Taps and dies complete set box B.A 1 8000 8000 1 Taps and dies complete set in box 3-18 mm 2 6000 12000 1 1 P set of 10 (each) Taps and dies complete set in box B.A. , B.S.W. B.S.F. American and metric (1 set 1 8000 8000 1 P each) Taps and dies complete sets in box metric 4 2500 10000 4 P with handle Twist Drill straight shank 1 to 12 mm by 1 2 1500 3000 2 P mm Twist Drill taper shank 10-12 mm by 0.5 2 500 1000 2 P mm (Set) Twist drills for ratchet brace 6 to 20 by 1.5 1 1200 1200 1 P cm. P Drill Chuck 12 mm cap with key 2 1500 3000 2 P Drill post. 1 1500 1500 1 TOTAL 355050 PACKAGE NO. 2 - SPANNER, HACKSAW, SCREW DRIVER P Box spanner set 6-25 mm set of 8 with Tommy bar. 1 2000 2000 1 2 Nos Ordered Before for MM P Carburettor repair tool kit 2 2500 5000 2 P Card 4 75 300 4 P cold cross 9 mm 16 1600 P Cold set rodded 25x200mm.. 4 800 3200 4 P Engineers screw driver 20cm 23 150 3450 23 P Hacksaw fixed 200 mm(Pistiol grip) 10 750 Hacksaw frame adjustable 250-300 mm with P blades 15 1125 P Hacksaw frame for 30 cm blade 31 50 1550 P Hot set rodded 25x200mm 2 800 1600 2 P Impact screw driver 2 100 200 2 lnterchangeable ratchet set with a 12 mm deiver sized 10-32 set of 18 socker & attachments. 2 3000 6000 2 P P Magnet spanner set 1 250 250 1 P Magneto spanner set of 8 spanner 2 1200 2400 2 P Mallet (wooden) 8 400 Philips screw driver type sets of 5 pieces100- P 300 mm 8 750 6000 8 P Pipe wrench 25 cm and 35 cm (1 each) 1 350 350 1 P Plier combination 15 cm 56 8400 P flat nose 150 mm 4 1000 Pliers nose ( round and straight) 150 mm and P 200 mm 4 600 P Screw Driver 25 cm blade and 20 cm blade (each) 1 300 300 1 P Screw driver 30 X 1 cm 16 250 4000 16 P Setting hammer 8 800 P Spanner, clyburn 15cm 2 200 400 2 Spanner, flax for screwing up and P unscrewing in inaccessible position (Set) 1 250 250 1 P Spanner, for sparking plug 10 mm & 14 mm. 4 100 400 4 P Spanners , adjutable 20 cm 2 650 1300 2 P Spindle blade screw driver 100mm 8 150 1200 8 P Square blade 15 cm 24 150 3600 24 TOTAL 58425 PACKAGE NO. 3 - HAMMER, SCRAPPER, P Hammer ball pein 1 kg. with handle 4 1100 P Hammer copper 1 Kg with handle 2 1600 P Hammer planishing 6 1050 P Hammer scaling 0.25 kg with handle 3 150 450 3 P Needle file set 2 1000 2000 2 P Pipe cutter (cap. 50 mm dia) 2 800 1600 2 P Scraper 3 corner 15 cm 12 150 1800 12 P Scraper flat 15 cm. 12 140 1680 12 P Scraper half round 15cm 12 150 1800 12 P Scrapper flat 25 cm 2 150 300 2 P Scrapper triangular 25 cm 2 150 300 2 P Scrapper, bearing 4 450 1800 4 P Scriber 150mm x 3mm 24 150 3600 24 P Scriber 15 cm 28 150 4200 24 4 P Straight Scriber 15 cm. 2 100 200 2 TOTAL 23480 PACKAGE NO. 4 - GRINDER, WHEEL DRESSER, OIL STONE Carbide tipped tools of different sizes and 2 3000 6000 2 P shapes (throw away tips) (Sets) P Grinding wheel dresser (diamond) 1 1500 1500 1 P Grinding wheel dresser hunting time type 4 1500 6000 4 P Oil Stone 12 mm sq. x 100 long fine 12 250 3000 12 P Oil stone 150x50x25mm 10 250 2500 8 2 Stone, carborandom 15x 5x3.75 cm rough 7 200 1400 2 1 4 P and smooth P assorted sizes on holder 6 800 4800 6 P Tool Bits 12 X 150 mm sq. assorted shaped 24 450 10800 24 Tool Cemented carbide assorted sheped 4 4000 16000 4 P (External )for steel turning - set of 12 nos . P Tool Maker’s buttion 2 1500 3000 2 P Tools bits HSS 10mm square (dozen) 2 4800 9600 2 P Tools bits HSS 6mm square (dozen) 2 3600 7200 2 P Wheel Dresser Diamond (inserted- 0.75 or 1 Carat)4 1000 4000 4 Wheel Dresser Huntingon- type with star 1 1000 1000 1 P cutter (1 set) P Parting Tool Holder with H.S.S. blade 12 400 4800 12 TOTAL 81600 PACKAGE NO. 5 - GAUGE, TONG,TRAMMER P Cylinder dial gauge 1 2500 2500 1 P Shovel 5 400 2000 4 1 P Spark lighter 20 200 4000 20 P Stake grooving 6 1500 9000 4 2 P Stake hatchet 6 1500 9000 4 2 P Tip cleaner 16 250 4000 16 P Tong flat 350mm.. 4 250 1000 4 P holding 30 cm 24 200 4800 24 P Tongs roving 350 mm. 4 250 1000 4 P Trammer 30cm. 3 250 750 2 1 Valve seat cutting tools complete with 1 7000 7000 1 P guides and pilot bar(all angles) in a box P Wire brush 15 cm x 3.7 cm 26 75 1950 26 TOTAL PACKAGE NAME - MECHANICAL HAND DEVICES T Q A Sl No Items T C Required Qty. Trade wise R V

Turner Fitter Machi Welder Trac.Mech Moter nist Mech PACKAGE NO. 6 - ANGLE PLATE, VICE,SURFACE GAUGE A Angle plate adjustable 250x150x175 3 2500 7500 3 A Angle plate size 200x100x200mm 3 2000 6000 2 1 A Angle Plate with slots 200mm 3 2000 6000 3 A Bench vice 125 mm jaw 25 100000 A Clamp toolmaker 5cm and 7.5 cm set of 2 4 3000 12000 4 A Compound angle vice (standard sine) 2 3500 7000 2 A Hand vice up to 3.75 cm 2 170 340 2 A Leg vice on stand 150 mm 6 3500 21000 4 2 Machine Vice 100 mm Jaw ( For Drill 4 2500 10000 2 2 A Machine) A Machine vice 15 cm. 2 2500 5000 2 A Machine vice 160mm swivel base 4 4500 18000 4 A Machine vice 200mm swivel base 8 4500 36000 8 A Pipe vice 100mm 2 1500 3000 2 A Table chuck 75mm jaw swivel base 2 5000 10000 2 A Universal Surface gauge 250 mm arm 5 500 2500 3 2 A Universal table angle plate 2 1500 3000 2 A Universal vice 2 1500 3000 2 TOTAL 250340 PACKAGE NO. 7 - SURFACE PLATE, SHAPER TOOL A Plate surface 45 x45 cm.CI/Granite. 3 4500 13500 3 A Shaper indexing center 2 5000 10000 2 A Shaper tool holder turret type 4 3000 12000 4 A Surface plate 400mmx400mm grade1 1 10000 10000 1 A Surface plate 60 x 60 cm 2 6000 12000 1 1 TOTAL 57500 PACKAGE NO. 8 - ANVIL, SWAGE BLOCK, SOLDERING IRON A Anvil Stand. 4 500 2000 4 A Anvil 50 kg. 4 5000 20000 4 A Base chuck for slotter 2 12000 24000 2 A Blow lamp 0.5 liter 10 350 3500 4 2 4 A Flatters (rodded) 55 mm squares. 4 6000 24000 4 portable hand blower 38 cm to 45 cm. 2 2500 5000 2 A A Soldering iron , copper 280 gm (Fire heated). 2 150 300 2 Soldering iron copper 225 gms ( fire hated 4 150 600 4 A 150 mm and 200 mm) A Swage block 35 cm x 35 x 12 cm 1 5000 5000 1 A Swages top & Bottom 12 mm/ 19 . 2 5000 10000 2 TOTAL 94400 PACKAGE NO. 9 - V BLOCK, BORING TOOL etc. A ‘V’ block 75 x 38 mm pair with clamps 6 800 4800 2 4 A Angle truing attachment 2 3500 7000 2 Block – Vee pair 7 cm and 15 cm with 2 600 1200 2 A clamps. A Boring Tool holder for 6 mm sq. tool bit 20 300 6000 20 A Dog Carrier 235, 50 and 75 mm (each) 24 300 7200 24 A top & bottom 6 mm,9mm (Pair). 4 2500 10000 4 A General purpose puller 2 2000 4000 2 Knurling tool revolving head( Rough, med, 4 2500 10000 2 2 A fine) diamond and straight (2sets,6sets) A Lathe Mandels (Diff.Types) 2 300 600 2 A Magnetic Chuck 150 mm dia. (Circular type ) 2 2500 5000 2 A Radius truing attachment 2 2500 5000 2 A Solid parallels in pairs(different sizes) in metric 24 1000 24000 24 Tool Holder RH & Straight for mm square 4 800 3200 4 A tool bit A Tools bit holder (Amstrong) L.H 6 600 3600 6 A Tools bit holder (Amstrong) R.H 6 600 3600 6 A Vee block 100/7-80-A 1 500 500 1 TOTAL 95700 PACKAGE NO. 10 - BRAKE DRUM, CARBURETTOR, Brake drum spring balance belt etc. For 1 7500 7500 1 A performance testing of engine.(1set) A Brake lining rivetting machine(foot operated) 2 6000 12000 2 A Carburettor. ( Two different types.) 2 2500 5000 2 A Distributor. 2 7500 15000 2 A Dynamo and voltage regulator. (1 each) 1 2500 2500 1 A Equipment puncture, in box. 1 1500 1500 1 A Filling jig for adjusting the piston ring gap. 1 4000 4000 1 A High rate discharge tester 2 3500 7000 2 A Hydrometer 2 150 300 2 A Injectors ( two types). (2 each) 2 2500 5000 2 A Puller set steering wheel universal 2 4500 9000 2 A Puller set universal bearing and bushes 2 2500 5000 2 A Ratchet brace. 1 1500 1500 1 A Ring expander and remover. 1 4000 4000 1 A Ring groove cleaner. 1 1500 1500 1 Spare Grinding Wheel Ajaz type for carbide 4 7500 30000 4 A tool A Spark plug cleaning and testing equipment 2 12500 25000 2 G A Starter motor. 1 2500 2500 1 A Tester sparking plug NEON type 2 300 600 2 A Tool, valve grinding, screw in type. 1 2500 2500 1 A Tool, valve grinding, suction type. 6 2500 15000 6 A Tray cleaning assorted sizes 6 150 900 6 A Tyre changer 2 2500 5000 2 A Valve grinding machine 1 7500 7500 1 A Valve refacer 2 1500 3000 2 Valve seat cutting, tools complete with 1 2500 2500 1 A guides and pilot bar ( all angles). TOTAL 175300 PACKAGE NO. 11 - WELDING EQUIPMENT & ACCESSORIES A Bench hand capacity upto 5 mm 2 1500 3000 2 Cutting torch Oxy - Acetylene with cutting 2 2500 5000 2 A nozzle 3/64 A Earth clamps 20 300 6000 20 A Electrode holder 400 amps 12 800 9600 12 Eutalloy micro flow power welding process 1 7000 7000 1 A Hot A Glass white 108 mm x 82 mm 64 10 640 64 Glasses coloured 108 mm x 82 mm x 3 mm 32 10 320 32 A DIN 11 A 13 A A Grover 3,4,6 mm.(1 each) 1 700 700 1 A Gun, paraffin set. 1 1000 1000 1 Heavy duty cutting and sqouging blow pipe 1 8500 8500 1 A with cutting and sqouging nozzles (1 set) A Lugs for cables 48 10 480 48 A Pressure regulator acetylene Regulators 8 2500 20000 8 A Pressure regulator oxygen double stage 8 2500 20000 8 A Rototec power welding process cold 1 7000 7000 1 A Rubber hose clips 50 10 500 50 Rubber hose pipe black and red 5 mm 30 30 900 30 A (meter) A Spindle key ( for opening cylinder valve) 16 30 480 16 A Spray gun set with accessories 1 2500 2500 1 Welding cables to carry 350 amps with 45 30 1350 45 A flexible rubber (meter) Welding rubber hose, Oxygen and acetylene 1 35 35 1 A 8 mm (65 meter each) Welding torches with 10 nozzles 2 to 45 2 7000 14000 2 A Low pressure with Nozzle TOTAL 109005 PACKAGE NO. 12 - HAND DRILL M/C & SOLDERING IRON A lron soldering 350 gm. 4 250 1000 4 A Portable hand drill (Electric )0 to 6mm. 2 2500 5000 2 A Soldering iron 120 watts 6 150 900 2 4 TOTAL 6900 PACKAGE NO. 13 - MARKEING TABLES, TIMMONS SQUARE A Marking off table 1200x1200x900mm high 2 2500 5000 2 A table 90 x 60 x 90 cm. 1 2500 2500 1 A Marking table 91 x91 x 122 cm. 1 2500 2500 1 A Marking table (CI) 120 x 120 cm 1 2500 2500 1 A Table for surface plate 900x900x1200mm 1 2500 2500 1 A Timmons square 60 cm x 30 cm 1 250 250 1 TOTAL 15250 PACKAGE NO. 14 - SLEEVES Morse Taper Sleeves No. 0-1, 1-2, 2-3, 3-4, 3 5000 15000 1 2 A 4-5, (1 set) Box Reduction sleeve Morse 1-1, 3-1, 4-1, 4-2, 5- 3 5000 15000 3 A 1, 5-2, 6-1 A Revolving Centrer (to suit Lathe tailstock) 5 2500 12500 5 A Scribing block universal 300mm 4 500 2000 2 2 TOTAL 44500 PACKAGE NO. 15 - OIL CAN A Oil Can 0.25 liters 3 100 300 3 A Oil can 0.12 liter. 2 80 160 2 A Oil can 0.5 liter 2 250 500 2 A Oil cane pressure feed 500mg 30 600 18000 20 10 TOTAL

PACKAGE NAME - MEASURING TOOLS (MECHANICAL)

T Q A Sl No Items T C Required Qty. Trade wise R V

Turner Fitter Machi Welder Trac.Mech Moter nist Mech PACKAGE NO. 16 - RULE, SPIRIT LEVEL, CALIPER, DIVIDER B Brass Rule 30 cm or nickel chrome steel 30 cm 6 50 300 6 B Caliper 15 cm hermaphrodite 32 60 1920 B Divider 15 cm spring. 26 75 1950 B Dividers 20 cm 22 75 1650 22 B Engineers square 15 cm. Blade. 4 150 600 4 B Inside spring caliper 150mm 12 100 1200 B Level sprit 15 cm metal. 2 200 400 2 B Magnifying glass 15 cm 8 200 1600 8 B Magnifying glass 75mm 5 150 750 3 2 Rule 60 cm two fold brass tipped to read 26 250 6500 26 B inches B Smith’s square 45 cm x 30 cm. 2 600 1200 2 B Spirit Level 0.05 meter 200m 2 200 400 2 B Steel rule 15 cm. English & Metric 55 30 1650 20 19 16 Steel rule 30cm graduated both in English 34 80 2720 12 22 B and metric units Steel rule 60cm graduated both in English 11 120 1320 7 4 B and metric units B Steel tape 2 meter in case 8 40 320 2 6 B Straight edge steel 1 meter 2 150 300 2 B Straight edge steel 500mm 5 150 750 3 2 B Try square 300mm 2 500 1000 2 TOTAL 26530 PACKAGE NO. 17 - GAUGES 0 0 0 B Centre Gauge com. 60 ,55 and 29 (each) 4 75 300 2 2 Compression gauge to read 0 to 115 kg/sq. Cm and vaccum gauge 0 to 75 cm (1 each) 1 1500 1500 1 B B Compression gauge to read 17.6 kg/ sq.cm 2 1500 3000 2 B Cylinder gauge capacity 6 to 15 cm. 1 2000 2000 1 B 100 mm blade metric set 4 B Gauge imperial sheet 2 400 800 2 B Limit plug gauges 5mm to 25mm by 2.5mm 2 1500 3000 2 Screw pitch gauge with 22 pitches from 9 to B 40 BTPI. 2 360 720 B Vacuum gauge 0 to 75 cm 2 1200 2400 2 B Wire gauge metric standard. 2 250 500 2 TOTAL 14420 PACKAGE NO. 18 - MICROMETERS , SINE BAR B Combination set 300 mm (Complete Set) 8 2500 20000 3 3 2 B Dial indicator to read 0.25mm 2 4500 9000 2 B 0-25mm outside. 6 2000 12000 B Screw Thread micrometer interchangeable 1 1500 1500 B Sin Bar with centers 200mm (1set) 2 5000 10000 2 B Sine bar 200mm 1 2000 2000 1 Vernier Micrometer 0 inch to 1 inch. Outside B Reading 0.0001 inch 2 B WING COMPASS 25.4 CM OR 30 CM. 5 400 2000 3 2 TOTAL 61500 PACKAGE NO. 19 - METERS B A.V.O meter 2 1500 3000 2 B Techometer 2 4000 8000 2 TOTAL PACKAGE NO. 21 - SAFETY DEVICES

T Q A Sl No Items T C Required Qty. Trade wise R V

Turner Fitter Machi Welder Trac.Mech Moter nist Mech Leather apron 4 300 1200 4 Gloves pair leather 22 150 3300 22 Screen welding helmet type 12 150 1800 12 Screen welding hand 21 150 3150 21 Goggles pair welder 20 60 1200 20 Safety boots for welders 20 500 10000 20 Fire extinguishers ( foam type and CO2 type) 13 1500 19500 2 3 2 2 4 First Aid box 2 500 1000 1 1 Welding helmets 6 500 3000 6 Fire buckets with stand 21 200 4200 2 4 3 4 8 Safety goggles (Clear glass).(pair) 102 50 5100 2 4 Chipping screen hand 26 100 2600 26 Leather sleeves (pairs) 17 100 1700 17 TOTAL AMOUNT R

B MM

B MM

B MM

2 Nos Ordered Before for MM

Industrial Trainning Institutes, Hoshangabad